TouchSmart 300 - 1060 has,

Similar Questions

• my hp touchsmart 300 hp has no sound, how to fix

  H ow do sound on my 300 hp pc

  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  You have a fluorescent lamp next to your computer which could be emitting a rf? This could interfere with the microphone.

  In Windows 7

  Click Start > Control Panel

  Click on hardware and sound

  Under sound, click on manage audio devices

  Under playback (tab)

  Choose speakers you have in your output device

  Click Properties >

  Click levels (tab)

  check if the value is 100% >

  GoTo Enhancments > select Loudness balancing

  Apply and OK

  Should be much stronger now...

  For enhancment bit,.

  and if you have HD realtek soundmanager (R2.37) in your control panel

  Try a classic Equalizer setting

• TouchSmart 300-1120 video card

  Howdy all!

  I recently had my laptop die (which was a disappointment), but I was lucky enough to find a HP 300-1120 which should serve as a good replacement under the machine I keep in my cabin.

  Now, HP has a intel Radeon 3200 card in it. But when we learned this machine, we also found a broken HP 300-1060 has, which looks identical, but has a nvidea GeForce g210, which is a much better graphics card with dedicated memory. Can I get out of this machine, which is broken and put it in this one? The breakage of the machine were able to be controlled by card.

  Ted

  -Teddy bear - wrote:
  Howdy all!

  I recently had my laptop die (which was a disappointment), but I was lucky enough to find a HP 300-1120 which should serve as a good replacement under the machine I keep in my cabin.

  Now, HP has a intel Radeon 3200 card in it. But when we learned this machine, we also found a broken HP 300-1060 has, which looks identical, but has a nvidea GeForce g210, which is a much better graphics card with dedicated memory. Can I get out of this machine, which is broken and put it in this one? The breakage of the machine were able to be controlled by card.

  Ted

  Hello

  Yes, you can put the nVidia graphic card in the HP 300-1120. The motherboards in the two computers are the same, so I suggest to remove the processor as well. The processor in the 1060ea is a triple core Athlon X 3 400e which is better than X 2 in the 1120.

  Both computers take in charge the onboard graphics, but when a dedicated is installed in the integrated card is disabled.

• External video TouchSmart 300-1007 Nvidia card

  ATI Radeon HD3200 integrated video card does not work. Is it possible to install a NVIDIA GeForce G210 , as if it would be a HP TouchSmart 300-1060 a or any other model TouchSmart using the motherboard APP78-CF (Jesse) ?

  Hello

  The card mother card indicates:

  Expansion slots

• HP TouchSmart 300-1120: the video card upgrade

  I came into possession of a HP Touchsmart 300-1120. I do not use not for the games just the navigation and use to watch movies when traveling through Plex home theater.

  I've updated the CPU to an Athlon X 4 605th & maxed out the RAM 8 GB. I noticed that I can upgrade the video card using the Mobile PCI Express Module slot.  Even though I know that the GPU Radeon HD 3200 onboard can handle HD videos, he hangs out considerably. even though I have the film on the hard drive.

  So the question is, where can find one of these cards. And is there a way to upgrade the PSU?

  Thank you

  Jim Hutto
  I do not work for HP.
  I am a computer technician and a passion for computing with more than 32 years of computer repair and networking experience

  Your PC AIO has a sleeve of MXM graphics.  The following video card will work. It was included in some models of PC.

  HP 594505-001 nVidia GeForce G210 512 MB MXM DDR3 video card

  http://PartSurfer.HP.com/ShowPhoto.aspx?PartNumber=594505-001

  You need to search online to find a seller or a person who has one for sale. I see them on eBay for @ $35-50, 00

  The upgrade of the PSU is not a viable option.

• HP TouchSmart 300 connection issues

  Hi, I have a HP TouchSmart 300 with Windows 7 Edition Home Premium that I bought in 2008. Yesterday morning it was working completely fine. The end of the night when I turned it on again, it took a while to start and join the log on screen. I was thinking just leave it off overnight and turn it on the next morning to see if that would help. I turned it on this morning and it took awhile to get to the log on screen, but he got there. Once I logged it took awhile to open a session and he stayed right on the Welcome screen indicating the loading circle. When he connected, the screen was black. Works and move the cursor, but everything else was black. I pressed Ctrl + Alt + Del and the usual options screen appeared. I clicked on log off. I then logged back in and it started to load for awhile then all returned to the login screen. I connected again and again the black screen with the cursor to work. So I pressed Ctrl + Alt + Del again and cliked start the Task Manager and it returned to the black screen. After 10 minutes to leave her like that the Task Manager appears but the rest of the screen is always black. I know 5 years will be a great run by a computer these days, but I just want to know if I could still save and continue to use it.
  
  Does anyone have an idea of what might happen and how I could solve this problem?
  This happened to someone else?

  Hello Mindy123:

  Welcome to HP forum. Sorry you hit hard by malware / virus. The reason I say this is because if Windows are not authentic. This is not the message, that you would see period that yours is false. The real message in a white box appears on a sreen desktop windows open up on the right. He'll tell you please provide Microsoft with contact phone number.

  There are three things you can do. 1 is try the safe mode method. Turn your computer off tension, then restart it tap f-8 keys use arrow keys select Safe mode with network. You can try to remove it by low loading verson of the trialhttp://www.malwarebytes.org/ malwarebytes scanner once he has finished and deleted everything. You can see if your computer starts normal now or if you like you can also try running a free virus scan check as well. http://housecall.trendmicro.com/  If no analysis removes the virus/malware. Your computer still is not booting properly then it in 2 safe mode this time you now open up HP Recovery Manager and perform a Microsoft System Restore. Go to all kind of research programs in the HP Recovery Manager open it select the Microsoft System Restore, click Next until you get to the dates that you select a date as far as you can. It can perform the recovery. Once, he completed see if your computer starts normal now. Sometimes this method whipes on the virus / malware. If this a not you don't have no choice but to do a restore factory, only cd discs.

  Pior that put your computer in safe mode and back up your personal data files once completed. Then precede to step 3.

  3. turn on your computer and press the f-12 Recovery Manager window will open. Select Restore Factory of cd. 1 insert recovery disc follow all orders for recovery. Your computer will be slow at first until it has updated itself witch will take about three days to update. Don't worry about the updates of the trees that fail to install by the end they finley will be installed.  If you have any problems, follow these steps let us know.

  If the three methods don't turn off your computer. Turn on your computer hold down Esc button for 5 seconds. Change the start of your computer in order to initialize disk CD/DVD Recovery disc 1 insert click on save and exit. Restart your computer that will automatically start to recovery. If Recovery Manager ask you how I would like to perform a recovery. Select Restore Factory disk CD and continue to follow the orders of recovery. frrw

• My UK Touchsmart 300 will work in the United States?

  I bought my Touchsmart 300 at the United Kingdom 2 years ago.  Now, I'm moving back to the United States and bring it with me.   I have an adapter for it and if so, what kind?

  Ed,

  Yes, I meant the laptop as power supply. However, since it has an internal power supply, please provide the full name of the HP model and/or the name of the product to the computer in question. I'm trying to determine if the power supply is auto-allant 100 to 240 volts as laptop power supplies are.

  Information of a product number: VG255AA / name of the model: HP TOUCHSMART 300-1025UK indicates that the internal power supply looks like;

  

  http://allpcpower.com/images/products/detail/517133001FULL.jpg

  

  http://allpcpower.com/images/products/detail/517133001DETAILLABEL.jpg

  This picture shows clearly... of 100-240 v, while the first image does not display a red switch. This should indicate that the power is automatic. Now, if your computer uses the same power supply... you can be good to go, just using a computer 110V US cable.

  Please send Bravo

• TouchSmart 300-1115uk: nothing happens on the touchsmart button

  Hello I have a touchsmart 300-1115uk that I just bought this camera from a friend who in his day. so I did a freash install windows 7 64 bit and everything has gone great but then watched some utubes on this machine and see pushing them the button of the interface (little house in the lower-right corner of the screen), but when I hit my nothing happens I have looked for drivers, but can't find one for this button. Please can you how to get this interface running as seems very convenient

  Many thanks tim

  Unfortunately software TouchSmart not is not supported in Windows 8.

  This article is that a good read if you have decided to upgrade to a HP for Windows 8 desktop PC:

  http://support.HP.com/us-en/document/c03457468

  In this document, it is caveat:

  WARNING: HP Linkup, Wizard of Application HP, HP TouchSmart Magic Canvas and all other HP TouchSmart applications are not compatible with Windows 8 and must be uninstalled before the upgrade. The content that is created by using the TouchSmart applications as Graffiti will be unavailable after the upgrade.

• The Touchsmart 300 clear for resale (don't have no Windows discs)

  I have a TouchSmart 300 and you want to sell and if you need to restore it to factory settings and do a thorough cleaning of the memory of the passwords, data personal, etc. The problem is I do not remember how I've implemented the pc originally, i.e. If I just turned on it and it is good to go or if I had install disks and can not find.

  How could I go to achieve this goal, so I can sell it with confidence that all my data has been erased?

  Hello @Porkpie74,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are wanting to do a cover of the plant on your HP Touchsmart 300 and don't know how. As you have not specified the model or the operating system, I'll provide you with the necessary document below. Just choose the one that is your operating system and follow the instructions.

  Perform a recovery of the system (Windows Vista) HP

  Performing a recovery of system HP (Windows 7)

  Performing a recovery of HP (Windows 8) system

  Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a great day!

• I have a TouchSmart 300-1007 that performs a hard block after about 30 minutes to be turned.

  I have a TouchSmart 300-1007 that performs a hard block after about 30 minutes to be turned.

  Windows 7 Home Edition, the stock machine, even if it does even if I start in diagnostics (F9 at the start of the BIOS), so I doubt it has nothing to do with the operating system.

  By "hard block", I mean the screen goes black, the wireless keyboard is not flashing blue light on the USB FOB and the power button only turns off although it by hand for 30 seconds. I have to pull the power cord to turn it off.

  It started shortly after the application of the 5.12 version 2A8E update motherboard BIOS published 2011-03-24. Never should have done that; experience shows that I have more problems than improving when updatng BIOS' are.

  No heat problem (air vents are clean as a whistle). I suppose the best thing would be to restore the BIOS but I don't know if it is possible, or how to do it.

  This is my daily workstation and is now effectively a boat anchor / deadline / brick.

  Any ideas?

  Yay for me. My dose of GENIUS has had this problem for THREE DAYS running machine now without any problem whatsoever.

  It it CERTAINLY evil genius of this machine, no doubt.

  Other victims of the Touchsmart series should regroup and get some kind of compensation. I know that I had to buy a new computer to replace this one when it stopped working, and I spent a TON of time to solve the problem (it would be an easy solution to the factory; not so easy at home)

• HP touchsmart 300-120: the replacement and hard drive and memory

  Hello

  I get the error message "bootmrg is missing. I have tried everything to solve this problem and finally told me that I needed to replace the hard drive. Since I have to replace it, I want to upgrade. I would like to know what the greatest memory and hard drive, I can go for this model... HP TouchSmart 300-1020.

  Thank you

  Good to hear that diagnosis proved to be positive.  You just saved yourself some time and money.

• HP Touchsmart 300-1020 system restore

  Hello, I have a PC HP Touchsmart 300.  I recently sent in for repair and it works very well for a few months.  They replaced the motherboard and the hard disk.  My brother somehow got some malware on the PC so I decided to do a system restore on it.  Whenever I do a restoration of one of the discs of recovery or the recovery partition, it gives me an error saying: Recovery Manager cannot restore your computer by using the image with.  Please contact HP support.  Error code: 0xe0ef0003.  What can I do to solve this problem and to restore?

  Hello

  I don't think your recovery partition can be damaged and the only option for you is to order the Kit of the RRS from HP in order to restore your windows to original state.

  You are still able to get into windows? If so, try to create the RRS Kit, if you can't, try to order the Kit by using the information that I posted below.

  Read this before ordering your recovery discs! (United States and Canada only)

• TouchSmart 300 updated touchsmart 3.0 to 4.0 software

  Hi I have a touchsmart 300 all in one office and want to update the Touchsmart 3.0 to 4.0 software.

  can someone help please

  Hi, thanks for the quick response.

  TouchSmart 300

  S/N 4CH0261SJ4

  PRODUCT / N.        WX101EA #ABU

  Windows 7 Home Premium 64-bit Service Pack 1

• TouchSmart 300: Windows 10 no sound

  Hello

  I have upgraded to windows 7 to 10 and have now no sound. I tried to update the audio driver which is updated but still no sound. ideas please

  Isca13

  Without your specific model number, I can't check for your PC, but I checked several Touchsmart 300 models and the problem is that your driver is NOT updated - and cannot be updated.  Why? Because HP does not provide the Win10 for the Touchsmart 300 pilots.

  If you follow the instructions in the thread and post your detailed model number, I can check for your model: find your model of HP product number. HP® customer support

  But fundamentally, the problem that you are facing is that Microsoft provides only pilots with the most basic features and what you really need for these features in laptops is the specialized drivers written for the specific material found in laptops - and unfortunately, there is no HP Win10 driver for your laptop.  HP only guarantees the compatibility of Win10 for machines manufactured after August 2013. HP is not no matter what timetable indicating when, or IF, they will produce drivers for older machines.

  Here are a few alternatives to pilot, you can continue...
  
  You can try to use Windows updates to find the drivers from Microsoft deposits for your device: http://support.hp.com/us-en/document/c03330139
  
  You can also try following the instructions in this thread: http://support.hp.com/us-en/document/c04763435/
  
  If Windows Update doesn't give new drivers, you can pursue alternative which are described in the linked Microsoft Windows Insider community thread: http://answers.microsoft.com/en-us/insider/wiki/insider_wintp-insider_devices/how-to-install-and-update-drivers-in-windows-10/a97bbbd1-9973-4d66-9a5b-291300006293
  
  If you then run into trouble, install the drivers through Windows Update, you can try to use of Microsoft Windows Update Troubleshooter: http://windows.microsoft.com/en-us/windows7/open-the-windows-update-troubleshooter
  
  Good luck
  
  ========================================================================
  If you feel that my suggestions helped you, please click on the Thumbs-Up symbol; If they helped to solve your problem, please click "accept as a Solution.
  
  I'm a volunteer and I do not work for, or represent, HP.

• How to level the TouchSmart software to version 4 on TouchSmart 300

  I'm on the TouchSmart 300-1020 (product # NY536AA-ABA) running Windows 7 (64 bit) with 4 GB of memory. I want to upgrade the software TouchSmart 3 to 4 TouchSmart. All support for this links are dead.

  Can you help me? My son with autism & other disabilities using TouchSmart - mainly the application of the Web software for the Visual schedule. The upgrade would help us improve the schedule by making it more interactive.

  Thanks in advance!

  Most of the touchsmart features & updates to level is closed now. Check out the link which explains the use of the Touchsmart 4.0:

  http://support.HP.com/us-en/document/c02564388

  If the features are missing, so we live with it and if no got installed, this is our chance.