Must be able to access the network WPA PSK

Similar Questions

• Virtual machines are not able to access the network after you have moved the host

  We moved our 4 ESX host to a different physical switch and now our VMs cannot access the network.

  I can access the host via client vsphere.  Our host has 2 network cards.  They are both members of the vSwitch0.  I have 1 VM network defined, and they are both members of it.  The network adapters, vmnic0 and vmnic1 are also part of my VMkernel which I do not know that I need because I have 1 ESX Server and do not use iscsi or NFS.

  the two cards are also part of my service console.

  According to my host "configuration / display: vitual switch, it looks like all my virtual machines are defined to use the vswitch."

  the two physical network adapters is connected to the same switch.  I did not go to any configuration on the switch.

  

  The steers would be appreciated.

  Thank you

  Paul

  

  Welcome to the community,

  It sounds as if the physical switch ports are not configured correctly. Please check that port security is disabled on the switch (switchport mode access) ports and spanning tree portfast is (if any).

  André

• I am not able to access the network without wire in my laptop

  I use Hp Pavilion laptop 1008TU g4

  Window 7 64 bit and I am not able to use wireless and I use

  Broadcom 4313 802.11b/g/n adapter, please slove this problem

  353 wrote:

  I use Hp Pavilion laptop 1008TU g4

  Window 7 64 bit and I am not able to use wireless and I use

  Broadcom 4313 802.11b/g/n adapter, please slove this problem

• Windows XP sp3 can not access the network shares on vista after installing sp2

  I have a xp sp3 computer and another currently running vista Home premium sp2. Previously, I was able to access the network share on the xp computer before vista computer I installed sp1. Both computers were able to ping between them without problem.

  I've upgraded to sp2 because I had problems with windows media center, missing records. Upgrade of these issues fixed, but this means that roll back to sp1 is not an option for me to get operational network.

  Please do not post a standard answer on the network configuration. I am familiar with the standards requirements to share files between xp and vista and everything is set up correctly.  Like I said everything was working fine before the installation of sp2.

  If it is a known problem that is still not resolved, I'd appreciate knowing that information as well.

  Edit: Firewall been disabled during my troubleshooting

  After more work, I was able to solve my problem.  Update zone alarm solved my problem and helped my windows xp machine to access my Vista network shares.  As I pointed out in the original post, zone alarm firewall has been disabled during my troubleshooting.  Apparently, when disabled, the old version of zone alarm has always been the origin of the problem.

• to access the network of vision builder error

  to access the network error VBAI

  It used to work yesterday but idon't know why not today

  So, you have problems writing to a published network shared Variable? You might be able to solve this by using the software manager system OR distributed. By using this software, you should be able to see all the network published static Variables that are hosted on this computer and all other computers on the network. You can try to modify these variables using this software. If you have the same problems with the variables shared by using this software, then this probably means that there are problems with the network in general as a firewall blocking the communication.

  You can check if you have this by navigating to start > all programs > National Instruments > Distributed System Manager. If you do not already have it, you can download it here: http://www.ni.com/download/ni-distributed-system-manager-2013/4216/en/.

  This knowledge base article may contain useful advice on how you might approach this problem: http://digital.ni.com/public.nsf/allkb/6E37AC5435E44F9F862570D2005FEF25?OpenDocument

  Good luck

  Jeremy P.

• Cannot access the network drive or impossible to mount the network drive. Error "network path was not found.

  Original title: network path was not found

  HI, after the upgradation from windows xp sp2 to sp3 (next to the customer) I can't access the network drive or impossible to mount the network drive. ' ' It showa error "network path was not found.

  Hi gauravadavadkar,

  Thanks for posting your query in Microsoft Communities. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         Work on a domain?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with networkand check if the problem persists.

  S tep 2: if the problem does not persist in safe mode with networking, perform a clean bootto see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the steps to configure Windows to use a Normal startup state section of the article to start the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  In Windows network connection issues

  You can read this article for more information:

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250.

  Internet, not able to browse computers on the network

  The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)

  I'm puzzled.

  Hello

  I suggest you to send your request in the below link.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• I have a Vista operating system and be able to access the office of the United Kingdom's pension.

  I have a Vista operating system and be able to access the office of the United Kingdom's pension. I wonder if it's because I have vista I can't fill out the online application. Anyone have this problem? All the patches?

  original title: gov UK

  I just tried to download the interactive form of pension credit of http://www.direct.gov.uk/en/Pensionsandretirementplanning/PensionCredit/DG_10018692

  without any problem. You must have Adobe Reader.

  Using Vista, Internet Explorer 9, and Adobe Reader X.

• I have Adobe CS5.1 and must be able to open the Nikon NEF RAW files from my Nikon D4s... y at - there a downoad Adober website for this or how can I get the update to do?

  I have Adobe CS5.1 and must be able to open the Nikon NEF RAW files from my Nikon D4s... y at - there a downoad on the Adobe site for it or how can I get the update to do?

  Hi XDCAMAN,

  Photoshop requires at least version 8.4 of camera raw to be able to directly open these Nikon NEF D4S files which is available in Photoshop CS6 and above versions (not in CS5)

  Reference article: supported by Adobe Camera Raw devices

  You can upgrade to a higher version of Photoshop or download Adobe DNG converter to convert raw files to DNG and access these DNG files in Photoshop CS5.

  Kind regards

  Claes

• To access the network GoFlex drive

  Recently acquired 3 TB Seagate GoFlex mapped network drive (z :) that works beautifully with my other apps.  However, my Photoshop Elements 9 is not even found in the folder view.  In fact, it seems 'frozen' in configuration beyond (for example, has still a greyed on L: Drive to an old external drive is more fixed.).  Documentation, I found on statements from Adobe that I should be able to read a disc external network, even if I need to make sure that the catalog is on a local drive (which I do).  Any thoughts on how I might be able to access my network Z: drive?   TIA!

  It don't get started me in the right direction, but I still have the issue of the PSE does not "see" the shared drive (that is either UNC or drive letter).  Curiously, the resolution is a combination of the two.  I discovered that by making a folder import file display my drive letter of the network, and so I simply imported one of the files via this method.  Once this is done, my shared network folder then appeared in the list of folders under 'Network' as a list of the UNC, and then I was able to access the rest of the files and folders my usual way.

  Thanks for the help!

  Stephen

• Time machine is unable to perform a backup. Not able to access the sparsebundle. Problem occurred first on snow leopard OS. Followed Dragon upgrade to El Capitan. Only difference has error code of 109 changed to null. What about someone?

  Time machine is unable to perform a backup. Not able to access the sparsebundle. First of all, there is problem with the Snow Leopard operating system. Dragon followed in the upgrade to El Capitan. Only difference was error code 109 changed to 'null '. What about someone?

  We need some info.

  You can access from the finder Time Capsule? If this isn't the case, then Time Machine will not work.

  You upgrade the computer snow to El Capo and keep the same name?

  If you want to backup, it is best to start again... clean the new backup any attempt to add a previous backup failed.

  I recommend that you actually erase the TC... do a complete factory reset and start again.

  The previous backup if necessary can be archived on a USB drive connected to the TC assuming that Airport utility can still access it. Airport utility accesses the TC?

  With update installs all sorts of things can go wrong... so tell me more if you can not get anywhere.

• Able to access the folders but no shared drives on a Windows Server 2008 (C$, D$ etc.)

  I can access shared folders from a Windows Server 2008, but I am not able to access the shared drives (C$, D$). After entering my credentials, the system guard invites me for my credentials again and again. Any idea what can cause this?

  Appreciate the help

  Thanks.l

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums on TechNet. Please post your question in the Windows Server Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• I'm not able to access the help and support on my xp based computer.

  I have Windows XP Home Edition. I deleted some old programs using Add / Remove button in the control settings.  Also installed an antivirus program.  I noticed that the I help support button is unresponsive and I'm not able to access the system restore.  How can I solve this problem?

  Hello

  1. have you made changes on the computer recently?
  2. what happens when you run the system restore?

  Method 1.
  Let us first start the sfc scan and check if there are any file system corruption.
  a. to do this, click Start, click programs, accessories principally made, right click Guest and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 2.
  If the problem persists, then create a new user profile and then copy your current users assigning to this profile. For more information, see:
  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783

  How to copy data from a corrupted to a new profile in Windows XP user profile
  http://support.Microsoft.com/kb/811151

  How to recover damaged Windows XP user profile
  http://support.Microsoft.com/kb/555473

  I hope this helps.

• "Could access the network location:.."

  I get the "could access the network location:. «error with installing and uninstalling of programs, i.e. iTunes, Quicktime.»»
  I checked the Internet and found registry patches, but they have not worked for me. I tried the Fix It program in one of the solutions, not good.  I also stop my firewall and anti-virus and tried to install it that way. no go.

  I have Windows XP, SP3

  any suggestions?

  I thought about it... have an external hard drive which I usually turned off when the use not. I tried to install everything with it on and it worked.
  Thanks for your help

• Cannot access the network ERR_NETWORK_ACCESS_DENIED

  I have Windows 7.  Nothing works, I tried chrome (which will not even load) and Firefox (it has been a constant problem with gmail for well over a year).

  Cannot access the network

  ERR_NETWORK_ACCESS_DENIED
  Google Chrome has access to the network.

  Maybe it's because your firewall or antivirus software wrongly think that Google Chrome is an intruder on your computer and it blocks to connect to Internet.

  Chrome allow access to the network in your firewall or anti-virus settings.

  If it is already listed as a program allowed to access the network, try to remove from the list and Add again.

  I tried the above, but can't seem to solve the problem.  Thank you.

  Hello Paul,

  Thanks for posting your question on the Microsoft Community.

  I would like to know some information about the problem so that we can help you better.

  The same problem occurs when you use Internet explorer?

  Thank you for details on the question and your efforts to resolve.

  If the problem also occurs when you use Internet explorer, I suggest you use the steps in this article and check if it helps.
  Reference:
  Can't access some Web sites in Internet Explorer
  https://support.Microsoft.com/en-us/KB/967897

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Also see this article:
  Understanding Windows Firewall settings
  http://Windows.Microsoft.com/en-us/Windows/understanding-firewall-settings#1TC=Windows-7

  Note: Firewall and Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not turn off your antivirus software and firewalls. If you need to disable temporarily to install other software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software and firewall are disabled, your computer is vulnerable to attacks.

  To get help on Google chrome, I suggest you post your question on Google chrome forums.
  http://productforums.Google.com/d/Forum/chrome

  I hope this information helps.

  Please let us know if you need more help.

  Thank you