Too slow Pixelbender and sliders don't work

Similar Questions

• Photoshop too slow 127x300cm and 100 dpi

  I want to change the wallpapers of size 127x300cm and 252x300cm and 300 dpi, 300cm, (cmyk). I can't work able to 150dpi. Photoshop is too slow 127x300cm and 50dpi. What should I do to change the image smoothly at 200-300 dpi. My system is dell xps l510x

  Please guide me. any setting or system upgrade?

  In the hope of a quick-response solution

  Hello

  Cheap solution...
  I bought the HP Pavilion Notebook 15-e048nr with 12 GB of ram and SSD 256 GB samsung 6 GB/s.

  It works pretty well to 150dpi (252x300cm). Above 150dpi... it slows...

  Cost me about $700.

  Thank you

• Sound fluctuate constantly, jumps and mute don't work

  original title: noise fluctuates constantly and mute does not work, there is also a quick jump in time.  ???

  Sound fluctuates constantly and the mute won't work, there is also a quick jump sometimes... it is his property. ???

    

  Hello

  1. What is the brand and model of the computer?

  2. when exactly this question produce?

  3. don't you make changes to the computer until the problem occurred?

  4. what operating system is installed on the computer?

  I suggest you try the steps from the link below and check if it helps.

  For Windows 7: Open the Audio playback problems troubleshooting: http://windows.microsoft.com/en-US/windows7/Open-the-Playing-Audio-troubleshooter

  For Windows Vista: Tips for solving common audio problems: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-sound-problems

  For Windows XP: How to troubleshoot sound problems in Windows XP: http://support.microsoft.com/kb/307918/en-gb

  Hope this information is useful.

• Flash and Silverlight don't work at all in beta 34.0, when Internet Explorer is working correctly with these; immediately arrived with Update Beta 34.0.

  Hello!

  Immediately after the Update Beta 34.0, Silverlight and Flash, completely stopped working in Firefox. I am running Vista Home Premium, Service Pack 2.

  They work fine in Internet Explorer.

  This happens in any website I want.

  For example, I can go on Youtube and the page will display a black box where the video should be, but there is no control of playback, or any way to activate the video. Clicking in the black box has no effect.

  On the site of game music, Grooveshark, the site does not recognize Flash installed at all. (If you have not installed Flash, this site displays a message each time. Grooveshark correctly recognizes that Flash has been installed by Internet Explorer.)

  I've updated the Flash plugin for the current version, which also has nothing.

  I have not reinstalled Firefox, or do a system restore, still.

  I just bought a new computer I was going to migrate to and withdraw from this computer, so I wasn't going to make heroic efforts to solve this problem. I reported this more on the order of a bug report.

  Thank you.

  Karl

  Karl,

  Do you by chance have Flashblock installed? I had checked before and did turn off but it seems was not enough. Update b 34, 1 break Flashblock who, in turn, breaks Flash and, for me, VLC. I had to disable (in Add-ons) and restart Firefox, and now everything is fine.

  I found this while digging for answers on the Mozilla forums and eventually find http://forums.mozillazine.org/viewtopic.php?f=23 & t = 2881007
  on Mozillazine.

• Paused long and sleep don't work on Windows 7 Home Premium

  A few weeks ago the Hibernate and sleep functions stopped working on my SONY VAIO laptop.  By that I mean, I can click on functions and it seems to work fine, BUT a minute later he wakes up.  I disabled hibernates and then helped him, but this does not solve the problem.  Then one week there is exactly the same thing started to happen on my Lenovo desktop all-in-one computer.

  I never had this problem on any of my computer before, is more strange would happen on two computers in a few weeks apart.  It makes me think that a recent Windows Update may have caused the problem.

  Yet once, put in hibernation until sleep only works for a minute, and then he wakes up again.  I am convinced that it is NOT caused by a former pilot or a device that wakes the computer since we are talking about two distinct and unique computers that do not share anything other than a printer.

  Thoughts or ideas to solve this problem is greatly appreciated. Thank you.

  Hello Brad,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. have you made changes to your computer hardware?
  2. What is the model number of your laptop?

  I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run Troubleshooter of power and control.
  Reference:
  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft Knowledge base article and check the issue.
  Reference:
  Windows 7 is not going to sleep
  http://support.Microsoft.com/kb/976877

  Method 3:

  You can also create a new power plan and check.
  See this link:
  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme
   
  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• You say don't not to use Java, but when I remove it, I just can't see vedios and things don't work properly. So, if I cancel Java I use.i

  Explain to us whether to use Java. ? If she isent safe for our games and coupons and videos that which must be loaded on the computer to make these things work. ? Damed if we do and damed if we do not have. People who are not computer and get older, how do you know how. We need 1 2 3 4 steps. After I update you, I started getting pop ups, especially since a Web Guard, I tried to take off and fought with him for 1 1/2. My computer wouldn't work. I have Avast security and when these security companies we safe. And these cleaner companies, other things, try to take over the computer. If you pay or you pay not it's the same, everyone wants to take control of your computer. I don't have a TV, my computer is important to me. And then the computer when I try to enter read something special on an e-mail, it begins to roll said empty in the box and just keeps circling. Unfortunate I need free things to download to help me and then the things I try something underhanded coming on the tail and destroy my computer. Not in the position to hire Nerds to fix.

  The Java security problems is Java Deployment Toolkit.
  Not all Java programs.

  Java downloads for all operating systems

• Tecra A10 - keyboard and Touchpad don't work anymore time in Windows XP

  Hello

  My TECRA A10 is a very strange problem since 1 month.
  At the start, in windows XP, keyboard, touchpad or both frequently work. Only the 'Fn' keys are operationnals.
  I can't use the other. 'CAPS LOCK', alpha keys, etc. are not active. Laptop is not usable.
  I have to restart the laptop in a loop while alpha keybord is not usable. The drivers are updated.

  I think it's a problem with Windows.
  When the laptop starts up, I can choose a support starting with the arrow keys and then see "CAPS LOCK" key is OK (led switch works).
  Everything looks ok. After choice hard disk media and startup XP, keyboard is released.
  No BIOS problem.

  I reinstalled Windows XP Pro SP3 with the Toshiba CD.
  At first, I had no problem with the keyboard or the touchpad. I restarted the laptop and everything was beautiful.
  I applied the update to Windows and keyboard/touchpad problems were back.

  Perhaps, there is a driver of conflict with an update of Windows?

  Patrice

  > I applied the update to Windows and keyboard/touchpad problems were back.
  If I understand your message, the touchpad and keyboard problems started after running the first MS Windows XP updates.
  But after the Win XP installation (without the MS updates) everything has worked perfectly you have no problem with the laptop too using the operating system from the recovery Toshiba (Vista for example) disk.

  Is this good?

  Hmm that's strange because the keyboard driver is part of the windows and there is no special keyboard drivers that could be updated.
  But there is a touchpad on the European driver Toshiba page; Alps Electric.

  Update the driver of the touchpad and also check if your BIOS is up to date. If the BIOS is not to day then updated it also.

  Check it out!

• When you call sub-panels in an exe file, some to run correctly and some don't work at all.

  Hello

  I use LabVIEW 2009 and display various screws in a secondary (one at a time) into an executable.  A few screws properly load and run, while others do not work.  All the screws called VI properties are the same.  When I run into the development system, the code runs successfully.  I don't get any errors during the call to the screw - screw display all their facades like they should, but only a few actually deliver, while others do nothing.  Any ideas would be very appreciated!

  Thank you

  Jason

  Are you running VI separately, or you use the method run a VI?

  If you use the method run a VI, check out error and see if you get an error.

  If you are running separately, make sure that this area of the code actually runs (from your description, it looks that BT is).

  If all screws are supposed to be in the app, I would say that, given the static references for them and having a node property to one of the controls in each VI you want to display in the secondary, which will ensure the that LV will not remove its FP when you build the exe. Looks like this is your case, since you say that you see the FPS.

  If the screws are not in the application (that is, you run live recorded separately), you will need to ensure that they have all the dependencies that they need, because it is possible that they you are missing the vi.lib screws or your own screws not built in the app (since there was no static reference to them). The easiest thing is to build a distribution for each other while giving it a name space. You can do this by using the OpenG constructor, although I've never needed to. The main problem with this is that it will explode the size of the code, because each VI will need a copy of the common stuff.

• CDs and DVDs don't work on Presario SR 1830NX

  My CD or DVD work.  In Device Manager, there is a small yellow triangle with an exclamation point that I understand means that they are there, but does not work.  I downloaded the drivers from the HP site.  He wants me to download a CD (does not!) or bootable thumb drive - I put that into the USB port and it popped up I got a new camera, but the site does not recognize and would not download to it.  HP wants $50.00 to fix it for 14 days.  I took it to the Geeks at Best Buy.  They say that it is there, but something is wrong with the system of the OS.  They want $200. diagnos and maybe fix.  OR they suggested that I get an external CD and use it, but if there is something wrong with the system of the OS, it can break down at some point, maybe when I put it in.  I bought an external hard drive to back up what I have, but it has yet to open.  I don't know what to do or how to solve this problem.  I have had the computer for 3 years cela from July.  Any suggestions?  I need to use the CD to install Turbo tax to meet the requirements of the IRS so do without is not an option... Help, please!

  So in Device Manager it gives you a code like 31 or 39? Is the dvd drive appear in the computer? If the answer is Yes and no is the following:

  1. Click Start and type "regedit" in the search field. The Registry Editor window appears.

• Slow down and mix the effect works only together

  Hello

  I have 2 footages from 2 different cameras that recorded the same event and I use Premiere CS6.

  I each sequence of a video track and slow them down to 40%. So I want to use the mixing effect, so in the last third of a scene, the other comes into play, since the camera 2 was set for a close shot.

  However, although mix effect works fine with scenes that are in the original speed, I couldn't make it work when the speed is changed! It seems that it goes with a totally different clip - that exists in the timeline and is in the same way that I wanted to stage 2 to blend.

  For the moment I change the speed setting (or time-remapping), loses the stage 2, in which I applied the effect mix, is the reference for scene 1.

  Any thoughts on how mix slowed the scenes without having to export the first slowed then merger of the output files?

  Thank you!

  I see that there is certainly a problem. I put one clip on another and used the mix to 50%. Worked well. I changed the two clips to 40%, and the clip with the effect looks like it's on the frame to hold on to the last image. A bug for sure.

  Perhaps you'd be happier with a cross dissolve transition between the two elements? At least until the bug is fixed. I suggest that you put in a bug report. I'll do the same.

• Word and Office don't work on Satellite L40 - 14F

  Hello?

  I am Irina of Kiew (Ukraine).
  I just bought a Satellite L40 - 14F and can t use Word and Office (Vista). I have no internet at home, so I can't pass the RECORD for Word and Office...
  What should I do?
  Please, answer me!

  It seems that you are unable to activate Office and therefore you cannot use the software.
  Don t be angry with me, but I don't really understand why you ask for the solution.
  The solution is simply. You must activate the Microsoft software ;)

  Generally, the serial key is always placed on the cover of the CD. There must be a label with a compatible serial key.

  If the software was already preinstalled on this laptop, then you need the internet connection to activate this software product.
  Maybe you can take the phone to your friend or a public place with Internet and could enable desktop.

  Good bye

• Equium A210 - 17I PSAFJE - Lan and Wlan don't work running Windows XP

  Hello

  I recently received this A210-17I (PSAFJE) for Christmas, but to my dismay, it was not compatible with most of my computer games, I decided to downgrade to Windows XP, after reading about how I could do this, I decided to do it myself.

  So far everything works great, with the exception of 2 factors.
  The controller Ethernet and RTL8187B_WLAN_Adaptor, which appear as unknown devices in Device Manager.

  I installed ALL the drivers for download from Toshiba for this specific model page and I have operational including graphics and sound rest.

  The WLAN adapter is strange for me, I downloaded this driver: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=1&PFid=1&Level=6& Conn = 5 & DownTypeID = 3 & GetDown = false & downloads = true (the bottom one for Windows) and it seemed to install OK with the provided setup.exe. But the device is still unknown, and it will not install if the folder "Update Driver".

  I have no idea what to do about the Ethernet controller :(

  Thanks for reading.

  * EDIT: Fixed; D *.

  Looks like you have already decided to install a compatible driver of LAN and WLan.
  Am I wrong?

  It of good to know that the problem is solved

• Help... my monitor and keyboard don't work!

  My monitor seems to go to sleep, it sets up and then the screen goes black... The green light stays on. My keyboard does not at all, he tried cables clear controls, etc. My Hardrive works well... Please help!

  It turns out it wasn't my monitor, l had someone take a look at mt pc + turns that l have a virus! It is set for me so problem solved.

  Thanks for the help anyway!

• just turned on laptop and speakers don't work even tried to update this thing idt have no ideas?

  I tried to download IDT and looked like it had not worked when I check and play sound the bar up and down as if something is playing but nothing doesn't come out. I even tried helmet still nothing. Any ideas?

  Thank you

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  When windows has reloaded, use the Recovery Manager to reinstall your original IDT HD Audio driver as it is stated in the document at the link below.

  Recovery Manager - Windows 8.

  Kind regards

  DP - K

• Windows 7. The left panel of the start menu icons cannot be removed and arrows don't work - please help!

  The left panel of the start menu icons cannot be removed (when I press "remove from this list" nothing happens) and arrows (see illustration) do not work, that nothing is displayed - please help!

  

  Try https://support2.microsoft.com/mats/system_maintenance_for_windows/

  If this doesn't help not try to reset the start menu by default:

  1. Right-click on the Start button and click on properties.

  2. Click the Start Menu tab, and then click Customize.

  3. In the Customize Start Menu dialog box, click on use settings by default, click OK, and then click OK again.