Touch 8, a bug or just a failure of the device?

Similar Questions

• stream HP: touch pad work usually also do not show in the device

  Ive tried troubleshooting devices it finds several film and a cpl that the system could not find the driver, don't know what to do next?

  SOLVED! Need to go to the Update Center feature and update pci2 contoller, although new Thank YOU MICROSOFT! HP NO. HELP AT ALL!

• BlackBerry Smartphones failure of the device to connect to the server

  I turned off after a very eventful period data services, required a total break. Now, I turned on it again, but still can not send/receive emails, going online, etc.

  Get a message "your device had a problem connecting to the server" when I go into settings initialization emails.

  Please help, getting desperate...

  Hello!

  You can try the following:

  Remove your battery and re insert in order to restart.

  I hope that solves your problem!

  If your problem has been resolved then would you be asked to click 'Like' and accept as a 'Solution' that other advisors invest it times on this Message more.

  Thank you.

• Why my ipod touch 5 turn on she used that happened last night I went on netflix for like 20 minutes then I closed it and then I'm gone on it again 5 minutes later, he worked later I hung on it and then I just wanted to check the time and it dint work

  I went to netflix for like 20 minutes, and then I closed and then I'm gone on it again 5 minutes later, he worked later I hung up it and then I just wanted to check the time and it dint work I can't see the screen I have tried pressing the home button and the stopcock one its does not work how to fix it

  Try:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• Captivate 7: entry boxes not showing captions failure when the bad input.

  Hello.  I'm under Captivate 7.0.1.237 on a PC with IE 9 as my default browser.

  Something has changed in the text entry areas (TEBs) and the way that they validate.  It was think I would enter several options validation of the user and, if the user didn't enter one of the correct entries in the BER my failure message would come by telling them what to enter.

  This is not the case, instead, when I have to go to the next slide BER, the project advances to the next slide if they have input a correct answer or not.  I can type any kind of junk in BER and I get no legend of failure.

  At this point, I change my TEBs for the following parameters have experimented and added a box to click with the shortcut tab (because that's how the application that I am a teacher moves a field to) the value, but the problem still occurred. Earlier in the project, I had shortcuts to my TEBs defined in the tab, but that's when I noticed the problem:

  

  

  

  I only put my BER close to the top of my calendar because I had problems with the click boxes do not display failure messages when they were farther down in the timeline panel.  They are now on top.

  Thank you!

  Michele

  Ah... so Captivate is a large junk covered oak desk.  Well, that explains why I never find anything in Captivate 8!  I bet it's got drawers full of "features" hidden and bugs are just woodworm.

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.

• Interesting solution of failure of the fans occasionally cold start?

  Interesting solution of failure of the fans occasionally cold start?

  Normally I do a reset of the SMC, sometimes it's the solution.

  When kick cooling fans as soon as I start my cold iMac, I just quickly swivel the iMac slowly from right to left and the cooling fans have stopped.

  Strange?

  All the answers?

  Note: I use an iMac 21 inch end 2013-2, 7 GHz Intel Core i5

  Thank you in advance for the answers.

  This sounds like a sensor loose or pinched wire.

  You may be able to see the problem of sensor or sensor wire with the diagnosis of Apple to test or a third party temp. followed by the application, but the best would be to book a service appointment at your local CENTRE.

  Apple Diagnostics using - Apple Support

  https://locate.Apple.com/

• Failure of the audit on the iPhone, but works in iTunes

  Hello

  I had a strange problem:

  I can log on successfully to my desktop (Windows) by using my AppleID, can see my account balance and buy free apps.

  But I use the same AppleID on my iPhone 6Plus, it always shows: "failure of the audit, your Apple ID or password is incorrect."

  can anyone help?

  Thank you very much.

  Hi all

  After 2 hours of research and new attempts, I finally solved this problem.

  1. just to keep a new attempt on the iPhone, until the account is locked.

  (Note, only the account on the iPhone is locked, can I still use iTunes Windows and web to connect on the same Apple ID]

  2. then follow the instructions on the screen to unlock the account.

  (you will be asked 2 secret questions when the account is set up a few years ago)...

  Once the reset is OK, the same account is included to connect the iPhone and buy apps.  (Yes..!)

  Hope this will be useful.

  kpang1

• last update on iPOD erased or modified way that I used to have a playlist and songs. I don't want iRADIO that I need my songs on iPOD. am retired w / limited $$$ and I just want to enjoy the music as it appears on the iPOD. Sync failed

  Please tell me how to cancel the last iPOD update mess that I did on 13 Feb 16. I no longer see playlist or my 1008 songs I have on iTUNES. now I see just short list of songs that I have and it seems that if I hit these songs there is a charge next to this very short list! I have 10 windows & had enough probs with windows update & now have the same disorder after the last update for iPOD! am desperate for advice! am retired w / limited $$$ & I just want to enjoy the music, I've already paid for the iPOD. Thank God I did not alter the songs on iTUNES! Please help am desperate

  It is an iPod touch?  It is said ' iOS 6 ' in your profile information.  What is the updated version?  If not, what version you have currently installed.

  I don't know what "iRADIO" is...  Are you referring to the Apple Music music streaming service?

• The name of the library in the General preferences are the same as the name of the device on the iPod touch?

  The library name in general preferences in I Tunes be the same as the name of the device in settings > on > on iPod touch 5?

  Hi chaz80,

  You can name the default iTunes library all you want.  Most people use their name, for example "library Chaz" not the name of their device.  It is common to name a playlist "Chaz iPod touch 5" and put just the songs you want to sync to your iPod touch in the playlist.  How do you organize things is completely up to you.    The resources below will explain more in detail:

  11 iTunes for Windows: using multiple iTunes libraries

  Enjoy!

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• W510: How do I access my data from a failed hard drive after the failure of the motherboard

  I made a mistake and has paid for major .

  This error pouring a drink sweet on my laptop. I know, I know, my keyboard can and protect against damage caused by the spill, but it was a drink together. In any case, I panicked and shut down the system and it has upset and removed the keyboard. And be the impatient person that I am, I made what was probably the ultimate error. I do not give everything save a sufficient amount of time to dry and I tried to boot the system. There is my computer. Or at least I think.

  Symptoms: It began at the start, kept a beep, sometime just close and will start.

  In any case, I guess that my laptop went kaput. Now to the point of this thread. I had not been a recent backup and can't remember when the last backup was actually made. Assuming that my hard drive is ok, I want to get all my data, so I saw several options:

  -Send the system to a data recovery service where I will not pay less than $300, but probably 2 to 3 times what

  -buy an equivalent model laptop and put the HARD drive in there

  -by an external SATA hard drive enclosure and mount it via USB on another computer

  I bought a box external and assembled this evening. I had read about the data access of difficulty with a system non-Lenovo because of encryption of the data. I proved that by linking it to my work (a Dell) laptop and I couldn't access my data directories. If I have access to an another Lenovo Thinkpad, I'll be able to access the data if connected via USB? I had read that I can access the contents of disc hard if it is connected to an another Thinkpad, but I knew not that if it means that I have it connected via SATA connection or if there is work through the USB port.

  I'll appreciate any suggestions for accessing my data.

  Best regards!

  All,

  Thanks for the suggestions.

  I was able to recover my computer and all data on it.

  Just to describe what I have done, here are the details.

  Because of my concern about a failure of the motherboard, I bought a used/given new keyboard and an external SATA drive enclosure. I was not able to properly take possession of the car from my other laptop, but I was able to access the data in Mode without failure. With my data, I plugged the hard drive and the new keyboard in and started without problem.

  Thanks again,

  brent86

• Delivery failure in the form of synchronization?

  Do not use wifi sync that my network is hidden and does none of the confure this kind of wifi access, I can say. I had no problem with wired syncing through my mac, but today I can't synchronize my race. On the device, he says prepares fitness data, then the sync report told that he failed. The dialogue on the computer crashes just indefinitely and that when I hit the x here button to cancel the synchronization (after a delay of 10-20 minutes - long after the device shows the exclamation point for synchronization of failure of fitness) desktop software announced that the synchronization failed.

  Help!

  90% of my fitness synchronizations fail, wired or wireless. I have to power cycle before synchronization in order to work. Not a great situation, but at least it works.

• HP6830: Failure of the print queue

  HP replaced my 6830 due to failure of the print head. New printer works proud desktop using Vista. Previuosly I could print from my laptop wireless as well, but it's time the print queue says printing, fails to print and return to errot impression. I know that thw laptop is connected to the printer thr and I even can it ping ipconfig without problem. I have been through software support, and to the low load options hear everything without any result. I am now confused.

  Hi @3391816Sablenip,.

  I read your post and see that the replacement printer is wireless print on the Windows Vista-based computer, but not the laptop running Windows 7. I will definitely do my best to help you.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server.
  Type the IPv4 address in the address bar of your web browser. (Internet Explorer) It to load the page.

  You mentioned that you can test the printer, just to check a real contact, check the network IPv4 address on the computer to see if the first 3 sets of numbers match the IPv4 of the printer address.

  Press the Windows and R key at the same time, to show the command line run, type cmd, then type Ipconfig.
  Check the IPv4 address.
  Now, check the IPv4 address for the printer.
  If this isn't the case, then the printer and the computer are not on the same network.

  Do the first 3 sets of numbers match?

  Check the address IPv4 of the computer to verify that it matches the IPv4 of the printer address.
  Printers and devices, right click on the printer, on the left, click printer properties, select the Ports tab, click on Configure Port.
  If they do not match and then close the window configure the Port and click on create a port and follow the instructions in the wizard.

  Type the IPv4 address.
  Make sure the printer is online.

  Test the printer. If creating the new port doesn't work, run the Add Printer Wizard.

  If you're still having problems, download and run the print and Scan Doctor, he will diagnose the problem and could solve it automatically.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If the problem persists, try the following steps to see if it will be useful. HP printers - print jobs stuck in the print queue (Windows).

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• Lost in My Documents after the failure of the system files

  I have a (~ 6 years old), Dell Precision Workstation 360 serice XP Pro pack 3. This morning when I got up the screens show vertical bands of color. Given zero has nothing - not even the selection screen or function key boot options to enter the bios Setup. In brief - not even a partial boot - just (double) monitors show the vertical lines of color. Encryption on the motherboard could have found death I took the C: drive and plugged into one another computer (XP) via one box drive external usb. In windows Explorer I can see just about everything that I expect to see on the drive except in the My Documents folder. I don't know what should be there, but the only in My Documents is the music of my pictures of my user name and user name. The only items in these folders are the XP sample music files and images. I did a search on the entire disk for a couple of files that I know should be in My Documents, but nothing was found. Since then, I ran a virus scan using Norton Internet Security, but he found no virus. I've got some critical files on this disc I need today. Stupid me - had not saved them in a few weeks, so a lot of work is missing.

  Any assistance to resolve this would be greatly appreciated.

  Warren

  It seems that there are file system corruption, after the failure of your hardware. Try some recovery software data (links below) or, if data is critical and expense is not a problem, don't take any chances and send the drive to a professional drive savers data recovery company.

  R - Studio - http://www.r-tt.com/
  Recuva - http://www.piriform.com/recuva
  Restoration - http://www3.telus.net/mikebike/RESTORATION.html MS - MVP - Elephant Boy computers - Don ' t Panic!