touch button wireless and sound

Similar Questions

• Satellite A660 - touch pad / stop and other buttons do not work

  Dear people on this forum,

  Recently, about 3 weeks ago, I turned on my computer and I cleaned out the dust because it was overheating.

  about 2 weeks before, I noticed that my touchpad is not working and the buttons at the top of the page do not work, there is no light (multimedia audio buttons wireless) I can't activate/deactivate or either, I don't know how. I don't know if the problem because I cleaned my laptop and has not logged a few threads back but I included this detail because I do not use these buttons if I haven't noticed if they were on. but he said: 2 days ago, I don't know how my wireless exploded Ant when I press fn + f8 (wireless) wireless communication switch is turned off, which is one of the buttons is not working (upstairs next to / switch even with my touch pad)

  I tried the following:

  Windows Update
  turn off the computer, remove all cables and battery and wait for about 30 minutes. Then then hold down the button for 30 seconds
  Reinstall the support flash cards, hw Setup utility / value pack
  and finally a Toshiba out of the recovery of the box using the recovery of 2 cd product

  I don't know what to do next. It's either:

  try something else
  or is there a wire is connected both touchpad and the buttons at the top and I have to open my laptop and connect them.

  Please answer as to my next step to get my wireless.

  Your dear member of the forums, kaujis

  Post edited by: kaujis

  Please don t get me wrong, but I don t know how to help you now. Disassembly of the laptop is to only authorized persons and if you do it on your own there is always a risk that something may be hurt or may be damaged.

  OK, I must also say that I also removed my machine too but I got lucky and everything is OK as before.
  I put t know how A660 looks inside, but the principle is still the same and I can't imagine you have whatever it is damaged.
  You know very well that we cannot say much about your problem. What you need to do now is the final test of functionality and install original recovery image that you got with your laptop. Test the functionality with the factory settings. If the problem is still there, I m afraid you must open for new laptop and check if everything is connected correctly.

  Last option is to contact the service and ask for help.

• his silence and buttons wireless seems to have been disabled

  I accidentally spilled coffee on my notebook Pavilion dv6 notes and in a frantic attend to mop up the liquid, I must have somehow disabled the silent sound and buttons wireless while wiping the keys.  They worked before the oil spill, but not after.

  Also, as an aside, the left shift key works more so.  It can be bypassed, but it would be nice if the worked.  Any help would be appreciated

  Hey @306hp ,.

  Thank you for visiting the Forums HP's Support and welcome. I read on your HP laptop and get a fix of coffee. Try perform a reset. When you perform a hard reset note remove all USB devices and remove cards memory card reader location. Disconnect all non-essential devices.

  If that doesn't help try to turn on the computer, on which you begin to press F11 repeatedly until the menu opens. You can do a System Restore. System restore allows you to convert any changes that might have happened after the accident.

  I would use q-tips to ear slightly moistened to clean around the stuck key. Coffee gets in it a causes it to stick.

  Hope it will be useful.

  Thank you.

• Pavilion dv6-1140ew: 1140ew button Mute and the wireless button disappeared

  My Mute button and the wireless button disappeared. They are neither orange nor blue, they are not highlighted.

  I did my Lalonde normal and regular cleaning. With the help of the manual I disasembled the phone until I could access the fan/heatsink and clean it with air preasured. After reassembling the laptop, I discovered that the two buttons are not appearing on the cover of the switch. I thought that I must have failed to plug something properly, but after checking twice, I am sure that everything is as it should be. The wireless card works perfectly, so are the speakers. The computer turns on automatically (I'm actually hit him), wifi works perfectly (well, I'm on it) scrolling volume works ok, so media buttons. But everything I try, I cannot get the Mute and buttons wireless to work once more.

  Any help would be welcome.

  PS.

  I tried the hard reset, with deactivation of all sources of power. Does not work.

  Hi @Schanez,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6-1140ew Notebook and the Mute button and the wireless button not working not properly. This package contains the software that enables the quick launch on the keyboard to program buttons. Simply download and install sp46731.exe.

  Please let me know how it goes.

  By clicking on the Thumbs Up below, you can say thank you! .

  Thank you.

• How to change the highlight color, click the button image and text and sound.  are there packages of buttons for use in my project?

  How to change the highlight color, click the button image and text and sound. are there packages of buttons for use in my project?

  Hello

  Even if the point of things based Web links buttons created using them is of simple images. Captivate uses simple images. If you need to put your creative hat and not to let the fact that you see the word 'web' scared you somehow. An image is an image. Use on the web, use Captivate. Same case!

  If you change the properties of the button, you can activate the legend of success. Fix any sound that you like with the legend of success and it will play when you click the button. If you do not want to see the legend of success, delete the text and configure it as transparent.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Photosmart Premium Fax C410a printer and my button 'Wireless' continues to blink

  I created today (USB) replacement printer but the light on the button 'Wireless' continues to blink.  How can I stop it?

  Okay, fine, thank you.  Different printers for different instructions.

  On the front of the printer, go to settings > network > disable wireless (or similar words).  The blue light goes off.

• HP Officejet 6500 Wireless: Print - stream paper and sounds right but nothing on paper.

  Recently the summaries printed and everything was fine.   Replace the ink cartridges and now when we try to print something, the flow of paper into the printer and sounds like its printing but nothing does not appear on paper when it comes out.  When printing e-mail, it will display the title (to, from, subject, etc.), but nothing in the body of the e-mail draws.  I aligned the print heads and cleaned the print heads, but still nothing. Any ideas on what could be the problem?

  After I replied that the attempts did not work, I tried cleaning and aligning the printheads again. This time, it worked like a charm. Thank you very much for your help, you have my sincere gratitude without end.

• Music and sounds of the game won't play; all other sounds work

  I have an iPod 5th generation touch. I checked my volume and the volume of ringtone and leaves. All the sounds are turned on. I checked for if sure speaker working, (it does because the music plays and keypad lock and sounds of device clicks), and I checked in game controllers and all sense I could think of to make sure sounds is enabled. I check everywhere he looks good, but the sounds of the game will not play AGAIN. I'm starting to think that maybe it's a problem of material with my iPod touch 5g because I also have a 6g-key and everything works on it just. Does anyone have any ideas if I could solve this problem?

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

  https://www.Apple.com/retail/Geniusbar/

• Mini 300-050np Pavilion: helmet, always considered as speakers and sound distortions. Where can we change that?

  Hello

  I currently get my Pavilion Mini hooked to a set of headphones Sennheiser wireless and, while I wait for my new speakers, I use the TV speakers that I use as a PC monitor.

  My problem is that on sounds defenitions, there no option to pass a pair of stereo speakers for headphones. The sound is distorted on the low frequencies and I think it has to do with her think that it deals with expernal speakers. I found once taking Realtek Control Panel, but I can't find it now. Don't do me no good when I did as she also would not allow me to tell him that the thing about the Jack conneceted 3.5 are headphones.

  I also have a 'DTS Audio Control Panel' on my tool bar (the thing on the right with the clock button, etc.). I don't know what it is or where it comes from. Is this a HP or Microsoft software?

  Oh, and before ask you... records are up to date on the HP Web page.

  Thank you!

  OK, so to close this debate and for later use.

  -Turn down the volume on the PC.

  -Change the speakers via the DTS audio Panel (it of one thing to HP and seems to replace the windows volume mixer but not vice versa.

  -In speaker properties, output quality seems to want to stay in the middle of quality regarding. Put in high quality you can.

• WIRELESS and wired LAN do not know each other

  My internet provider installed a new cable modem, without capacity WIFI because I have an airport extreme base WIFI (with cable Express extensions).  Speed and quality are OK, wireless and wired, but there seems to be a wall of China between WIFI and wired (LAN): devices that are connected via a cable to my LAN are not visible from the wireless network and vice versa.  Airport extreme is not 'Bridge' mode ("because not of wireless on the new modem capability".)

  No idea of the reasons for this?  Thank you very much

  Sounds like the configuration of the device. With the airport devices it can operate as a device on the network or another firewall as its own network. I think that it is way jumpered to activate, this will allow you to configure the wireless on the airport, but your current router will do the DNS/DHCP and will be a single network.

  Now that you have configured as two routers on an independent network as there is no bridge.

• I forgot my password for my iphone and sound off now is there a way to access my phone without losing everything on it

  I forgot my password for my iphone and sound off now is there a way to access my phone without losing everything on it

  No, it does not exist:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Touch buttons on my Qosmio G50/04j stopped working

  Hello

  I have a small problem that I see is common for new Toshiba laptops, my touch buttons on the top of my keyboard on my laptop stopped working.
  I am slot than Vista Home 64 bit.

  I tried to reinstall the value Toshiba add as suggested in another thread, but that doesn't seem to work.
  I also tried to uninstall Toshiba to re - install (reboot) (Reboot) value without any result.
  Fn keys still work very well.

  I don't know when the problem occurred, I only had the phone for a little over a month and I was installing some software, so obviously something has developed bad there.

  Does anyone else have any other suggestions? Other than reinstalling the OS?

  Thank you

  Holger

  Hello
  Go into the BIOS and check the
  Front control panel
  must be enabled

• digital touch button

  Hello

  We are 2 Apple Watch. and we want to send the stickers and share our heart rate but find Apple Watch digital touch button .my was able to find. but my friend can find me.

  Please help me

  Thank you

  HI - try the following steps, which can also help address other issues:

  • In the Contacts application on your iPhone:
    • Verify that you have set up a contact card for your friend and it contains their iPhone phone number and email address Apple ID.
    • Check that your own contact card contains your phone number iPhone and Apple ID email address.
  • Check that you have added your friend to the friends list on your Apple Watch:
    • On your iPhone, in the application of the Watch: Watch My > friends.
    • To add more friends: friends list > add friend > tap someone in the contacts list.
  • On your iPhone and Apple Watch, remove old iMessage conversations with your friend:
    • iPhone: app Messages > swipe to the left on a message thread > delete.
    • View: Open the Messages app (from the home screen, which is accessible by pressing the digital Crown) > swipe to the left on a message thread > tap on Trash / delete.
  • Set new conversations of Messages from your iPhone phone number:
    • iPhone: settings > Messages > Send and receive > scroll to start new Conversations of > choose your iPhone phone number.
  • Check the email addresses to which you can be reached via iMessage:
    • iPhone: settings > Messages > Send and receive > under you are reachable by iMessage to > allow email address Apple ID (with a scale) (do not enable others who are not only yours).
  • On your iPhone in the app Watch: Watch My > general > reset > press reset sync data:
    • You won't see anything happen after pressing it (the process runs in the background, invisible to the user).
    • Wait a minute or two, so that the data of contacts up to date on your watch.
  • Disable and re-enable iMessage on your iPhone:
    • iPhone > settings > iMessage > enable/disable / enable again.
  • Restart your iPhone and your watch (turn the two together off the coast, then restart your iPhone first):
    • To turn off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off. To restart: press and hold the side button until you see the logo.
  • To send a Digital Touch:
    • Press the side button on your watch > choose your friend (turn the digital Crown and then press the icon or image in the middle of the screen) > tap the digital touch (finger pointing).
    • Send a sketch (drawing on the screen with your finger), a tap (tap the screen once or more) or your heart rate (place two fingers on the screen until you see and feel your heart rate).

  More information:

  Use the touch-Apple Support

• Re: Qosmio F50 - 12 L - Touch buttons do not work

  Hello

  My Touch button cell phone doesn't work and I don t know why.

  I have Toshiba Qosmio F50 - 12L.
  Please help me

  Hello

  I have a Qosmio F50 too and it s really a great book. The design is nice and this laptop really fast.

  On my Qosmio F50 I can t notice a problem with the buttons of the illumination. So maybe you have installed a software application that isn't compatible with the software.
  In your case, I would try to reinstall the Toshiba value added Package. It controls the keys FN, illuminating buttons and all the other special function keys:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  In addition, it would be interesting to know if you are running the factory settings or you have installed your own version of Windows?

  Last but not least, let me give you a little advice: Please read this helpful thread on the problems with the buttons of enlightenment:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165724𨝜

• Satellite A300-14s feather touch button does not

  Hello

  I installed VMWare player on my satellite A300-14 running Windows Vista 32-bit. But after the installation, my pen touch buttons (esp. enlightenment and CD/DVD) has stopped working.
  Then I uninstalled it but still the problem persists.

  I don't have any system point before the installation of restore.

  What should I do?

  Thank you.

  Hello

  You must reinstall the VAP (value added package) for Vista.
  Usually, this should help.

  PS: Clean the BONES and the front register of insatlling the VAP. You can use CCleaner for that...

  Welcome them