Toshiba Stor.e ALU 2 s 3.5 "does not work with my XBOX

Similar Questions

• 200 M from Toshiba does not work with 10W connected/Vista Home Basic 32-bit

  Dear Sir

  I m having a problem with my Toshiba M200 laptop, it shows no text display or clear blue/green screen or different models with the connected 10W. But it does not work with the battery. Afer complete the system startup and normal screen if I connect the power 10W then works perfctly ok. The same procedure should be followed evertime I use my laptop.

  Can someone guide me weather it is a hardware problem or software related problem?

  Dipak Chowdhury

  Hello

  Have you checked with a different AC adapter?

  This seems to be a hardware problem.  You will need to contact the manufacturer of your computer to be able to find a solution to this problem.

  http://forums.Toshiba.com/

• Toshiba Stor.e partner 1 TB, clicking and does not

  I've had my Toshiba Stor.e partner 1 TB external hard drive for only less than a year after going on holiday with her in my bag I go back and it does not work. Even when I plug in the USB 3.0 slot is all for that click.

  Sometimes the computer recognizes it is connected with the noise but he then instantly disconnects again.

  Any help will be greatly appreciated.

  In my opinion, you should contact your local dealer and make a warranty claim.
  On this virtual path, I can't say for sure if the HARD drive has a hardware problem but this clicking noise is very suspicious to me.

• Satellite L500 1QK - output HDMI does not work with a Toshiba DVD player?

  Hello

  Why Toshiba DVD player does not work when I plug the HDMI out on my other bigger screen...

  While he plays well the DVD on the computer and, if I can get the signal HDMI OUT with VLC playing other video formats...

  I hope there is a way to unlock this, because I prefer to play DVDs on my computer (for his problem because I have the ear is not good)

  Thank you in advance for your help, if you can.

  Kind regards.
  Mylène
  (Satellite L5001QK France)

  Hello

  To be honest I n don't know 100% what your problem is.
  If you want to watch DVD movies on your computer with the help of a reader DVD Toshiba but the captain must be indicated on the external screen follow these steps:

  When you have connected the HDMI cable (other) outside on the screen, use FN + F5 and switch to the external display only. When you see the desktop on the beginning of the display external Toshiba DVD player and I think that everything should be OK.

• Toshiba NB200-10Z: after upgrade (for Win7) FN does not work

  Hello
  I'm sorry for my bad English but I'm Italian: I hope you understand me.

  I have a problem with my NB200: I improve my operating system from Win XP to Windows 7.
  So I don't see that FN does not work (in particular, the wireless button!)

  I'm trying to install a lot of drivers (HW installation, Manager wireless), but already I can't use wireless (to connect my netbook online, I use a wired connection!)

  What can I do?

  Thank you very much

  ENCI

  Post edited by: enci

  Edit: ah, I think that VAP does not exist for my netbook (http://it.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=IT)

  I checked the Toshiba download page, and you are right about VAP.
  Try reinstalling the Flash Cards Support utility.

• Toshiba Satellite c855-S5123 does not work with just the AC adapter

  My Toshiba Satellite laptop c855 Windows 8 has suddenly stopped loading and when the adapter is plugged. The light output at the front was not lit and the loading icon was gone. I tried another outlet but nothing, I also removed the battery, but it does not light with only the adapter. Finally, I opened the laptop to check if the plug was broken and I also tested the power provided by the card - that everything is perfect. Currently, my battery died, so I really need help.

  Hi Davis,.

  I have problem is with the hardware in the computer. I suggest you to check the problem with Toshiba. Please follow the link below to send the query on the from Toshiba Web site:

  http://forums.Toshiba.com/T5/computer-troubleshooting/CT-p/cat_troubleshoot

  Hope this information is useful. Thanks for posting in case you have any additional questions, I'll be happy to help you.

  Thank you.

• Toshiba canvio 1 TB portable hard drive does not work with windows 8

  The drinking Toshiba Canvio 1 TB hard drive is compatible with Windows 8?

  Hi Michael,

  Welcome to Microsoft Community and we are happy to help you on this question.

  According to the description of the query, the Toshiba Canvio 1 TB portable hard drive does not work on the computer.

  I ask you to answer some question in the context of this question:

  Do you have an error message when you try to access the hard disk on the computer? If Yes, what is the exact error message you get?

  I would like to inform you that the Toshiba Canvio portable hard drive is compatible with Windows 8.

  You can check the link to verify this compatibility with Windows Compatibility Center:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Toshiba%2Bcanvio%2Bportable%2Bhard%2Bdrive%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Please answer us with the required information on this issue in order to help you.

  Let us know if you have other Windows related issues.

• Dual HDMI display does not work with Toshiba still WT8

  Hi all

  I noticed that the duplication of the screens via HDMI is not possible with the Toshiba still WT8. There seems to be a recognized problem, however, my question is:

  Is it possible to manually operate?
  When released the drivers/fix at Toshiba?

  Thank you.

  The tablets micro HDMI to HDMI Cable port with Type D connector can connect.

  To select the display mode, you must go to:
  Control Panel (this can be found under System Windows Apps view)-> appearance and personalization-> display-> Change display settings-> avancΘs-> list all Modes

  Now, select one of the modes in the list all Modes

• Toshiba HDD Protection - Shock Sensor Driver does not work with Vista

  I have improved my Tecra M7 for Vista Ultimate last weekend and there are a number of things that do not work. It's very frustrating because I followed the procedures shown on this website diligently upgrade and will have problems.

  Can someone tell me what zip file contains the utility Toshiba HDD Protection shock as I installed everything (except the Config Free because the Zip file seems to be corrupted) and I can't find it anywhere. I noticed that when Vista was recommend the automatic updates after installation it is recommended an updated driver for the HARD disk Protection utility, but is nowhere to be seen and I can't find an installer for anywhere. Does anyone know how to handle this?

  Thank you very much

  Chris

  I don't know if it will help, but try to use the utility disk for Tecra M9 protection.

• Toshiba secured 500 GB does not work with Vista 64 bit

  I bought a Toshiba 500GB (PX1668e-1he0) guaranteed, and I can't install it on my PC with Windows Vista Ultimate 64-bit.
  On the box says it works at least with Vista, but I can't install it.
  When I plug it i and autorun start I have an error message: the digital signature is not valid and it is impossible to install it.

  Now, I've read that this device must be compatible with 64 bit OS
  http://APS2.toshiba-tro.de/KB0/OPT1103320000R01.htm

  What can I do to make it work?
  Why Toshiba still sell this device if it is not compatible with the current operating system?

  Is it possible to update the digital firm pilot?

  PS.

  The security problem is on:
  Audit with the following \XXXXX\BIOLOGIN\securelogin-x64.sys file of Microsoft Windows security

  Hello

  Yes, according to the document, it is possible to use this HARD drive with 64-bit system.
  The software is updated

  As far as I know, you can connect the HARD drive to the PC then right click the CD part of the hard drive you and choose install or program.
  Should work

• Toshiba Tempro does not work with Vista 64 bit Ultimate

  Why Toshiba Tempro don t works with windows vista 64 bit ultimate mey Satellite A300 - 1 l 4?

  Any idea where I can find a solution?

  Thank you very much

  Hello

  I m not very well why it doesn't work on Vista Ultimate, but to my knowledge, there are a few Vista Toshiba Utilities and tool that are not fully supported by Ultimate.

  But why you use Tempro? This tool reports only if a new driver has been transferred on the Toshiba driver page.
  OK, it's interesting to know that a new driver is available, but if your laptop runs without problem I wouldn't update or reinstall anything s!
  There is a proverb which says: never change a running system.

  Welcome them

• BD Playstation Bluetooth remote control does not work with Toshiba BT stack

  Hello!

  I've matched Playstation Bluetooth Sony BD remote control (model: CECHZR1E) with Windows XP SP3 (Spanish) PC last Toshiba Bluetooth Stack v.7.10.12 running.
  But if I press the buttons on the remote does not respond any personal computer.

  I have configured the battery Bluetooth to run the AV and AV service must send commands to Windows Media Player. In Windows Media Player, I have configured to use command AV Toshiba.

  If I press a button on a remote control, with he can link to PC, the icon changes color and Configuration Bluetooth appears the link has been established, but it is the interaction I get this remote control.

  Please, advice that tests should I use or do I have to install any additional software.

  Thanks in advance for your kind attention!

  Ensure that the AV remote control Service is running:
  Right mouse click on Bluetooth-> Options... system tray icon-> [general] tab: 'AV remote control Service' (must be verified)

• Drive HARD TOSHIBA CANVIO 3.0 does not work with USB 3.0 ports

  Hello

  I bought an external TOSHIBA HARD USB3 CANVIO 3.0 disc MORE.
  I and laptop computer from other manufacturers that support USB3. When I connect the USB2 HARD drive it works and I can copy or paste my files but when I connect the HARD drive to the port USB3 that it doesn't work and my laptop cannot detect HDD with USB3.

  I've updated my driver USB3, once again, but when I connect it to USB3 just turn on the blue light and nothing more.

  Please tell me what can I do to solve my problem?

  This link is my HARD drive type and model: http://storage.toshiba.eu/cms/en/hdd/external_drives/

  Thank you

  Have you tried to contact support for laptop and ask whether something should be activated or changed for this port USB3.0? Maybe some BIOS settings.

  If possible, try to check the functionality of some other USB3.0 available PC/laptop.

  As much as I know there not something special that will help you. It is Plug & Play device.

• STOR. E partner HARD drive does not work with USB 2.0

  Hi all

  I recently purchased a 1 TB STOR. E partner HDD and it worked without any problems on my laptop Macbook Pro which has only USB 2.0 ports.

  A few days ago, the HARD drive has been disconnected from the laptop without ejecting first, and now it isn't recognized more than my laptop.

  I tried on a PC Windows with USB 2.0 and 3.0 ports and discovered that it is recognized when I plug in the port 3.0 but not on version 2.0.

  What should I do to have the HARD drive works again with USB 2.0?

  Many thanks in advance,
  Eduardo

  > I tried on a Windows PC with USB 2.0 and 3.0 ports and discovered that it is recognized when I plug in the port 3.0 but not on version 2.0.

  Stor.E partner HDD needs maximum power of my 900.
  The USB 2.0 port provides 500mA just
  If you can connect the HARD drive to two USB 2.0 ports using a USB cable in Y
  Or another option: connect a USB hub with external power supply between the HARD drive and the USB 2.0 port

• TOSHIBA Power Saver does not work with the limited user account

  Hello
  This same question has been posted in 2006 - not by me - with no successful response. I try again.
  If you create a user with the account of restrictions (member of the local USERS group) under XP, it cannot manage or power options Windows embedded and the Toshiba Power Saving tool.
  I managed, working on the file and registry permissions, to have power options Windows works. But I can not yet launch the Toshiba Power Saving tool, it always skip - rises the box 'you have no rights. "

  Is there really anything I can do to work around this problem?

  Thank you

  Yes:

  Log in as administrator
  Run the Toshiba Power Saver
  Go to "configuration Options".
  Check "Allow Limited user to change settings"