Toshiba 40L1353DB - HDMI cross

Similar Questions

• Toshiba 32PU200EJ - HDMI port does not signal

  My toshiba TV series 32PU200EJ unable to connect to the HDMI port,
  last week, it was OK,

  I use it just for the PS3 game.
  When I try to connect the HDMI to PS3 or laptop, it says "unsupported SIGNAL".

  ANYONE can help with this problem? Thanks :)

  The TV supports multiple HDMI ports. Right?
  Have you checked the different HDMI ports?

  Reset you the default settings?

• Toshiba TL939 - HDMI does not work

  Hello world.

  My name is Matthew, I am a beginner.

  I just bought new TV; Toshiba TL939.
  The problem is that after restarting the default TV system, HDMI does not work.

  Connect me my TV cable HDMI with Satellite NC +.
  It's decoder signals. Yesterday, everything works fine.

  Today - this.
  My mother pushed something in the remote control, then back to the factory settings, you know... Mothers ^^

  Please help me.

  What do you exactly by THAT HDMI does not work?
  Have you chosen the right HDMI channel where your satellite receiver is plugged?

  Please read the user manual:
  http://www.Toshiba-OM.NET/LCD/PDF/English/TL939-4046-English.PDF

  Select the right external input source.
  (page 7)-> button 2

• Toshiba 40L1353DB - need to stand screw details

  Hi all

  I bought my 40L3453DB some time ago and mounted directly on the wall.

  Now I have to remove it and put it on one foot, but he seems to have misplaced the screws of the stand. :(

  Does anyone of you know where I can get them or what kind of screws are needed?

  Thank you very much
  M

  Hello

  The screws are not known to me, but I recommend you take a screw as a sample and to visit the construction market next to the city center.

  I guess the dealer will be able to provide the same type of screws

• Need drivers for my camera HDMI TV

  Good evening!

  Hi Im from Spain. I think you can see in my English :) and my problem is the following:

  I bought a camera a few years ago and I lost the driver CD and I need it! I searched your site diferent but I've not found anything: S
  My camera is Toshiba Camileo HDMI... could you help me please?

  Thanks a lot for everything :) Your little Spanish Companion: P

  Hello Zonder,

  first of all, please tell us the exact name of your camileo cam.

  You say you lost your cd drivers, but you don t need the drivers for the cam.
  You can connect to your computer via the usb cable. The cam would be recognized automatically.

  If you mean that the software (Acronis) appearing on the cd, so I can't give you good news.
  Toshiba is not allowed to copy this software. It s on the copyright.

  But you can get in touch with ASP in your country.
  Here you will find the list of local ASP worldwide:
  http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service provider

  Guys should be able to provide more detail and perhaps it might be possible to order this disc.

  Best regards

• NB510 - 10 d: unable to launch the disk external multi PA3834E-1DV2

  I have a new NB510 - 10 d with 1 GB of memory mounted factory and bought the Toshiba external drive cross (PA3834E-1DV2) recommended, but I can't seem to run on my computer even when connected to the 2 USB ports and current alternative.

  The drive works properly when connected to my desktop computer, what should I do or add to make it work on my netbook?

  Hello

  There is no necessary requirement.
  The drive is just a device plug-and-play USB 2.0 if you n t need drivers or software to operate.
  As you say, the player works through desktop PC it seems that the ODD is OK.

  In your case, I recommend the reader in all USB ports.
  Also set the BIOS by default to ensure that it would be a good BIOS setting.

• Satellite M40X - impossible to install the LAN driver

  Heya,

  I wonna set up a local network with my laptop and my home pc. There is just this one problem, that my M40X doesn't. I connectet my homepc and the toshiba with a cross-over cable. He worked at my home pc. The two winXP. The toshiba it shows me "cannot find cable network."
  I installed the driver, you can get here on the page, nothing. all firewalls are declining.
  I know that there a patch for win2000 but not for winXP.

  can someone, please.

  Hello

  Are you sure that the cable is plugged solid?
  Have you tried the plug with the different cable?
  In my opinion, you can try to run the Pc Toshiba ConfigFree and the diagnostic tool and check the result.
  Unfortunately, I put t have information on some patches

  Good bye

• Re: Satellite L875D-S7332 - screen blurry on an external screen after sleep

  I have successfully used an external monitor as a second monitor plugged into my laptop Toshiba Satellite HDMI connector for almost a year. I am running Windows 8.1.

  I recently added a happens 24 "monitor to the laptop's VGA connector. This means that I have now two monitors of similar sizes, sitting at the same level, instead of my computer 17 "laptop on a riser.

  The implementation works fine except that when I wake up my system from sleep, the text is extremely blurry on my Samsung screen. It is on the Dell monitor. The same problem is if I try to change all the properties in the control/display panel.

  My Toshiba video card is a Radeon 7520 g and I have updated the drivers since this problem started.

  Claire Type is enabled.

  I have also tried to disconnect and reconnect the monitor, nothing helps. Setting parameters in the control/display panel does not solve anything.

  The only solution is to reboot completely and I'd rather avoid this because it takes 10 minutes to restart completely all my different accounts (multi Dropbox) and applications.

  Samsung say it is nothing to do with them and to check with Toshiba, where the post here. (My serial and model numbers are not recognized so I can't submit a request by e-mail and no one answered the phone).

  Thanks in advance for the advice,

  Hello

  I put t know if it would be useful, but I had a similar problem
  I have an external LG 23 monitor and I plugged my laptop LG port HDMI output s HDMI IN port.
  The image on the external monitor is really blurry. I used the best resolution 1920 x 1080, but the text was not clear.

  Then I did some tests and connected the laptop's HDMI out s monitor DVI-IN Jack.
  This is the key! The 1920 x 1080 resolution is the same, but the text and the image were pretty clear.

  Maybe you should also connect the laptop with DVI instead of HDMI port

• Equium A100 - 147 PSAABE - Win7 PVAT error

  Hello all, I hope someone can help.

  My A100-147 was supplied with XP as an operating system. I just did a clean install of Win7 Professional 32-bit. All necessary system drivers have been installed the disk during installation, with the exception of the Flash Media, as there was no Win 7 drivers listed for her [here: http://www.toshiba.co.uk/innovation/download_drivers_bios.jsp?service=UK&mode=allMachi nes & action = search & teddProduct = 695 & selShortMod = 476]

  I installed a 32-bit driver Vista 2.0.0.6 - IEC (FA-20070709130655) which works very well.

  Everything is good so far but my problem is I cannot adjust the brightness of the screen and the function keys (Fn + F6, etc.) do not work. I thought the Toshiba Value Added Package 1.2.40 would fix this but I get an error when I try to install it. Installation error PVAT. 0x8146045B I also tried the plu PVAT 1.2.28 but she also creates errors.

  So any advice on how to get my Fn buttons work would be much appreciated.

  Thank you

  It's always a bit difficult to get an old books with new BONE. I checked the Toshiba download page and many drivers, tools and utilities are available for your laptop model.

  According to my experience of software (such as 0x8146045B) errors is not easy to fix, and I got it long with Toshiba power saver. Only way to get rid of it was to reinstall OS and reinstall all the stuff.
  What you can try is to clean the registry entries, but I know if this will help.

  There is one very important thing: drivers, tools and utilities must be installed in order for the proper installation. Unfortunately there is no such list but try to install more to my list of things I could ve used to install Win7 32 bit on my Satellite A300:

  -Win7
  -chipset driver
  -Storage Manager
  -display driver
  -driver sound
  -modem driver
  -utility supervisor
  -infrared
  -patches
  -configfree
  -VAP
  Hardware - Toshiba
  Control - HDMI
  -WLAN driver
  -Toshiba assist
  -Card reader
  Driver Webcam-
  Driver - Synaptics

  If you have any other questions you are welcome.

• Qosmio X 875-Regza-link does not work

  REGZA-link does not work. When I connect to laptop to Toshiba TV HDMI cable, there is no icon regza-link on TV and I can't control the media player to the TV remote.

  At your Qosmio laptop factory settings?
  With other words do you use with preinstalled OS that you got with it?

• Need advice for installing Win7 on Satellite A300

  Hello

  I intend to buy Satellite A300-1MT (PSAGCE), and before I do I just check if there are still some problems with drivers for W7 for this model?
  On other forums, I saw that there are some problems with drivers like music keys, webcam, touchpad and FN keys and so on...

  So, can someone confirm me that all drivers are now available and everything works?

  And also until I started installing drivers is there anything I need to know (wait used?) Or perhaps better: does anyone have a special notice?

  Please, find the will to respond! Thank you very much!

  Hello

  I have the Satellite A300 running Win7 32 bit, but my model is PSAG8E.
  To be honest I have very good experience with installing Win7 on Satellite A300 and I can recommend you to install on this Satellite.

  If you visit the Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads you will see that your laptop model is supported Win7 and it shouldn't be problem to install all the necessary drivers and other stuff of Toshiba.

  Here is the list how I did this exactly:
  atellite A300 (PSAG8E) and clean Win7

  -Win7
  -chipset driver
  -Storage Manager
  -display driver
  -driver sound
  -modem driver
  -utility supervisor
  -infrared
  -patches 1.2
  -configfree
  -VAP
  Hardware - toshiba
  Control - HDMI
  -WLAN driver

  Everything works well but lacks some drivers

  Added Vista tips:
  Toshiba - help - working properly
  -Card reader - installed correctly
  -Webcam driver for A500 - tested with Skype - works correctly.
  Driver - Synaptics

  Win7 works well and I am very satisfied. No problems with the feature keys FN.

  If you are going to buy this laptop start installation Win7 following this order of installations. Please inform us of problems and I hope that we can help you about this.

• Satellite A300 (PSAG8E) - hardware problems after I installed win7 ultimate

  Hello and good day,

  I installed win7 ultimate a few days ago, windows was able to recognize most of my material accepts my build of microphone and camera and another component, I'm not sure what it is (Windows Update automatically downloaded the driver of sound and graphics for me).

  My questions are - where you can find the remaining drivers and where can I get the preinstalled Toshiba tools and software? (The site pilot in the support page Toshiba does not include drivers and software)

  Thank you very much
  King Ben Simon

  Hello

  I have the Satellite A300 (PSAG8E) too and installed Win7 Home premium and everything works perfectly.

  Initially, I must say that I do not know where you are looking for the drivers and tools of Toshiba and that all things because utilities are downloadable on support Toshiba & download page under http://eu.computers.toshiba-europe.com

  It is logical that MIC will not work if you have not installed the appropriate driver. Installing drivers only and not using Microsoft update. What you need are the real and tested and not some free drivers of the internet.

  Go to the Toshiba download page and install all the stuff following this order of installations:
  -Win7
  -chipset driver
  -Storage Manager
  -display driver
  -driver sound
  -modem driver
  -utility supervisor
  -infrared
  -patches
  -configfree
  -VAP
  Hardware - toshiba
  Control - HDMI
  -WLAN driver

  Everything works well but lacks some drivers

  Added Vista tips:
  Toshiba - help - working properly
  -Card reader - installed correctly
  -Webcam driver for A500 - tested with Skype - works correctly.
  Driver - Synaptics

• Satellite A300 stops without reason

  Hello

  Since the transition from win vista to win 7, my Toshiba Satellite A300 stops without reason.
  To install win 7 at Toshiba, I downloaded all the drivers for Win 7 and I installed.
  The bios has been changed.

  What should do?
  Thank you for your future responses.

  Hello Dustin

  Everything on this world happens with some reason.
  I have Satellite A300 too and that you are using Win7 32 bit for 6 months. It works perfectly, and so far I did not notice a problem with it.
  To be honest I don't know what you did exactly, but if you want to have fine under Win7 Satellite A300 install Win7 clean version and other stuff like follows:

  -Win7
  -chipset driver
  -Storage Manager
  -display driver
  -driver sound
  -modem driver
  -utility supervisor
  -infrared
  -patches
  -configfree
  -VAP
  Hardware - toshiba
  Control - HDMI
  -WLAN driver

  Everything works well but lacks some drivers

  Added Vista tips:
  Toshiba - help - working properly
  -Card reader - installed correctly
  -Webcam driver for A500 - tested with Skype - works correctly.
  Driver - Synaptics

• Satellite A300 1 5 - freeze at startup

  Hello..

  I [Satellite A300 1 G 5 | http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new = Yes & PRODUCT_ID = 1055589] which came with windows Vista SP1 32-bit initially, but I decided to test windows 7 Ultimate 32 bit on my laptop for the love of performance better. However, my experience is not funny, so far, I have problems at the start of the laptop, once the Bureau instructed the icons on the icon bar takes so long to load, when that happens I can't do anything like open the start menu, or so her delay as the laptop for a long time that I give up and hold the power button shut down the laptop down... I've had this problem 3 times in January and 4 times on this month! I checked the event viewer in Control Panel of windows, I found the critical error that says the following:

  ================================================== ==================================
  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.

  Details:

  -System
  -Supplier
  [Name] Microsoft-Windows-Kernel-Power
  [Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

  Event ID 41

  Version 2

  Level 1

  Task 63

  Opcode 0

  Keywords 0 x 8000000000000002

  -TimeCreated

  [SystemTime] 2010-02 - 18 T 08: 36:32.232818800Z

  EventRecordID 23051

  Correlation

  -Execution

  [ProcessID] 4
  [ThreadID] 8

  Channel system

  Radwan-computer laptop

  -Security

  [User name] S-1-5-18

  -EventData

  BugcheckCode 0
  BugcheckParameter1 0x0
  BugcheckParameter2 0x0
  BugcheckParameter3 0x0
  BugcheckParameter4 0x0
  Fake SleepInProgress
  PowerButtonTimestamp 129109557149197177
  ================================================== ========================

  one last thing, my laptop is often BSoD after the awakening of fashion 'sleep'... and it restarts automatically so I can't collect a lot of information... but the windows solutions Center says something about the driver ATI... but I have the driver from toshiba Web site, do not know if there is a way to fix this problem as well.

  looking for postponed for your help...

  Thank you...

  I have very good experiences with Satellite A300 and Win7 installation. No problem at all.
  I can see on the download page of Toshiba that your model of laptop is fully supported for Win7 and everything you need to do is install all the stuff of Toshiba in order of good facilities.

  My order of facilities is:
  -Win7 Home Premium (new installation)
  -chipset driver
  -Storage Manager
  -display driver
  -driver sound
  -modem driver
  -utility supervisor
  -infrared
  -patches
  -configfree
  -VAP
  Hardware - toshiba
  Control - HDMI
  -WLAN driver

  Everything works well but lacks some drivers

  Added Vista tips:
  Toshiba - help - working properly
  -Card reader - installed correctly
  -Webcam driver for A500 - tested with Skype - works correctly.
  Driver - Synaptics

  I don't really know what you're doing wrong. Maybe some background process block put into regular service.
  I recommend to try again and make easy step by step following my list and let me know what stage you will be faced with the issue described.

• Satellite A300 - 20v Win 7 drivers are not completed

  Hello:

  As a first step, I would like to thank all employees of Toshiba support for their hard work.
  However, there are a lot of drivers that not supported yet, and they are very important.
  As:

  First of all:

  Touch Pad Driver
  LAN driver
  Wireless LAN driver
  Card reader controller
  Driver webcam

  Second:

  Assist
  TEMPRO
  Utilities SD
  PRO series
  Face recognition
  Tiles for Mobility Center

  Third:

  Silent, Bluetooth Monitor, acoustic Robson, Modem on Hold Utility, driver Modem region Select utility, WPS library, and TRS.

  Please help quickly because they make too much trouble with us (especially for me)
  Because we cannot operate without these drivers.

  Thank you

  Post edited by: MEMO_1

  Hello

  Yesterday, I installed Win7 on my Satellite A300 (PSAG8E) and I'm very happy with it.
  You're right about the pilots, but it is not so difficult as you think. All things missing can be installed for Vista.

  Here is a brief overview of what I did to have perfectly working Win7:

  -Win7
  -chipset driver
  -Storage Manager
  -display driver
  -driver sound
  -modem driver
  -utility supervisor
  -infrared
  -patches
  -configfree
  -VAP
  Hardware - toshiba
  Control - HDMI
  -WLAN driver

  Everything works fine, but some drivers are missing.
  So I added some Vista stuff:
  -toshiba assist - works
  -card reader - installed correctly
  -webcam driver for A500 (wanted to have the latest version) - tested with Skype - works
  -pilot of the Alps - all ok, but no additional options for touchpad

  I hope this will help you.
  If you have any other questions let me know.