Times print Photosmart C4680

Similar Questions

• The paper feed of my printer Photosmart C4680 does not work

  Hello

  I tried to reset my printer, but the paper source always pulls the paper on an angle and then crashes.  This seems to have started all of a sudden.

  Hi JeaniT,

  If you have the paper guides, set against the paper and that you have cleaned the feed tires there is a good chance that there is a small piece of paper stuck in the paper path causing the paper be introduced an angle. You may need to lift the printer to look at the paper path.

  http://support.HP.com/us-en/document/c01673676

• HP photosmart C4680: HP Photosmart C4680 printer

  Photosmart C4680 printer will print correctly. Problem follows:

  1. Press on print
  2. Printer makes a noise of switch for several seconds
  3. Athens printers normally feeding paper & prints correctly.

  Noise distribution is done before printing each page. Feeds correctly.

  Need help before ruining printer.

  Thanks John M.

  What a pleasure to receive a response. Unfortunately, took all the steps without success. You took note of cliqueti noise that continues after all the inspection. I observe that the rattling noise occurs when the transport is on the right side of the printer. When you move the carriage to the left & with a flashlight, I saw a black glob in the extreme right under where the transport would be. What key it seemed to be a deposit of black as ink. Do not think that this isn't the ink as empty cartridge or showing empty.

  The printer has served faithfully for time Believe + 5 years came for the replacement. However, t would be nice to know how this has happened.

  I thank for the help & you can be sure that the replacement will be a model of HP.

  Thank you venny1.

• HP Photosmart C4680 printer help - makes noise when turned on?

  Hello

  I searched all day for a solution on my NEW out of the box (HP Photosmart C4680) printer.  I decided to use the scan option, so I opened the box and everything out of the box, remove all packing materials and tape, paper, etc.  Now, I plug the power supply cable (not USB), the printer does beep and a beep will sound and the screen comes on and power off.  It's just a blue screen that displays the logo of hp--(tours noir/arrêt et en arrière, encore et encore).  When I hold down the POWER button for 10 seconds, it turns off the printer (and the beep).  Turn it back on it does again ringing for about a half hour.  Then he turns to the language screen if he wants to, but the touchscreen works even not at all to select or scroll through the list.  And then if I open the door of the cartridge, the cradle only slips when he wants to and not all the time (certainly not when it beeps at startup pointing upwards).

  I tried to install the software in the hope that it might help.  But after hanging the printer usb cable once all the software has been installed, it is said that it recognizes not the printer or it is not be able to communicate with him.

  It is out of warranty.  Any help/advice is greatly appreciated!

  --------------------

  UPDATE: I got the shop, and it is considered to be a printer of lemon.  The end.

  Yes. I remove all packing materials, including any Blue Ribbon, that there is none.

  --------------------

  UPDATE: I took the printer in the shop, and it is considered to be a printer of lemon.  Please read and try to help!

• HP Photosmart C4680: my Photosmart C4680 is printing only the white pages

  Hello

  Whenever I try to print something it prints just a blank page.

  The paper through the flow and I heard sounds of printing.

  I tried to clean the ink cartridges, it did not help.

  Please can someone help me with this.

  Thank you in advance,

  Jamie

  I hope that you are well @jamiebally, welcome to the community of HP
  
  I noticed your post on your Photosmart C4680 print white pages and I wanted to stop to share my suggestions to help out you.
  
  Check out this link to fix the problem. If the problem persists, contact HP to see on your replacement options.
  
  The problems of quality of printing to the HP Photosmart C4600-C4700 all-in-one printer series
  
  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!
  
  Have a wonderful day!
  
  Contact HP:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• Photosmart C4680: Photosmart C4680 on homegroup printer-considered, but not scanner

  My home network includes a Dell XPS-18 running Windows 8.1 Pro and a Toshiba Satellite running Windows 7 Home.  Our Photosmart C4680 is connected to the Toshiba by USB.  It is shared and is available on the network.  It is used by the XPS for printing and never a problem as long as the Toshiba's online.

  However, I can't find a scanner.  I used it for printing without having to install any software.  When I couldn't find as a scanner, I have installed on the XPS, the HP software suite which is available for download from the HP site, in the hope, there was a special driver for scanning, which would be added.  But that does not change.

  The Toshiba can scan from the C4680.  And I can connect to the XPS via USB and also find a scanner by, for example, opening Paint.net and go to "file |" Acquire | From a scanner or camera.  But when the printer is shared via network it is not considered a scanner on the XPS, although I can print to it.

  How can I use it as a scanner on the network?

  Hello

  MS Windows alow God a printer or files and folders, there are not any sharing scanner capabilities.

  Scanning can only be done from the PC that have plugged USB cable, to scan multiple computers, you will need a network connected device, it can be done with a USB device.

  Kind regards

  Shlomi

• When I print a page half page print, iam usig a hp photosmart c4680

  What impression itry article printed using hp c4680 printer photpsmrt only part of the article

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP - Photosmart C4680<-- set="" to="" your="" version="" of="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3739150&LC=en&cc=us&DLC=en&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Missing cartridges on Photosmart C4680 printer... It work?

  I have a HP Photosmart C4680 printer that appears in great shape.  It was given to me by a third party.  The two print cartridges and power cord are missing.  I have no idea if this printer will actually print.

  1. Assuming I can start her, is it possible to determine if it will print before you run out and spend the money on 2 new cartridges?
  2. Can I use a power cord to similar research?  I have one who comes from a different model of printer but seems similar.

  Thank you!

  There is no way to determine if the printer print without cartridges from the printer. If the cord will work for the printer you use.

  Let me know how it goes.

• install a printer hp photosmart c4680 without the disc

  I can't get my HP Photosmart C4680 printer to install on my new Dell Vista computer. NORT of disk available.

  Hello

  Go to the HP Support and download the drivers and the correct software for it

  Select your operating system from the drop-down

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3739150&LC=en&cc=us&DLC=en&lang=en&cc=us

• Photosmart C4680: C4680 not print color

  I have now 2 (!) Printers photosmart C4680 and BOTH are printed in color.  In fact, once I found how to access the Help menu, I printed the PQ diagnostic report and the printer status report and the two reports are totally invalid color print.

  The link to the article on print quality given before others with the same question to solve this problem.

  I put in new cartridges, cleaned, etc., but still no color will appear.  However, once, when you print a PDF file, a little bit of Blue appear, but never the Red or yellow.  And that happened only once.

  I use the photosmart with Mac OS 10.7.5.

  Please tell me I can fix this problem or I have to go to another printer?

  Hi @wwplyr01,

  Welcome to the Forums of HP Support! I see you are having problems printing in color 2 printers Photosmart C4680. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Looks like you already did all the troubleshooting, very probably, it is the document that you have already tried, the problems of quality Print to the HP Photosmart C4600 and C4700 all-in - One Printer Series.

  It seems that it's a hardware problem with your printer, because you have already tried new cartridges, with the same results.

  You use genuine HP cartridges?

  If the problem persists, you can contact HP support. If the printer is officer of the WATCH, HP can offer you a discount toward a recovery on a replacement unit. Check the model number and the form to receive a file number for faster assistance.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• How to scan to PDF? I have the HP Photosmart c4680 printer and m7-1015dx Pavilion computer.

  How to scan in pdf format. I have printer hp photosmart C4680 & pc hp Pavilion m7-1015dx Entertainment, using the Windows 7 operating system.

  The computer only allows me to scan all the documents in for example jpeg photo format. My old computer has a program called HP solution center this permit scan me to PDF.  The new configuration of hp can only scan to the size of the photo. How can I fix it, so can scan documents to pdf format?

  Hi, you probably need "Full Feature software and Derivers" at the following link: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=au&dlc=en&sw_lang=&product=3739150#N193 if still does not work. Please try to download and install for free a product called PDF24. You can open this program and import from a scanner, you can also use this program to edit the scanned or as pdf documents. Here is the link to download: http://en.pdf24.org/pdf-editor.jsp best regards.

• problem printer and scanner for photosmart C4680

  When you try to start the photosmart C4680 printer a message to INSERT in CARD MEMORY askes, that I have not and never needed before.

  It does not print anything but empty sheets of paper and wants to digitize uninvited.

  Need serious help, thank you.

  Hey herbst and thanks for the reply!

  I would recommend running the following updates:

  Utility software update from HP

  Critical update: can't find image files or a document scanned once the scan is complete

  Fix printing software HP when upgrading Vista to Windows 7

  Please hold me!

• Photosmart C4680 blurry printing PDF files and web pages

  Hello

  My Photosmart C4680 has only recently begun to blur PDF print and web pages, which are not blurred due to problems of ink, but look as if they were printed during a mild earthquake.   Printing of documents Word and Text Edit

  Since my computer is fine.  I've done the troubleshooting and re-scanned the page alignment - no change.

  I have a Mac running OS X 10.6.8.

  Thanks in advance for your help and Happy July 4!

  I would recommend you do a hard reset of the printer. To do this, use the following steps.

• missing OCR for Photosmart C4680

  Hello-

  Is there an OCR software included with the Photosmart C4680?  I did a full install, but I can't scan to create editable text.  The aid function advises me to select a pdf in text can be added to the output, but this option is not given in the drop-down list.  The data sheet

  http://h10010.www1.HP.com/wwpc/pscmisc/VAC/us/product_pdfs/3739148.PDF

  Speed of scanning OCR (letter) is<34 sec. ="" i understood="" this="" to="" mean="" the="" c4680="" i="" was="" buying="" actually="" has="" ocr!="" i="" looked on="" the="" hp="" site="" and="" got="" the "full="" feature="" software"="" download,="" and="" installed="" it,="" but="" this="" didn't="" help. ="" i="" could="" find="" no special download="" for="">

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=228&LC=en&DLC=en&cc=SG&lang=en&product=3739150

  Any help would be appreciated.

  Thank you

  -Steve

  It works!

  And you were right, I had to uninstall and reinstall the PhotoSmart software before you install the OCR software.  I had updated to version 13 of PhotoSmart 12 version that was on the CD supplied with the printer.  I got the message "OCR application is not required" when I tried to install on version 13.   Uninstall and revert to the version 12 allowed me to then install the OCR.  I'll go with version 12, it has everything I need.

  I think it is strange that HP it so hard.  After successful installation, I changed from a customer who felt he was ripped off (after being sold nonexistent OCR) to a satisfied customer!  HP should at least have a link of his C4680 software page to the OCR software and indicates the software OCR is working on the C4600 series.

  Anyway, thanks a lot rhanman for your help and for the time and effort in replying to my query.  I greatly appreciate it.

• HP Photosmart C4680 problem

  In recent days, I noticed that my Photosmart C4680 is blower bike itself on and off.  Anyone else have this same problem?

  Does anyone know why its doing?  Y at - it a solution?

  Just do the repair. It was a bad capacitor on the logic board (TEAPO brand). There's that one to replace on this printer and it will probably look like curved on top (which indicates which are blown).  It is 330uF 6.3V, but I got in a little bigger (16V, whatever they had in 330uF) and it works perfectly now. It's an easy fix, if you aren't afraid of soldering a component. It will cost about 60 c with a value of components. (and a kit of solder so you do not have a)

  Open the scanner cover and the door of replacement ink. Reach behind the control panel and gently push a clip for the exit sign. He will reveal a hidden torx screw. There are four total screws to remove the top, and you can use a torx bit, or if no practice, the right to an allen key size.

  Once you get the top up the rest of the printer, you must pull carefully on some connectors that attach to the logical map of its orbits. Some are simply Ribbon connectors and some wire connectors. Set the top aside.

  Identify the bad capacitor on the Board by checking the upper surface. It is a green, a thin color that says TEAPO on it and if it is indeed the defective component it must feel to be curved on top.

  Remove all the other connectors on the Board and unscrew 3 torx screws to remove the Board of Directors of the printer.

  To unsolder the bad capacitor, it can be easier at first it break so you can extract each lead with pliers, one at a time when the application of heat on the side welding.

  Respect the polarity, the negative side (identified by the sign on the new capacitor less) on the shady side to the Board of Directors.

  Solder the new capacitor, clip wide leads, any excess back together. Your ' e did!   Good luck!