Abandonment wireless Photosmart 5510 [A 7708, 4].

Similar Questions

• an I can cushion of wireless photosmart 5510?

  can I an I Pad wireless connection with photosmart 5510?

  No, you cannot connect to this printer (or the most current HP printers) directly on an iPad without a wireless router.

  If the router is n it is backwards compatible to g.  If it is g, well, then this is g.

• Photosmart 5510 - wireless Mac - printer offline

  Hi there, I am trying to print from a Mac again photosmart 5510, wireless is connected, tested printing via an ipad - runs like a dream.  Unable to print message error "printer is off-line" laptop (Mac 10.7.2), the printer is not connected.  Printed with a cable but I can't via wifi. Have checked all troubleshooting tips, no luck.  advice is appreciated

  Download and install this: http://support.apple.com/kb/DL907

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Wireless Photosmart HP 5510 printer

  I have a laptop Toshiba Satellite with Windows 7 and a wireless HP Photosmart 5510 printer.  It has everything set up in the store where I bought it, but I can't get a document to print from the laptop.  I did a diagnostic check, but she returns as all connected, but I still can't print.  I think I'm something wrong or missing something.  Any ideas, anyone please?

  Contact HP.

• HP Photosmart 5510 'Printer offline' show

  To the right,.
  
  I started having a problem with my HP Photosmart 5510 - running on a Mac OS x 10.6.8 computer wirelessy.
  
  Until yesterday, I was able to print wireless towards her, even when he was asleep he wakes up and print.
  
  Now, however, I get a "Printer offline" message whenever I try to print what he's awake or not and I have to turn on the printer and on again before it prints.
  
  My printer HP utility can see the printer and it is connected to my network.
  
  Any help would be appreciated,
  Thank you
  Ronan

  I found this on the Apache site:

  "You unexpectedly see an Apache HTTP Server installation page when you visit a Web site. If you sent us mail because you have seen a page saying "it worked!" (or something similar indicating that Apache has been installed) on your screen or a Web site you have visited, please go back and READ the page. It must also specify what happens. The page is the equivalent of a demo or the Readme file from a Windows installation of the application; It is intended for the person who has installed the software and is supposed to show that the installation has been completed successfully. The problem you are experiencing has nothing to do with us, and we cannot help you. You must contact the webmaster of the site. If the site is www.foo.com, for example, try to send mail to . If it is www.toddsbeer.org, send an email to . And so on. »

  I think that there is something funny, with (probably your DNS of ISP) your router's DNS settings.  You can enter the configuration of the router and change the google DNS or OpenDNS DNS?

• This issue is still pending. My PhotoSmart 5510 continues to go offline during the generation of printed documents.

  I have a PhotoSmart 5510 and a Toshiba i7 Quad 4 laptop running Windows7 with a Trendnet Wireless router.

  My PhotoSmart 5510 disconnects when printing is generated.    All systems are go: online wirelessly connected wireless, does not not offline, set as the default printer, checkmark, etc..  Sometimes it will make an impression and disconnect and sometimes it will disconnect the first time and will not be printed.

  If I run the diagnostic utility I can usually get it online.  But the said diagnostic utility it is disconnected and the problem is not "resolved".

  It also has a problem with the USB.  If I've set up as a USB printer will crash the entire operating system and laptop computer will not restart unless the USB is disconnected or if the printer is turned off.  This does not happen with my laptop computer on the same Lexmark printer.

  obewan,

  This article should help to keep the Wi - Fi connection (including things like setting a static IP address for your printer to avoid the crash between you OS/router/printer):
  http://support.HP.com/us-en/document/c02817031

  Give the steps described a try and tell us if it helps.

  Good luck!

• Photosmart 5510: photosmart 5510 doesn't scan

  My Photosmart 5510 left scanning for computer (HP Pavilion with wireless connection). I get a msg of unsuccessful scan from the printer and an HP 5510d series is not found msg on my computer.  He still won't print.     I restarted everything.   When I opened the printer from start I get a box Priinter configuration and software with connect a new printer and add more software options.   A ran the full feature software and driver and get msg that I need to insert the disc and the earlier version cannot be deleted.   Ran print and scan doctor and it says Installer get full software not installed.  I don't know what else to try.

  Hi @dmorfy,

  There is a utility called Microsoft mount it that might be able to help to uninstall the old version of the HP Photosmart from your PC software. It is pretty Strait before running.

  Once it's done try to reinstall the software.

  Please let me know how it goes.

  Thank you!

• without the Photosmart 5510 ink cartridges Control Panel cannot be accessed

  I have a Photosmart 5510 which has no ink cartridge. My intention is to use it to scan only, and I would like to be able to set up wireless. When I turn on the printer, the control panel displays this: "problem of ink cartridges.  One or more cartridges appear to be missing or damaged. Install or replace the affected cartridges. »

  The wireless button or the ePrint button cause anything to appear on the control panel and there is no other options, such as cancel or continue.

  Is there a way to go beyond this message of ink cartridges without installing cartridges?

  Hello

  In general, I'm afraid the answer is no, as a multifunction device, it requires the ink required to operate the device but there are of the workarounds you can try.

  That there is a problem with one or more of the ink cartridges should be sorted first, the control panel will not answer while the device is in an error state.

  You try to use the computer temporarily plugging in a USB port on the printer.

  If the printer is recognized by the PC in such a State, let it finish its configuration and open the software HP Photosmart 5510.

  Open the utilities tab and click on Setup & software printer, then click on convert USB to wireless and follow the steps on your PC.

  If this success then run a scan of your PC use.

  If it is not detected, which is likely to be affected by the error status of the device, such you will solve the problem first.

  You can follow these steps to solve a problem of cartridge if necessary:

  http://support.HP.com/us-en/document/c02924284

  Kind regards

  Shlomi

• hp photosmart 5510 series: photosmart hp 5510 series files are not found

  Hello

  I use the Hp Photosmart 5510 series printer and is faced with a problem where I can not scan from the printer to the laptop. Before having this problem, I used to scan from the printer wireless without any problems, but after I changed my Internet brand and speed, the printer keeps saying "to ensure that the printer software is installed on your computer and this 'scan to computer' is activated via the printer software" even if I have already connected the printer again internet. I have the printer software on my laptop, but it does not work. When I try to click on scan of the computer, the computer used to say "files series hp photosmart 5510 are not found". I tried to change the IP address, but that didn't work either. So I don't know what to do now. Also, I tried to use the USB cable and it worked, who showed me on the printer, I can scan wirelessly or via USB. When I tried with the USB key attached to the laptop, wireless the wireless worked (as well as the USB port), but when I took off the USB cable, it did not work. Help, please

  Note:-J' formatted the laptop and operating system went from vista (original) to the Ultimate, which helped to improve the performance of the laptop. -What is has everything about the problem?

  Welcome to the HP community @Blizzerd,

  I wanted to answer your question to have the printer connect and work on your network wireless 'new '. I think that if you uninstall the printer and reinstall the printer software and continue through to set up the printer on your network, it should work for you.

  Here are the steps for you.

  1 uninstall the printer software, and then restart your PC.

  2. click on this link, select Windows 7 and follow all the steps to install and reconnect the printer: HP Photosmart 5510 and 7510 printers - setting upwards to a wireless network

  Test print and scan and let me know what happens! I hope that does the trick

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  Good luck!

• Server connection error:-1 there is a problem connecting to the server... hp photosmart 5510

  HP photosmart 5510 e - while a printer B111a

  Windows vista 32-bit

  connection error message-Server error:-1 there was a problem connecting to the server, press Retry or ok to continue

  No changes have been made to my operating system

  Try to add new applications with eprint center of my Compaq Presario CQ60 laptop to my HP printer. Computer tells me that the new applications are there and ready to use, but printer says 'server connection error "? I followed all the instructions to connect to the wireless router, but I'm not sure how to connect to the "Server"?

  The steps below a usually resolve the problem you are experiencing:

  1. unplug the power cord at the back of the printer.

  2. unplug the power cord at the back of your router (and the modem, if they are separated from the router).

  3. wait 20 seconds, then plug the router (and the modem, if necessary) in.

  4. wait for 30 seconds, then plug the printer back and power.

  5. press the button on the front of the printer ePrint, and it should try to connect to Web Services again.

  These steps usually fix the problem, but if it persists, you can try definition of network information static for the printer (which is sometimes useful to stabilize the ability of the printer to get outside of your network to the internet):

  1. tap the wireless at the top of the screen of the printer and note the IP address.
   
  2. Enter the IP address in the address bar of a web browser on a computer and press on enter or click the go button browser.
   
  3. the printer status page must be open.  Click network in the upper part.
   
  4. click on networking on the left.
   
  5. Select the Proxy settings.
  Note: If you are prompted for a redirect, click OK.  If you receive a certificate warning, select the option that allows you to continue anyway.
  If you receive an internal system error, refresh the page until it loads the proxy settings.
   
  6. check that all fields are empty.  If they are not, make them disappear and make sure that the Proxy Server requires authentication is unchecked and click on apply.  You should get a success message.
   
  7. click on the network address (IP) on the left.
  Note: If you only configuring IP address and DNS address with a yellow note Configuration, refresh the page until it loads completely.
   
  8. leave automatic IP IP address Configuration.
   
  9 change the DNS address to the manual DNS Server Configuration.
   
  10. enter manual for the manual preferred DNS Server 8.8.8.8 and 8.8.4.4 for auxiliary DNS.
   
  11. click Apply and you should get a success message.
   
  12. turn off the printer for 30 seconds and then turn it on again to force the new settings take effect.

  Let me know if you have any additional questions. Thank you!

• Not able to scan from the printer to my computer control panel using the HP Photosmart 5510

  Hello

  I recently bought the new HP Photosmart 5510 all in one - and I am not able to scan from my printer to my computer.

  I am however able to scan by launching the scan of the computer. I talked to HP customer earlier this evening and we ran printing + scan doctor and can't find any problems.

  I am running Windows 7-64 bit and that you have installed my wireless printer using the Installation CD supplied with the printer today.

  I could not finish troubleshooting with the technician that I talked to because I had to go to work. The person that I spoke with proposed possibly the full functionality of software downloaded from the hp.com site, which I'm happy to do, but I think that it is useless, because I have the CD of installation here. (The rep that I talked to was very nice, but I prefer not to have to uninstall and reinstall if it is not necessary)

  Because as I mentioned above, everything works perfectly and I am able to scan - but not directly from the printer itself.

  When I try to scan from my printer to my computer an error message appears on the control panel of the printer indicating that: there is no scan destination options of analysis chosen / no..

  However, I can't find anywhere with my HP software where I could add / make sure that the destinations were there. (As I could on my other printers. (IE. By the solution Center)

  This printer does not appear to be a solution center that I could find and the scanner installed with the CD icon doesn't give me any options regarding changing the settings of the parser

  I wonder:

  1. the Hp Photosmart 5510 does not have the capacity to scan from the printer control panel?

  2 OR the CD installation provided with my printer only has the base drivers as the agent of tech support suggested? Which means to scan from my printer I need to download drivers for your hp Web site?

  3. or is the problem because of something else entirely?

  Thanks for your help!

  HI Dublin,

  Follow the steps below to uninstall and reinstall the printer.

  1. open Control Panel

  2. click on uninstall a program

  3 uninstall the Photosmart 6510 in the list

  4 restart your computer

  5. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  6 download the drivers and full software functionality, and then reinstall the printer.

  Version 28.8

• do not install the driver for XP photosmart 5510

  I tried in vain several times to install the driver for my refurbished XP for my laptop HP photosmart 5510. I said I want to install via radio - he finds the printer and lets me select - then it starts the installation.  It gets about two-thirds through the bar of "installing network printer." "and crashes.

  I let it rest, go to walk my dogs, prepare dinner, and it moves of there.  When I click on cancel, it crashes during the phase cancellation and I'm relegated to "force quit" process.  It's annoying!  All I want to do is wireless printing.  Scanning the computer would be an asset.

  BTW, I had NOT of PROBLEMS installation on laptop of my wife under System 7.

  Help, please... Thank you

  Docswan

  Hi docswan,

  I can't wait to hear that you are experiencing installation problems.  The following steps may resolve this problem. You can also view documents related to this issue by clicking here.  If you are unable to install the full features software, a generic driver can be installed via windows to enable printing only.  Here is a link that will provide the steps to do this.  Click here

  1. connect a new printer.

  2. the software freezes when "control network.

  3 allow software to sitting there for 3 minutes (to fill in the background).

  4. go into the Task Manager process tab.

  5. complete the process of HP network Communicator.

  6. This should push the software to a point to choose wireless or Ethernet.

  7. Select Ethernet or wireless depending on connection.

  8. Enter the IP address manually in the appropriate box.

  9. the software freezes probably during the 'network of control' all or part way through.

  10 allow software to sitting there for 3 minutes (to fill in the background).

  11 go into the Task Manager process tab.

  12. end of the process of HP network Communicator.

  13. This should push the software before saying that the printer cannot be installed correctly, but can be installed via the IP address.

  14. click "continue".

  15. the software should continue and give a green check mark.

• driver installation failure on photosmart 5510

  I am trying to install my photosmart 5510 on a new computer, Windows 7 (64 bit) operating system. everytime I try and go through all the steps of downloaded I get an install error - failure of the HP Installation - MSI 1603. Cannot get past. The printer is configured on a wireless network and that works, just can't get the driver to install. I tried to remove the program and he can't delete because it is not installed correctly. It seems very circular. Any ideas?

  These install failures can be no fun. Looks like you may have a few things underway.

  You indicate that the software cannot be uninstalled. Where are you try uninstalling to?
  * The best place to remove the HP printing software that won't remove is through the control panel > programs > uninstall a program.
  * If the printer software still cannot be removed in this way, you can find a Microsoft Fix It solution. This program will help with software that will not uninstall.

  Also, you have found the failure of Installation of HP - MSI 1603. It is indicating that one of the MSI (Microsoft Installation) files fails to run. MSI often fail if the permissions are not correct as well.

  There are a few measures that take to this error:
  * Press Windows + R key to the "Run" command
  * Type msiexec.exe to confirm MSI Version 4.5 or higher. Below if the 4.5 Version, stop here and answer to get instructions on how to update MSI.

  If MSI Version 4.5 or higher:
  * Press Windows + R key.
  * Type msiexec /Unregister and press ENTER. If it works, there is no message.
  * Press Windows + R key.
  * Type msiexec /regsvr and press ENTER. This will confirm that the MSI is working.

  Remove all remaining files:
  Open the C: drive > Program Files (x 86) > HP folder
  * Delete the folder with the Photosmart series 5510 in the title. It is to ensure that all remaining for the printer software has disappeared.

  * Press Windows + R
  * Type %temp% , and then press ENTER.
  * Delete all files starting with 7z. It's remove for installation failed installation files.

  Now to install in:
  * Make sure you are using the administrator login
  * Download the most current driver for your printer.
  * When you run the downloaded file, make sure you right click and click on run as administrator.

  Photosmart HP 5510 is not that old of a printer. I guess that this printer is still under warranty. If these steps do not address the issue then give the HP Technical Support a call at 1-800-474-6836.

• Problem connecting USB to install HP Photosmart 5510 all-in-one inkjet

  Photosmart 5510 all-in-one inkjet

  Windows XP Pro x 86 (32-bit) service pack 3

  Software installs fine until he asking for the type of connection. The computer does not have wireless so I select USB connection and it fails every time. If I select to connect to PC later and plug in the USB, Windows detects new hardware (HP 5510) and asks where to look for drivers. When directed to the installation CD "Invalid data" error when copying files. In the Device Manager in the USB section it lists the Photosmart 5510 with a yellow! Selection of reinstall the driver results in an "impossible to install error.

  There is no other printer currently installed on the computer and the 5510 Photosmart is set as default printer. So far I have;

  tried different usb ports

  tried running the installer from the installation CD

  I tried to download updated drivers

  tried to install with disabled firewall and antivirus

  tried to install it in safe mode

  Same problem occurs every time. Any solutions or suggestions would be greatly appreciated!

  Thank you.

  Finally solved the problem. Had an old Pentium 3 machine around the pose and decided to try to change the disk hard on and see if I could install the printer with a different material.

  It turns out that the mup.sys file, which has something to do with PnP devices, has been damaged and Windows wouldn't start in the other Tower. Then, I took out the HARD drive and put it back in the Dell can reformat Windows XP and guess what, printer installed without a hitch the first time I tried! Now I have to reinstall everything on the computer * sigh *.

  In any case, the printer problem fixed!

• Printing with the photosmart 5510 and MAC 10.7.2 is a dream? and I don't even go to part scanning

  Wauw, buy a photosmart HP 5510 printer and you are very busy for Christmas together to print wireless?

  Unpack your photosmart 5510 and install?

  Well, it prints 1 page and then you get the message printer isn't ready if you want to print your next page.

  1st day, I try with my own knowledge.

  
  

  Updates

  Reset the router.

  Work with difficult IP put in the printer.

  Change the IP address via the Web interface.

  Change the settings of the router

  Try to reinstall the software which is not even possible that most all do the manual says that it is.

  Still 1 print and then nothing. Reset the printer or change the IP in the difficulty of the printer, labour, still 1 print or scan or 1 airprint but then nothing.

  (printed about 35 pages of BS as test)

  Day no. 2, new day of new towers

  Looking around the God thank you forum I'm not the only one who has this problem.

  A lot of people, same problem, some struggle for 6 months, contact support without success.

  Damm scan I even was going to this party and look at all the users having problems. Allow me to first impression please.

  And right now, it looks resolved advice and try to do the same. No results at all.

  Day still no 2, but I can't download now...

  Come on guys read it all, it seems that you are lucky, when it works. You must be a programmer if it works.

  My main question is;

  -Is this or Steve Job knew this?  This product is in its Apple store, HP uses the Apple logo.

  -Sell HP t - he produced cheap now and get the money back to test everything print and use the cartridges?

  -Are there hope or solution let this work smooth with what the box and ads tell?

  -J' just forgot a small no and someone give me the solution?

  -In a lot of wine in these days of Christmas?

  Hope someone can help me and get this Photosmart 5510 working (printing, scanning and airprinting it says on the box)

  Hi ShiomiL,

  A tried these last few months, a lot of time to get the HP works as it should work (especially the airprinting and scan) without any success.  We used with IP printing/scanning, which wasn't a problem, but does not give us the full possibility of the HP printer.

  Today I bought an apple Extreme airport, connect and a few seconds later all works perfect

  In the end, so it was the TL-WR741N (the latter replaced by apple airport) that give problems.

  I just wanted you to know and say thank you for the support you give.