TMS Meeting Manager AMM assets?

I installed TMS 15.1 and TMSPE 1.6 on Server Win 2012.

All the pre-requisited are met, but the AMM Active Meeting Manager is not displayed in the Smart Scheduler interface.

I don't see the group settings to allow access to the AMM.

Something that I forgot to activate?

Ah, you don't have a CMR put in service to your TMSPE account.  Take a look at the "Meeting in Collaboration rooms deployment" section of the 1.6 TMSPE Deployment Guide from the pg 49.  When you have a CMR put in service to a group of users under systems > Provisioning > users, you should see something like the attached screenshot.

Tags: Cisco Support

Similar Questions

  • Using TMS to manage several microcontrollers

    You can use TMS to manage several microcontrollers, say some microcontrollers for ad hoc conferences and other microcontrollers for planned?

    There might be better ways to achieve this goal, but off the top of my head:

    1. You can assign some microcontrollers to the same area of the IP assigned to endpoints, these would be used for conferences scheduled, while the remaining MCUs are assigned to a different area of intellectual property and used for ad-hoc conferences.  Different areas in mode using IP will keep the ad-hoc MCU are not used by TMS in scheduled conferences.
    2. You can keep the area of intellectual property the same for all the MCUs and endpoints, but disables the option 'Allow booking' for the ad-hoc MCU, this will prevent ad-hoc microcontrollers are used in scheduled conferences.

    That's all assuming that you're not plan calls, ad hoc, but just let the user to the ad-hoc MCU connect from the endpoint.  For tracking, you can use CCC to follow planned and ad hoc conferences on microcontrollers.  See the 'Routing' section on page 32 and "CCC" section on pg 181 in the TMS 15.2 Administrator's Guide.

    Conductor would probably be the best solution here to help manage multiple microcontrollers.

  • BETTER MANAGEMENT OF ASSETS

    Hello

    some of us out there deal with quite complex sites.

    Let's say that we work for a small gallery of Art, but with a lot of image collections to display.

    What would be a good strategy to work effectively in what concerns the management of assets?

    Here is what happened up yet:

    Pick up a bunch of images from the Finder and place them in my layout leave all appear in the active panel.

    Great, they are here.

    But also bad in a way. What I'm looking for an image? Highlight. Scroll... Always scrolling. … Looking for a particular image is long. And he gets a big ridiculous amount of time, as soon as you have to process batches of images (e.g.: 70 or more) within an entire project.

    At that time, I thought it would be a great idea to gather the images in a folder hierarchy similar to that on my Finder - making it so much easier to pick up my content. But the active Panel cannot create folders. (Strange: why not?).

    So, I took a glance on the library panel. It allows to create folders, but I have to go and fetch each unique bouquet of images in the layout, before sending them to the folder via the context menu. In other words, I must first look to the components Panel, in order to go-to-the-use the instance, then I send the images via the library. That is not sensible in terms of efficiency.

    Why there is no simple prompts, that brings the images from the Finder, in a structured customed library?
    Am I missing something regarding the use of the viewfinder? Something that makes it easier to work with images stored outside the project?

    Advice would be much appreciated!

    G

    I replied to your previous post with suggestion to create the picture library, as you mentioned it already it is the only way to go with. In case you use BC then you can use the modules of photo gallery and add to your pages.

    Please do not hesitate to add your suggestion in our ideas section.

    Thank you

    Sanjit

  • How to manage the assets Conference on Telepresence server controlled by the conductor

    Colleagues, Hello.

    How to add additional participants to the already begun scheduled conference or permanent on Telepresence server controlled by the conductor? Or so... How to make the call to the Conference on the telepresence server controlled by a number of additional connected participants of the conductor?

    I do not know the TMS, but I do not see active conference control features in its options. On the telepresence server, there is limited management capacities.

    A driver controlled TelePresence server has no conference control what so ever, as its all managed by TMS. In TMS you use Conference Control Center under surveillance to manage the scheduled conference. Conference ad hoc permanent that's not demand through TMS, endpoints will have to deal in itself.

  • Adding the Polycom HDX to the TMS system

    How can I add a Polycom HDX system in TMS to manage?  What, if any configuration on the Polycom system must be made, or in the TMS?  Can't seem to find any documentation about it.

    http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/TMS/interoperability/Cisco_TMS_Product_Support.PDF

  • Question about commissioning of the E20s - CUCM and TMS

    If we now run software CUCM 8.6.2 and 4.1 E20.  I played with CUCM and TMS supply by and a few questions.

    It seems that there are some features that can be set via the TMS models that cannot be resolved via CUCM (MTU, custom, etc commands).  Is it possible to apply these settings through TMS while having the unit registered in CUCM?

    Essentially, I want my call recording platform CUCM and control, but want to keep the granularity that TMS offers in terms of commissioning etc..  I expect the same problems with C-series, etc.

    Am I right in saying that, in order to get the E20 to join CUCM, I need to define the external Manager to "CUCM", and thus eliminate any possibility of TMS to manage? Otherwise, what is I could have managed by TMS and then set the SIP of the E20 to point to CUCM via templates in TMS?

    Any tips on that?

    Hello

    Having both TMS and CUCM to manage endpoints is not a good idea (yet). TMS and CUCM will return to each of the other toes with unpredictable results.

    With TMS 13.2, I understand that you should be able to import the CUCM in TMS and then find all systems registered to it and import these into TMS, however in this case TMS plan only systems conferences and will manage them not active (you can see status of the call as well).  13.2 TMS is not yet released, so that's what I said must be in this version.

    So basically now if you use CUCM, use CUCM provisioning and don't use TMS.  We focus on interactions with systems registered with CUCM TMS and it will be more developed on this in the future.  I recommend you check out the TMS13.2 release notes released to see if it is mentioned.

    Thank you

  • TMSPE and directly managed device

    Hello

    If we have a TP network with the following

    -SX20 5

    -C60 2

    -MX300 1

    -100 users (Jabber video)

    -5 EX90

    -1 control of VCS

    -MCU 1

    -1 VCS Expressway

    -MSD 1

    I know that, in order to manage devices, to add ICA-TMS-25 (we have more than 10 devices).

    But what is the advantage of buying LIC-TMS-PE-XX.

    Thank you for your help

    Best regards

    Salim

    The LIC-TMS-PE-25 would be for 25 aircraft in service. You want to ICA-TMS-25 for 25 additional systems for TMS to manage.

  • TMS licensing provision

    Hello

    Can someone explain how the VCS/TMS system manages license Award for customer MOVI?

    For example, we have 25 licenses of provisioning TMS extension. This TMS reports 15 licenses provisioning and 10 used available licenses.

    However, I can see through the VCS that we have at least 18 MOVI registered accounts with only 3 active in calls. I can't understand how the MSDS reports licenses.

    I have to add 100 other users to MOVI and need to understand how many licenses to buy - as appropriate.

    I'm just assuming that customer MOVI uses only licensed in call - and I could have 1000 users registed with MOVI on a TMS 25 provisioning County of license?

    Thank you

    Stem

    Hi Rod,

    I can't speak for why you get the discrepancy in the number of users Jabber (Movi) connected in accordance with the MSDS and VCS, but I can answer the part about how many licenses to purchase.

    Is the way you need to look at, but a lot of people, you expect to connect to Jabber (Movi) at a given time, is license how much you need.  As each person logs in, they will consume a license, detached from all of the available licenses.  When they connect, that licenses they took, will now be free and available to be used by someone else.  Make sense?

    Something to note on the VCS with light records more than what MSD reported as being used and available, is to check if any duplicate records, and look what the address is displayed, such as:

    SIP:[email protected]/ * /: 60248. transport = tls

    SIP:[email protected]/ * /: 60248. transport = tcp

    I saw sometimes a user will register twice, but under different protocols, note the tls and tcp at the end of each pattern to address, as indicated in the State > inscriptions on the VCS.  I can't say for sure, but maybe it's what you see.

    I hope this helps.

    Patrick

  • TMS + CUCM telephone directories

    Hi all

    When you work with a complete CPU, composed of the following deployment:

    • CUCM (8.6/9);
    • VCS-C/E;
    • MSDS;
    • Jabber for Windows (CUCM);
    • Active component URI between CUCM and VCS.

    Ideally, in this scenario, I would that all of my Jabber for Windows clients to see all room based systems that are registered in VCS, when they try to get a system/user.

    I know that these directories are two distinct entities, does anyone know if it is possible to propergate the "all systems" TMS phonebook in CUCM somehow, or would it be a manual process?

    Thank you, if

    Hi Simon,.

    We are working on a solution like this.  If your room based systems were kinesiologist to CUCM, they show up in the directory for all your CUCM based systems.  I understand that there is a reason why you want to way keep your room systems on the RESUME for the time being.

    In the next version of TMS, we will see a new type of telephone directory of "CUCM", which are all systems configured in CUCM.  So your TMS direct managed or put into service endpoints will be able to see all systems no matter where they are registered.

    TMS systems are avaiable in directories CUCM is identified as a highly desirable item, but currently I don't have a timeline.

    Andrew - TME for TMS

  • SaveConference TMS booking API request fails with concurrentModificationException

    Hello

    I can't request a saveConference using the TMS v15 and Cisco TMS 14.6 booking API

    1. I do a backup Conference request without a session client because there is nothing first. I get an error 'ClientSessionErrorMessage_SessionBlank' and a session id is provided as planned.

    Request:

    http://www.w3.org/2003/05/soap-envelope' xmlns:env ='http://www.w3.org/2003/05/soap-envelope">http://tandberg.net/2004/02/tms/external/booking/" >15http://tandberg.net/2004/02/tms/external/booking/ ">722 .TMS meeting 4212015-04-25 13:00:00Z 2015-04-25 13:15:00Z 7 Win-lrb4bsm6uhe\apiuser-Domain1 API user Org = Domain1 [email protected] / * / one button to push 8B / 512 Kbps continuous Presence If Possible No. AutomaticBestEffort fake 18666543210 * 57101613 16TMS6B / 384 Kbps8B / 512 KbpsUSNotSaved0

    Answer:

    "http://www.w3.org/2003/05/soap-envelope" xmlns:env ="http://www.w3.org/2003/05/soap-envelope" container ="http://www.w3.org/2001/XMLSchema" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" >SOAP: SenderClientSessionErrorMessage_SessionBlankhttp://10.251.4.15/tms/external/booking/bookingservice.asmx <> xmlns = "http://tandberg.net/2004/02/tms/external/exception/" >-2147218247http://tandberg.net/2004/02/tms/external/exception/ "> falsehttp://tandberg.net/2004/02/tms/external/exception/" > 92e0bfd3-e2a8-4f66-bbbb-423d44adbdfb .

    2. I use this sessionid to make the same request to saveConference, but with this the client session id this time. I get an error "the booking changed before your update was introduced. Ensure that you have the latest version of the reservation and try again. "How to fix this?

    Request:

    http://www.w3.org/2003/05/soap-envelope' xmlns:env ='http://www.w3.org/2003/05/soap-envelope">http://tandberg.net/2004/02/tms/external/booking/" >1592e0bfd3-e2a8-4f66-bbbb-423d44adbdfbhttp://tandberg.net/2004/02/tms/external/booking/ ">722 .TMS meeting 4212015-04-25 13:00:00Z 2015-04-25 13:15:00Z 7 Win-lrb4bsm6uhe\apiuser-Domain1 API user Org = Domain1 [email protected] / * / one button to push 8B / 512 Kbps continuous Presence If Possible No. AutomaticBestEffort fake 18666543210 * 57101613 16TMS6B / 384 Kbps8B / 512 KbpsUSNotSaved0

    Answer:

    «http://www.w3.org/2003/05/soap-envelope"xmlns:env ="http://www.w3.org/2003/05/soap-envelope"container ="http://www.w3.org/2001/XMLSchema"xmlns: xsi ="http://www.w3.org/2001/XMLSchema-instance">SOAP: Senderthe amended booking before your update was presented.» Ensure that you have the latest version of the reservation and try again. http://10.251.4.15/TMS/external/booking/bookingservice.asmx " <> xmlns ="http://tandberg.net/2004/02/tms/external/exception/">-2147218248http://tandberg.net/2004/02/tms/external/exception/" > falsehttp://tandberg.net/2004/02/tms/external/exception/ "> 30fe0343-b04f-4a47-a94c-45d1a0d47c60 '.

    Try to use getConferenceById to retrieve the object of the Conference you want to change. I suspect that the revision id is set to 0 when you use getDefaultConference. See the description of the attribute 'version ':

    Revision number of conference together, incremented and returned by Cisco MSDS with each record. By default, 0 if not included by the client. If the client tries to update a version which is not the
    later in the database, Cisco TMS will throw an exception.

  • What is the best software of management of fonts for Windows 7?

    What is the best management software fonts for Windows 7 with automatic activation for CC?

    We ran 5 Fusion (suitcase) for years, but it's SO slow with Adobe CC (worked great with stand-alone software versions before CC versions), but it slows down the PC to a crawl now.

    Font management programs out there that work better with CC + have automatic activation?

    Please search for resolution here or you can post the application to the support of Extensis for Adobe Creative Cloud 2015 - manage ThisFont Management, Digital Asset Management and creation of information

    Compatible with Adobe CC 2015 font manager?

    Concerning

    Stéphane

  • Library of assets?

    Is there a way to manage the assets so as to allow for easy republication given updates to assets?

    The general idea that I'm trying to go for what. Imagine that a project has a lot of images in his slides. Imagine that some of these images may not be over yet, or are expected to evolve over time. Now imagine that instead of having each image to readd as it changes, it should simply publish the project, image links resolved and is imported into the most recent version of the file. Is there still such a magic wand? :-)

    J Kordani

    Hi J

    In a sense, this may be possible. Here's the deal. When you use Captivate to record a demo, each snapshot becomes the background for each slide image. But you can use something like TechSmith SnagIt to capture the screen captures manually. You can then insert each in its own slide.

    So if Captivate automatically, why would we go along the way?

    It is precisely for the reasons you have outlined. If you are unsure of the end result! So here's the deal. You can build your Captivate manually and save each screenshot in a specific folder. Later, when the screens become final or need an update, you would simply use the screenshot app to copy new version and save it to the folder using the same name of file as before. Then, inside Captivate, select all images (you can consider creating a specific folder in your library to keep them all together) and to update. You update a right-click on the selection, and then choose update from the context menu, by pressing the shortcut Ctrl + Alt + D or by clicking on the library toolbar icon.

    Because these have been inserted from a folder on your hard drive, update function reads this file and copy the images again, as a replacement for what existed.

    So although there is no 'magic wand', the function should work for you. Seems to work for me.

    See you soon... Rick

  • property options advice search

    I want to start using my Thunderbolt drive to store projects.

    I see in the options of assets can I choose to copy different data in the same place in the project.

    I should check everything?... where the assets will be get stored if I did nothing?

    see you soon

    geofffox

    When you create or save a project, you can choose whether the assets in your project are saved in the project or referenced from their location on your computer or a connected storage device. Assets include audio and video, sampler and samples for files EXS24 instruments or files Ultrabeat and Space Designer reverb impulse response.

    Saving projects without assets can save disk space, but as a result, the project cannot access the referenced files when moved, unless the assets are also moved.

    You can manage the assets of the project in the active pane of the Logic Pro project settings. You can use this pane to determine what types of specific assets to save in the project and to reference from their external location.

    The MIDI data from software instrument recordings, loops or MIDI files and settings for the bands of channels and plug-ins added are always saved as part of a project.

    Open the settings for the active project

    Choose file > project settings > assets (or use the command open active project settings key).

    • To copy the respective file types in the project: select the checkboxes of the copy.
    • To convert automatically the sampling frequency of all imported files (with a different sampling rate) to match the sampling frequency of project: check the option ' convert file audio samplerate on import.
    • If you deselect the "copy EXES samples in the project file" option, only instrument EXES files are copied into the project during recording, no examples related to EXS instrument files.
  • M277DW: Firmware update is not available...

    I tried to get the scans from the printer to go to my shared network drive (smb) (which is visible on the network)

    I had 3 tech this morning, on the HP chat system, to attempt to repair. 2 of them quit trying after 1 houre, they did not say a word they just closed the connection.

    Still, I wonder if the firmware I have is the most recent: my printer is on firmware # 20150126

    I tried to get you updated by wifi or ethernet, it just says could not connect to the service and to check your internet connection and try a gain. If my firmaware is a bit old and it tries to connect to protocile smb2 since apple (os 10.10) Yosemite as uses a new smb Protocol v3

    the printer configuration page

    Product name: HP Color LaserJet MFP M277dw number of trainer: ZK351Y5 serial number: VNB8H71JH0 cartridge Index: ID Service BMP GKBO: 25253 Firmware Datecode: 20150126 Version of the control panel: 0x15 disable Fax: no Version of Telecom: location 14/04/01: Canada ADF installed: Yes print quality Monochrome of Max: Max 600 x 8 color print quality: number of controller ImageREt 3600 : 12400 duplexer Version: Description of device 0: HP Color LaserJet MFP M277dw language: English default settings: self-managed number asset: Your Company Name: contact person: location of the device: geo location: product safety: Off Wired HW address: 30:8 d: 99:ae:f4:0 has Wireless HW address: 70:77:81:73:a0:63 network in use: Wireless host name: address IPv4 NPIAEF40A: 192.168.2.14 IPv6 address : FE80::7277:81FF:FE73:A063 total memory: 256 MB of memory available: 106,30 MBytes

    HP tech just called and talked consolidated firmware and he could say it was outdated. Sent me a file locally updated the firmware from a reason any, that he was not able to connect to the update service.

    And everything works now! I'm now a happy customer! = D

    BTW the last firmware is currently 20150716

    So with an older firmware needs updating to MAC system 10.10 + to be able to get the records of network works.

  • Integration of video telepresence, Cisco Jabber

    Hello

    How are you?

    I have a question, can Cisco Jabber video join a standalone VCS? or is it also a TMS? on his page it is said that a requirement is the MSDS, but if a customer has a VCS with TP EP registered him, he wants to allow video jabber as well on the network and wants to know if it can be done without the need to obtain an MSDS.

    can someone help me?

    Please

    Sincerely,

    Dante Verastegui

    For a demonstration of the concept starter pack a VCS may be feasible, but if you start with

    CTS systems, I would say it is a nogo

    You use CUCM for CTS systems, have the VCS - C for your internal network where

    JabberVideo and MX200 can register and then the VCS-E for external/b2b communication and

    Maybe external registration + TMS to manage.

    The requirement for growth of each message, I suggest you really join Cisco (partner). :-)

    Please note the messages using the stars below!

Maybe you are looking for