Toshiba LCD 37wl66zs white screen!

Similar Questions

• White screen on Toshiba virtual store - account 33090

  Hello

  I have created a personal account Toshiba today and after updating the app, I get white screen.

  Help, please... Personal account is 33090
  Thank you.

  Thank you for the request.
  Your virtual shop Toshiba 33090 account has been reset.

• Studio 1535 with white screen and "ERROR CODE: 0321 LCD EDID - EDID EEPROM ACCESS IMPOSSIBLE.

  Studio 1535 (laptop with Vista and NOTE from the ADMIN: tag removed in accordance with the Service Privacy Policy > suddenly, showing no display a few days ago.)  I tried to unplug the power cord and the battery, and make a stop by pressing the power button, but none of these methods have had no effect.  I got nothing else than a white screen, but when I fix a monitor external, everything works fine on the external monitor.

  Also, I have the flashing volume control keys and I was wondering if this could be a clue to what is happening and what needs to be corrected?  The Mute key and the Volume up key flashing on and outside at the same time.  The low Volume key is regularly.

  Then I run the diagnostic test that I had "ERROR CODE: 0321 LCD EDID - UNABLE to ACCESS EDID EEPROM '

  No idea if this could be a backlight or LCD question, question of video chip or broken cable?    Thank you!

  Hi JITeglia,

  I suggest you to replace the LCD LVDS cable on the system first, since it is the cheapest part. If the system is still facing the same issue to replace the LCD screen.

• Screen LCD 19 inches of HP w1907s: wf1907 - white screen

  My friend is having problems with its monitor and currently cannot go on the forums or get technical support itself. I come here to get clear answers on what might happen, rather than going by my pure speculation. I do not have this control myself, so this is outside my field of exact experience. (She also lives in another State and I can't help or look at the configuration physically. I'll have him describe as much as she can to me.)

  I know, she has a Compaq WF1907 monitor with its configuration of the desktop (Windows 7 PC). Just today, she used her computer and suddenly the screen of the monitor has started to Flash a little until it became all white. She tried to restart it and it just does the same thing every time. After awhile, he completely exploded.

  She found a new spare cable to replace the other connect its monitor to your computer, and it has only allowed the monitor to return completely white again.

  My first assumptions were in the realm of a graphics card is going bad, or in loose / damaged cables. However, she has a new graphics card that has been installed recently and made the first speculation probably not (I'm not sure what his graphics card is good - just that it's brand new). Speculation of cable is uncertain now because not even another cable helped the white screen go away. This shrink me down to thinking, this is a problem with the screen itself, but I'm not sure.

  So I came here to ask about it for my friend and she needs answers as soon as possible. She has things she must do it on his computer, but now its own monitor screen is out of use. Can she do now?

  @just-a-guest, welcome to the forum.

  Here is a guide that can give you a little help.  I agree that this is very probably a monitor failed.  The image on the Product Specifications page and the fact that it is a Compaq, it seems to be older.

  The video card is newer does not mean that he could not have failed.  I got a new out of the box be DOA.  So, does it completely.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Satellite A350 - white screen of death

  Hello

  Recently, I broke my screen in a fit of anger and sent him to Toshiba repair.
  They replaced my screen. It was a month ago.

  I installed windows 7 3-4 days ago and it worked fine.
  I opened my laptop one night to discover a white screen empty.
  After turning it works, take the battery and the white screen remained, and then it appeared randomly with system restore options

  I restored the system and apply a fix from microsoft to counter the supposed error windows 7. It did not work.
  White screen when I put the laptop to sleep (the laptop stop) or stop it.

  The screen appeared again yesterday and I left it all night in the hope that this would change.
  My sister took out and put back in the battery and a screen appeared asking how you would like to start windows.
  I started windows then reinstalled Windows Vista using a mirosoft installation disc.

  After the installation of AVG Antivirus it tells me to restart.
  I restarted the laptop and instead of the toshiba logo on the white screen of death appeared.
  He stayed for 10-20 seconds then my laptop started.

  I looked at this article (http://www.laptoprepair101.com/laptop/2008/04/13/laptop-lcd-screen-turned-white/) and suggested that the screen may have problems. I should send it back to Toshiba?
  Can someone provide diagnostics?

  My specs:
  Intel Core 2 Duo CPU P7450 processor
  2.13 ghz
  4.00 GB RAM
  32 bit OS

  So basically, I have a white screen randomly when I reboot, turn on, or put the laptop to sleep. If he get's a strange thing to many factors. I don't think that its my OS because what happens on Vista and Windows 7

  Please help as much as you can. I didn't wan't to take it in for repair as it can cost money

  Hello

  For me, it looks like hardware problem.
  It s hard to tell if it s graphic card issue or display problem.
  But if the display has been replaced a month ago, then I would recommend contacting the guys again. I mean the part could be faulty again and my knowledge, replaced parts are covered by warranty for a short time then perhaps that the warranty would cover it once again if the display is faulty

• Satellite P300 - white screen after waking from sleep state

  I'm having this problem:
  The LCD screen may be empty when the computer is "awakened" from the sleep state. Nothing is visible on the internal LCD or an external monitor.

  There seems to be a solution:
  An update of the firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.

  described here: [white screen after awakening from fallback status | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1642844&moid=1209152]
  -----
  I also found this, but it didn't really help me much further.
  [Satellite P200D and WinXP: no display after waking from sleep mode | http://forums.computers.toshiba-europe.com/forums/click.jspa?searchID=880412&messageID=118143]
  -----
  In fact, I think I'm able to solve myself, and I don't like not my laptop to be gone for two weeks or more. I just need some advice on where to find a correct upgrade. Is - this driver BIOS or graphics? Which version should download, where... etcetera. More tips on how to solve the problem are also welcome.

  -----
  Edit: link and no need for words of line. : s
  Edit2: grammar correction.

  Hello

  > An update of firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.
  If you check the Toshiba document you would see that your Satellite P300 is not related to this issue.

  In your case I would recommend upgrading the BIOS and graphics driver.
  In addition to keep your operating system up-to-date.

  I had this problem under Win XP and a MS patch and an update of the graphics card driver helped solve this problem.

• MacBook pro white screen A1502

  I have macboook pro a1502. When I start the computer, I have white screen... And I expect in 5 minutes, the light of the LCD is on... But the screen remains white. I try to press the power button / stop + ctrl + opt + r + p no effect. I don't know how to try again. In my city no call center and I don't know where to fix my mac. I have in the West of Padang, sumatra Indonesia... Sorry my English so bad... Thank you

  Your Mac can do the simplest thing is to start with the down Option. This code here everything in ROM, and if you get the chime, your processor and a bit or RAM work as well.

  Startup option (also known as the name of the Boot Manager) draws a blank screen, then during several minutes, adds an icon for each potentially bootable Volume. If your drives are always answers and seem to be bootable, you should get two icons, one for Macintosh HD and one for recovery. If you have a heating engineer/DVD in the drive, which must also be indicated.

• Tecra A11 - 113 - white screen and the cursor of the mouse during the boot

  Hello

  My Toshiba Tecra A11-113 with win 7 32 bit boots with a mouse cursor and the visible white screen.
  I tried to start under different boot options. Mode, safemode, last repair job configuration
  and msdos command only... all these startup options give the same result.

  I also tried with win 7 32 bit dvd, but same result.

  I am able to access the C drive by booting with a linux key, so the data is visible.

  Can someone please give me a solution?

  Thank you

  What happens if you access the BIOS? Is menu visible on-screen BIOS?
  Turn on the unit F2 button and press.
  This should allow you to access the BIOS.

  If you will be able to access the BIOS and see everything as usual, then the screen is OK and I think there is a problem with your installation of Windows System.
  So boot from the Toshiba Recovery disk should help you solve this problem.

  You said that you already tried to boot from the Windows DVD disc is this Toshiba Recovery disk? In my opinion, you use this disk to restore the laptop to factory settings.

• After account reset white screen again

  After reset, my personal account has changed, the old 23183 is now 33500 and I have the same problem - white screen.

  Hello

  It looks like a problem with the Toshiba online store I n t think that account reset might help since other users here in the forum have reported the same problem.
  I think you have to wait that Toshiba has solved this problem.

• Satellite M50 - white screen after login on Win 8.1

  Satellite M50 running 8.1 Win
  After login, download mouse white screen, but nothing else.
  Can run Explorer.exe manually via the the Task Manager for go, but some applications like Acrobat and Windows Mail does not work.

  I searched online and tried all sorts of fixes suggested without result.
  Any suggestions gratefully received!

  I don't know what the problem is here, but you can try to Win8 will stop completely and check the repair options. Try again with the system restore and roll back the OS a few days back. Maybe this will help.

  http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

• Re: Satellite A210 - white screen if I try to play COD 4

  Recently loaded COD 4 on my system, but get a white screen when you try to play the game after the success of the download.

  Windows experience side is 2.8. Is it possible this game on my laptop or can I do to make it work?
  I have 2 GB of memory, but 128 MB allocated for graphics I think, you can allocate more?

  Thank you very much.

  You're sense of Call of Duty 4?

  Before you try to play a game, you should check the system requirements first. You video RAM size can t be Exchange but I think 128 MB should suffice.

  Have you tried to update the driver of your laptop display? You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Last but not least have checked if there is a patch for COD 4? If this is not the case, do it!

• Satellite C855 - white screen after BIOS update

  Hello

  I am a beginner user,
  I have Satellite C855
  Yesterday, I downloaded a 'update BIOS"that was sent to my computer.
  Since that my screen is blank, there is a hum in the background.

  I have a recovery back up on my external hard drive, but of course, the screen is blank so I don't know how the product.

  I think I must have downloaded a model or the update was not compatible.

  Hello

  White screen do you mean that nothing appears on the screen?
  You see the start screen of Toshiba, or if you are able to access the BIOS?

  Where this is not possible, try this:
  Disconnect the power adapter, remove the battery.
  Press and hold the power button for about 30 seconds.
  Then connect the two parts (batteries and AC adapter) for the laptop and try to turn on the unit.

  In case this would not solve the problem of the laptop, I'm scared of m the BIOS update was not completed successfully and I think that only authorized Toshiba service provider would be able to help you.

• Satellite C650D-007 starts with a blank white screen

  Hello world

  I need emergency aid, 3 weeks ago, I bought this new laptop from Futureshop.ca and now, today, I pressed the power button to turn it on and when it does I get this white screen of white.

  I even tried removing the battery and connect the AC and it always produces the same thing.

  I can't believe after that only 3 weeks it has stopped working.

  PS: it feeds on. just a white screen empty. No logo nothing.

  Thanks in advance.

  Hello

  In the past I didn't had this problem but it must be hardware related issue, so you need to do is to contact Futureshop, explain the problem and ask for replacement.
  Second option for you is to contact the nearest Toshiba service directly. They can check your laptop and replace the defective hardware.

• White screen on Equium P200

  Hi all!
  yesterday morning I started my computer, after 5 min, I close the lid, and I'm going to work.
  When I'm back back I opened the lid and I get a white screen.
  Well, I think is right for the moment. I restarted but white screen again.
  I restarted many times but nothing. I heard the noise of vista hard drive to work, but I don't get nothing on the screen. I'm trying to connect an external monitor but nothing.
  Anyone have this problem? I Don t has an idea of what I can do to recover the normal screen of you.
  If I use reinstall drive I lose all my data and I don't want to. Can someone help me with a few great ideea what can I do?
  Thank you much in advance.

  A white screen usually means that the backlight is on but no signal reaches the graphics card on the screen. This could have many reasons such as:

  -a broken screen cable
  -graphics card failure
  -view controller malfunction
  -some short circuit between the graphics card and the screen

  In your situtaion I use warranty (if still present), sending the machine to the [the closest available service provider | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] and have them check the hardware on some failures...

  That's all I can tell you from my experience with white screens...

  Welcome them

• Satellite Pro M40 sometimes starts with white screen

  Hello!

  I'm pulling out my hair with this problem.

  For no definable reason that according to me, my laptop will start with a blank screen.
  Not all the time, but, seemlingly, whenever it feels like I need extra help stress on my plate.
  For the most part, with perseverance (starting with or without battery, with or without the adapter, with or without pci with or without mouse usb network card and any combination of these elements), it ends by lights correctly, but sometimes Nothing that I won't get it to start and show me a screen.

  My M40 is 4 months old.
  Since it's purchase sent to Toshiba for repair twice for this problem, when I have exhausted myself trying to coax it into life. Whenever he was sent by saying either the problem has been fixed, or that he had no problem found/all systems ok / "it works very well for us, after testing all week."

  This week [edit: it was Wednesday], I sent it to me, and Yes, I checked the trunk upwards and gave a sigh of relief that there is an image on the screen.
  I wrote a letter to this topic a day or two later (that day he first gave me a screen white, but on closing down and restart, it was fine).
  Today, however, not a week later, I have a white screen again.

  I am reluctant to send for repair again, due to the stress involved and the time it takes and the technicians speaking it works for them.

  If anyone can help, or was faced with a similar problem, please respond.

  Oh, and the solution does not lie with the keys FN + F5, because I tried several times... unless there is a way to 'special' to build on them, I'm not in the running for!

  [Edit]: several hours later, as a demonstration of her bored this problem is, my screen is once more working.

  I went on once again, at the time and no joy. Then, after switching OFF, count to ten and the restart, eureka.

  I'll update with news as it happens. If there are all the necessary specific details about "switching on the environment", just let me know.

  Post edited by: jazziefox

  Hello

  Thank you for your update.
  It's a very strange question, and it would be very helpful if you can put yourself more observational.