Total part-time, how? 30%

Similar Questions

• Total connection time how to account with GANYMEDE.

  Hi, we have the following scenario, this company uses two methods for remote access (for employees only): through RAS connections, or by using VPN clients to connect to a 535 PIX over the Internet. We need to do accounting for the total connection time, in the case of RAS connections is easy, we run AAA GANYMEDE + between the RA and the ACS (ver 2.1) and check the start/end time. But with the Internet connection start/stop time reflects the total time for each connection by user i.e. telnet, snmp, ftp, etc. but what connections can be simultaneous (or not), so we can not just add every time total of connections to a single user, it could be greater than the actual time that this user has been really connected. So how could account us for in this case total connection time?

  Thanks in advance for your recommendations

  Unfortunately you don't have. Accounting for users in the PIX VPN is on the Board to design for some time now, but so far has not been implemented. You can check the status on bug ID CSCdu01327 for other updates.

• Total part-time on the Group of

  Hi friends,

  IM in OBIEE 11.1.1.7. I have a report with the columns as below

  

  If you can see @ 419 above is my employee no one who has two records for one of the column for 26116.93 and 0.00 for itself and the child. I want to display another column separately, with a sum total of 26116.93 + 0.00. As I need this other column that calculates the sum of (26116.93 + 0.00) according to the wise number (Group of).

  Is it possible to achieve this scenario.

  Thanks in advance.

  Kind regards

  Saro

  Hello Saro,

  It will be sufficient for your requirments, if you please, in the agreggation rule (total line) make sure that the drop-down list with option "sum" is selected.

  

  This gives the sum of

  

  And to ensure, in white

  

• Total part-time help

  No chance that someone might be able to help me develop a subtotal button which, when you click gives subtotals for each column of the table in the subform of the activity of the attachment?

  You will need to give a name to each cell of the table... I appointed to every cell of the wages column salary. This allows me to use FormCalc expression that will refer to the element of multiple Rows.salaries. Look at the line of code on the Total field in respect of wages. I'll leave to you to do the rest.

  Paul

• You don't you E-Print to work? Feel the air works part-time?

  Unable to get printer code? Printer keeps asking for the proxy server and proxy port. What are they and how to find them.

  My impression of air works part-time. How to fix it. (I closed made printer etc. - it solves the problem for a time of shooting)

  Hi rprasuhn,

  Thanks for the reply.  Try the following steps.

  I would first disconnect the router and the printer for about 1 minute. I would plug the router first then the printer. I would then try to enable web services. If not successful, and you get the same error message. I'd follow these steps.

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select Network (IP) address

  6. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply you could get a fair warning select OK.

  Let me know how it goes.

• Question about the accuracy of the Total remaining time for battery in Power Meter

  Mr President.

  I checked several laptops that are of the same model, one of them cannot display "Total time remaining" in the power meter. Even other laptops may display, but the values are equivocal. Sometimes the 'remaining power' is 80%, but 'Total remaining time' is 1H20Mins. And sometimes, the "remaining power 'is 75% ', but"the Total remaining time"is 1H30Mins.

  How Windows calculates the 'Total remaining time? I found what OS will have one or two minutes to display "Total remaining time" after I have the power cable plug-out.

  Which is appreciate to get your answer.

  Horky

  The remaining computing power comes from the numere questioning power management drivers and is a fairly complex calculation based on current usage (the amount of energy is consumed), the capacity of the battery (what total capacity is left and how fully charged is battery) and can also vary depending on what else is plugged into the USB port of the computer , what accessories (memory, video card, etc.) are installed, how good or bad, the battery is to maintain a charge and so on.  There is no particular reason to believe that maybe outside the right-out-of-the-box everything two laptops will show the same calculation even if they are all the same brand and model.

  "Horky.Chen" wrote in the new message: * e-mail address is removed from the privacy... *

  Mr President.

  I checked several laptops that are of the same model, one of them cannot display "Total time remaining" in the power meter. Even other laptops may display, but the values are equivocal. Sometimes the 'remaining power' is 80%, but 'Total remaining time' is 1H20Mins. And sometimes, the "remaining power 'is 75% ', but"the Total remaining time"is 1H30Mins.

  How Windows calculates the 'Total remaining time? I found what OS will have one or two minutes to display "Total remaining time" after I have the power cable plug-out.

  Which is appreciate to get your answer.

  Horky

• Lead story total visit time?

  Hi all

  Is it possible to mark a contact based on the site total visit time?

  I didn't see any relevant conditions filter in the filters of contact. Is there another way?

  Thank you

  Rama

  Rama,.

  Technically, you could.  There are two ways that you could do in E9.

  (1) If you really want to do it through a filter, it would be pushing the data in the "Total" field to a custom Contact field, the profile of the field, then you can use a contact filter.

  (2) as this will be used for lead scoring with the program generator, you can create a Condition based on the "Total time" profile field or even a Segment (if there is considered desired compound variables) then use the Condition or the Segment of your decision rule to determine the way to score.

  Option 2 does not make you give up a contact field, which might be better. You learn how to do both of these tactics in the profiling Web course.

  Let me know if it works for you.

  Amma

• Try to restore my iPhone and I get the message "Cannot restore iPhone because an unknown error (50)." I got this message several times, how to fix?

  Try to restore my iPhone and I get the message "Cannot restore iPhone because an unknown error (50)." I can't chat because the phone is locked and I can not access my serial number. I got this message several times, how to fix?

  Have you already checked this discussion about this?

  The iPhone cannot be synced. An unknown error occurred (-50)

• I have disabled my iPhone s4 because I type in my password PIN for several times how I unlock now?

  I have disabled my iPhone s4 because I type in my password PIN for several times how I unlock now?

  Follow the instructions in this article to support that best apply to your situation:

  iOS: device disabled

  Good luck

  GB

• I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?

  I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  When the iPhone is connected and Photos opens, select iPhone in sideba of the windowr of Photos. Then, uncheck the option 'Open for this iPhone Photos' below the toolbar.  Do this for all your iPhones. The hook should be unmarked for each device individually.

• When I start the computer, my computer opens with a music (sound) very short and when I stopped, it closes with a short, loud music, causing disturbances to third parties. How to remove this noise?

  When I start the computer, my computer opens with a music (sound) very short and when I stopped, it closes with a short, loud music, causing disturbances to third parties. How to remove this noise?

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Step 1: Search for the issue in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. Click Start and then click Run.
  b. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.
  d. When you are prompted, click on restart to restart the computer.

  Step 2: Change or disable startup Windows and exit Windows sound and check.

  a. click Start, click Run, type mmsys.cpland then click OK.
  b. click the sounds tab.
  c. under program events, click Start.
  d. in the sounds box, click (none), or different sound, and then click OK.
  e. click exit Windows.
  f. in the sounds box, click (none), or different sound, and then click OK.

• Enter F1 & G1 or M1 (G1 is added & H1 is subtracted) total in I1 - how?

  Enter the value in F1 and G1 or M1 (G1 is added & H1 is subtracted), total in I1 - how?

  Your question is almost certainly better asked in the forum Office.

• Part-time student

  Hello

  I am looking to buy creative cloud. As a part-time student I would still be eligible for the student kit?

  Thank you.

  no doubt, student software discounts, eligibility student | Adobe

• Please explain these things in real time, how we will use and how it will effect

  Hi all

  Please explain these things in real time, how we will use and how it will effect

  Types of validation:

  • Depending on
  • Independent
  • None
  • Pair
  • Special
  • Table

  types of lists?
  
  

  Types of lists are:

  • List of values
  • Long list of values
  • List of POPs

  This help-

  Select a Validation Type for your entire value (user, administrator system and using Flexfields)

• total run time based on sql id?

  Hello

  I wrote under query to find out the total run time sql and total executions happened based on sql id for each date. Can you get it someone please let me know if the output below is correct?

  SQL> SELECT
    trunc(begin_interval_time, 'DD'),
    ROUND(sum(elapsed_time_delta)/1000000) "Total Execution Time (sec)",
    ROUND(sum(executions_delta)) "Total Execution"
    FROM dba_hist_sqlstat a
    JOIN dba_hist_snapshot b
    ON a.snap_id = b.snap_id
    WHERE sql_id        = '8acg09uq48jzk'
    AND executions_delta>0
    GROUP BY trunc(begin_interval_time, 'DD')
    ORDER by trunc(begin_interval_time, 'DD') DESC;
  
  
  TRUNC(BEG Total Execution Time (sec) Total Execution
  --------- -------------------------- ---------------
  01-AUG-14                        160          122078
  31-JUL-14                       9309         1822147
  30-JUL-14                       6667         1845014
  29-JUL-14                       6196         1873091
  28-JUL-14                     277268         1517005
  27-JUL-14                      78546          794048
  26-JUL-14                       1359         1166650
  25-JUL-14                       7665         1826915
  24-JUL-14                       6786         1907862
  23-JUL-14                       8132         2019695
  22-JUL-14                       6611         1948861
  
  
  TRUNC(BEG Total Execution Time (sec) Total Execution
  --------- -------------------------- ---------------
  21-JUL-14                       7980         2948449
  20-JUL-14                       3226         3554316
  19-JUL-14                       3405         3222148
  18-JUL-14                      10179         2478602
  17-JUL-14                       7950         1972643
  16-JUL-14                       8465         2054012
  15-JUL-14                       8483         2248688
  14-JUL-14                       8644         2243460
  13-JUL-14                        942         1478516
  12-JUL-14                        985         1075398
  
  
  

  Generate AWR report during the period of interest and you will get more information.

  Apart from that, what problem you ar trying to solve. Please explain that

  You can also use the following, because you are looking for particular sql

  awrsqrpt. SQL > for individual ssql

  awrsqrpti. SQL > for sql on a particular instance... (useful in case of CARS)

  Kind regards

  Harman