toString then split() do not work!

Similar Questions

• A few days ago I installed some updates and since then, Norton does not work. It shows a red exclamation point.

  Original title: norton malfunction

  A few days ago I installed some updates and since then, Norton does not work. It shows a red exclamation point.
  Help, please.

  Contact Norton support. It's their product.

• No CD-ROM with ergonomic keyboard 4000, then things do not work

  Hello Allayas!  :-)

  OK, so I recently bought a:
  Microsoft 4000 ergonomic keyboard

  Only problem is that it didn't come with the CD-ROM, which usually has the drivers, other software/freeware and instructions and so on and so forth.

  IE: for example -.

  • I can't use 5 programmable keys at the top of the keyboard, in the Center, and I think ' they are supposed to be the most important because of their location and so on.
  • The Zoom slider in the middle of the keyboard is ab-so-lute-ly, nada! [Samething goes for the key with the big star on this subject.]
  • Almost all the buttons do nothing. Not at all.
  • more there are things written on the front of the keys, I have no idea what to do with them. They have words like: {copy, paste, cut, search, save, all pointed out, new open, print, italics and they also} a few buttons that work, like, on the F12 key, it says 'print', well I say is for printing

  Is it possible that I can get a 'friend' to post, so I can download the contents of their CD, as everything in a folder and let download me, or you can send it to me to.

  Thank you very much

  I'm Brucie, Morano

  E-mail address is removed from the privacy *.

  P.S. - Do not hesitate to write me a note or an email, if you want to help me oout, OK?

  Hello

  Natural Ergonomic Keyboard 4000<- drivers="" and="" other="" help="" -="" set="" to="" your="">
  Windows under the heading downloads

  https://www.Microsoft.com/accessories/en-us/products/keyboards/natural-ergonomic-keyboard-4000/B2M-00012

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• On startup, I get the application has generated an exception... Process ID = 09 has 4 (2468), wireless id0x9b8 (2488) and then JLTdebugger does not work 0 x 2 (2) - how to debug manually?

  I have recently upgraded from XP Service pack 1 to Service pack 3 and now have IE8 and Norton 360.

  Hi Racheala,

  You have any startup program... Click Start-> programs-> startup. Try the clean boot mentioned in process:http://support.microsoft.com/kb/310353.

  I hope this helps.

• Close button does not work

  I've updated to Windows 10, all good, then I updated to the latest version of Thunderbird Beta (40.0) (or so I think) and after I've updated if I remember correctly, he told me that that would cause my Silverlight plug-in to stop functioning properly due to be unsupported.

  After having said all that, the question is that none of the buttons on the top right of the working window. I can go out with Alt + F4 and File > Exit and Max with double click on which must close the application, but it doesn't. Everything else works correctly, as far as I am concerned except this.

  Thank you

  Aiox

  Too bad then, it did not work. Wonder what could be another way to solve this problem. Maybe it's a bug that is already present in their tracker?

  Hmm. interesting, it seems that by changing the false mail.tabs.drawInTitleBar in the fixed configuration editor. Maybe I should have tried that first. So bad, I don't remember so far. But no matter, the issue has been resolved, now it would be nice if it was not present on the future for future users versions since it could make their experience of Thunderbird to go awry.

  I thank you for your help Matt, have a nice day,

  Aiox

• Flash audio does not work in Firefox 31.0

  Audio Flash works in chrome. Have tried without success the following:
  -Reset of Firefox
  -Reinstall the Flash plugin

  Thank you for taking your time to help out me.

  EDIT:
  I noticed in all: plugins list for 'FutureSplash Player '. Which maybe has something to do with the problem?

  On Linux Adobe ceased support Flash for Firefox.
  There is only security update of Flash 11.2 available.
  If web pages requires a newer version of Flash then they will not work with Firefox and you would have to use Google Chrome.

  This happens with all the pages that use the Flash plugin?
  Did you check if the player has a volume slider?

  You can see the issues with cookies and 'Delete the Cookies' from sites causing problems:

  • Edit > Preferences > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  You can try to erase the Flash local storage and settings.
  Adobe Flash Player preferences: storage

  Flash Website storage settings panel:

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html

  Global storage settings panel:

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html

• 25.0A1 Nightly of Firefox (on Linux) - proxy (SOCKS) does not work

  Hello

  I am using SSH tunnels to create a SOCKS proxy. When I used Firefox 23 it works fine, when I use a recent version of every night, don't worry. I use an add-on of FoxyProxy normally, but I tried to turn it off completely and use the proxy settings internal (SOCKS, localhost, 6789) then it does not work either.

  I understand, you may need more detailed information, but please specify what information you require.

  Thanks for your help

  I'm really sorry, I have some additional info

  I tried to run every night in safe mode and manually set the SOCKS proxy and it works as assumed.

  In this case, it might be a problem with the addon code

• Generated code with edge of adobe for my site does not work with fireox, but done with IE9 and chrome. Why?

  The first time I opened Firefox with the code in my site, it has worked. Since then, it has not worked. I tried it on another computer and it worked perfectly. This computer is running under Windows XP.

  Reload Web pages, and ignore the cache.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Cmd + Shift + R' (MAC)

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  With the help of "Forget this Site" remove all of this area like bookmarks, cookies, passwords, cache, history, and exceptions, so be careful if you have to keep the passwords or other data of this site.
  
  You can't recover from which "forget" unless you have a backup of the affected files.

  It has no lasting effect, so if come back you on such a 'forgotten' site, then the data of this Web site will be saved once more.

• Touchpad does not work after update Win8.1

  I've just updated to win 8 to 8.1 and since then my touchpad not working any ideas

  Hey thanks for the comments.
  The key is that your touchpad working again.

• Satellite 1100 - CD player does not work properly

  Hello, I had problems with my cd player, it will not read anything under windows, but it will read my CD to restore DOS system and restores my whole system. I called someone at the helpdesk and he said to try and restore the system and see what that is and it did not even a difference, please help!

  Hello

  I think that your staff Helpdesk had run Win XP system restore to restore the operating system! If this does not work, you can try to reinstall the standard CD/DVD driver in the Device Manager!

  If this does not resolve the problem, according to me, that a full recovery of the system must be done! Then it will not work!

  Good bye

• Bluetooth does not work since installing Vista SP2

  I have a HP Pavilion dv6 1128tx laptop.  It has bluetooth built-in and used to connect to my phone without problem.  I recently upgraded to Vista SP2, and since then, bluetooth does not work.  In the control panel when I click on bluetooth devices it does not connect, and when I click on bluetooth, nothing happens.  I downloaded the latest drivers from HP, I installed it is said in the end the process there is no bluetooth device installed and the only option is to cancel the installation.  I've been on microsoft site http://support.microsoft.com/kb/960531/ where I used the option "fix it for me", which has removed the option of Control Panel devices and I don't know how to fix this!  I followed the instructions from HP on this page http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=au&product=3938840&docname=c00915262, but I don't see anything on bluetooth technology on the Device Manager page.

  Any thoughts? !  Ta!

  HELO JosieC, welcome.

  In Device Manager, there are all the devices with a yellow mark ! next to them? Is there an 'unknown' devices listed?

  You could try the system restore to restore the computer prior to the installation of SP2.

  1. click on START
  2. Type "System Restore" (without the quotes) and press enter
  3 follow the prompts to restore your system to a date BEFORE the problem started

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Reference Dell OMSA - does not work after the installation of KB3161608

  I recently installed the last batch (June 2016) the MS updates on our servers.  It went well with the exception of two servers, both running Server 2008R2 and a PE2970, a PE2950.  These are our only two servers running server 2008R2.  On both machines, after installing all the updates, I was unable to open OMSA.  The browser will display "Internet Explorer cannot display the webpage".  OMSA continued to work properly on the rest of our servers, which are almost server 2008.

  I tried another browser, but that has not worked.  OMSA reached 7.3, so I downloaded and installed 7.4.0 and the 7.4.0.2 updated.  I found references to similar online, and some of the install OMSA fixes problems using the prompt, or "runas admin".  I installed them all over the place, but no matter how I installed it, I got the same result!

  I've not found errors in the event logs of the server.

  So I started uninstalling updates until I found the one who broke it, and it was KB3161608.  Uninstall this update fixed OMSA on both servers.

  This updates is listed as optional, so I'm not sweating it for now.  I believe that this is a certificate problem and could be fixed by creating a new self-signed server certificate, but this isn't really my area of expertise.  But I wanted to put this out there in case it might help someone else.

  In my tests, you should communicate the updates installed then OMSA will not work.

  KO 3161608

  KO 3172605

  KO 3172614

• Steam did not work properly,

  Original title: Chkdsk issue

  Hello, I ran a chkdsk on my PC that Steam was not working properly, this seems to solve the problem until I restarted my PC, then steam would not work.

  is there everything what I should add to my chkdsk command, I am currently using chkdsk C:/r

  Maybe you can tell us what "Steam not working properly" and "then Steam would not work" means exactly.

  If you were / are getting some screenshots of the error messages, exactly what they say (not paraphrase please) or post.

  There is nothing wrong with running chkdsk with error correction (except it may take some time), but what compelled you think that would solve your problem not specified steam - was - that something you read somewhere as a possible solution to your problem not specified or have you just felt like a good thing to do in time?

  Why do you think the problem is with Windows and not with steam?

  If the steam was the problem what did you find when you have asked about it in the Steam support community?

  http://steamcommunity.com/discussions/

• BlackBerry Smartphones Blackberry Internet Service does not work because of alleged network problem

  Service provider changed APN on cellular network of 'internet' to 'without limitation' and since then, BIS does not work and the host Routing Tables are empty. The AFN was changed no doubt, but still not BIS. Changing TCP/IP settings had also no effect. Service provider has now said that RIM should fix things, one server RIM and asked this, but it doesn't seem to be any progress and whenever I call customer service, I have to explain the whole story. Swopper SIM with another phone with works by BIS, so the phone itself is very good. Any suggestions on how to fix this?

  It is now almost a month and there is simply no progress to solve the problem. I was told that RIM would contact me directly, what has not happened. Should I cancel BIS on that number and activate it on another?

  This seems unnecessary, but may be the only solution?

  Hi all, the problem was solved today by a brilliant person who found the AFN is not correctly set up - after so! many technical support confirms that it was fine.  I guess it may have as some misspellings that are so obvious, you can just find them. After more than a month, I'm just relievd and grateful!

• My internal Webcam does not work (Windows 8 / PB Easynote) * help *.

  I have a TE Packard Bell's Easynote running on Windows 8. It has built in webcam (a generic unit named WeCam HD). But right out of the box, whenever I run an application that needs to use the webcam, it says "no device detected Webcam. If you are using a built-in camera please turn on"or other similar term. There is absolutely nothing in the user guide/documentation to explain how to do this.

  I went a little further and checked the Device Manager and there are the most recent drivers for this device all present and correct. And in some ways to make worse it, most of the time it doesn't work and it just worked last week. My son took a load of pictures of himself using the webcam internal to give me a new nice screen saver (red led light has been released top the camera was on and work) so I know that he has the opportunity to work. It's not fair. We tried to retrace his steps I guess all that I need is a key command to move the camera power switch (there is no way to access the device that I can find in windows 8). I tried fn & the keys function, Alt or Alt GR and the function keys, the windows key and all the keyboard shortcuts I know, but nothing seems to work. Please is - can someone help or give advice. It drives me crazy

  I think that I finally discovered it. Well, it seems to be correct.

  When you launch the video camera app or app camera for the first time as long as the laptop screen is far enough back the laptop recognizes the webcam and it turns on automatically,

  If you run the application with the screen in an 'L' (side view), then it does not work, it does not recognize the webcam. But if tilt you the screen a bit more far back it seems to work.

  Crazy. But maybe theres an internal sensor or something. Well now worked two times...

  unless it's just a loss connection internal as Douglas says. I'll just keep my fingers crossed that this new crazy method continues to work. If that's all, that's when I'll eat my hat. I've seriously been pulling my hair out over this. Looking at / installation of hardware drivers. Research and try millions of combinations of different keys. Trawling through information about Windows 8 & webcams. And it turns out that, if all goes well, it's just something simple like this...

  But thanks for your colleagues at the time. Appreciated.