Time used to synchronize even after replacing the battery.

Similar Questions

• I have to reset the charge cycle counter after replacing the battery?

  I had a defective power adapter, running on the number of cycles of load on my battery.  Thus, it no longer accepts a charge.  I have been running only on AC for over a year now, but finally decided to replace the battery.  What are the steps to reset the counter after replacing the battery?

  Replce just the battery, the battery will communicate the number of cycles to the computer. No adjustment is necessary.

• HP G62 Note book: battery Cmos missing message even after replacing the new battery.

  At the start screen gives the message that "primary (internal) battery low. (601). I replaced the battery. But still the error code appears. Please help me to get rid of the problem

  Sorry @vipan44

  It is not the battery of the BIOS/RTC is the MAIN battery.

  Judgment of the laptop.

  Remove the MAIN battery.

  Now, try to start with only the AC adapter.

  The error disappear?

  REO

• blue screen after replacing the battery and charger / need of Windows XP Pro disc

  Hi all.

  I bought a used laptop from gateway with Windows XP Professional already on it. The person I got it never gave me the disc of Windows or textbooks and it is out of warranty. I had to replace the battery and the charger after 3 months of use, and it now gives me the blue screen.  I can't enter in safe mode, it gives me just all sorts of codes for Win32 /? (different things). SYS. The blue screen also tells me if this keeps continues to go to F8(Advanced Options), and then choose the option. I called my local tech and he said contact Windows to get a disk to fix the problem. How can I do (I'm not a comp WIZ). So I try here to get any help. I am on a borrowed laptop so if you can help, please send me a personal email to * address email is removed from the privacy *. I get their

  After reading the owner's manual for the NX260X (Chpt. 7, p. 72-74) I am convinced that the laptop, as previously indicated above by PML, is originally came with Windows Vista.
  http://support.gateway.com/s/manuals/mobile/8511886.PDF

  In addition, according to the instructions of the manual recovery (pg.74, means only available recovery Windows are re - install using the supplied DVD.) This is meaningless given that bridge claims the recovery partition was part of laptop computers sold after November 2004.  I agree that, if you decide not to try to fix the errors, you should consider Windows 7.

  However, personally, I would try to fix the mistakes here before you spend a minimum of $100.00 for Windows 7. We usually have a pretty good success rate when the OP stays with the subject.

• HP 3050 printer prints not clearly even after replacing the color and black cartridges...

  I have a problem on a HP 3050 printer all-in-one that is just a year old.  The printer is not used for several months and it was working properly before.  I tried to print a page and had missing horizontal print, I tried to clean the print heads and it did not help.  I replaced the cartridges with new ones and noticed that the ink levels showed that had the old cartridges.  Black was half full and the color was full.  It wasn't new purchased in-store cartridges refills.

  I tried to force an alignment page on the maintenance of the printer screen and this failed repeatedly, undetected alignment page.  I did some research and even tried to clean links them / connectors than cartridges fits.  Looks like that leaving the cartridges for several months in the printer was bad and that I'll need to ge a new printer.

  Thanks for the tips,

  plarr

  document here can help to solve the problems of print quality in your Deskjet 3050 has. I also suggest to clean the cartridge and printer electrical contacts as described in this document (for another series of cartridges, but same principle).

• 5s only displaying iPhone not correct percentage after replacing the battery.

  I bought a new battery for my aging (and is about to be replaced) 5 s. replacement was smooth and phone booted up normally display 3% battery life. After about 30 minutes of charge and always shows 3%, I rebooted. It then displays stack of 31%. After another hour of charge and still display 31%, I restarted and it updated to 87%. Now the phone (when it is plugged) keeps stopping and putting into service on its own.

  Someone has an idea of what's going on? If somehow I had not sat cable entirely, could that cause the problem? I am at a loss and looking for help!

  I'm sorry. Your phone is now completely unbearable by Apple or on these sponsored Apple forums.

  Apple sells no parts of the iPhone, including batteries, and the iPhone is not serviceable by the user.

  That said, my suspicion is that the battery you bought is complete garbage.

  Find a 3rd party competent repair shop and see if they can help you.

• Does not print even after replacing the cartridges refilled with geniune ones.

  HP Officejet 8600 more all-in-one. Win 7 and 8.1

  We recently had some inkjet cartridges recharged at the shop [personal information deleted]
  Overland Park Kansas. They worked for a few days then our printer started to show error messages. Since then, we replaced each cartridge with a brand new black cartridge genuine HP, but our printer no longer works. I was wondering what kind of recourse do we have. We were happy with Costco over the years, but we hope that we don't end up having to buy a new printer. We also provide this letter to HP to see what options we have. Thank your for your quick response.

  Thanks for the information. "With this error, I suggest following the actions suggested in this troubleshooting guide: "Printer failure"Message may include a ' 0x610000f6" or "0x61xxxxxx" error Code appears on the printer.

  Since your error has an error code, you want to follow the second option in the document. I would like to know what are the results with as many details as possible.

• No noise even after replacing the speakers

  Original title : NO VOLUME...

  HI, I LOST THE SPEAKER VOLUME I REPLACED WITH NEW SPEAKERS STILL NO VOLUME, I'VE DONE EVERYTHING IN THE CONTROL PANEL DON'T ALWAYS NOT VOLUME. CAN SOMEONE PLEASE GIVE ME SOME INFO... Thank you.

  Start here: http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows

• HP Envy 5530: HP Envy 5530 told to replace the color cartridge, even after replacing with a new one.

  HP Envy 5530 said to replace the color cartridge, even after replacing with a new one.  Printer is 1 year old and I replaced the cartridges several times over the past year.  I am enrolled in the program of HP ink.  I can run the printer mode single cartridge using a black ink only and it works with my pc XP, Ipad, Chrome pc and mobile phone.  My pc win 8.1 will not print anything other than a test page.  Printer on the pc file lists always attention required when you try to print from the pc win 8.1.  I believe that the problem may be related to surface of cartridge for printing inside the HP envy heads 5530.  This part is available for purchase, and if so, where?

  I found a work around.  On the pc win 8.1, it seems that the print request must see a reset of the HP envy 5530 to print mode single cartridge.  I just start the pc and then reset the printer by lifting the hatch for the print heads.  That's all.  Once this is done, the 'attention required' message goes to the loan and it is able to print.  It will open a window, which suggests you add the color cartridge, but it will disappear when printing.  Simply open the door once and you can print until you turn off the pc.

• My printer HP LaserJet 1536dnf printer prints black pages after replacing the toner with a new one!

  I changed the toner cartridge for my printer HP LaserJet 1536dnf with a genuine HP toner cartridge and now it's printing the pages in black.  Any suggestions on how to fix this?

  Thank you!

  Hi @Beaglemom49779,.

  I see by your post that you have replaced the toner and now get all black pages. I can help you with this.

  Have you had the same problem with the printer before replacing the toner?

  It could be a hardware or with the printer fuser problem.

  If the problem started just after replacing the toner then most likely, the toner.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  Number one cause of problems with toner.

  Check if the drum unit for damage:

  1. remove the cartridge of toner product and check that the tape has been removed.
  2. check the memory chip for damage.
  3 examine the surface of the imaging drum on the bottom of the toner cartridge.
  CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.

  His fingerprints on the imaging drum can cause print quality problems.
  4. If you see the scratches, fingerprints, black on the drum, or any other damage on the imaging drum, replace toner.
  5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem is resolved.

  Please call our technical support if the there is a problem with the toner and you learn about a replacement, to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Contact HP.

  Good day!
  Thank you.

• System Restore to factory settings after replacing the hard drive?

  I have a Lenovo ThinkCentre A52, which recently required a change of hard disk and the removal of a defective RAM 1 GB stick. When I bought my computer, it came with Windows XP Pro and the new hard drive that the updated computer has Windows XP Pro, but it seems to be missing a large part of the software (drivers and programs) that originally came with the computer, and even if I downloaded and installed most of them since the Lenovo Web site There are still some problems related to software that I can't fix. Ideally, I'd like to go back just to restore the system to the factory settings using the ThinkVantage Rescue and Recovery program, but I don't know if it will work. All programs and the necessary drivers will be installed again, even if my current hard drive is not 'knows' thereon? I need to get a Windows XP Pro installation CD, if I want to keep my operating system? Also, is it important that my current hard drive is half the previous, or that I now have half as much RAM?

  Thank you

  After replacing the hard drive, the only way to restore it to the State of the plant is using the Lenovo installation diskettes. You can also ask if Lenovo has a solution to your problem without having to reinstall Windows.

  You can download Lenovo drivers if they are not included on the installation disk. The size of your hard drive does not matter.

  Lenovo - call to order recovery disks:
  http://support.Lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=YaST-3P2QYL

• Windows will not start after replacing the motherboard

  To begin, I must say that I am pretty clueless when it comes to computer skills.

  To summarize, I sent my CPU to a repair shop when my computer has stopped working. I removed my hard drive before starting the repairs because it contains confidential data.  They have narrowed the cause to a faulty motherboard and replaced by a new dissimilar.
  At the store, the guy had a vista 64 bit recovery disc so I have it home and tried to fix it. He said it will be a breeze and relatively bug free. As part of the Startup Repair, I tried to drive the Startup Repair, and tests were all successful except one. An error of diagnosis readings

  "Unspecified system configuration changes may have caused the problem.

  Repair action: repair and checking the integrity of system files

  Result: failed. Error code 0 x 490

  time taken = 720023 ms

  Everything I've done has led to a brief blue screen to the Windows loading screen and then it restarts itself.

  I also tried to restore to the previous two points, but it has also led to the square - a brief blue screen after the loading screen and restarts on its own windows. I'm not ready to reinstall vista and I can't afford to do it too, because I don't have enough disk space to perform another installation. Nor am I willing to reformat one of my two disks.

  If you need additional information on the specifications of the material that must be provided, ask me.

  IM at my end intelligence now, and I really hope to solve this problem.
  Thank you.
  Bryan M

  Hello

  I'm sorry, but you have to completely reinstall the operating system after replacing the motherboard with a different motherboard.

  "Startup Repair" is exactly that: a start NOT a repair system repairs

  What has happened, it is the operating system on your hard disk contains the drivers for the old motherboard and does not and you can't change drivers in doing what you do.

  The only way to solve this problem is to reinstall Vista.

  You wipe the hard drive and restart and make sure that the repair shop gave you the disc to install the new drivers of motherboard after you reinstall vista or download on the website of the manufacturer of the motherboard.

  And here a question for you to consider, too.

  If you bought a copy of Vista retail yourself, you can use the method above to a new installation and then install the new disk motherboard drivers.

  But, if your computer is a trademark of purchased manufacturer, HP, Toshiba, etc., you can not change the motherboard that the license of Vista OEM is stuck at motherboard the origin of the manufacturer that it has been installed on and now you canceled your Vista license.

  See you soon.

• Loading the Google's HTTPS version causes Firefox to do 3 background request every 45 seconds even after closing the page.

  Loading the Google's HTTPS version causes Firefox to do 3 background request every 45 seconds even after closing the page.
  With any other HTTPS sites that support HTTP Strict Transport Security (HST), I noticed connection only 1 history.
  How can I disable these background connections?

  Hello, I'm no expert on the matter, but it is quite possible that the spdy Protocol, which is used by google on its secure sites (twitter atm) and is causing the behavior that you have seen.

  "SPDY connections are persistent connections. For optimal performance, it is expected that clients will not close the open connections until the user navigates away from all web pages referring to a connection, or until the server closes the connection. Servers are encouraged from the connections open as long as possible, but can stop idle connections if necessary. »
  http://mbelshe.github.com/SPDY-specification/draft-mbelshe-SPDY-00.XML#RFC.section.2.1

  You can try to disable support for the spdy Protocol in firefox (in all: config) and see if that changes the number and length of connections to the server.

• HP a1250n, radeon xpress 200 question after replacing the CPU, Standard VGA Graphics goes not down

  Recently, I messed up my CPU and bought a replacement (exact same kind). I am running windows 7 ultimate and for about 6 months prerequisites with no problems. After replacing the CPU I get intermittent lock ups, sometimes with a small portion of the screen flashes. I say intermittent but at least every 15-20 minutes. Different programs, different habits, but still the screen freezes.

  I went in and deleted the driver under graphics cards, pick a 'completely remove the option' - it after restarting the system on its own charged for a Standard VGA Graphics Adapter and since there is then no more accidents. Of course the functionality is not as complete, large icons and such, but it works.

  If it certainly seems to point to a driver conflict I think. But for this machine, is there ever any single Vista Windows 7 driver. My skills are not so, but I'm moving.

  Any guidance?

  Hello

  Yes, your PC has integrated graphics controller: ATI Radeon XPress 200, we don't find drivers compatible Windows 7 ATI.

  The BEST OPTION: Buy a video card, then insert it into slot PCI Express 16 on the motherboard to better display and multimedia performance with Windows 7 to a value using else, it looks just like Windows XP

• High temperature after replacing the CPU T2500-> T7200 at T60

  After replacing the T2500 CPU temperature CPU T7200 varies from 70 to 85. It seems high, I think about the replacement of the thermal grease or thermal paste application. What could be better? To finish with the original grey Ribbon and fix a new radiator or better coat of toothpaste?

  orion9727 wrote:
  There was a test done and toothpaste is out near dough more themal.
  Artic 5 should never be used in a laptop.
  He money and this is a no no on mobile cpu.
  Use a no driver or a thermal buffer.

  the gray Ribbon is a preferable themal pad use this WHICH CAME into IT.
  Because maybe a wedge and to finish with this and without contact.

  you upgraded from a 31 to 34 watt TDP watt not much, but he's going to run hot.
  75-80 c is hot Yes, but you have class 65nm cpu will run hot because it is old and a lot of work.
  If you all know toothpaste can served in the tests but I have not use because it can dry out and not sure what exacly.
  heat wise, I do belive in toothpaste is wise very good heat but stick with the gray Ribbon.

  Please do not take into account the (re) post above.

  I used AS5 on thousands of ThinkPads with no ill effects, in fact the opposite. Research experiences minimal posted by other owners on Bill Morrow ThinkPad Forum will confirm this statement as well. Arctic Silver is as good as it gets unless you want to spend $50 for a tube of thermal paste.

  To OP, your machine is running too hot for the processor in question. My 15 "T60p with T7600 is inactive at least 50 degrees C and does no more than 62 in normal use. And Yes, it was AS5 inside.