Time executable stopped working at startup

Similar Questions

• Time executable stopped working

  Last week, I started getting a message error at startup which said 'time executable stopped working. In the forum, I noticed that others had the same problem. Using msconfig and by disabling some startup (by the process of elimination) items, I've isolated the problem to a file called DLCGCATS. Although I stopped now that file to load (and the creation of the error window), I want to fix it or remove it completely. How can I do? The manufacturer is listed as 'Unknown' and the command for the file is "rundll32 C:\windows\system32\spool\DRIVERS\W32X86\3\DLCGtime.dll, _RunDLLEntry@16. Your help to help me repair or remove this program would be greatly appreciated.

  The solution is:

  1. start-> run > MSCONFIG-> startup.

  2. find the DLCGCATS file and uncheck (disable).

  3 re-boot.

  4 problem disappears at startup

  Please note this file belongs to Dell and I believe that they have granted a new driver that will also solve the problem. Be sure to update all of your drivers if you are using a Dell PC.

• "Show my windows and tabs from last time ' has stopped working after software updated to the end of January or early February. Now on 12.0a2. Change options "Auora to start: ' no longer works.

  I use this feature for years and update Firefox/Aurora in the next few days, maybe a week, an update becomes available and everything suddenly ' show my windows and tabs from last time ' has stopped working. I can go to the Tools-Option-general tab and change "at Aurora startup:" to this option, or 'Show my home page (s)' and now the opening in a new tab single even though I have URLs there. This may mean that this bit is not read correctly. I'm not playing: config, but I watch a few spoken options in the Web and everything looked OK.

  I would uninstall and reinstall it if you think it will solve the problem. I updated Aurora again because this problem started and it remains broken. It is a system of XP with SP3

  PS: I have two other windows with a XP and the other Windows 7. When I had the problem on my primary XP System I stopped to make updates to other systems. Today I updated the two other systems with the latest Auora (skip one or two updates) and both work very well.

  The best way for me to trouble?

  Hey punchcard4rjw,

  Have you tried to start Firefox in Mode safe? Key 'shift' startup of Firefox. If it doesn't happen in Mode without failure, you should read the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems.

  If this does not work, you should look the article How to fix preferences that will not save.

  Hope this helps!

• Photoshop CC 2015 stopped working at startup

  I just downloaded adobe photoshop CC 2015. and when I start it immediately crashes with the message "Adobe Photoshop CC 2015 has stopped working" I tried all the solutions on the problem page , but non of them worked. My PC preferences:
  Windows 7 home basic sp1 64-bit
  Intel i5 4219U 1.7 to 2.4 Ghz processor
  6 GB of ram
  1 TB of HDD
  Integrated graphics Intel 4400 and AMD Radeon HD 8500 M dedicated graphics card. I installed the latest drivers from their Web sites.

  the details of the problem:

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: Photoshop.exe

  Application version: 16.0.1.168

  Application timestamp: 55af6140

  Fault Module name: MSVCR120.dll

  Fault Module Version: 12.0.21005.1

  Timestamp of Module error: 524f83ff

  Exception code: c000001d

  Exception Offset: 0000000000096cd 5

  OS version: 6.1.7600.2.0.0.768.2

  Locale ID: 1033

  Information has additional 1: 096

  More information 2: 096a2e6fc4d77a7a966ff48506139a6c

  3 more information: 5cde

  Additional information 4: 5cded7c753a20d42b6bf4371366ead44

  It's very frustrating. I can't access the software at the time I installed it.

  I installed service pack 1 for windows 7 and now everything works fine.

• Satellite A105-S4254: several keyboard keys stop working after startup

  Hey

  I have a laptop A105-S4254, which is less than a year.
  When I boot it upward a few minutes most of the keys stopped working.
  The F keys will however continue to work.
  I can laugh with the brightness and activate / disable the num lock and scroll but I can't type.

  A number of key just freeze.
  When I reboot the keys work for a few minutes and then stop working again.

  Please help me with suggestions and solutions.
  Thanx

  Hello

  For me, it looks like a hardware problem. Maybe it s the keyboard or keyboard controller itself.
  But first, you must be sure that this failure was not due to a software problem.
  Therefore, it would be desirable to update the system and install the OS from the Toshiba Recovery CD.

  If the keyboard problem appears again, I'd recommend contacting the ASP in your country to control the laptop.

  It seems that the guarantee could be valid for all replacements must be done for free.

  See you soon

• "ArcSoft Daemon has stopped working" at startup.

  When I start my Vista computer, I get a different window that appears and says, "ArcSoft Daemon has stopped working".  It is a new problem on my computer.  There is no error code or other clues as to why this is happening.  When is it display ArcSoft Connect using "Services.msc", it says that it is running and that it is "automatic".

  Do I need ArcSoft Connect Dameon? How I have difficulty or delete?

  (I saw a similar, old question on somewhere else on the forum without any resolution for me).

  Thank you

  http://www.Google.com/search?q=ArcSoft+daemon+has+stopped+working&ie=UTF-8

• Explorer Windows stopped working at startup

  I started my computer and I tried to restart, stop, start explorer.exe but it comes back with this error:

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: explorer.exe

  Application version: 6.1.7601.17514

  Application timestamp: 4ce7a144

  Fault Module name: explorer.exe

  Fault Module Version: 6.1.7601.17514

  Timestamp of Module error: 4ce7a144

  Exception code: c0000005

  Exception offset: 0000000000008b 73

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 1033

  Information additional 1:1342

  More information 2: 13420bd27c162981fad3e5cb129bf9c9

  Additional information 3: c875

  Additional information 4: c8758e9e757cedb06e250fd8e86f510f

  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  -
  Good luck.

• Windows 8.1 "Adobe Illustrator has stopped working" at startup

  I get the error message "adobe illustrator has stopped working" when you try to start the CC and C64 versions?  Have uninstalled and reinstalled also tried invariably Campability settings without change.  Am a member of the cloud and other Adobe programs work very well just seems to make Illustrator.  This is not a Spanish related issues noted in other post.

  You have a Silhouette cutter? If so, that's the problem. I tried every troubleshooting & finally know now, that's all. If you have Windows, navigate to C:\Program Files\Adobe\Adobe Illustrator CC (64 Bit) \Plug-ins (computer, then program files, adobe, illustrator adobe CC, plug ins. remove the plug in that says scp_cc7)

  Then reopen the adobe Illustrator.

• Switch Executive stops working after LabVIEW 2009 installed.

  I just installed LabVIEW 2009 and now Switch Executive 3.0 does not work.

  NISE open session vi returns 0 instead of the valid session ID. It does now with LabVIEW 8.6.1 too.

  Everything looks OK in MAX.

  Any suggestions?

  Hi Pirkola,

  I'll try to replicate that.  I understand it is a returned 0 for a session ID.  Is there an error returned as well?

  Thank you!

  Chad Erickson

  Switch Product Support Engineer

  NOR - USA

• Help: Exit HDMI DTS-DN850 intermittently stops working after startup. OK, after reboot.

  Hello.  I recently started having problems with my SDR-DN850.  Almost every week or so, after turing the unit, no output is available via HDMI.  I get the error "to alert up to now' on the TV. No change on the receiver seems to make a difference (the first time this happened, I spent more than an hour of troubleshooting). After that I did the reset of the receiver (used in the power buttun until it), it works normally again.  Of course, I have to reprogram all my settings.  Then it works very well for a period of time, up to what happen.

  Any thoughts before I have contact support?  It seems that it will be very difficult to correct because it generally works very well.  I fear an endless cycle of management of sending the camera, they are doing something, get back, reoccures problem after some time, send it again, etc.

  Thanks to a bouquet.

  Hello AutomaticEight,

  Looks like the hand like a common problem where the HDMI output has been changed accidentally.  In the upper left corner of your remote is the HDMI output button.  If this button is pressed accidentally, you can as long as you mention.

  Whenever you press the button, the output will be switched as follows:

  HDMI A - HDMI B - A + B - HDMI HDMI OUT

  If you use only the HDMI A Output on your receiver STRDN850, being in the B HDMI or HDMI OUT both will appear as a No Signal on your TV.  You can check the current status on the display of your receiver.  To 'recover' the cycle of the HDMI return to your A. HDMI output

  Hope that this is sufficient,

  Chris

• After having the Windows updates, Windows 7 displays error gfxui.exe stopped working at startup.

  I use windows 7 on a new computer.  During the first month, everything was fine.  Updates have been downloaded and installed without any problems.  However, recently, after an update to windows, my computer started running very slowly.  After the restart, it took a lot of time loading of windows.  When he did, I got the message that gfxui.exe had ceased to function.  This now happens on every reboot.  My computer is slow and does not load correctly.

  Its related to the graphics card intel, it probably means that you have installed recommended updates (drivers)

  Access your site from PC manufacturers, for your model and update the chipset drivers & chart

  Then, in Windows Update > settings disable the recommended updates, leaving only important selected updates

• Adobe photoshop cc 2014 has stopped working (at startup)

  It was the event of the error log:

  Description:

  The failing application name: Photoshop.exe, version: 15.2.0.236, time stamp: 0x542531ba

  The failed module name: igdfcl64.dll, version: 8.1.0.2932, time stamp: 0x50c924e2

  Exception code: 0xc0000005

  Offset: 0 x 0000000000809283

  ID of the process failed: 0 x 1900

  Start time of application vulnerabilities: 0x01cfecb2790603a3

  The failing application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe

  Path of the failing module: C:\windows\SYSTEM32\igdfcl64.dll

  Report ID: cd981be5-58a5-11e4-beb5-681729083fd0

  Faulting full name of the package:

  ID of the failed package-parent application:

  I have an Intel HD Graphics 4000 (pilot: 9.17.10.2932) and I think it's the most recent driver. I don't know why it crashes and I would like to know what I can do to solve the problem.

  Thank you.

  Yes, and as you can see it - your Intel video card driver crashed.

  Update your video card driver Intel since Intel (NOT Microsoft or a system integrator) site.

• "winrscmde has stopped working and was closed".

  6 months get more messages-popup "winrscmde has stopped working and was closed" - other problems with adobe, launcher hook antispam OE, consumer software customer, internet micro-low utility of seizure and windows host (rundl32) process all have in time has stopped working - I followed most of the suggestions sent to me and no result - spent money on drivers and norton and just tired that - using Windows Vista Edition Home Premium

  Hello

  I suggest you run the Microsoft FIXIT from the link below and if the problem persists
  Troubleshoot Internet Explorer to IE quick, safe and stable
  http://support.Microsoft.com/mats/ie_performance_and_safety/
  Hope this information helps.

• Windows Explorer stops working on start up

  Windows Explorer stops working at startup is also other programs stop working

  Hi taz62,

  Follow the instructions in the link below that may help you resolve the issue.

  Error message when you log on to Windows Vista: "Windows Explorer has stopped working".
  http://support.Microsoft.com/kb/937093

  Check whether the problem is resolved.

  If the problem persists, please follow the instructions below to start your computer in clean boot mode.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  You can check the event viewer for error codes.
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• How can I get rid of "sos email stopped working on boot up.

  at the start I constantly get a message "sos messaging has stopped working" I don't know what it is or how to get rid of. I have used all available with my advanced system of care.  anti virus cleaner slim smart defrag 2, iorbit malware remover, spy bot search. older files and large complete systems check scans and scans, registry cleaners, I'm out of options and many require assistance

  Hello

  Welcome to the Microsoft Community Forums. We are happy to help you with any problem related to Windows.

  Description of the question, we understand that you wake up message "SOS messaging has stopped working" at startup.

  If you could answer a few questions that would help us resolve this problem:

  1. don't you make changes to the computer before the show?
  2. you use any software related SOS?

  3. you use SOS Online backup software?
   
  This pop up is probably due to left-over something you already had additional files installed on your computer.

  Here are some ways you can follow to resolve the problem:

   
  Method 1:
  Check if the problem persists in safe mode.
  Check out the link:
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-in/Windows7/start-your-computer-in-safe-mode
  If the issue is not still in safe mode, and then start the clean boot computer to determine if a third-party program is causing the problem. To configure your computer to clean boot see the following link.
  http://support.Microsoft.com/kb/929135
  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting"
  under more information to prepare the computer to start as usual after a repair.
   
  Method 2:
  If you use SOS Online backup software you can try uninstalling and reinstalling it and check if this may help:

  See the link below for the procedure:

  http://Windows.Microsoft.com/en-in/Windows7/uninstall-or-change-a-program

   

  Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.