To access the IP or network Bluetooth Blackberry Android?

Similar Questions

• Try to install adobe reader & I continue to get this message... Error 1606. Could access the location %APPDATA%\ network what do I do?

  Try to install adobe reader & I continue to get this message... Error 1606. Could access the location %APPDATA%\ network what do I do?

  Check the registry values listed in the present statutes are suitable:

  http://support.Microsoft.com/kb/886549

  http://support.Microsoft.com/kb/2258121

  If this does not resolve the problem, create a new administrator account and use it to do the installation.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

• I'm trying to uninstall older versions of Java, I get error1606 cannot access the location %APPDATA%\ network I'm adminastrator how to uninstall?

  I'm trying to uninstall older versions of java, but keep Error 1606 could access the location %APPDATA%\ network I tried everything but not java support says go

  Hello

  I suggest that you run the Fixit in the following Microsoft article and check if it helps.

  You receive an "Error 1606" error message when you try to install or remove a program from Microsoft:

  http://support.Microsoft.com/kb/886549

  Note: If fixit is not enough, then try the steps outlined in Let me fxit muself.

  Hope the information is useful.

• error message 1606 could access the location %APPDATA%\ network

  Hello

  I tried to install office 2007 on my computer. I now have 2003 on my computer. When I try to install I get the error message

  error message 1606 could access the location %APPDATA%\ network

  I have window vista home basic edition. What should I do next. Thank you

  Please try this FixIt:

  http://support.Microsoft.com/kb/2258121

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Unable to access the Windows 7 network or via router or ad hoc homegroup

  I have a very annoying problem. I have 2 computers clean. They were formatted and Win 7 ultimate was installed on both computers. They have a PCI card (D - Link DWA-525) wireless. Their material is identical, the same motherboard, etc., next to "Server" is the pentium 4 and the 'customer' is celeron.

  We have 2 routers and modem 1. The first router, Airport Extreme, serve as a DHCP server and provides the wireless network. The second router (TimeCapsule), supposed to be the first router ethernet extends wireless (Act as a bridge). I can connect to the network and the internet works fine.

  The problem is with the local network.

  I can see the two computers on the network tab. I can ping by IP and name. I made a Homgroup on the computer 'server '. The 'customer' computer is joined I can see the libraries. Firewall computer both are disabled. All firewalls, routers and modem are disabled.

  A double click of the library on the homegroup does nothing. Attempts to access the shared by \SERVER folder or by the tab network gives a "path network not found" error.

  Basis, such as the file and sharing, settings etc, are on. Password sharing is disabled. Encryption is 40-50 (not 128, I don't remember the exact number). It's both for the work at home and Public networks.

  Because I could not access the network, I decided to make a special one. Same problems. Even with the static IP address (192.168.0.1 [Server] and 192.168.0.3 [customer], 255.255.255.0 subnet) and NetBios forced to activated.

  I just can't make it work. I have tried many info from here and other forums, but nothing is working. The worst part is that another PC will join the network, but I have not do it again just because I can't do these PC to work. A test, I put the other PC on the network (Win 7 Home), and the same problem applied.

  All computers can see them in the network, two ping tab ways with IP and name, but when trying to access the pc via network, it gives the network not found error path.

  Yes, I shared files.

  Homegroup troubleshooting and network that find anything wrong or just can not solve the problem.

  Help, please!

  Hello

  The question you posted would be better suited in the TechNet Forums. We have a separate team working on these issues. I would recommend posting your query in the TechNet Forums.

  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?filter=AllTypes&sort=lastpostdesc

  Hope this information is useful.

• How to get the type of network in Blackberry 10 Webworks 1.0

  Hello

  I am developing web applications and using connection plugin to get the type of network used.

  I've added the id of the required functionality in the file config.xml as follows:

  function id = "blackberry.connection".

  Now when you click on buuton, I call the function below:

  function currentConnectionType(){
      alert("1111111111");
      var connection = blackberry.connection;
      alert("222222"+blackberry.connection.CELL_3G);
  
      var connType = blackberry.connection.currentConnectionType();
  
      alert("Current con Type : "+connType);
  }
  

  In the code above curretCoonectionType is not called.

  Please help me correct where I am doing wrong. Or please let me know is there another way or sample code for the Type of network being used

  Thanks in advance

  It seems that the type property, you should get the current connection type:
  BlackBerry.Connection.type

  https://developer.BlackBerry.com/HTML5/APIs/gold/BlackBerry.connection.html#.type

  You can also save to connectionchange headphones to monitor changes in the type.

• To access the Forms 10g network public ip static via ACE

  Hello
  
  Greetings,
  
  I have not asked this question in the forum server application, but so far no response. Maybe someone here can help me or give a hint how to configure the application 10g R2 on static ip public server.
  
  We have 3 network card in the new server. OS windows 2003R2.
  
  1 LAN network for a local connection
  2 STATIC IP for access to the public
  3 loop back adapter current.
  
  I searched for any document on this subject but without success. I followed the oracle application server installation guide 10g Release 2 (10.1.2) successfully, but it's only in intranet, because I installed in network adapter 2 but now different situation that the new server that is has 3 network adapter.
  
  I don't know how to set up in the public static ip address...
  
  Now, I want to install AS for the Internet. But I do not know what exactly the steps and I don't want to install without proper procedure.
  
  Have I used the static ip address instead of the local dchp? I have to join to the domain? What I'll put in the/windows/system32/drivers/others/host?
  
  Please can someone help me?
  
  Thank you
  
  Charles.

  Charles wrote:
  I'm very sorry, I don't know many networking as im only low level form developer.

  Do not be sorry, we all once started as a low level developers with little knowledge ;)

  And we do not have network admin who can help me now

  Is it not the one who is responsible for the IT infrastructure? Don't get me wrong, there is really no offence meant everything leaving the correct configuration of a server exposed to the internet up to a developer? I mean we are trained to write correct code, not for servers or the tires of the company car, right? Do facilities to test for the OK intranet systems, but correctly configure a host exposed to the internet? As it's windows you barricade better it as well as possible, because it is most certainly a main entrance for attacks. Once your host is compromised, there is nothing that can stop intruders possible enter in the LAN, and data across the enterprise are at stake. I do not want to forget the situation of insecurity, but if something happens and it gets out that you had an attack via the server you set up I don't want to be you...

  In any case, just a few tips as how and why would exceed this thread:
  For the Server Application (software, not the entire configuration), there is no difference if the host on which it will run is connected to a network with 5, 5000 or 50000000 hosts; If you want to see it as simple as possible, he says just the http requests. The application server software does not care how this request happened to her. So for the installation of IAS itself, it does not matter, just install it as an application server for the intranet.

  First get rid of the loopback adapter ruined; It is only used if your machine does not have network access at all. So, you have 2 NICs on the left, and I'm assuming that one is the local network, and the other is the internet connection?
  If anything is "between" your server and the great cloud of the internet, you can easily try if you are public available once the internet connection is established: just type

  ipconfig
  

  and take a look at the IP address of your internet adapter. Now launch your browser, type

  http:///forms/frmservlet
  

  You should see the test request forms. If you already have a domain name registered to your public IP address, you can even use this domain instead of the IP address. If you don't have a domain name, you can register a domain free http://www.dyndns.com/, put in place the customer on your host and you are available under this IP address. This would also work if you have a dynamic IP like dyndns client sends the IP to the service periodically so that the domain name is updated if IP address changes (I use dyndns to my private Web server connected to the internet via a connection to the internet dial-up for years, works like a charm). But I wouldn't use it as a production environment.

  The config set well enough depends on your infrastructure; If you have a router or a firewall, you must configure these things too (port forewarding etc.), surely there's therefore no step by step guide that applies to everyone. Just my personal opinion, but it will be a pretty cold day in hell before I expose a windows server to the internet as a "first line of attack", and I hope that you're not supposed to do. As your LAN certainly is connected through a router to the internet your server can be also accessible through this router. If this is the case, you need to configure your router for queries foreword to the port that your IAS is running on your host (just look for portforewarding ). But if you ask me there's another damn cold day in hell before I let the developers about this router if it were my company (didn't access the router config in my company also and rightly so).

  see you soon

• How to access the list of contacts in BlackBerry

  I want to make a native application that needs to access the contacts list.how I can do

  contactList = () .openPIMList () PIM.getInstance (BlackBerryContactList)
  PIM. CONTACT_LIST, PIM. READ_WRITE);

  Above code will give you the entire list of contacts.

• Unable to access the email acount and text BlackBerry Smartphones

  Hello

  I use Black Berry 9380 curve.

  For the last week I am unable to open my email on my phone accounts.

  I can receive emails but not read and send mails via my phone.

  The error message that is invited each time is:

  "Eception exception:

  java.lang.ArrayIndexOutofBoundsException.

  Please give me solution on this...

  Hello!

  Try the following:

  Remove the battery in the operating status of your BlackBerry device.

  After loading is completed, then do what is necessary.

  I hope that solves your problem!

  If your problem has been resolved then would you be asked to click 'Like' and accept as a 'Solution' that other advisors invest it times on this Message more.

  Thank you.

• Cannot access the NSLU2 on network - HELP!

  Hello, recently hooked the NSLU2 again after a few years of storage. It fine to the connected router (WRT54GS running tomato 1.25), but for the life of me I can't get to be recognized by the network.  192.168.1.77 ping fails, I have reset the default router without success.

  The Ethernet on the NSLU2 light is on and sometimes flashes.  The light of the port on the router is on. It just will not be displayed in the list of devices in the tomato.

  Running Windows 7 Pro 64 bit.

  Any help would be GREATLY appreciated.  Thank you!

  -Paul

  Hi, use a port scanner to find out that the HTTP port on the slug has been yet defined a former high port number, could access and reset once I got it. I thought that the hardware reset would put this back to 80!

  Thanks for your help

• Difficulty accessing the virtual private network (VPN) to run on VMware Fusion

  I use Mac OS X 10.5.6 with VMware Fusion 2.0.1.  I am running Windows XP Professional 2002 with service pack 3 and the 5.0.01.0600 Cisco VPN client.  I couldn't connect to my home institution, even if the Mac has no problem making this connection on the same server using a client provided Cisco VPN.

  I tried bridged and NAT connections.   For packed I put the XP network settings to DHCP and of course, he is able to get on the internet.  It detects the VPN server, but the client does not let me enter a password.  Only a single character is accepted.  For the NAT settings, I used normal settings for the XP operating system I internal thought Windows communication would be tunnel by the VPN connection on my Mac.  But I can say that it does not work.

  I prefer to use the NAT connection if possible as this seems the right way to do it and should be more simple.  Any thoughts?

  Jan

  I think that there is a good chance of your router only supports 2 connections to the same VPN at the same time, and that's why you can't have the Mac and the VM connected at the same time.  According to your needs I think you only need one or the other connected at a given time.  When the Mac is connected you can access VPN network resources by placing the virtual machine mode NAT network.  When the Mac is not connected, then run the VM in bridged mode and VPN with only the virtual machine.

  I run 2 Windows XP Pro SP3 machines virtual enough daily, each connected to a different VPN.  My Mac is not connected to a virtual private network (and does not need to).  This configuration allows to my Mac to access local network resources and the virtual machines to do everything that is required through the VPN.  I am running customer Cisco 4.6.x on a virtual machine and a client owner on the other.

• XP 64 bit VERY slow to access the directories and network drives

  We have some Dell Precision workstations of the very high-end with 24 GB of RAM and 4 CPUs to four hearts.  When users use workstation on a network drive, it may take up to a minute before the directories appear.  The flashlight may appear.  This latency is frustrating.

  However, in Windows Explorer, it's almost instantaneous.

  Users prefer to use the workstation.

  Any suggestions?  Thank you.

  27/01/2011 14:33 Roger Denver wrote:

  We have some Dell Precision workstations of the very high-end with 24 GB of
  RAM and 4 CPUs to four hearts.  When users use on a workstation
  network drive, it may take up to a minute before the Show directories
  SPH flashlight may appear.  This latency is frustrating.

  However, in Windows Explorer, it's almost instantaneous.

  Users prefer to use my Computer.Any suggestions?  Thank you.

  Select and delete the key {D6277990-4C6A-11CF-8D87-00AA0060F5BF} to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\RemoteComputer\NameSpace

  Usual warnings and precautions apply when you change the registry...

  John

• Error 1606. Could access the location %APPDATA%\ network

  I typed the error code in the search line and I went to support.microsoft.com/kb/886549, print resolution, and followed them. When I tried to delete the value name as he said instructions, but I get a different error message "Unable to delete all specified values." Is there another way I can remove the value? If this is not the case, what are other options that are available? I can also download all the pdf files or access Office home and Student 2007. I get the same error message.

  EMachines ET1161
  Windows Vista Edition Pre family

  Hello kfranklin,.

  Thanks for posting your question on the Microsoft answers Forum.

  Right click on the values that you can not remove and click on "Permissions".

  Make sure your user group (or you) have full control. It could be a Director or
  another account that has administrator privileges.

  Then try again and see if you can remove the values.

  If this does not help, then give a more detailed description of what you're trying to delete and why.
  This will give us a better understanding of what you are trying to accomplish and how we can help you better.

  We look forward to your response.

  Thank you.

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't access the internet applications on my blackberry blackBerry smart phones

  Hello

  I have a blackberry curve 8520 then 5 when I try to use facebook twitter or blackberry world app on my wifi it doesnot and it give me a message that I'm not connected to a WiFi network

  ,,,,,,,,,,,,,,,,,,,,,,,,,

  Fix. In order to use them, even via wifi, you will need an active blackberry data plan from your provider.

  http://www.BlackBerryFAQ.com/index.php/What_do_I_need_a_Data_Plan_for%3F

• I get a message saying could access the location %APPDATA%\ network when I try to uninstall itunes

  I tried to restart my computer to see if it would reset and I also did a system restore... nothing works

  Hi amyanderson,

  Method 1

  I suggest that you try to uninstall QuickTime first and then try to uninstall iTunes, check that it works.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 2

  If the previous step fails, then see the items below and try the steps to uninstall iTunes from the computer and check if it helps.

  Remove and reinstall iTunes, QuickTime, and other software components for Windows XP

  http://support.Apple.com/kb/HT1925

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

   

  Method 3

  If the previous step fails then reinstall iTunes on the computer and try to uninstall it.

  http://www.Apple.com/iTunes/download/