Timeing TDS 3034 B using Ethernet VISA controls

Similar Questions

• How to get the Session ID of VISA control

  Hello

  1. I was wondering if it was possible to get the Session ID for serial port via the node of the control of VISA property but I am unable to find it, but if I put the probe on the Session ID string is there (see serial_session_id.png). Someone knows a good work-around?

  2 when I browse through the items property of the VISA control I noticed that the General parameters appear twice. It's confusing and I don't know if this is a bug or not (see instr_property.png)

  I use LV 2012 with NI-VISA 5.2

  Hello

  You can do this by using the Reffnum to the VI session.

  Please find attached an example.

  Best regards

  Ion R.

  Be sure to mark the solutions. Congratulations are welcome.

• How my VISA control can communicate with an instrument via TCP/IP?

  VISA controls are my GPIB instrument when I select "Refresh", but none of the instruments TCPIP. I know that the TCPIP instruments are connected because I can their ping.

  If you are looking for how to build the resourcename, we find more here

  TCPIP SOCKET

  TCPIP [Council]: host address:ort:OCKET

  for example

  TCPIP0::1.2.3.4::999:OCKET	RAW TCP/IP access to the port at the specified IP address 999.
  TCPIP::dev.company. com::InStr	A TCP/IP using VXI - 11 device located at the specified address. This example uses the default value for the inst0 LAN device name.

• Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Scenario is,

  1. smart card reader is connected to the VM with card inserted in

  2 initiate a prompt suspension of the VM toolbar

  3. now to resume the virtual machine by using vmrun command into the host machine

  WS t vmrun start xxx.vmx

  Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

  My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

  Kindly help with this problem.

  Host operating system: Victoire 2012 R2

  The VM OS: win 10 x 64

  Thank you!!

  Dear all,

  I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

  VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

  For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

  ~ Surendra

• How does a customer preform connected to an extensive WiFi hotspot using Ethernet?

  How does a customer preform connected to an extensive WiFi hotspot using Ethernet?

  It performs like any other wired device that is connected to an Ethernet port. However, in the case of a WAN, the unit that plugs into the Ethernet port on the extended base station will only get that fast of a signal that the connection between the "main" and "extended" base stations.

  In other words, if you use wireless to connect to the extended base station, there will be a loss of at least half of the potential speed wireless on the network.  A device that plugs into the Ethernet port on the extended base station will get this same speed.

  In order to maintain top speeds on the network, the main and extended base station must be connected together using wired Ethernet wired, permanent.

• Satellite P750 114 - how to start using the remote control

  Hello

  Does anyone know how to start to use the remote that came with my makeup P750 114.
  When I press on simple volume keys + / doesn't seem to work.
  I have the batteries in it but do not know if I have to activate something on the laptop itself to start using the feature.

  Hello

  A remote control that is included with some models allows you to perofom certain functions.
  Using the remote control, you can
  -Navigate and control the media center window
  -Check the video or live tv display
  -Place the computer in and out of fashion "Eve".

  There is a button on the remote control.
  It begins or ends the OS. The functions of this button as your computer's power button. By default, the "sleep mode" is equivalent to powering down of the State of your laptop. to change this click Start-> Control Panel-> system and security-> power options.
  You will find options; do nothing, sleep, hibernate, shut down.

  Hope this helps

• Satellite A100 (PSAARA) - I can not use the remote control

  I used Toshiba A100 PSAARA, but now I can not use the remote control to operate all things?

  Thank you!

  If the remote control suddenly stopped working trying to restore the operating system to an earlier time using System Restore tool.
  If this does not help please let us know.

• How to use the "Toshiba controls" with other players?

  Heey

  I have a Satellite with Toshiba controls. How can I change so I can use the buttons for other media players and not only Windows Media Player?

  A dude sorry for the bad news, but I fear that it is not possible to use the Toshiba controls with another application as with WMP (CD) and WinDVD (DVD)
  I think that the utility was already programmed and designed to use only these two applications.

• Qosmio G40 - which driver can be used for remote control?

  Hello

  Which driver should I use for remote control?

  How to configure with the PC?

  Thank you very much.

  I assume that you need remote control manager.
  This tool is preinstalled on your Qosmio laptop?

• How can I get my Apple TV to use ethernet when it is also connected to WiFi?

  I have my Apple TV 4 connected by WiFi and ethernet. I want to assure you that it uses the ethernet connection, it will be faster, but when I go to the network settings on the TV, I see only the symbol of WiFi and my WiFi network name. If my Apple TV do not use ethernet, I might as well unplug the ethernet cable. How can I get my Apple TV to use ethernet when it is also connected to WiFi? To automatically use the ethernet connection? Is there a way to disable the WiFi connection?

  To use the ethernet connection, connect it.  To use the WiFi, you can access the network.  I bet the two being connected, it will choose the Wi - Fi just out of logic.

  If you want to use ethernet, disconnect the WiFi.

• T430: Cannot change the GPU using the NVIDIA Control Panel

  Hello world

  I recently bought a T430 including a NVIDIA NVS 5400 M. games graphics card (for example, Max Payne 3) used to run fast, using the NVIDIA GPU. Today, I tried to play a video game once more (after having not played for several weeks). Unfortunately, my OS (Win7, 64-bit) assigns the GPU from Intel, resulting in a much lower speed. Using the NVIDIA Control Panel, I can't change my favorite GPU (changes will not be saved). I already run a update of Lenovo and installed the latest graphics driver (296.88), which resulted in no improvement.

  When you start a game, I can choose my graphics manually, but I would like to configure some general settings using the control panel.

  Do you have any solutions?

  Thank you very much.

  
  

• you want to send data using labVIEW to arduino using write visa and the process and to take action using arduino. A

  I want to send data using labVIEW to arduino using write visa and the process and to take action using arduino. After that, I want to arduino to send out necessary via a serial port to labVIEW which should be read using visa read and store in a chain. While I am able to write or read both individually, I can't do it consecutively. I used advanced read and write vi for checking my code, but nothing is helping. The wrong bed 'time delay before execution. " Please let me know where I can go wrong. Also is it possible to write code for hx711 using labVIEW

  1. you need not "\n" on your orders println().  This command adds an end of line character already in the message.

  2. you get the error because you have a loop around your reading.  After the first reading (well technically, the second because of you add an extra line end character), there is nothing left in the port.  As a result, you will get the timeout.

  3. you should really consider using a Structure of the event.  This way you just don't write and read when you press the Write button and you can also use the structure of the event to make the loop to stop.  I also go up to close the port inside the stop-> value Change event.

  

• Why can I not use my labview controls created dll in labwindow CVI?

  I created a DLL in LabVIEW for run of LabWindows/CVI.  The DLL is started very well but I have no control on the GUI.  Why and how can I use this GUI controls?

  I found the solution on the following thread.

  http://forums.NI.com/NI/board/message?board.ID=180&message.ID=36951&query.ID=314335#M36951

• GPF using the Table control

  Hello world

  We use a table control to display the log files. Each row of the table represents a log file entry. In addition to that we have put in place

  Some filter chopsticks (string tonalite) to speed up filtering. This means that only the entries corresponding to these substrings are shown. So whenever the filter options

  changed to renew the contents of the table.

  This is done by DeleteTableRows, looking for entries to display, InsertTableRows and SetTableCellRangeVals.

  It works very well.

  But if we remove all the contents of the table (caused by the filter options) and then hit a button (even if the focus is on the table) you get a GPF on ProcessSystemEvents.

  This occurs only after inserting a large number of rows in the table before deleting all the. For example, a table with 5000 x 2 (rowsxcolumns) reduced to 0x2.

  1 create a table with 5000 x 2 (rows x columns) control elements.

  2 remove all lines

  3. press tab until the control panel to get the focus.

  4. hit Enter for example

  => Crash

  Someone has an idea? We have already 'dimmed' CTRL, but this is not enough to avoid that the focus on the table by pressing the tab key. So, which leads to an accident as well.

  Thanks for the help

  Philipp

  Yes, it is a known issue (396240), although it is not actually on time last updated known issues. Unfortunately there is no good solution, other than just by waiting for a version corrected to be released, which should happen soon.

  Luis

• How to use labview for controlling the HP Network Analyzer

  Hello

  I have a HP network analyzer 8720D connect with my laptop by a USB-Gbspecifications FOR cable. I want to use LABVIEW for control to parser do measurement and data collection. What should I start? Where can I get the labview program to control the parser?

  Thank you.

  Help > find instrument Drivers. Then go to the Instrument Driver Network and read all the links on the use of pilots.