Touchpad not working not not on Windows 8

Similar Questions

• Satellite L855 and Win8.1 - Touchpad stops working after the login window

  New laptop running windows 8.1 Touchpad works for about 30 seconds after windows starts and then stops. I have tried downloading drivers the most recent of the Toshiba site, but it does not solve the problem. Tried the function keys of the touchpad, but it's not the question. Called Toshiba support and they suggest to send it in for a factory reset.

  I have also a problem with AMD graphics will split after that computer screen goes into sleep state. Downloaded and installed drivers more recent for it on the advice of Tech support, but not fixed, or the other.

  I'm a little worried because a research shows these two problems are not uncommon and IV ' e spent a lot of time to copy data and install the software, don't want to lose him and wasting time waiting for factory reset if I need to return ot.

  Anyone have any ideas?

  Factory reset is the best way to solve this problem, but you have upgraded your machine following the instructions step by step http://www.toshiba.eu/innovation/generic/windows8_1-message/?

• Pavilion dv7 6166-nr: Synaptics TouchPad Enable/Disable light not working after upgrade to Windows 10

  TECHNICAL DATA:

  Name of the operating system Microsoft Windows 10 home
  Version 10.0.10240 Build 10240
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  System name SUZANNES-PC
  System manufacturer Hewlett-Packard
  System model HP Pavilion dv7 Notebook PC
  System Type x 64-based PC
  SKU LW473UA #ABA system
  Processor AMD A4 - 3300M APU with 2 logical processors, 2 Lossnay, 1900 Mhz, graphics HD Radeon (TM)
  Hewlett-Packard Version / Date BIOS F.21, 13/09/2011
  SMBIOS Version 2.7
  Embedded Controller Version 51,24 by action
  BIOS Legacy Mode
  Baseboard manufacturer Hewlett-Packard
  Model baseboard is not available
  Name of plinth base
  Role Mobile platform
  State of secure boot not supported
  PCR7 Configuration binding is not Possible
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "10.0.10240.16392".
  SUZANNES-PC\Suzanne username
  Daylight saving time from the centre of zone
  Physical memory (RAM) installed 4.00 GB
  3.48 GB total physical memory
  2.03 GB available physical memory
  4.79 GB total virtual memory
  3.26 GB available virtual memory
  Page file space 1.31 GB
  Paging file C:\pagefile.sys
  Hyper-V - VM monitor Mode Extensions Yes
  Hyper-V - second level address translation Extensions Yes
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - data execution Protection Yes

  NEWS OF SYNAPTICS:

  Material Type Synaptics TouchPad SMBus
  Number buttons 0
  Status OK
  ACPI\SYN1E46\4 PNP device ID & 71B2F2C & 0
  Supported no power management
  Double-click the threshold is not available
  Handedness is not available
  IRQ channel, IRQ 12
  Driver c:\windows\system32\drivers\i8042prt.sys (10.0.10240.16384, 112.00 KB (114 688 bytes), 22:20 09/07/2015)

  PROBLEM:

  The TouchPad works but the light that is usually lit when the touchpad is turned on/off (white/orange) does not work.  I was wondering if there is a way to fix this, or there's someone else with this problem.

  OK, this can be marked RESOLVED.

  I searched and found an older post with the solution by holding down the FN key and pressing the space bar. The fire came as soon as I did it. Go figure!

• The touchpad scroll not working not not on windows 7.

  Hello

  Urgent need help with scrolling touchpad.  Its so frustrating, I have for the top and bottom arrows to scroll and drag is does not work either.  I wonder if I deleted a driver in error?

  Hello

  Try the system restore before that happened:

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ---------------------------------------------------------------------------

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• Keyboard and touchpad not working not not after reboot. Windows 8 Sony Vaio T series Ultrabook.

  My Sony Vaio T series Ultrabook running Windows 8 froze during the execution of a program. The Task Manager does not work, so I used the sidebar on the touch screen to restart. Once I had restarted, or the keyboard or the touchpad worked besides than the backlight on the keyboard. I tried to use the restore system to return a few days, but without success. In my device manager, there are yellow signs next to my keyboard and touchpad. An external mouse does not work either! After a repair, he says: my computer has problems with PnP devices. I can browse only my computer with its touch screen and it's very tedious. I need this computer to type for the school. Help, please!

  Hi Darklo,

  I suggest you follow the methods listed below. Before continuing, please answer the question below.

  (1) what is the program that you try to run?

  I suggest you to follow the below methods and check if it helps.

  Method 1: Run the hardware troubleshooter and check.

  Follow the steps to run the Troubleshooter:

  (a) press the Windows key + C on your keyboard to display the bar of charms.

  (b) type of Troubleshooting , and then click solving problems under settings.

  (c) now, type Hardware Troubleshooter in the option Search .

  (d) click on hardware store to run the troubleshooter.

  Also try to update the drivers for the keyboard and the touchpad.

  Method 2: Update drivers for the keyboard and the touchpad.

  (a)  , press the Windows key + R, type devmgmt.msc.

  (b) right click on the keyboard.

  (c) click on Properties, click the driver tab.

  (d) click the Update driver button.

  (e) click on the OK button.

  Similarly, follow the steps to update the touchpad.

  Method 3:  Run the Microsoft safety scanner.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Hope that this helps, if you have any additional questions, feel free to post. We will be happy to help you.

• 7 caused synaptics touchpad not working Windows Update

  Hello

  I ran the windows 7 updates from last night on my laptop HP G62-373DX.  When I started my computer touchpad not working.  I went into Device Manager & it is said that the touch pad is damaged or missing.  In addition my Kaspersky anti-virus is also disabled now.  I tried to reset the device and also made a system restore back to before I was running updates.  Neither work.

  Any suggestions?

  After talking with support for some time, they suggested I run a recovery, but I could not do this without a mouse (tab would not work to get me through the options).  I don't have a mouse so I thought I'd like to borrow a & then get back in touch with technical support.  In the meantime, I decided to try & get my anti-virus online.  Not sure if this is what fixed it or what, but after I downloaded the update for my anti-virus my touchpad started working again.  Perhaps, that was blocking the installation of the new driver?  Who knows, it works fine now so fingers crossed I don't have any problems more.

• Windows 8 Touchpad not working not

  Original title: Windows 8 Touchpad issues, please help! Urgent

  Last night, I was on Chrome. I think that I accidentally pressed something on the keyboard. Something popped up on the right side of the screen. He had a few options, we were on the connection to a pc upstairs and a few other options below? No idea what it was. I accidentally clicked, now I can use only my touchpad at the sign in part of windows 8. After that I signed in I can not move the cursor. The only way that I can with a mouse, I want to use my touchpad, not a mouse :/

  Please leave suggestions on how to solve this problem.
  Thank you very much!
  Aaron
  p.s. I'm on a Toshiba Satellite C850

  Hi Aaron,

  Welcome to the Microsoft Community and thank you for the post about it.

  It seems that you can not use the keyboard of your mobile PC after you have clicked on an option when using Chrome.

  You can also check for any error in the device for the keyboard Manager and the other pointing device driver and write us. Please follow the steps below to see.

  (a) press the Windows key + X Key on desktop.
  (b) select the Device Manager.
  device of keyboard and pointing other Expand c).
  (d) check if there is no error ( ! sign) or (?) Sign ).

  I want to suggest to the following troubleshooting methods.

  Method 1: run the hardware and troubleshooting the device.

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Follow the steps below:

  (a) press Windows + W together.

  (b) writing Troubleshooting in the search to the corner box and press on enter.

  (c) click the Troubleshooting .

  (d) click view all in the upper left corner.

  (e) select the options of the equipment and devices in the list.

  (f) click Next to run the hardware and devices troubleshooter.

  Method 2: update the keyboard and another pointing device driver.

  Follow the steps below:

  (a) press Windows + X key when you're at the office.
  (b) select the Device Manager.
  (c) find and double click on keyboard and another pointing device driver in the left panel of uninstall
  (d) right click on the device, and then click Update driver software.
  (e) select the software search automatically for updated driver .
  (f) restart your computer.

  If the problem persists, please try the following method.

  Method 3: Uninstall the keyboard and the other pointing device driver.

  Follow the steps to uninstall the driver.

  (a) press Windows + X key when you're at the office.
  (b) select the Device Manager.
  (c) find and double click driver keyboard and other pointing device from the left to uninstall Panel
  (d) right click on the device, and then click Uninstall.
  (e) restart your computer.

  You can download the drivers for the latest drivers from the link given here and install it. Select the download tab and select the correct computer model number.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope that solves your problem, please write to us if you have any other question related to the Windows operating system Microsoft.

• HP Pavilion - 15-ab045sa: a few gestures of precision Touchpad not working not

  Hello

  I'm new to the forum, so I hope I posted in the right place.

  My product: HP Pavilion Notebook - 15-ab045sa (ENERGY STAR)

  I have all the gestures of touchpad usual work (three stroke of finger etc).  However, the recent to THE introduced a new gesture to switch virtual desktops. I was really looking forward to this update, but this gesture does not work! I tried to reinstall the update with erase everything and it still does not work!

  I don't understand why it does not work as I have a touchpad of accuracy and all other gestures of work except this new! Also even if some gestures of work (for example three finger swipe), I don't think that win 10 recognizes the touchpad of precision like under settings of the mouse and Trackpad, what it does not say that I have a touchpad of precision and so does me no options to change what are the gestures, as it should.

  I have the Synaptics TouchPad of SMBus 19.2.11.38 driver (21/07/2016).

  Would really appreciate your help as I was really looking forward to the new gesture switch virtual desktops.

  Thank you.

  Just got an update via windows update Synaptics update to version 19.3.11.37 - it finally allowed me to have the film 4 finger to switch virtual desktops!

• HP Jet 11 - d 010wm: touchpad not working not

  Hello

  I have a HP flow 11. I have upgraded to Windows 10 and had no real problem until I decided to update the drivers (I sent a message that drivers were outdated). I generally don't click on something like that because it causes problems and it was obviously the case.
  After the update, the touchpad stopped working. I tried various fixes, but nothing has worked.
  
  At one point, I went into Add / Remove programs and remove the touchpad Synaptics hoping that, when I rebooted, restart located the touchpad and the driver and reinstall correctly. I was wrong and I think it was a huge mistake on my part. Now I can't get the driver to work I downloaded.
  
  Is it possible that I can get the touchpad to work again. I use a mouse and that works fine but not effective for a laptop.

  Thank you

  Alisonf1

  There are five drivers chipset on hp.com for 11 stream and one is required for the touchpad work, I think it's Intel series IO driver without the support of connected intelligence.  Who install and reboot and see if that fixes it and if not, install the other four.

• Satellite A100 PSAAR: Synaptics touchpad not working not not on Vista Ultimate x 64

  I decided to upgrade my XP 32 bit Vista x 64 Ultimate on my PSAAR A100.
  Operating system works perfectly except one thing - touchpad, which work perfectly under XP, is not answer at all under Vista x 64 (with SP1 of course).

  Worse, it's that my touchpad (Synaptics) is listed in as a work Device Manager correctly. Hmm - I don't remember. Meet your possible suggestions - I tried to reinstall, I tried to use the A200 drivers (since Toshiba does not support drivers for Vista x 64 for line A100) and even had the newer drivers from the Synaptics site. Update Vista even me has new drivers - cool, I admit, but it still does not work, even if Windows does not seem to "know" about any help would be very appreciated :) it...

  PS (optional problem) I also have 2 unknown according to Device Manager devices - since I have no idea what they are, and because I don't think I'm missing something - I simply gave up on top of those - at least for now ;)

  Of course, nobody here the solution for you. :(

  Problem is that this model of laptop is not supported for Vista 64-bit. I don't really know what you can try. Maybe install driver designed for A300?

  I don't really know. You can use an external mouse with success?

• Touchpad not working not not Z580

  Hello.

  First of all, I hope that my post is placed in the right place.

  Since yesterday my notebook computer touchpad (Z580) stopped working after full initialization of Windows 7 (I can use it for a few seconds) so I know it is not a material thing. I've also updated my drivers, still the same problem. And I can still use a USB mouse.

  I searched the internet a solution but without success.

  I have my laptop for about a year and I'm very happy with it.

  Hope someone knows the answer.

  Jeroen.

  Tanks, but since this morning my touchpad started working properly again without doing anything special.
  I don't know what started the problem, I tried many different things without success, I also restarted my laptop several times yesterday, nothing worked.
  But I'm glad its not now.

  Thank you for your support.

  Topic can be closed now.

• Z510 touchpad not working not with select lists or menus

  I have a windows Z510 10.

  When I try to use any application wit just the touchpad and open a list item or a menu select and try to scroll down, as I scroll tht disappears. If I want to scroll a list I have to use the scroll keys or connect a mouse. This happens with thunderbird, chrome and firefox. He arrived not with windows 8.1.

  Thank you for anysgestions.

  Neal

  .

  I think that this has been resolved. I updated the driver toouchpad to the version of windows 10 and it seems to work.

• Aspire e15 (e5-511-p9y3) Touchpad not working not not on windows8.1

  Aspire e15 (e5-511-p9y3) Touchpad not working not not on windows8.1, and I can use the cursor with a mouse. I also installed the synaptics/elantech drivers but it does not show scrollbar option in the mouse-> device settings.

  SOLUTION

  So guys after a thorough research and troubleshooting, I found that you must keep the opinion of a few things at installation time:

  Installation mode: UEFI (only) - LEGACY would create problems touchpad.

  After the installation of windows just follow the hierarchy of driver installation

  1 Intel NB_Chipset_M Baytrail-M

  2 Intel i/o driver

  then the rest of the shit.

  Note: after doing all this make sure your touchpad is active > Fn + F7

  Just wanted to if this solution came from an Executive of acer, the world would have been a better place , but in any case this is what the community is for.

  Enjoy everyone

  [private under the leadership of life]

• Ss15 Touchpad stop working, do not show in the devices

  Touchpad appearing is not in the device, yes already tried Fn /F7 Manager, reinstalled fix driver: No... He is a recent problem, works very well with Windows 10.  I have read several posts on this topic. I think remember that unit must first discover the device (touchpad) and THEN you install the driver, or update the driver.  DOE this "Momentum" driver also update the driver of the "mouse"? The reason why I have ask when I go into the driver information for my mouse, it shows today's date.  My mouse is logitech USB wireless.

  I'm just not used to have a device simply disappear from the Device Manager! any ideas?

  Thanks in advance for any help!

  Ron

  Click the driver. This is Logitech, MS, or momentum.

  Go to Control Panel / programs and features/view installed updates and see if the Logitech

  a updated Windows Update.If Yes, that was the missing touchpad?

• Pavilion dm1 touchpad not working not

  Pavilion dm1 touchpad not working not not using windows 7 Home Edition.
  In Device Manager, I see that the external USB mouse, witch synaptic touchpad does not work.
  Can someone help me please.
  Did all the updates that are offered by HP

  Hello Terry,

  Thanks for your help but the touchpad seems to be defective.

  I use a usb mouse.

  Kind regards

• HP laptop touchpad not working not

  My laptop computer HP touchpad stopped working after a clean install of windows 7. The LED for white touch pad permanently but fires it does not work completely.

  The laptop model is HP Pavilion dv5.

  The original operating system was windows Vista.

  It seems that you install some or all drivers for your laptop computer's hardware once you did a clean installation of Windows 7.

  Go to http://support.hp.com/us-en/drivers

  If you are able to do with the laptop in question, click the button "identify now.

  If, as I suspect, you are not able to access Internet with this laptop, enter your model number.  You need to be more specific than the dv5 Pavilion.  There should be another series of numbers and letters after dv5.  For example, if you have a HP Pavilion dv5-1235dx notebook, you'd end up this page-->

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-dv5-1200-entertainment-notebook-PC-series/3744212/model/3860524#Z7_3054ICK0K8UDA0AQC11TA930C7

  The driver for your tablet would be located under "Driver - keyboard, mouse and input devices."  For the above example, this is the "Synaptics PS/2 Port TouchPad driver."

  You need to install most of the other drivers as well.  If there is a category with multiple choices, such as the driver for the wireless network adapter, you will need to determine the type of device you have by looking in Device Manager.