Toshiba 32AV500P - installation of language at startup

Similar Questions

• Re: Question re use of Toshiba Application Installer

  Hey all.

  My model came with a Modem software Toshiba, but I noticed in the Toshiba Application Installer there are a few other modem drivers that are a bit more recent. I installed one of them (Conexant) then uninstalled the Toshiba Software Modem and reboted. When he started, he reinstalled the default Toshiba Software Modem.

  So my question is, is it possible to install and use something other than my original modem? I don't know yet if she installed the Conexant. It seemed that this was the case, but it does not appear in the list of installed programs.

  As I said, the Toshiba Software Modem was the original, the other two are the software Conexant Modem driver and driver Modem Motorola. I don't know why the other two are still here if they cannot be used with my system.

  L305-S5919; Vista 32 bit

  Thank you!

  Hello

  > I installed one of them (Conexant) then uninstalled the Toshiba Software Modem and reboted. When he started, he reinstalled the default Toshiba Software Modem.

  Yes, it installs the default windows driver that is in the folder Windows/system32/driver

  > So my question is, is - it possible to install and use something other than my original modem?

  You must install the driver of modem of origin only. If you try to install other modem drivers, you will get the error as, no compatible hardware detected,

• Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

  Hello!
  I have the problem with Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no preinstalled operating system.
  I do the following:

  1. install Windows 7 x 64 SP1.
  2 Installing the LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE & partNumber = PSK30E-02T002B3 & serialNumber = & USER_ACTION = Serial % 20number])
  3. install all updates of Microsoft Windows
  4. run the installer of the software Toshiba for Win 7 - it installs two drivers and then asks to restart.

  Here is the log for the first test (win7update.log) file:

  12\28\2011 update started at 21:11
  TVALZ_O.inf installed
  E/s installed & memory access driver
  driver_bluetooth_TC00241200A.exe/s/log/test has been installed with the result of the PASS code
  util_tvap_TC00215000H.exe/s/log/test /wait15 was installed with the result of the PASS code
  Updated at 21:29

  After the restart I've run it again and the result is:

  12\28\2011 update started at 21:38
  Toshiba Bluetooth stack has already been installed.
  Toshiba value added package has already been installed.
  Updated at 21:40

  Any help is appreciated!
  Thanks in advance!

  Stand by.
  What are you doing exactly?
  You try to install own OS?

• Toshiba AT200 excite the language settings

  My Toshiba AT200 refuses to turn off the option of correcting text with the language settings. It shows as being off but always auto corrects my text and auto corrects almost every word. It's a total pain trying to write anything. I have to manually fix everything again, and then add to my user dictionary. Anyone who has a solution?

  THX

  Hello

  Try this:
  Go to settings-> language keyboard &->-> Textinput Touchinput-> uncheck completion/word prediction

  Otherwise check if one of your installed Apps don't affect this feature

• How to stop the installer of windows at startup to the top

  Hi, when I start my computer with the windows vista Setup program automatically starts and tries to start the blackberry desktop software, which was on this model but I got rid of him. It's annoying that it stops at the comp to load the rest of the startup programs. Anyone know what I can do to get rid of this nuisance?

  Very appreciated

  QF

  Do not know if this the the right answer for you.
  The next method is to set Windows Installer to MANUAL application Services program so that it does not start automatically when you turn on the computer.

  Windows Installer is supposed to be set to manual.

  Start button > in the search box, type services > press the Enter key > uac prompt > scroll to find Windows Installer > click...
  status section, there should be nothing (empty)
  Unser Startup Type, it is and must be manual
  
  

  
  If this isn't what you see, right click on Windows Installer > properties > change it. See screenshot.

  

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows 7 installation stuck on windows startup

  I have a laptop pro 64-bit of windows 8.1 and I installed windows 7 ultimate on it, and when I run the installation from the cd it happens to a screen like this and he's stuck there. My laptop is preinstalled with windows 8, then I upgraded to 8.1 pro then have windows 7 ultimate and when I install it it gets to the windows startup screen and does nothing. so, how to solve this problem?

  Decommissioning of laptop computers pre-installed with Windows 8 for Windows 7, you must disable Secure Boot.

  I would recommend that also save your installation before doing so.

  http://techingiteasy.WordPress.com/2012/10/29/how-to-backup-your-Windows-8-installation/

  How to disable Secure Boot:

  Disable secure boot - TechNet - Microsoft

• ASM instance after the stand-alone installation of Oracle Grid startup problem

  Hello!
  
  After the Oracle 11 g 2 grid installation and restarting my machine:
  
  Linux localhost.localdomain 2.6.32 - 300.10.1.el5uek #1 SMP Wed Feb 22 17:37:40 IS 2012 x86_64 x86_64 x86_64 GNU/Linux
  
  I run the asmca command and she has no startup ASM instance, I tried to paste the log, but it's too long!
  
  Could someone help me please! Thank you very much!
  
  José
  
  I have just the last piece:
  
  + [hand] [2012-03-15 15:01:56.853 THIS] [SQLEngine.initialize:354] m_bReaderStarted: false +.
  + [hand] [2012-03-15 15:01:56.857 THIS] [SQLEngine.initialize:358] boot player... wire +.
  + [hand] [2012-03-15 15:01:56.919 THIS] [UsmcaLogger.logExit:122] oracle.sysman.assistants.usmca.backend.USMInstance method output: createSQLEngine +.
  + [hand] [2012-03-15 15:01:56.919 THIS] [OracleHome.getVersion:877] OracleHome.getVersion called. Current version: null +.
  + [hand] [2012-03-15 15:01:56.927 THIS] setting [InventoryUtil.getOUIInvSession:347] YES READ to ACCESSLEVEL_READ_LOCKLESS +.
  + [hand] [2012-03-15 15:01:56.927 THIS] /u01/app/grid/product/11.2.0/grid,1+ Homeinfo [OracleHome.getVersion:896]
  + [hand] [2012-03-15 15:01:56.928 THIS] [Version.isPre:274] version to be checked 11.2.0.1.0 version to check against10 + main
  + [hand] [2012-03-15 15:01:56.928 THIS] [Version.isPre:285] isPre.java: FALSE + back
  + [hand] [2012-03-15 15:01:56.929 THIS] [OCR.loadLibrary:308] +.
  Constructor inside the OCR
  + [hand] [2012-03-15 15:01:56.929 THIS] [OCR.isCluster:939] OCRNative call for isCluster() +.
  + [hand] [2012-03-15 15:01:56.930 THIS] result OCR [OCR.isCluster:943] status = true.
  + [hand] [2012-03-15 15:01:56.930 THIS] Boolean result [OCR.isCluster:955] = false +.
  + [hand] [2012-03-15 15:01:56.930 THIS] [Version.isPre:274] version to be checked 11.2.0.1.0 version to check against10 + main
  + [hand] [2012-03-15 15:01:56.930 THIS] [Version.isPre:285] isPre.java: FALSE + back
  + [hand] [2012-03-15 15:01:56.931 THIS] MessageBundle.getMessage () [MessageBundle.getMessageFields:338] failed to load the string PRKC-PRKC-1036: CRS_HOME name passed to the method was no Exception: java.util.MissingResourceException: can't find resources for bundle oracle.ops.mgmt.resources.PrkcMsg, key PRKC-1036: CRS_HOME name passed to the method was null.
  + [hand] [2012-03-15 15:01:56.931 THIS] [ClusterUtils.getCRSActiveVersion:1797] error getting version active CRS: PRKC-PRKC-1036: CRS_HOME name passed to the method was null: < null > +.
  + [hand] [2012-03-15 15:01:56.931 THIS] [OracleHome.getVersion:903] OracleHome.CRSActiveVersion: null +.
  + [hand] [2012-03-15 15:01:57.084 THIS] [OracleHome.getVersion:922] OracleHome.server.getVersion Version: 11.2.0.1.0 +.
  + [hand] [2012-03-15 15:01:57.084 THIS] [OracleHome.getVersion:943] Version of the inventory: 11.2.0.1.0 +.
  + [hand] [2012-03-15 15:01:57.084 THIS] [OracleHome.getVersion:948] using sqlplus: /u01/app/grid/product/11.2.0/grid/bin/sqlplus+
  + [hand] [2012-03-15 15:01:57.084 THIS] [UsmcaLogger.logInfo:141] role SYSASM +.
  + [hand] [2012-03-15 15:01:57.085 THIS] [UsmcaLogger.logInfo:141] OS true Auth +.
  + [hand] [2012-03-15 15:01:57.182 THIS] [SQLEngine.done:2148] actually called +.
  + [hand] [2012-03-15 15:01:57.183 THIS] [UsmcaLogger.logException:171] SEVERE: method oracle.sysman.assistants.usmca.backend.USMInstance:checkAndStartupInstance +.
  + [hand] [2012-03-15 15:01:57.183 THIS] [UsmcaLogger.logException:172] ORA-01034: ORACLE not available +.
  
  + [hand] [2012-03-15 15:01:57.183 THIS] [UsmcaLogger.logException:173] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-01034: ORACLE not available +.
  
  oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1650)
  oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeQuery(SQLEngine.java:823)
  oracle.sysman.assistants.usmca.backend.USMInstance.checkAndStartupInstance(USMInstance.java:573)
  oracle.sysman.assistants.usmca.backend.USMInstance.discoverASMInstance(USMInstance.java:340)
  oracle.sysman.assistants.usmca.service.UsmcaService.discoverASMInstance(UsmcaService.java:146)
  oracle.sysman.assistants.usmca.Usmca.execute(Usmca.java:230)
  oracle.sysman.assistants.usmca.Usmca.main (Usmca.java:333)
  + [hand] [2012-03-15 15:01:57.184 THIS] [UsmcaLogger.logExit:122] oracle.sysman.assistants.usmca.backend.USMInstance method output: checkAndStartupInstance +.
  + [hand] [2012-03-15 15:01:57.184 THIS] [UsmcaLogger.logInfo:141] ASM was able to start. See /u01/app/grid/cfgtoollogs/asmca/asmca-1203153PM0138.log for more information. +

  Start the asm with the following command.

  Starting at $GRID_HOME/bin/srvctl asm

• Installation of language different sets with R12.1.1

  Hello
  
  I have install R12.1.1 (new installation) on RHEL 5
  
  with 5 languages supported in this
  
  English
  Spanish
  French
  Portugese
  German
  
  How can I do with it?

  Hi user;

  I have install R12.1.1 (new installation) on RHEL 5

  with 5 languages supported in this

  English
  Spanish
  French
  Portugese
  German

  How can I do with it?

  In addition to the large post Hussein snoussi . You can follow:

  NLS is not software that is a patch which means after installing EBS as you mention only available American English. For example, you live in Turkey and you need for Turkish language also for your EBS. You must follow:

  1. first of all, download NLS language of electronic delivery partners
  2. Download this zip on your EBS Server
  3. unzip the file and edit the files allowed user applmgr (say your user applmgr is applprod)
  4 before start NLS don't forget your character set Db should support NLS partners (in this example of Turkish language, do not forget this please)
  5. open the screen of your handler applications Oracle's EBS license your OAM Language(here its turkish) using:

  Oracle Applications Manager > License Manager > languages > French)

  6 log in as user applmgr soruce env file, then run utulity adadmin

  Choose:
  4. maintain Appl menu. database of entities

  then

  * 3. Maintain the multilingual tables *.

  7. when that is done that close your application services, run adadmin and take your system in maintenance mode

  8. go to the directory of NLS related patch and run adpatch utuiliy and begin to patch

  That's all

  If you need to apply an other NLS (for example Romanian), you follow the same steps before applying Romanian NLS patch

  These measures also mention on my blog:
  http://heliosguneserol.WordPress.com/2010/06/10/how-i-can-apply-NLS-patch/

  PS: Please don't forget to Patch of Performance application for patching (8576725) before the early NLS patches

  Respect of
  HELIOS

• Installation disk - error 0xc00000e9 Startup Repair recovery image

  My problem is simple. I wanted to restore to factory settings so I followed a 'how to' guide.
  I reboot and was pressed F8 to open the menu where the option "fix my pc. I select, a bar starts to fill and then it should open another menu with different catering options. But what really happens is that I get this error:

  "Windows has encountered a problem communicating with a device connected to your computer.

  This error can be caused by unplugging a removable storage device, such as a USB external drive when the appliance is used, or by faulty hardware such as a hard drive or the CD-ROM drive which is a failure. Make sure that all removable storage is properly connected, and then restart your computer.

  If you continue to receive this error message, contact the manufacturer of the equipment.

  Status: Oxc00000e9

  "Info: an unexpected i/o error has occurred."

  I can´t understand the error so I'll contact the manufacturer. Thx for the help.

  If you are not able to run HARD drive recovery, the problem might be related to HARD disk problems.
  If would like to know if its possible to retrieve the laptop using the recovery disk.
  This disk should be created using recovery Toshiba disc creator software pre-installed on the notebook normally this should be done on the first day of purchase

  However, if the laptop's warranty covered, get in touch with service to solve hardware problems.

• Upgrade to Windows 7 Toshiba DVD - installation on the new partition

  Hello

  I have Vista Home Basic 32 - bit Edition pre-installed on my laptop Portege M800-11J

  I received the DVD Windows 7 Toshiba upgrade by mail

  I was wondering if it is possible to follow the Vista partition and installing 7 on the 2nd partition? the product ID from conflicting?

  No, there is no conflict

  regards jim

• Installation of windows at startup

  When I start the computer, I have a black screen with a blue box rectangular. I have said my number of admin and the computer is normally with the registration screen. I get my my admin info and I get 'Welcome' on the screen, until this OK. Then I get the message "Windows Installer". After a while, I get "failed signin message. I restart the computer and then it is normal.

  @DaveBaz1

  Welcome to the HP Forums, it's a great place to get help, find answers and advice,
  Thanks for posting your request, I'll be more than happy to help you.

  If I understand well you are unable to connect to windows after the message - 'windows setup', you also mentioned, after a reboot, it's normal, you want to say 'normal', as it does the same thing over and over again, or it starts normally your desktop computer as it should?

  With your product please reply number & windows operating system used as well (Please keep in mind that you do not share personal information, such as telephone, email ID, serial number, etc...).

  I would be grateful the clarification so that I can provide an exact solution, thank you in advance!

  Kind regards

• Windows XP automatically installs the drivers at startup; never ends

  So my dad the help of Windows XP, and it has a problem.

  When he start the PC, it will not just go on the desktop, but instead, it shows a screen with "installation of drivers. Please wait. "on this subject. Yet, when he waited, it just never ends. Please help, thanks.

  Hi, ViviNur,

  Start the computer and start typing the F8 key

  Select Safe Mode

  Once the loading Safe Mode, open a command prompt window

  Press the Windows flag key + R to open the run

  Type CMD

  Press enter

  Type sfc/scannow

  Press enter

  Note: There is a space between sfc and / scannow

  Asked may to your installation media if it finds corrupted files.  System File Checker will replace files

  Open window CMD again by following the steps listed above

  Type chkdsk /F /R

  Press enter

  You will receive a message saying that the volume must be locked and you want to monitor during the recovery.  Press y and press enter

  Restart the computer to start the scan

  If there are corrupted files, chkdsk will fix if it can

  When the scan is complete, Windows reloads

  Let us know if you need assistance.

• Toshiba satellite a305-S6905 freeze at startup

  Toshiba phone freeze at the start of window screen... I can't type in the form... Problem laptop: does not start... I put in the disk repair or wipe the hd, but as soon as I clicked on repair or install the following screens are invisible to me. I know because I played a little clicking on and a Help menu came. Can not do anything good. !

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Toshiba phone freeze at the start of window screen... I can't type in the form... Problem laptop: does not start... I put in the disk repair or wipe the hd, but as soon as I clicked on repair or install the following screens are invisible to me. I know because I played a little clicking on and a Help menu came. Can not do anything good. !

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hé M. krome

  If you are having problems using the toshiba recovery options I would suggest that you contact toshiba support for assistance

  You can contact toshiba link below

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Walter, the time zone traveller

• Windows 7 Ultimate - Windows Update error Code 0 x 80070052 during installation of language packs

  Hello

  I get error 0 x 80070052 when I try to install a language pack on Windows 7 Ultimate. I get the same error with different language packs. I get the same error that I go through Windows Update or download the Setup file manually.

  I pulled the Setup log, but I'm stuck at this point because I don't understand what "CBS: error 0 x 80070052 IGNORED - the language is not COMMON" means. I am pasting the Setup log (I hope that's not too long for the forum). I would be very happy if someone can help me debug this issue.

  17:36:39:602: DEBUG: found it (C:\Windows\servicing\TrustedInstaller.exe) process

  17:36:39:603: PERF: CbsClient::Initialize - LEAVE

  17:36:39:603: PERF: create the language of cabin (C:\Windows\SoftwareDistribution\Download\Install\lp.cab) - ENTER

  17:36:39:762: DEBUG: CreateFromIdentity("Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~ja-JP~6.1.7600.16385")

  17:36:39:762: DEBUG: CreateFromIdentity ("customer")

  17:36:39:762: ja - JP LanguagePack created.

  17:36:39:762: type: MUI

  17:36:39:762: identity: Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~ja-JP~6.1.7600.16385

  17:36:39:762: PERF: ParseMUIComponentInCab - ENTER

  17:36:39:762: PERF: DpxExtractFileMaskFromCabinet - ENTER

  17:36:40:199: PERF: DpxExtractFileMaskFromCabinet - LEAVE

  17:36:40:292: PERF: ParseMUIComponentInCab - LEAVE

  17:36:40:292: PERF: create the language of the CAB - LEAVE

  17:36:40:292: PERF: Worker::EnumerateLanguagePacks:-LEAVE

  17:36:40:292: PERF: CbsClient::Initialize - ENTER

  17:36:40:292: PERF: CbsClient::Initialize - LEAVE

  17:36:40:292: language ja - JP, added to the queue of the operation

  17:36:40:292: PERF: CbsClient::Initialize - ENTER

  17:36:40:292: PERF: CbsClient::Initialize - LEAVE

  17:36:40:292: PERF: enumerating installed languages - ENTER

  17:36:40:292: DEBUG: CreateFromIdentity("Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.1.7600.16385")

  17:36:40:292: DEBUG: CreateFromIdentity ("customer")

  17:36:40:292: LanguagePack US created.

  17:36:40:292: type: MUI

  17:36:40:292: identity: Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.1.7600.16385

  17:36:40:292: WARNING: could not open key "reg" language

  17:36:40:308: PERF: enumerating installed languages - LEAVE

  17:36:40:308: license questioned 'Kernel-MUI-number-Allowed', value: '1000 '.

  17:36:40:308 : License "Kernel-MUI-Language-SKU" queried, value: "en-US;ar-SA;pt-BR;zh-TW;zh-CN;zh-HK;cs-CZ;da-DK;el-GR;es-ES;fi-FI;fr-FR;de-DE;he-IL;hu-HU;it-IT;ja-JP;ko-KR;nl-NL;nb-NO;pl-PL;pt-PT;ru-RU;sv-SE;tr-TR;bg-BG;hr-HR;et-EE;lv-LV;lt-LT;ro-RO;sr-Latn-CS;sk-SK;sl-SI;th-TH;uk-UA;ar-EG;tk-TM;fy-NL;qps-ploc;qps-plocm"

  17:36:40:308: license questioned 'Kernel-MUI-language-Allowed', value: 'EMPTY '.

  17:36:40:308: license questioned 'Kernel-MUI-language-denied', value: 'EMPTY '.

  17:36:40:339: PERF: initialization of ja - JP - ENTER

  17:36:40:339: DEBUG: redesigned and moved progress: 1-> 24

  17:36:40:386: DEBUG: CProgressBar::SetRange (0.100)

  17:36:40:386: DEBUG: CProgressBar::SetPosition (5)

  17:36:40:386: PERF: RestorePointStart - ENTER

  17:36:40:386: PERF: RestorePointStart - LEAVE

  17:37:19:226: CBS: error 0 x 80070052 IGNORED - the language is not COMMON

  17:37:19:226: EC: CbsClient:Terminate()

  17:37:19:226: PERF: operation of ja - JP - LEAVE

  17:37:19:242: INFO: Session 0x1fc6a8 finalized, no notification of restart is no necessary

  17:37:19:242: WARN: CbsSession::finalize error: 0 x 80070052

  17:37:19:242: INFO: destroy CbsSession 0x1fc6a8

  17:37:19:242: INFO: attempting to re - finalize the session 0x1fc6a8 has not acted on

  17:37:19:242: InstallThread: back language ja - JP

  17:37:19:242: PERF: initialization of ja - JP - ENTER

  17:37:19:242: INFO: created Cbs session 0x1fc6a8

  17:37:19:242: INFO: Session 0x1fc6a8 finalized, no notification of restart is no necessary

  17:37:19:242: INFO: destroy CbsSession 0x1fc6a8

  17:37:19:242: INFO: attempting to re - finalize the session 0x1fc6a8 has not acted on

  17:37:19:257: PERF: call NotifyUILanguageChange - ENTER

  17:37:19:257: PERF: call NotifyUILanguageChange - LEAVE

  17:37:19:257: PERF: RestorePointEnd - ENTER

  17:37:19:257: PERF: RestorePointEnd - LEAVE

  17:37:22:258: ExitProcess: there were shares of CBS failed in the queue! (80070052)

  17:37:22:258: PERF: RestorePointEnd - ENTER

  17:37:22:258: PERF: RestorePointEnd - LEAVE

  17:37:22:258: DEBUG: cleaning work in a new process path

  17:37:22:273: ExitProcess: there was an internal error: 0 x 80070052

  Thank you for pointing me finger the CBS.log André. I solved my problem.

  It turns out that Windows had a problem unpacking the language pack; He could not create the necessary file in my TEMP folder. I had too much RAM on this system, so I thought it would be a good idea to do a virtual disk stripe and place my temp folder. I got a 4 GB RAM drive using the FAT32 partition. I still don't understand why the decompression operation failed, but everything worked after I changed the TEMP environment variable to my BONE NTFS partition. Watching the decompressed content, it seems that there are thousands of files and thousands of directories for the language pack so that may have contributed to the failure.

  I want to thank you for taking the time to help me. I appreciate your help.

• Windows 8 on PC Toshiba laptop installs the drivers, but will not print on printer J4680 via USB

  Install windows on a Toshiba laptop 8. Installed the drivers for a printer Deskjet J4680 0n LPT1 through a usb cable.  Install looks like it is complete and presented in the material, but not in Word 2010.  In settings displays error. Don't know where to look for error, no code.

  KCC

  Suggest that you only contact HP.  We do not support hardware and software from Microsoft.