To access the Oracle articles

Similar Questions

• who are the IP accessing the oracle on the oracle database user

  Hello
  
  How to check which are the intellectual property have access to the user on the oracle database oracle

  Brother very simple, just enable auditing and get a good, easy and authenticated the information you are looking for. The audit has been filed for this type of questions.

  Concerning
  Girish Sharma

• To access the Oracle PLL (library) of Java forms

  Hello

  We must Access a library PLL (Oracle Forms) from Java code and make a request to use it. I searched the net but could not find any evidence that this can be done.

  Is it possible, is it of any source you can advice?

  I really appreciate all the comments.

  Thank you

  Emre

  Direct access to procedures pll of the tools other than forms is not possible, no. If it is possible, you can convert your pll procedure in a stored procedure and call it in your pll and in java.

  see you soon

• To access the Oracle Postgres using DG4ODBC and very slow psqlodbc

  I've set up DG4ODBC a base of Oracle 11 g Windows 2003 32-bit to access a Windows 2008 64 bit 9.1 database Postgres, you use the psqlodbc (32-bit) driver.
  
  I can't do it because of the queries, but they are very slow. The reason is that the place where clause of the query is deleted somewhere along the line (I've seen actual queries run by Postgres using pgAdmin server status screen) and all the rows of the table are extracted from Postgres. Naturally with tables bigger than the few lines which means do a full table in Postgres scan, so that transfer a lot of bytes through the network.
  
  "For example, if I mark from Oracle like this: select * of" dps_user"@pg where 'id' = '2423', run the sql in Postgres is: select * from dps_user, which retrieves all the rows of the table! When I get the result of the query in Oracle, I get only the row with id 2423, so I guess that Oracle Gets the entire table and that he not filtering at its end.
  
  In a separate 32-bit Windows XP machine I have implemented the same psqlodbc driver, and ran the same query by using Microsoft Query. In this case, the query to run in Postgres contains a where clause and, therefore, it is much faster because a unique index scan is performed in Postgres, and that a line is transferred to Microsoft Query.
  
  Could you help me, please?
  
  Thank you very much
  
  Carlos

  Hi Carlos,
  Yes - he manipulated me the SR ;-)
  Sometimes they have a little more time and information to study can throw up the answer.

  Kind regards
  Mike

• Cannot access the tables in other patterns of database Oracle

  Hello. We got our Oracle database administrator to install APEX in our Oracle database. She created a login and a schematic for my Oracle database user so that I can work with APEX a bit. Here is the information about the version of the SUMMIT we installed:
  
  Information about the Version of database
  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
  PL/SQL Release 11.2.0.2.0 - Production
  CORE Production 11.2.0.2.0
  AMT for IBM/AIX RISC System/6000: Version 11.2.0.2.0 - Production
  NLSRTL Version 11.2.0.2.0 - Production
  
  I found that my user can access the Oracle tables within my own diagram of Oracle database. Most of our main tables are in 3 other schemas and I need access to all the tables of all these schemes. Now, whenever I meet a drop-down list of values for the schema, by own schema is available in the list of values.
  
  Is there something that our Admin can do to make these tables in other patterns available on my user account?

  Sharpe,

  This documentation should point you in the right direction. It will show you how to add multiple schemas to a workspace.

  http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21678/adm_mg_wrkspc.htm#CHDBDCCJ

  See you soon,.
  Janet Tyson

• capture the data of Internet users access to oracle application server

  How to capture the details (for example, user, date & time of session id, ip address, etc) of all users (in home, vpn access, etc.) to access the oracle application server.

  Hello

  If you use $ORACLE_HOME/webcache/newspapers you can view access logs because all traffic passes through...

  concerning

• Access to Oracle Press VirtualBox virtual host

  Hello

  I have a windows host system 8, install the Virtual Box last edition.

  The guest operating system is Linux oracle that came with the selection of pre-designed developer programs Oracle's VM.

  The virtual machine is set to HOST ONLY the network settings.

  Now, the thing is I want to access the Oracle in the guest from my windows host computer.

  the guest operating system indicates the IP 192.168.56.101. I can ping the IP address of the HOST machine, but cannot connect to the

  Developer SQL to oracle in the guest to the host OS. He goes on to say that impossible to connect the network card.

  Please I need help, now please do not say that to install the oracle in the window itself. In fact, I want to do the same on my macbook pro since it is my main machine.

  Hello guys,.

  Thanks for the responses you provided really appreciate it.

  I made this connection and access between the host and the guest, and to access the oracle on the guest database.

  System information:

  • MacBook Pro - OS X 10.8.4
  • RAM 4 GB [go to 8 GB]
  • Package VM: Oracle Virtual Box
  • Guest VM: Oracle VM [ http://goo.gl/dtbzO ] developer pre-designed program selection
  • Network connection: host only

  Steps to connect the host to host

  1. If you see the "ifconfig", you will see a network card named 'vboxnet0' [created after the installation of VB]
  2. Check the address allocated to the virtual machine [MAC]-> preferences-> network: copy the beginning or between address, which in my case has been 192.168.56.101 [start a]
  3. Assign the address to the vboxnet0 adepter by terminal: sudo ifconfig vboxnet0 alias 192.168.56.101 to the top
  4. Change the virtual machine network affecting "Host," only
  5. Select the vboxnet0 virtual adapter in the adapter list, apply the configurations, click ok
  6. Start the guest operating system and login
  7. Check the IP configuration it by ifconfig, you will find the map eth0 with the same IP address that you assigned to the vboxnet0 on the host machine.
  8. Sql Developer on the host machine fire
  9. Make a new connection and "Hostname" as even as the vboxnet0 IE. 192.168.56.101, fill in the other details of the connection details Oracle needed comments
  10. Test the connection
  11. Woollaaaa you are finished

• to access the schema in sqlplus in APEX

  I want to access the Oracle Forms Developer (manufactured by APEX) scheme, but I don't know what password I should give him in oracle forms developer, or even environmental sqlplus.
  
  Thank you and best regards
  Abbas

  Hello

  You can reset this password schema.
  You can connect to the workspace when the schema is assigned and run SQL workshop.

  ALTER USER your_schema IDENTIFIED BY your_pass
  

  Kind regards
  Jari

• How to access the NEXTVAL CURRVAL on columns of IDENTITY Oracle 12 c?

  With the help of Oracle 12 c I defined an identity column:

  create table test (col1 number generated default as identity (start with 1 by 1 increment), col2 varchar2 (100));

  Oracle then automatically generates a sequence for my identity column.

  Is there a way (/ the call of the function/etc..) to access the CURRVAL / NEXTVAL for this given sequence I don't have the name of sequence? (without having to query the system catalog).

  I try to avoid the manual creation of a sequence for each of the tables that need the auto-numbering and let Oracle manage automatically creating the sequence, but I need to join the just inserted number in my identity column when inserting in the line, essentially the CURRVAL. Looking forward to use IDENTITY columns...

  Thank you!

  user537222 wrote:

  With the help of Oracle 12 c I defined an identity column:

  create table test (col1 number generated default as identity (start with 1 by 1 increment), col2 varchar2 (100));

  Oracle then automatically generates a sequence for my identity column.

  Is there a way (/ the call of the function/etc..) to access the CURRVAL / NEXTVAL for this given sequence I don't have the name of sequence? (without having to query the system catalog).

  I try to avoid the manual creation of a sequence for each of the tables that need the auto-numbering and let Oracle manage automatically creating the sequence, but I need to join the just inserted number in my identity column when inserting in the line, essentially the CURRVAL. Looking forward to use IDENTITY columns...

  Thank you!

  You can do this in the way you would normally do: using PL/SQL and the RETURNING clause. Here is an article from the Oracle base that shows the use of a RETURNING clause. Just ignore the part that explicitly inserts the value of the sequence given that the IDENTITY column that will do it for you.j

  http://www.Oracle-base.com/articles/Misc/DML-returning-into-clause.php

  >

  SET SERVEROUTPUT ON

  DECLARE

  T1.ID%type l_id;

  BEGIN

  INSERT INTO t1 VALUES (t1_seq.nextval, 'FOUR')

  RETURN the id INTO l_id;

  COMMIT;

  Dbms_output.put_line ('ID =' | l_id);

  END;

  /

  ID = 4

  PL/SQL procedure successfully completed.

  >

• Error message after trying and do not access the Article, press release or Social Bookmarking sites from the newly installed software.

  The message below appears, after having tried and do not access the Article, release press, or Social Bookmarking sites; Since the software newly installed.

  ((Accès àle chemin c:\Program Files (x86) Dotcom Marketing / Auto System X references xml traffic is denied.))

  Does anyone know how to overcome this problem.

  Original title: Error Message

  "since the newly installed software? What software? Have you checked the manufacturer's website to see if they have a solution?

• Do not have access to the oracle community ideas

  Hello

  Why don't I have access to the Oracle community ideas

  

  

  Ideas have been disabled by the administrator due to issues around spamming.  They hope it is resolved quickly so that the ideas can be relit.

• Not able to access the constant value of package in oracle reports

  Hello

  I created the package with the constant variables in the database

  CREATE or REPLACE PACKAGE cls_vars AS

  -Constants

  const_yes CONSTANT VARCHAR2 (1): = 'Y ';

  const_no CONSTANT VARCHAR2 (1): = 'n';

  const_active CONSTANT VARCHAR2 (1): = 'A ';

  const_inactive CONSTANT VARCHAR2 (1): = 'I ';

  end;

  I created the function of oracle reports, please see the code below

  function CF_CONSTINACTIVEFormula returns the Char type is

  L_const_inactive VARCHAR2 (10);

  Start

  RETURN cls_vars .const_inactive;

  EXCEPTION

  WHILE OTHERS THEN

  RETURNS A NULL VALUE.

  end;

  When I compile this code in the oracle reports, I get this error "cannot directly access remote variable or cursor.

  We can not directly get/set a variable (or constant) in a package to database forms and reports module.

  We must use the procedures/functions to get/set accessor. For example:

  CREATE or REPLACE PACKAGE cls_vars AS

  -Constants

  const_yes CONSTANT VARCHAR2 (1): = 'Y ';

  const_no CONSTANT VARCHAR2 (1): = 'n';

  const_active CONSTANT VARCHAR2 (1): = 'A ';

  const_inactive CONSTANT VARCHAR2 (1): = 'I ';

  FUNCTION get_const_yes RETURN VARCHAR2;

  ...

  END;

  /

  CREATE or REPLACE PACKAGE BODY cls_vars AS

  FUNCTION get_const_yes RETURN VARCHAR2 IS

  BEGIN

  RETURN const_yes;

  END;

  ...

  END;

  /

  Kind regards

  Zlatko

• Oracle Database Vault ORA-12578 connection error: open TNS:wallet failed (user OS to access the wallet)

  Hi all

  I create a portfolio of oracle and everything works fine until a script is launched by the OS oracle user. (same user that whoever created the store)

  I use authentication external store and inside my script, I do something like a sqlplus / @MYSECURE_TNS.

  However, when I run a script OS another user as a 'data_loading_user' I get the error: Oracle Database Vault ORA-12578 connection error: TNS:wallet open failed

  I would like to know, how I can activate any user on the local host access the portfolio safe to connect to the database.

  Here my current ENV:

  ==================

  Oracle Linux 6.5

  Oracle a Standard 11.2.0.4

  Webtier Oracle 11g

  Database and thin client SQLNET. ORA

  =============================

  SQLNET. WALLET_OVERRIDE = TRUE

  SSL_CLIENT_AUTHENTICATION = FALSE

  SSL_VERSION = 0

  WALLET_LOCATION =

  (SOURCE =

  (METHOD = FILE)

  (METHOD_DATA =

  (DIRECTORY = / u01/app/oracle/owm/wallets)

  )

  )

  Thanks in advance for any help.

  JS

  Hi all

  Tried something out of the blue, that has worked.

  I added the data_loading_user of the user to the group administrator (Group of BONES that created the wallet).

  The I added the read permission to the group, so the permission on the files below were 640:

  # > chmod 640 cwallet.sso

  # > 640ewallet.p12 chmod

  Thank you

  JS

• Cannot access SQL more from other than the Oracle users

  Hello

  I installed Oracle 11 g R2 on Red Hat 6. My problem is that I can't access sqlplus from other than the oracle users.

  I put the PATH, the ORACLE_HOME and ORACLE_SID to the correct values.

  Session1

  Connect as: oracle

  [email protected] password:

  Last login: Sun Aug 24 01:24:46 192.168.202.1 2014

  [oracle@localhost ~] $ echo $PATH

  /usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/Home/Oracle/bin:/Home/Oracle/app/Oracle/product/11.2.0/dbhome_1/bin

  [oracle@localhost ~] $ echo $ORACLE_HOME

  /Home/Oracle/app/Oracle/product/11.2.0/dbhome_1

  [oracle@localhost ~] $ echo $ORACLE_SID

  ORCL

  [oracle@localhost ~] $ sqlplus

  SQL * more: Production release 11.2.0.1.0 Sun Aug 24 03:17:32 2014

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Enter the user name:

  Session2

  Connect as: nada

  [email protected] password:

  Last login: Sun Aug 24 02:31:49 192.168.202.1 2014

  [prithwish@localhost ~] $ export PATH=$PATH:/home/oracle/app/oracle/product/11.2.0/dbhome_1/bin

  [prithwish@localhost ~] $ export ORACLE_HOME=/home/oracle/app/oracle/product/11.2.0/dbhome_1

  [prithwish@localhost ~] $ export ORACLE_SID = orcl

  [prithwish@localhost ~] $ echo $ORACLE_HOME

  /Home/Oracle/app/Oracle/product/11.2.0/dbhome_1

  [prithwish@localhost ~] $ echo $ORACLE_SID

  ORCL

  [prithwish@localhost ~] $ echo $PATH

  /usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/Home/Prithwish/bin:/Home/Oracle/app/Oracle/product/11.2.0/dbhome_1/bin

  [prithwish@localhost ~] $ sqlplus

  -bash: sqlplus: command not found

  I guess that I could not access sqlplus as the Nada the user has no access to X11R6

  [prithwish@localhost ~] $ cd...

  [Host prithwish@localhost] $ ls - ltr

  Total 8

  drwx-. 30 oracle oinstall 4096 23 August 23:51 oracle

  drwx-. Nada Nada 4096 24 August to 02:33 27 Mathieu

  [Host prithwish@localhost] $

  My question is, although quite stupid, that double

  (1) I have to change the permissions of the directory oracle of 755 for any other user to access the sqlplus?

  (2) why is the user directory under the folder created with permissions of 700, even when the umask is set to 002? Change the permissions of the directory under/Home oracle will cause security problems?

  My apologies for being naïve. It's the first time I installed Oracle under UNIX

  Kind regards

  Prithwsh

  Actually, the default procedure is NOT to install oracle to X11R6, but in/opt/oracle. or maybe/usr/local/oracle.

  This is what you're going to be recommended in the installation documentation, and in doing so, don't forget to run rootpre.sh and root.sh, I never had security problems and could run Oracle from any account.

  Sybrand Bakker

  Senior Oracle DBA

• How to create a generic method to programmatically access the DB sequence in oracle adf

  Hello

  I am trying to create a generic method to access a programmaticall DB Sequence in oracle adf. My version of JDeveloper is 11.1.2.4.

  I created a method getSequenceNumber (String seq) and saved in my application module. Also added to the links of my page.

  I followed the instructions below link for this.

  ADF Code corner: Oracle OTN JDeveloper harvest xx / 2010

  Note: The problem with this approach is that I have to create separate methods to access the different sequence numbers.

  In my managed bean, I wrote the code below to get the method name.

  OperationBinding getNextSequence = ADFUtils.findOperation ("getSequenceNumber");

  How can I pass my sequence DB name to this method?

  Thank you

  Hello

  getNextSequence.getParameterMap.put ("seq", "yuorseqname");

  getNextSequence.execute ();