Total system failure

Similar Questions

• Windows Vista - total system restore how

  Computer my son is an e-machine with windows vista. Of course, he tried to download a program to a xbov by accident and then tried to delete. I can not find the program on his pc, but since then, the pc will start and while navagating the pc will be closed and restart and keep trying to navigate. I would like to do a total system restore, but I can't find how to do it on windows vista. I'm too used to my windows xp. Help, please. Thank you...

  p.s. If I do that it will try to stop and then restart again on me? If yes what is the best method on how to do... I don't have disk they all inside the pc.

  Hello
   
  
  1. is only a problem when running a particular program?
  2. could you give us the exact name of the program that you have installed?
   
  You can check if this program is listed in the program and you can remove this program from there.
   
  First of all, you must disable the auto reboot system error and then we can check whether or not the problem is in the clean boot state.
   
  Method 1.
  Step 1. Disable automatic reboot to avoid unwanted restarts on system failure.
  a. when your computer starts up keep press F8 on your keyboard until you get the Advanced Boot Options screen.
  b. now, use the arrow keys, select Disable automatic restart in case of system error and press ENTER.
   
  Step 2 Start the computer in a clean boot state and check.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  Method 2.
  Type eventvwr.msc/s in the address bar.
  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

  For more information on event viewer, see the articles below:
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  If you want to restore the computer to factory settings, you can contact the manufacturer of the computer.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• C6180 ink SYSTEM FAILURE error message

  IF ANYONE CAN HELP WITH THIS ERROR MESSAGE?  FAILURE of the SYSTEM of INK 0xc19a0035

  I HAVE A C6180 ALL IN ONE.               IT DOES NOT RECOGNIZE THE FACT

  THAT I HAD REPLACED A CARTRIDGE A MONTH AGO... HP brand AND NOW GET this MESSAGE.

  I RE-SET, CLEANED ALL THE CARTRIDGES AND TALKED WITH HP ON THE PHONE 2 X.   IT WORKS AGAIN FOR A SHORT PERIOD, THEN THE INK SYSTEM FAILURE ERROR APPEARS AGAIN.

  HP said I need a new?   It worked very well until this and always does this for awhile after you reset it, so can't understand

  Why should I go out and get a new one for this problem.  I hope someone can help!    Thank you!

  IS NOT THAT DEMAND THE DAY 'EXPERT' OF AID?  HAVEN'T HEARD ANYTHING YET!

  This same error started on my printer and eventually it would power on and off constantly. Apparently some defective components were used in the construction of the logic board (see photo). My C6180 there were 3 defective capacitors (the Green cylinders - breathtaking top indicates failure) and a 4th from the same manufacturer (TEAPO - many web references unfavourable to this manufacturer). I bought 3 x 330uF 16V and 1 x 680uF 10v rated at 105 degrees Celsius (total about 60cents). On the logic board, the capacitors I replaced are labeled C613, C614, C660 and C662. If you are not comfortable replacing components yourself (or is not a soldering tool), you will need to find someone who will. The repair time should be less than 30 min - I did it in 25 minutes with only a solder pen. This also fixed the ink the printer was to have system failures. A similar fix may apply to other printers.

  

• 0xc19a0023 of Photosmart ink system failure

  I have a photosmart C6380 All - In - one printer which has an error message on that says "ink system failure, 0xc19a0023 please turn printer market."  Followed all directions under the heading contact hp as turning point on and outside, by unplugging all the cords, clean the electrical contacts, etc..  Bought in 3/09, so out of warranty.  Called Hp and has spent 37 minutes on the line with them, trying to sell me a new printer without ever discussing the problem with someone difficult to understand.  Was willing to pay $20 for 14 days tech support but kept making pressure to pay $37.for 1 year of technical support.    We know what means this code and how to fix it?  Have never had any other problems with the printer and still use the correct HP with her ink cartridges. Have windows Vista on my computer.  Thank you!

  Usually with a message like that, we recommend you first disconnected the USB cable if it is connected to a computer. Then remove the cartridges from the printer as well. With the always on power, unplug the power cord at the back of the printer, as well as the wall, and then wait for about 60 seconds. After that, plug it to the wall first, then the printer, allowing it to start.

  If it gives you a message similar to "the following ink cartridges appear to be missing or corrupt" you can reinstall them at this time, when you are prompted.

  (If you do not have a keyboard, then you won't be able to do the 2 steps. Please see below.)

  If you get the error message even if you have a numeric keypad on the printer, proceed in the same way, but before plugging it back in, press and hold the button # with the number 3 and plug the power cord into the printer and now the buttons. Once the printer starts to show he'll be back to the top, you can release the buttons and allow him to return to the top.

  If you continue to get the message, then do the same thing except hold # and number 6 on the keypad and it allow to return to the top.

  If you still get the message after all the steps above are performed, please contact HP for a replacement, if your printer is still under warranty. If the printer is out of warranty, then we have still generally upgrade options available, and you may be able to get a replacement printer (yet a different or better model) cheaper to go buy a new one. It is usually a good idea to call to see what your options may be at this time for this on phone support options. Beyond what I posted, it is not a lot of telephone support can do for you, so, in my opinion, I would try to focus on the upgrade options.

• Ink system failure Officejet 6500 (no error code specified)

  Ink system failure Officejet 6500 (no error code specified)

  I have turned off the machine on again (and it doesn't)

  I turned off the computer and unplug the unit (and it does not fix it)

  Without specific error code I'm not sure what to do

  Hi CHCA. Your Officejet 6500 must be out of warranty? You can doublecheck the warranty status of your printer here: http://h10025.www1.hp.com/ewfrf/wc/weInput?cc=ie & lc = on -if it is still under warranty, you should not pay for a new printheaad.

  But if your printer is no longer under warranty, you buy one a. The part that you really need to order an Officejet 6500, is CN643A. If you are in the United States, here are the HP part store page where you can order the new print head Assembly: http://h20141.www2.hp.com/HPPARTS/Search_Results.aspx?mscssid=C580393F30964EDD82B16A5C641BEC41 & Searchin' PartNumber = & SearchPN = CN643A

  If you are not in the United States, start from this page: http://welcome.hp.com/country/us/en/wwhowtobuy.html , specify your country and search for CN643A.

  Also, here is a support document that should help you with the replacement of the print head: http://support.hp.com/us-en/document/c01643079

  I work with HP but my messages and responses are mine.

• Printer ink system failure message all-in-one HP 6180

  I can't print because of the error message following on my all-in-one HP 6180 printer screen:

  Ink system failure. Refer to the documentation of the printer Oxc18a0201. I followed all the recommendations on documentation of the printer, such as: installation later HP updates, turn off the printer and remove the power cord, remove all the ink cartridges and then putting back in when prompted. Also, I rebooted my computer. None of these recommendations have worked. I need help! Thank you.

  Hello Kah524,

  I met your questions and we have a solution for this and you can try it, but that would apply only on starting with '0xC18A' and not '0xc19a error codes.

  Try the following steps for Photosmart C7280:

  A. - Press and hold the "*" key.

  B. - Press the "#" and release both buttons.

  Display should say "enter special key Combo".

  C. - Press and release in sequence the buttons '1', '2' and '3 '.

  Display should say "Support" and display the FW rev (something like R0631R)

  Press and release the right arrow button until the display shows "Menu of the System Configuration'.

  Press and release the OK"" button.

  Display should say "hardware failure status. If it isn't there already, arrow above for "Hardware failure status"

  Press and release the OK"" button.

  Display should say "hardware failure status: clear." Press OK to erase.

  Press and release the OK"" button. Message becomes "hardware failure (breakdowns) resolved state. Press Cancel to continue.

  Press and release the "CANCEL" button as many times as necessary, so that, either the "Welcome to Photosmart Express" screen appears, or, the 'ink system failure' is displayed. DON'T TRY TO PRINT AT THIS STAGE.

  Using the power button, turn the power off and unplug the power cable from the back of the printer output and the wall.

  Wait 30 seconds for the power to get discharged and then plug the power cable into the wall outlet first, and then to the back of the printer

  Switch on the device. The printer may display message "USE POWER BUTTON CLOSING the PRINTER" followed by "Press OK TO CONTINUE". Press OK.

  If the printer has already initialized, then go to the next step. If this isn't the case, the printer will start the "ONE TIME INK initialization PROCESS". Allow this process to do and not to interrupt. Once the initialization is completed, the printer print a Diagnostic page.

  To check, features of the printer print a PAGE of TEST car. If SELF TEST prints, then printer is ready for use or installation of the software.

  If the error is still there, or reoccurs replace the unit.

  --------------------------------------------------​---

  0XC19a error messages, the printer can be retrieved.

  Good luck and if that fixes the problem please click on Bravo...

  ---------------------------------

  Although I am an employee of HP, I speak for me.

• 0xc19a0020 ink system failure error message

  Hello

  I have a HP Photosmart Plus, product # CN216, model # B210a. I'm running Mac OS X 10.7.5

  Today, I turned on my printer and got the error message "ink system failure 0xc19a0020 please turn printer Off and then on.

  So I did, but still got the error. So, I did the troubleshooting, which told me how to clean the print head. I've done 3 times, but I still get the error. I unplugged the power cord from the printer, then the wall, waited, then reconnected. I still get the error.

  I use the printer at least once a week, so he hasn't been sitting unused for too long.  I have not changed anything or whatever installed lately. The ink cartridges have ink.

  Anything else I can try? The replacement print head is $72!

  Thank you!

  Sorry, but generally, this can be a bad head of printing or bad cartridges. Here is a link that will help you with this problem, even if you did most of these steps.

  http://support.HP.com/us-en/document/c03081973

  If you have already replaced the front print heads and you return to this same stage, it would be a bad printer and maintenance needs.

• HP Officejet 6600 e-all-in-one printer - H711a/H711g 'Ink system failure', will not print computer

  At first, it was just a problem with do not print from the computer.  Error messages had to do with the failure of the print head or do not find print head, etc..  After going through several different controls online, download the scans, etc., it does not at all, print showing an error message "ink system failure".  I tried to remove and reinsert the 4 printheads (black 932, 933 colors) and turning market and check the caps and unplug the power.  Since this is a wireless network, I can't unplug the USB.  It was the OK signal.  Now, with this error message, I don't see the home screen printer controls.  It just says: put it on and then contact HP.  Help, please.  Very frustrated (it didn't happen all at once - a first he wouldn't print from the computer sometimes, other times.)

  Wildrat58,

  If you get ink system failure and you've been through the steps that are listed in the article above the printer may require troubleshooting. You can reach support - 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number. http://www.hp.com/cgi-bin/hpsupport/index.pl - for the maintenance options.

  Good luck!

• Ink system failure error Code 0xc19a0013 HP Officejet 6500 has

  Printer has stopped printing in black ink: get a gray tone or no impression.  Get higher up the ink system failure error.

  Reviewed the help pages and have installed new black ink cartridge, check the squares of all the cartridges, clean the print head menu Tools, removed the print head and cleaned manually, unplug the power supply etc. Considered the responses on the forum pages. A ran HP print and Scan doctor.  I consider when buying a new print head or a new printer, any other suggestions? It's only black ink.  I ran a test page and the black box of the ink is interesting: instead of going from the darkest to the lightest he's going from light to dark to light again.  Thank you, Sue S.-S.

  You're welcome Sue

  See post below on Bob soak the printhead...

  http://h30434.www3.HP.com/T5/other-printing-questions/Photosmart-premium-C309a-black-prints-out-green-on-photo-paper/m-p/449245/highlight/true#M28673

  (1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
  (2) remove all ink cartridges, then remove the print head Assembly.
  (3) gently put the printhead nozzles down in water and soak for 5 minutes.
  (4) remove the print head and gently dry the electrical contacts.
  (5) replace the print head in the printer and then reinstall the ink cartridges.

• The system failure error 0xc18a0206 for HP Photosmart c6180 all-in-one of the ink...

  Printer has not been used for a few months... Troubleshooting restart did not work... Warranty has expired and I need to print an urgent... Help, please!

  Go here and follow the instructions:

  http://www.CCL-La.com/blog/index.php/HP-Photosmart-ink-system-failure-1

  Worked for me!

  {deleted content}

  -pojjl

• Photosmart C7280 All in One Printer, Error Message - ink system failure

  Hi, I have above named printer with an ink system 0xc18a0406 failure Error Message.

  The Printerhead cannot be taken out for cleaning, because there is no leverage. Please can you help me?

  Thank you, Cynthia

  This might help you:

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/do-you-have-an-ink-system-failure-0xC-error-message/TD-p/740567

• CN255C: System failure ink 0xc19a0003

  Hello!
  I have Photosmart В010b.
  Recently, the control panel displays an error "failed ink system 0xc19a0003.". Turn off and turn on the printer.
  Print and copy, it became impossible. Scanner works.
  I finished all the actions recommended on the HP site, but the error has not been corrected.
  I have read the HP site regarding the guarantee of the ink cartridge. I rarely print. Cartridges were manufactured in 2012.
  Let me know what needs to be done to the printer has worked.
  Good day!

  Hello @Konstas,

  Welcome to the forums of HP.

  I understand that your Photosmart B010b gives you an ink system failure message.

  I would like to help.

  You've probably gone through the following document.

  ""Problem with print head,""printer failure,"'Ink system failure,' or a ' 0 x ' r a 'C2 '.... "Displays Error Message

  If you have cleaned the print head and everything done in this document:

  ' Error code ' 0xC19A0003.

  Then the printhead needs to be replaced.

  In addition, most ink cartridges have an expiration of 2 years/best before the date.

  Your problem may be with the old ink cartridges.

  What is ink expiration and it will make my HP ink supplies stop working?

  Limited warranty for HP ink cartridges and print heads replaceable by the customer of consumables HP inkjet

• C309a 0xc19a0042 ink system failure

  Hello.  Problems with my printer.  The guide of the print head runs on somehow got loose.  I solved this problem.  Then when I turned the printer back on, I got the message that I had a printer head problem.  Follow these steps to remove the cartridges, print heads, then replace them.  Printer turned on and since the time ' have 0xc19a0042 ink system failure.  Have printer or off the power several times as suggested. Still nothing.  Did a hard reset according to the other solutions, still nothing.  Help!

  Hi mommahoos,

  Follow the steps outlined in the document below. If you still continue to have problems please let me know.

  An alphanumeric Code (example: ' 0 x 'r' C2...) ") or 'Ink system failure' Error Message is displayed on the front panel when printing

• C8180 ink system failure

  Hi guys,.

  I'll keep this short because I know that many have the same problem.

  My C8180 is to give the dreaded ink system failure message.

  Lots of error: "ink system has failed.  Cannot print.  Refer to the printer documentation.  Error: 0xc18a0001.  "Stop the power, then on again.

  If I reset the State of the equipment via the secret menu, I am able to print an absolutely perfectly.

  After you print it automatically makes a clean head thing (all noises) and used then print again (attempt to next print gives the above error).

  If I reset again - I can print once very well (a copy color with lots of colors, a self-test or a print menu alignment).

  He is 2 years old, so out of warranty, but I am furious that HP support tell me to throw it in the Trash because the print head is not replaceable!

  I tried to replace all ink cartridges too.

  Help, please!

  Thank you

  Matt

  Scratch that... I FIXED IT!

  Here is my solution which I hope will help others.

  OK because the printer is capable of printing a fine print after hardware reset (via the secret menu), I found that the print head was indeed works very well.  It is only when he has tried to clean itself that it developed the 'problem '.

  So, I've had printed one... but it's a Word document, FULL of colors (just a whole page of colored blocks).  I printed in high quality to use more ink.

  This seems to have cleaned the heads by running a lot of ink through.  The next time he tried to clean it does not error.

  I know, I should work for HP :-D

  Good luck out there, there is hope.

  Matt

• Maintains C7280 ink system failure 0xc19a0035 error... Help!

  Hello, I've owned this printer c7280 for three years. Lately, my printer has received periodic errors preventing any impression until I have shut down and restart. The error message reads:

  Ink system has failed. Cannot copy, receive faxes or print. Refer to the printer documentation.

  Error: 0xc19a0035

  Stop the power, then on again.

  When I reboot, printers works fine for anywhere between a few minutes to an hour before this same message back to the top. Sometimes, when the printer is not used at all, it suddenly shows error message. The moment that I think is random. Other times, when I try to print from my computer, the error message appears on the printer. I am still able to print pages, but I have to restart the printer if the error appears.

  How can I fix it? Any help will be greatly appreciated!

  Here is a link that will help you on "ink system failure".
  http://goo.GL/V2qlP