Touchpad issues: Satellite A300-1EY

Similar Questions

• Will not activate the touchpad on Satellite A300-1I4

  Hello

  I disabled my touchpad when I had the Vista that achieved with the PC, but I formatted and installed Windows 7 top and now I can't seem to activate the touchpad.

  I tried Fn + F9 or through the Synaptics pointing device settings, but no luck.

  Stats:
  Toshiba A300 1I4 - PSAGCE
  Windows 7 Ultimate x 64

  Hello

  Have you created the recovery disc before you formatted the laptop?
  If so, use this drive, enable the touchpad, and then reinstall Win 7 ;)

  Have you tried to activate the touchpad in Control Panel-> mouse-> other devices?
  Check this too

  There should be an option that should control certain properties of the touchpad.

• Satellite A300 - touchpad & keyboard issues

  I have the same problem that a lot of people is faced with (PSAG8E - 05J00TEN Toshiba Satellite A300 - 21H). I'm sure that the touchpad is not disabled.
  Clean installation of Windows VISTA - touchpad & keyboard half the time not work half the time. I'm sure this isn't a driver problem (if it doesn't not Device Manager said was a problem with the device..). I already tried 5 different drivers...
  I am faced with the question since I bought it... I thought that there could be problem with OS, today I installed UBANTU but face question (Mouse pad stops after some time) with this OS too... I'm sure that its hardware problem not with OS or any driver...

  Please can someone is there any solution for this...

  I have Satellite A300-1LI and it is also PASG8E but I n t notice a keyboard or touchpad problem. At the beginning I used it with the original image of Vista, but about a year now, I use Windows XP Home edition and Win7 as dual-boot. No problem at all.

  If you have noticed this strange problem from day one, why you didn t contacted Toshiba service and asked for help?
  I can imagine there is a hardware problem but I put t know what you want to do all alone on this subject. want to trade you the keyboard or the touchpad only.

  Replacement of keyboard is not a big problem but the touchpad...

• Satellite A300-1AL - keyboard and touchpad issues after change of OS

  Hello

  I'm looking for suggestions or ideas how to deal with the problem of keyboard and the touchpad, which occurred just after I installed the new operating system. I changed from Windows Vista to Windows 7 and my keyboard and touchpad become inactive after a few minutes of starting the system. It is not serious if I write something or not, the unit works for a short time, then turn off automatically. I tried to find updates the driver but failed to come through what might be the solution. It is difficult to work with the screen keyboard so I hope that you will be able to help me.

  Thank you in advance,
  perkit

  I have Satellite A300-1LI and I installed clean Win7 32-bit using the Microsoft installation disc and all devices are working properly including the keyboard and the touchpad.

  Have you installed Win7 upgrade or clean the Win7 version?
  Have you used Microsoft installation CD?
  In General, keyboard and touchpad must work without any additional driver.

• Satellite A300 - issues after downgrading to Windows XP

  After installing windows XP SP3 with success issues showed up hope you can help me guys...

  list of issues:

  1 Fn keys: Œuvres of Fn + (F1, F3, F11)... rest does not work! example Hibernation and the brightness of the screen does not work... (HotKey Utility is installed and I can see it in (Add/Remove Programs) windows.

  2. the TouchPad does not work, cannot be enabled using (Fn + F9), but I can see the icon of its software.

  3. key light (and multimedia) do any work. only the works of audio control...

  4. I can't see the ATi Catalyst Control Center icon or right click on list of funds. But I can see the software listed on (Add/Remove Programs) windows.

  5. the BlueTooth icon disappeared, I saw earlier, but no longer, do not know why.

  6 zoom Utility icon appears on the status bar but can not use it!

  7 pROset problem as shown in the photo, I get this after you click the ConfigFree icon and select Wireless battery then PROset: [image: http://s447.photobucket.com/albums/qq193/poison3000/?action=view¤t=untitled.jpg]

  8 storage Manager Driver keeps telling me that «this computer is unresponsive to the minimum requirements for installing this software...» The installation program will close now. ».

  help please...

  Hey Buddy,

  I think that your installation of XP wasn t Yes successfully ;)

  The list of problems is long and to be honest in your case I would like to reinstall XP again. I mean problems all you need a lot of time and after that I doubt that your system will work correctly and quickly.

  I founded an order of installation for Satellite A300. Use this list to reinstall XP, * step-by-step *.

  (1) Windows XP Pro (SP3)
  (2) Intel Chipset utility
  (3) ATI Display Driver
  (4) Realtek driver
  (5) Realtek LAN Driver
  (6) Synaptics Touchpad Driver
  (7) Ricoh card reader controller driver
  (8) Modem driver for TOSBHIA software
  (9) Motorola Modem driver
  (10) modem region Select utility
  (11) wireless LAN driver
  (12) Chicony Camera Software
  (13) Bluetooth Stack & monitor
  (14) common module TOSHIA
  (15) TOSHIBA Power Saver
  (16) TOSHIBA zooming Utility
  (17) tool of diagnosis PC TOSHIBA
  (18) TOSHIBA Hotkey Utility
  (19) TOSHIBA Touchpad On / Off Utility
  (20) TOSHIBA utilities
  (21) TOSHIBA Assist
  (22) TOSHIBA ConfigFree
  (23) memory SD Ricoh utilities
  (24) acoustic silencer TOSHIBA

  The ProSet application that you can forget. You can configure the Windows WLAN connectivity also.

• Satellite A300 - Touchpad gets too hot

  I bought a Satellite A300 last week and I noticed that when I use the computer for an hour or so the touchpad becomes very hot.
  And also the area of the left hand next to the touchpad.

  Is this normal? Is there a way to reduce it?

  Thank you

  Pedro.

  Hi Pedro,

  I put t know what what is for you hot and wasn't, but on my Toshiba Satellite laptop I've never had a problem that it too hot.

  Normally, I recommend to clean the laptop with a jet of compressed air, but I think that is not necessary because the laptop is only a week.
  Maybe the fan or the heatpipe is malfunctioning. Or the thermal grease to be renewed

  I put t know but in your case, I would go to an authorized service provider. Technicians can check your laptop and it should be free, because the laptop must be under warranty if it s a week-old.

  Welcome them

• Satellite A300-20 b - Touchpad does not work after BIOS update

  I've updated the BIOS on my Satellite A300-20 b latest version 2.00. Update succeeded, but when I rebooted system touchpad has stopped working.

  I tried to find the solution, resettled drivers (windows XP system). In the Windows Device Manager there is no problem with Synaptics PS/2 Port Touchpad, I see. Software Synaptics shows no problem I can enable and disable the touchpad, but it does not work for the touchpad. I tried Linux live CD and in this system does not work as good touchpad. I think there is problem in this version of the BIOS.

  Does anyone have the same problem?

  Hey Buddy,

  Have you tried to turn the touchpad on or off if you press FN + F9? Check this please!
  Also, try to load the default settings in the BIOS.

  What happens if you connect an external mouse to the laptop? It work?

  I can t imagine that the BIOS update causing this problem. If it doesn't work, you need to contact a service provider for help. They can check the touchpad and replace.

• Satellite A300-1tim: - issue of the multimedia keys

  Hello

  I have a Toshiba Satellite A300-1tim: PSAGCE-08X00GPL.
  After reinstalling Windows (Vista 32 bit), everything was fine until the moment when I wanted to turn off the backlight touch multimedia keys, those just above the keyboard (above the F1 to F12 keys).

  Mute, play/pause, stop and change of tracks in Windows Media Player buttons worked very well, except the second button - turning on WMP (but it was flashing after pressing).

  Some time ago, I had these configured buttons in a way the first person (currently silent) turned to the large backlit, second one - a shot on Winamp.

  I installed the package of added value and Toshiba Assist. Now, in Toshiba Assist, after choosing "Toshiba buttons" I only empty fields.
  When I chose to browse and dir: TBS try to choose any function (e.g. drive - disable backlit) it appears in the path and Description sections, I can type something in Option, but nothing appears in the section last but the most important: button name, has nothing to choose, blind fields on the list.

  Of course after you press the register there is no response when I press any button.
  Maybe someone has seen something like that?

  HWSetup I can turn back-lit, but this is not the point, I would do it with a single button as before.
  Value added package 1.1.19 installed with FeatureSelect.ini 1.1.14 (common failure of Toshiba) also chcked v. 1.1.14 (two versions available)
  BIOS 2.20
  Toshiba Assist 2.01.04

  Checked the registry and saw that I have all the keys in the registry:
  HKEY_LOCAL_MACHINE\SOFTWARE\Toshiba\TBS\DefaultSet ting\
  I don't want to dirty it so I did not change anything

  BTW, sory for my English: bravohelen:

  Please check these discussions on similar issues with the multimedia keys on Toshiba.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=66372
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=36917

  * Solution: *.
  Uninstall the VAP
  clean the registry with Ccleaner
  reset

• Satellite A300 - how to activate the touchpad?

  Hello

  I accidentally disabled the touchpad on my satellite A300. Can someone tell me how to re - activate it please.

  Hello

  Press Fn + F9 to turn it on.

• Need driver Win7 for Satellite A300 touchpad

  I have a laptop Satellite A300 model number psaj4e and I can't find touchpad driver

  You should also try driver for Vista because most compatible with 7 drivers. [Toshiba drivers | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] If that does not work, try to use other models...

• Satellite A300 - Satellite icon and touchpad are not lighting

  Hello

  I have a toshiba Satellite A300. When turning the power on it this morning I noticed the 'Satellite' icon and the touchpad are not turn on as usual.
  Always work normally but I'm sure they used to be illuminated whenever the laptop was switched on, or I'm not so sure now?

  Pls help me thanks

  Mar

  Can roll you back the BONE a day or two back to see if it works again. Use please tool of system restore and restore the operating system on time earlier.

  On my Satellite A300, it's always on.

• Satellite A300 - USB port and fingerprints issue

  Hello

  I'm starting this thread that I have problems with my fingerprint reader and my USB port.

  I have a Toshiba Satellite A300-C01 laoptop. It was purchased in September of last year. I have not used it much except for the first week I had it, I've been away (Overseas), and I didn't take my laptop with me (I took a former I). There is no chance that the laptop has been used so that I was absent because I live alone and that the cell phone was simply sitting in the computer room.

  I started using it again about 3 weeks. Around a week ago, I noticed a pop-up (bottom left of the screen) telling me that a USB port had problems. I put my FlashDrive on the first USB port and at first, it was not recognized. I tried with another flash drive I have and who has been recognized. However, every time I start the computer I get who pop up telling me that there is a problem with the USB port.

  I also met a problem with the fingerprint reader. A pop up appears in the lower left side of the screen and say that the fingerprint reader was having problems. Happened since then that the problem with my USB port began to appear. About an hour ago, I checked the Device Manager and the fingerprints fingerprints/biometrics scanner does not appear in Device Manager.

  Has anyone else had this type of problem?

  What did you do to solve it?

  I would appreciate comments that I have no other choice at this time until Monday when the Toshiba support is available (they are available Monday to Friday).

  Thanks in advance,

  Deanne.

  First of all, you should try to update the chipset drivers and software of fingerprint. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If it doesn't work you should try to update the BIOS. Check the Toshiba site for an update.

  In the worst case, you must reinstall the laptop with the Toshiba recovery disc. So you can make sure if it s a hardware issue or not.

• Satellite A300-243 - keyboard and touchpad has stopped working

  Hello everyone

  I have a serious problem in my Satellite A300-243. I installed a driver for external keyboard using a CD and once I rebooted both keyboard and touchbpad stopped working and to make any order, when I reached the vista welcome page.
  What should I do because you know that even if I can't get into the windows to uninstall this driver.

  Any way to do during windows startup?

  Hello

  Why you installed a driver for external keyboard? I've never heard of such drivers

  Anyway, you should try to start in safe mode and then you are able to remove driver external keyboard to the list of software. After I restarted in normal mode, the keyboard and the touchpad should work properly again.

• Update BIOS on Satellite A300 disabled the touchpad in WinXP

  Hey

  I just installed XP on my A300, the installation went well, until I updated the BIOS to to 1.7. After that, the touchpad is irrespeonsive, which means that it is displayed in the Device Manager, but does not.

  I tried the Fn + F9 key and after a long driver Hunt, I decided to re - install Windows XP, to locate where the problem was.

  I also tried resetting the BIOS by default, but once again, without a bit of luck.

  The touchpad still does not work.

  Is there a possibility to downgrade the BIOS?

  Hello Johan

  Can you please tell me what Satellite A300 you exactly (A300-xxx)?
  What model is your laptop?
  Almost all cell phones of the A300 are WXP supported and I can not imagine that the update of the BIOS can kill touchpad. It's very strange.

• Satellite A300 - 1 5: keyboard and touchpad not working

  I have problem with keyboard and touchpad. Laptop satellite A300 - 1 5

  I have Vista home premium and when I turn on the computer, I put password in the user box then my keyboard and the touchpad do not work.

  In the Bios my keyboard work but when Vista starts it doesn't have.

  How to solve this problem?

  Thank you!

  Hello

  First of all, please check the status of the device in Device Manager.
  Please check if the keyboard and touchpad are listed correctly without any yellow exclamation point.

  But you should try to reinstall the drivers again, even if the keyboard and the touchpad have been recognized correctly.
  In this case I recommend to remove the keyboard and the touchpad Device Manager, and then you must restart the computer once more.

  After Vista has restarted the two devices should be recognized again and should work.

  Please check this!