Trainers

Similar Questions

• adjust frame numbers 3.6.2

  I'm under 3.6.2 numbers on my Mac with El Capitan.

  I want to adjust the exposure of some of the images of certain cells.

  I found this Apple info below, but there is NO Picture tab.

  I found a picture tab to set under VIEW, but it is grayed out.  Can I get a picture in there.

  Any suggestions?

  Adjust exposure, saturation and other parameters of the image

  1. Select the image, and then click the tab of the Image at the top of the sidebar on the right. If you do not see a sidebar or sidebar is not an Image tab, click on in the toolbar.
  2. Use the buttons to make adjustments:
     • Exhibition: Changes the brightness or darkness of the totality of the picture.
     • Saturation: Changes the richness of the color in the image. Dragging to the right makes the colors richer or more dynamic.
     • Improve: Automatically adjusts the image by spreading the tones of red, green and blue evenly on the histogram.

  Although number, you must select an image that is part of a numbers document in order for the contextual trainers to be filled.

• You can send a text message without that it alerts the receiving party.

  Hello

  The reason why I ask this question is I work a very broad time, which is very different, so most of the people, as I work for myself and honestly put in a large number of hours. So I'm the biggest part of the day and don't sleep around 4-5 hours per day, if this (but I take care of myself), made in good health, and I talked to a lot of doctors and weight trainers. But my main question is, I have to send a lot of messages to people everywhere in different time zones and sometimes in different countries. So I was wondering if there was a way to send you a text message without it alerts the receiving end, so he does not wake up, just in case they have forgotten to put not to bother, because I feel always horrible when I wake someone to say Estonia at 05:00 when its 22:00 here. And I'm on a lot of people in Estonia to this fact and throughout the EU. I would be very happy to have any kind of response, and if they do not have this feature, it is absolutely something that Apple should install in their section do not disturb, it would be very useful for many people like me who do business around the world and work long hours, because I'm sure they are more of us out there so I know Laughing out loud.
  See you soon,.
  CHS

  No, you can't control how other people chose to be alerted to their messages. This isn't a feature that apple might add that notifications are exclusively under the control of the receiving phone.

• presentations keynote controller held in the hand

  Apple used to provide a practical hand controller and undress for remote control on a Mac for Keynote presentations. It was excellent, but the device function and remote control was abandoned when infrared eliminated Apple MacBook/Pro. I know that there is a way to sync with iPhones and iPads and a Mac (Keynote) as a remote control, but these are too big to be of any use (think of conferences and presentations requiring the House and not be stagnant behind a forum). Any suggestions? Should I buy a third remote device now? If so, any suggestions? Thank you.

  Should I buy a third remote device now? If so, any suggestions?

  We use frequencies, computer pocket radio equipment remote controls Logitech, Kingston or Gyromouse.

  They have a range of 100 feet and are robust and reliable.

  Much cheeper than buying iPad or iPhone.

  

  These are too big to be of any use (think of conferences and presentations requiring the House and not be stagnant behind a forum).

  IM at a loss to understand your reasoning with tthat statement.

  IV never had any of the thousands of trainers, teachers or university professors we work with complain that the iPads or iPhones are too large or impractical to use in the classroom or conference room.

• Why Firefox 10 insists on saving images (jpg, png, gif) like filename.extension.rb?

  Once I've upgraded to Firefox 10, when I try to record images, for example, the firefox - 54 x 62 PNG on this page, Firefox offers you to save the image under "firefox - 54 x 62 .png .rb" with the type of image "PNG image".

  Found the problem. He was not in the registry. One of the trainers Selenium IDE (I suspect that Ruby of the forced extension) was interfering with the process image save. Issue can be closed.

  Thank you for the help and suggestions.

• RX 100 Macro

  1. how to access quickly the Macro mode?
  2. the auto focus is not available in Macro mode? The manual focus mode is a little confusing to use/then compose.
  3. can I assign my Macro mode settings for quick access to the Macro and then return quickly to my P mode?

  4. I have to say that the manual is terrible, and the generic videos are pretty useless. Sony should pay attention to users of this device very expensive, but sweet.

  Hi 986598-USER... I'm one of the trainers of digital imaging in the Canada, and I think I can help you with some of your questions.

  The RX100 is ideal for close-ups of the Macro and there are several ways you can do. Pardon my numbering scheme is not your questions...

  1. dedicated Macro Mode - spin mode selector t the SNA mode selection, then use the directional control up/down to search for the macro icon (little flower). Once selected, you will now be in fully automated mode designed to close.

  2. Macro switching fast - if throwing himself in the scene mode menu and find the macro is too many steps to quickly find the macro mode, you can easily assign your three custom modes of MR (memory recall), quick access to macro.

  To make this selection mode Macro, or set the camera settings however you prefer, then press menu and look in the menus of settings 'memory '. Select it and it will bring you to a settings screen black with '1', '2' and ' 3' at the top. These are your slots available for custom modes. Use left/right on the rear wheel controls to select 1, 2 or 3. Once you select the desired location, follow orders of the screen to confirm. Now the settings in that you compound will be saved in numbered MR slot you have chosen. To switch quickly between priority to another, such as P as you suggested, just rotate the above MR control dial and select the corresponding number and you're there.

  I find using custom modes of MR particularly useful when shooting with the auto HDR function or when using image effects. I prefer to shoot in RAW format, but the HDR and image effects must be in Jpeg format. Instead of having to go, in the menu to change the JPEG quality momentarily and then again for a quick shooting creative I dedicate a MR slot to do this. This way I can RAW, but if I want to take a quick shot with effects or HDR I just turn the stem of the wheel and turn quickly to M-priority where my choice of RAW is preserved.

  3. the RX100 is always in macro mode! -You can use the dedicated macro mode which increases the bokeh (background of-focus) effect, but this mode is automated for opening/shutter and ISO. I would like to have full control over these exposure settings when I shoot so I shoot most of my stuff in macro manual priority or shutter priority. With an incredibly short development of 5cm, it is the wider focal length the RX100 is able to shoot macros fabulous in any mode you choose. It is designed to attract basically, dedicated macro mode is only a quick guide with some automation. Try to get close in P mode and see what you get!

  4. disorientation MF Assist mode - it is a very useful feature for the fine development, but when you are already very close, when the pleasure that it can a little difficult to 'see' what you are framing. You can disable this tool by entering you menus and by disabling 'MF Assist.

  5 AF in Macro mode? -Yes, the dedicated Macro mode is always with autofocus. If you shoot in P, A, S, M, you can enable or disable the AF options. I prefer to use M or S with active DMF. Direct manual focus is the best of both worlds... it gives you of AF, but also allows you to refine the results before pressing the shutter button completely. So, you get the convenience of autofocus, but can also add personal control to refine your focus by simply adjusting the front control ring. It's different than standard AF because the lens decides what is right downtown, and causes any attempt to manually change the lens fight your setting to refocus its ideal point. The AF is really good, but sometimes he needs a little help and with DMF, you have all the control.

  I hope that some of this aid... Sorry if it was a bit of reading. Please let us know if you have any questions about what I said!

  Now, get out there and shoot a few macros!

• Plugin data: determine the string table values ranging

  Hello, once again

  I have always fought with a use composed of data from the separate tab

  When I read a line via

  sMyLine = file.getnextline

  and try to extract the values with

  aMyValues = split (sMyLine, vbTab etc.)

  the returned array is Variant.

  Now I try to assign values of this array of different channels, for example

  for i = 1 to Ubound (aMyValues)

  ... root channelgroups (j). Channels (i). Values (k) = aMyValues (i)

  next

  This results in an error message "this channel has been generated with e64 Type, values to fill must not be of type VT_BSTR" or what would be the translation into English.

  So I have to turn the table variant to a R64-table. However cdbl (aMyValues (1)) will not work.

  Workaround heavy:

  When reading data with

  root... channelgroups (1). Channels (1). Values (1) = file. GetNextStringValue (e64)

  the value is of the appropriate type. But this translates many read-only operations.

  Is there a way to read in one line and add the values of channels? File.GetStringBlock in the examples is especially used with DirectAccessChannels.Add. But I don't want the new n-channel, but rather add to already existing ones.

  Thank you for your support.

  Michael

  Hello

  I think that there are several ways to reach your goal.

  If you want to assign the values in your table variant of a digital channel, you can use the File.Formatter.ParseString () method. Please make sure you that trainers for your numeric values are defined according to the needs, for example, File.Formatter.DecimalPoint, etc.

  File.Formatter.DecimalPoint = «»
  
  ...
  
  for i = 1 to Ubound (aMyValues)
  
        ... root channelgroups (j). Channels (i). Values (k) = File.Formatter.ParseString (aMyValues (i), eR64)
  
  next

  The best way is to use the StringBlock object. If you do not want to create a new channel for each DirectAccessChannel, you can use ProcessedChannel to add multiple DirectAccessChannels, for example

  Dim processedChn: Set processedChn = channelGroup.Channels.AddProcessedChannel ("ChannelName", eR64, eConcatProcessor)
  
  ...
  processedChn.Channels.Add (DirectAccessChannel)
  
  

  I hope this helps.

• How can I get rid of the blocker on pogo?

  every time I win extra points or a new badge on pogo, I have a Blocker on the game, I click ok, in the hope that I had the badge or points, this pop-up blocker has three steps that pogo had or has, I got three steps sytem ok, but I still the blocker that always pop up whenever I earn game points. How can I get rid of this pop = up blocker? I know that there are trainers that block unwanted stuff. This isn't the problem, it occurs whenever I get bonus points, or a new badge by playing the games. can you help me or give me an answer?

  Hello

  What is the version of Internet Explorer you are using?

  -Pop-up blocker is a feature of Internet Explorer (IE). You can disable or enable this feature of IE setting.

  Enable and disable the blocker Pop Up in IE:

  Below the article should give you a clear idea on how to use this feature.

  Internet Explorer Pop - Up Blocker: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/Internet-Explorer-pop-up-Blocker-frequently-asked-questions

  (It applies to Internet Explorer 7 and 8)

  Blocker of Pogo

  On the pop up blocker application for what concerns the site Pogo and Pogo games, please take a look at the article below.

  My Blocker may interfere with loading games or leave the Pogo.

  See also this similar thread for more information:

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/keep-getting-pop-up-Blocker-message-even-though/6feb89bf-B693-440A-A327-3b01ed1bdb10

  Hope this information helps.

• HP LJ CP5525 won't boot if the network cable is connected.

  Hello everyone, I have a client who brought me a CP5525 for repair with an unusual problem.  The machine will not get past the initialization stage if the network cable is connected.  If the network cable is removed, the machine comes to ready.  Initially, I suspected a trainer Board bad, but instead, I get the same problem.  With the network cable is connected, the machine will not get past the initialization stage.  I know I'm the cable is good I can plug another printer in there and it works fine.  The trainer has a green light on the port of the network adapter when the cable is connected, the led "smiley face" is on the balance and the "heartbeat" light flashes twice and pauses, then blinks twice again and continues to do so, that everything seems normal.  In addition, while the machine is still being initialized, I can press the test button on the print engine and it prints a test page to the normal search.  I don't know if I should just let the machine only and see if it boots never completely, but no idea how long I have to wait, I left longer than 10 minutes and it is not always initialize.  If I unplug the network cable and allow the machine to go ready I can print a log of events and it shows no errors.  Of course, it is used as a network printer, so there need to be ready with a NETWORK cable.  At this point I have no idea what my next step should be to help or ideas would be appreciated.

  I left the nic cable disconnected and allowed the printer to come ready.  Then, I plugged the network cable and tried to install the printer on my network local test.  I ping the printer and he answers, I can't install the printer normally, but it does not print a test page.  When he goes to print the test page the printer winds up as if she warms to print, but then rolls down.  Meanwhile, the port of the network card on the machine poster in green and yellow flashing as if it receives information of the network, but there is no change on the screen and the led lights on the front panel show no change.  Finally, the print job expires and shows that printing does not.  If I try to print from microsoft word or notepad saying, I get the same symptoms.  This happens with the new Council of trainer and the original one.

  Here in the building, we have an another CP5525 installed as a network printer that works very well, I went and printed its configuration and settings page and compared to the printer, I'm working on and they are identical, with the exception of IP addresses of course.  At this point, I have the printer pushed to the side until I can get some ideas of what we must look at the next and I worked on other printers and used this same nic cable to test these machines and they print very well so I know that the problem is related to this printer.  I just need some ideas of what we seek to the next.  I removed the back cover and looked for loose cables and so on.  These machines are newer than most of the equipment that I service so I don't have any spare part for them so I can't start just you order parts at random just to Exchange and see what happens, so if anyone has an idea, I would be very grateful.  The machine is out of warranty at this stage.  Apparently, he was never installed and was sitting on the shelf for the past two years and tried to install it a few weeks ago.

  Two points here. First you move the hard drive to the new trainers, so if the hard drive is the problem you can not say. You have to 'borrow' a hard drive to an another base printer if you have another of the same model. Second by assigning the same network address of the printer if there is a problem with the print server on the base or the driver you are using is bad no way to tell. As I said in my post, you need to isolate your network printer and need to load on a virgin machine where you use any driver laser jet color printer that is built into the operating system, such as the printer color laserjet 5500. My gut tells me the problem is with the network and using the crossover cable confirm this. The fact that the printer is ready and you can print without the cable connected network tells me this. Thing that you can do with the printer NOT connected to the network, ping the ip address. It is possible that some other piece of equipment on the network took somehow this ip address and causes all sorts of havoc with your problem.  Now regarding the update of the firmware.  I'm sure that you have a computer at home that does not restrict the usb port.  Just take a USB key to your computer at home and put a picture of the ORL file on the USB at home and bring to the office and just that insert the drive into the USB printers and turn on the printer and it should ask if you want to load the updated file.  Either way, which base?  I'm retired U.S. Army more than 20 years ago.

• HP has solved the problem of trainer P2015.

  Gentlemen.

  In my company we have over 100 P2015s. Many die because of the problem of well known trainer. These units are no longer under warranty. We decided to buy about 50 trainers to fix these, but until we do - new trainers will be redesigned advice? (I hear they discovered the circuit which caused the problem).

  Thank you

  COD

  This may sound crazy, but our p 2015dn had the same problem until I cooked the trainer as jury said on another forum.  I deleted the Board of Directors of the printer does not work, dissolving the plastic on the right tape/coating, then preheat the oven to 350f, place the Board on three balls of foil on a cookie sheet, let Cook for 8 minutes exactly, removed and let cool and then installed and have now a printer to work again!  Try this with a bad formatter board - what do you have to lose.  May be a low soldier joint in the manufacturing process. But I have worked for me.

• Spam and Virus Blocker application upgrade

  Hello

  I just upgrade the AsyncOS on one of our trainers - there has never been an OS upgrade since it is installed.

  It seems to be stuck on 15% Application Installer (has been for the last hour).

  Is this normal, or is it supposed to do run faster?

  Sean

  Hello Sean,.

  Typically, the upgrade should take less than an hour. Can you please check that:

  1. the device is suspended (CLI command: suspend)

  2. the update interval is increased from 5 minutes to 60 minutes (GUI: Security-> Service updates)

  3 proxy Server in your network do not intercept the upgrade

  Especially the upgrade process get stuck or aborted due to load on the device problems or because of network connectivity issues.

  If the advice above does not help, please do not hesitate to trigger a service request with the support team.

  Thank you and best regards,

  Martin

• New VPN

  I intend to create a new site to site VPN tunnel. I have a 2811ISR on the end of the office and the remote end will be traveling around the world for trainers to carry, which means that the remote endpoint will use a dynamic public IP address whenever they are trying to connect from. I have a spare 3002, but I need to supply more than 1 device for all coaches to carry with them. What would be the Unit recommended for this type of installation?

  Ahh ok, thanks for the clarification.

  The VPN 3002 is end of life now, so you can not buy these. Is the same for the small boxes of PIX. Your best choice would be the ASA 5505 now. Its also is pretty and is convenient to carry all :)

  Concerning

  Farrukh

• I need training

  Need to understand a what thicknesses and mask is how it works and how to change the decorations on photos in PS CC

  Hi Jerry:

  There are a lot of trainers on this forum, and many of us offer an online training, so no matter where you are physically. If a training class is not the budget, consider picking up a copy of Adobe Photoshop CC Classroom in a Book (edition 2015), which are what a lot of the basis of trainers certified their classes on. It is intended to be used with or without instructor, and while of course, we want you to take a course with us, I suspect that you will significantly increase your knowledge (and the answer to the questions listed above) by working through it on your own.

  ~ Barb Binder, Rocky Mountain training

• Is it possible to change the State through several buttons?

  If I have already created, say, 100 identical buttons, and I want to change the State 'down' to a new color other than black. is it possible to do it quickly? I use 9 Captivate.

  Because you talked about "buttons" I assumed that you were pointing to the InBuilt States: Normal, rollover and down. The situation with styles is a little confusing IMO concerning States. You cannot set the States in Manager of Style of the object, as was the case of the Captivate 8 buttons. Since 9 Captivate, you will need to define States in the Panel object, for custom reports also state in regard to integrated States. Part of the InBuilt says are really integrated in the style: this is the case for all of the State for the Image buttons, for the background/outline for other types and form buttons. The labels on the buttons (text, system and form) are not part of the style. The exception are the image buttons because you have to put the text in the images. If you add objects in integrated States, they wil not be part of the style.  Even for States custom: they are not part of the style. I have problems with this configuration of confusing. It would be much easier, I think, if everything was recorded in an object style could be edited and changed in the Object styles Manager.

  The button menu "three lines", also called the hamburger or hot dog button, has opportunities to save changes to an existing style, to create a new style to apply a style to objects with a different style by default (as long as you override, leading + sign to appear).

  This no doubt confused answer: the workflow, I proposed with object styles, does that for characteristics that are saved in an object style (there no real explanation to help him as far as I KNOW). Now, I understand your last answer (sorry) that you are talking about a State that isn't integrated, but custom. In this case, you cannot change this State for all buttons at the same time. Only way is to duplicate the buttons. My apologies, I may have to write a blog about the object styles and its Director. I've heard several trainers proclaiming that they never use the OSM.

• Offline vs online content: different behavior of Flash

  I have developed a software package for the teaching of music that uses Flash: some movies, some scripts. I sell this package for download, but I also hosted it on a server for my students. Since the last update of the Flash Player the strange thing happens that the online version still works, but the off-line version is dead. Charge of the interface, but movies and trainers that use of script are dead. I use Firefox, since Safari and Flash do not seem to communicate at all. This could become a big problem for my customers offline. All solutions?

  < moderator edit: minor change to the title to clarify the matter >

  Hi everyone, one of my friends found the problem: the latest Flash-plugin has now a preference I had not met before.

  Path: Menu Apple > system prefs > Flash player > advanced > trusted location settings.

  Added file affiliated as a trusted location that is resolved. Thanks for your replies!