Toshiba NB200-10Z problem with SSD

Hello friends,

I have following question,

I have a Toshiba NB - 200 10z since 2010 and was very pleased with its durability and strength, for the use I've done (the simple navigation, document processing, films etc.)

Recently, in order to improve its performance I replaced the casting on (5400 RPM) hard drive with a new drive Kingston SSD or 128 GB.

After that, and with no other hardware changes, the netbook seems to be 100 times slower than before :-(

Sounds familiar to anyone? What could be the cause for it?

Thank you in advance!

Huh... I think you're the first person who reports on the SSD upgrade on this old model of netbook. I have more recent NB520 and always use it with the original HARD drive but use SSD on other machine Satellite.

What I m missing in your assignment is some info on preinstalled OS. Have you installed recovery original image (OS original version you got with your machine) or your own version of the OS?

By default the BIOS settings too.

Tags: Toshiba

Similar Questions

  • Toshiba NB200-10Z change HARD drive to SSD

    Hello. I plan to buy Toshiba NB200-10Z netbook. I would like to ask if the next drive 'OCZ-OCZSSD2-1VTX60G 60 GB Vertex Series SATA II 2.5 SSD Drive' will fit this netbook?

    Post edited by: Lee

    Hello

    The SSD must fit into the laptop with no problems, because it s the same size as a HDD normal (2.5).

    The point is if SSD drive will work in NB200. Normally, an SSD should work on all SATA interfaces, so in your case, I would try an SSD.
    After that, you can validate the experience with this player. I am interested in. :)

    Good bye

  • Toshiba NB200-10z - creator.lnk recovery disk is not available

    Hello, I have a problem with my Toshiba NB200-10z netbook, when I run creator of recovery disk Toshiba with that I get the window:

    The unit or the network connection to which the link refers to "creator.lnk recovery disk is not available.
    Make sure that the disk is properly inserted or the network resource is available and try again

    How can I solve this problem?

    You want to create the recovery disk or recovery image stored on USB flash media?

  • Power cord for a Toshiba NB200-10Z bought in the United Kingdom EU?

    Hello

    I just ordered the Toshiba NB200-10Z of Amazon.co.uk because the model wasn't available everywhere in Finland, despite being listed on the site of Toshiba Finland. It ' probably be only with the style UK power cord & plug-and - my concern is where can I find a power cord appropriate for the unit (with a schuko type plug)? Or are the UK and different EU cords also at the other end where they plug in the power adapter, which is what I need to get a power adapter and a power cord?

    Thanks for any information.

    Best regards
    Boucicaut

    Hello

    I agree with Al - eX. As you can see on the underside of the adapter AC/DC it can handle voltages range from 110 to 240 volts.

    You need only a new power cord. Therefore, you can contact the service provider authorized in your country. Maybe you can exchange the cable and if you get one free.
    Alternative go to your favorite computer store. Such a cable, you must find there too.

  • Toshiba NB200-10Z: after upgrade (for Win7) FN does not work

    Hello
    I'm sorry for my bad English but I'm Italian: I hope you understand me.

    I have a problem with my NB200: I improve my operating system from Win XP to Windows 7.
    So I don't see that FN does not work (in particular, the wireless button!)

    I'm trying to install a lot of drivers (HW installation, Manager wireless), but already I can't use wireless (to connect my netbook online, I use a wired connection!)

    What can I do?

    Thank you very much

    ENCI

    Post edited by: enci

    Edit: ah, I think that VAP does not exist for my netbook (http://it.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=IT)

    I checked the Toshiba download page, and you are right about VAP.
    Try reinstalling the Flash Cards Support utility.

  • Toshiba NB200 - startup problem (Windows XP) - unable to access safe mode

    Hello

    I have a laptop Toshiba NB200 with Windows XP. When I turned on, it would not start past the first screen and I couldn't make F8 safe mode.
    The only thing I can do is go into the BIOS Setup, and that's all (press F12).

    The BIOS recognizes the hard drive. Then, I created a USB stick to boot from and that made me a C: quick MSDOS having first changed the BIOS to read the USB first and also updated the BIOS (Phoenix v1.6).

    I'm not clear as to what I do then in the folder c: prompt will not let me run windows and shows just the files on the USB key.
    Should I copy the files from windows to the USB port? In addition, how will I know if the hard drive has failed and that it is unrecoverable (I hope not)?

    Any guidance welcome!
    Thank you

    Hello

    Eventually, there is no Windows OS on the HARD drive and therefore you can not start safe mode or the OS.
    You have a recovery disk or you did backup the image of Toshiba on the USB flash key?

    If this isn't the case, then you need to reinstall the OS of the own Windows XP CD.
    You could build a clean Windows XP USB flash stick that can reinstall the OS.
    I think that this should be possible since you started the laptop backpack.

    Here's a nice instruction how to do this:
    http://wiki.EeeUser.com/windowsxpusb

    Good luck

  • Toshiba Tecra A3 - problem with Port Replikator III

    Hello

    I have a problem with a Toshiba Tecra A3 combined with a Port Replikator III. Both work very well together until you disconnect the laptop computer. After you start the Toshiba Tecra A3 without the Docking Station, everything is always ok. But when I anchor again and start it, Win XP is not able to display the logon session on the external monitor screen. All configurations, I did (for example only display on external monitor) with the mobile extension module are only available after login. But when I don't see the logon screen, I can't do that; (o). so, does anyone have a solution how can I use the external screen after the boot (without using the FN + F5) key.

    any help is much appreciated
    Thank you
    Mario

    Hello

    As far as I know logon window can be displayed on the primary monitor only. Computers laptop LCD is set to a primary, and it cannot be changed. As you can see this option is grayed out in display properties.

    Good bye

  • Toshiba journe touch problem with youtube...

    Hello... I have a problem with my touch journ.e... I opened the opera browser and try watching the YouTube video but I get a file not supported error message .swf format. Some animated content cannot play... and I can't see the videos from YouTube...

    I have try on i.e.i press video shows windows media player is launched and then I get another error message that says:

    Please if anyone can help that would be great... Thank you

    Hello

    I n t have this unit, but try to do hard reset. How to do this, you can read HERE.

    Good bye

  • Toshiba Satellite A60, problem with Pinnacle PCTV USB2

    I bought Pinnacle PCTV USB2 and I get no video but audio only on my Toshiba Satellite A60. I tried to put it on the line with Pinnacle support, but they say it is an Ati Radeon problem, who can solve a new problem of driver. Anyone of you has an idea about this problem?
    Thank you and sorry for my bad English.
    Celestino
    Italy

    p.s. with other pc as my PCTV works well

    Hello
    There is a new Radeon Ati Graphics Driver on the Net.
    You can try if it works on your system.

    Look, here is the link for more information and the driver-> http://www.bebits.com/app/2938

    Hope this helps you

    BR

  • Toshiba NB220-12W - problem with HARD drive - need to install the OS

    My apologies if this is posted in the wrong section.

    I have a 12W NB22, which I believe is more made. I tried to install Windows 10 that seemed to download without any problem.

    However after turn off and turn on again, I was faced with a black screen and a message saying: an operating system not found.

    Assuming that the hard drive is damaged it is simply

    b replace the hard drive with a new and
    (b) install a new operating system. ?

    Any help would be welcome

    I want to buy it. Is this useful?

  • Toshiba Camileo H30 problem with conversion of avchd video files

    Hello

    I have Toshiba Camileo H30-camera, how do I convert video files saved in FullHD mode in any format/good quality files that can be read by a DVD player?

    When you left unconverted, they can't even read from the remote hard drive connected to the TV.
    I know that his camera records videos in the form of AVCHD files with h264, but have no idea how can I covert them to any format reasonable and recently used.

    I tried some converters, but no positive effect.

    Help, please!

    Hello

    You can use converter like AVCHD Converter applications.
    This would convert AVCHD files to .avi format.

    But AFAIK the VLC Player should support the AVCHD file format and you could use VLC player to play movies recorded in this format.

  • ThinkStation S30 has problems with SSD MX100

    I installed a MX100 Crucial 256 GB SSD in my S30 machines running Windows 8.1.

    The BIOS seems to recognize the MX100 and I was able to do a new install of Windows 8.1 which seems to work OK.

    However, the Crucial software Executive Storage fails to find the SSD in the machines so I'm not able to update the firmware to the latest version. Also, I tried to update the firmware using the ISO Crucial manual method that does as well.

    My Windows 8.1 installation is up-to-date and as suggested in one of the messages on the forum, I installed a RST from Intel software.

    Anyone has any ideas, any suggestions on how I can get the softare to run on the ThinkStation S30.

    Psuturtle thank you very much for your answer. You are quite correct.

    I had the MX100 connected to the blue SATA UCS port. I coonected drive to port 15 and was able to update the firmware using the ISO manual method.

    However, Executive Storage still can't find the drive. I did a comparison test on the two types of SATA port and the port SATA of UCS is much slower than the legacy port. So, your help is very appreciated for helping me resolve the MX100 in ThinkStation S30.

    See you soon

  • White screen on Toshiba NB200 10Z setup

    I turned on my new netbook and the screen comes on, I hear the music but nothing happens and the screen remains blank. The power is working and the indicator buttons are all green. No idea what I can do to implement?

    Hello

    Maybe the screen has been switched to external monitor?
    Try the FN + F5 key combination.
    This allows you to switch between external and internal.

    If this is not enough, then I'd is advised to remove the battery and unplug the power adapter for a while wait for about 1 hour and connect the two parts.

    Check it out.

  • Is it possible to upgrade NB200-10Z with 3G modem?

    I have a Toshiba NB200-10Z (P/N PLL20E-002011RU), and it has no built-in 3G modem.

    Is it possible to insert a modem, as Ericsson 3507 g, is there a free mini-PCI-E slot, slot of SIM card and antenna for it?

    In addition, it would be great if it were possible to have access to data from Toshiba HDD Protection sensor to automatically turn off the screen and perhaps use as a virtual joystick sensor! Someone did he do suah a pilot already?

    As much as I know, these updates is not possible. The hardware platform of your laptop is not ready for these updates. Forget it.
    Moreover, when you want to order these parts?

    Second question is really interesting, but kind of funny and I wonder, really, that you think something like that. Virtual joystick? For what?

  • Toshiba NB200 Touchpad not smooth?

    I bought a Toshiba NB200-10Z this week and I am satisfied with my purchase, very elegant. The only thing is that if my fingers are dry the touchpad feels a little rough smoothly, by sliding your finger over it. But if my fingers were a little moisture on its fine and smooth to use. Everyone is faced with this problem? I don't think it's a problem with mine individually I think it's the texture of the touchpad.

    Thank you
    Ben.

    Hello

    I never noticed this issue with touchpad surfaces.
    If you are talking about the touchpad feature then I would recommend checking the touchpad settings in Control Panel-> mouse
    Here, you can edit and assign different options that could help you make the most sensitive touchpad

    See you soon

Maybe you are looking for

  • Upgrade memory on the Satellite L300 problem

    My laptop is a Satellite L300 PSLB8A 047004. I bought a kit of 2 x 2 GB modules and inserted carefully following the instructions (they clicked in place). When the computer reboots, the power light comes on, the fan was on but no other activity and t

  • I downloaded Windows 7 Pro and secure download manager. When I click the button start nothing happens.

    I downloaded Windows 7 Pro and secure download manager. When I click the button start nothing happens. What do you think is the problem? original title: failure to launch

  • HP CLJ 4600n: 68,0 Permanent storage write Fail

    I got the "68,0 permanent storage write Fail" error popping up regularly on the printer.  It can be erased by pressing the loan, but he always returns shortly after.  I did an init NVRAM, which did not fix the problem.  The printer is on a network, i

  • D010wn flow 11: driver not available Wifi

    The os wifi my laptop new Stream stoped working, I tried to update windows and even restore to factory settings. But wifi still doesn't work do not. No airplane mode on, no driver not recognized. Nothing.

  • Lack of drive Matshita UJ8C2

    On my Inspiron 15 3521 Matshita UJ8C2 drive is missing. It does not show in the Device Manager or my computer. Last night I copied the files on DVDs and Make an audio CD with no problems. I do know that if I should try to reinstall the driver, I was