Transfer between player window
right now I use the boot drive for RAID 1 window 7, but I want to change to a single SSD.
Is it possible for me to transfer my window from my HD to SSD or should I install new window for the SSD with the same key as the one I use on the hard drive?
In addition, it is possible for my HDD in RAID 1 to keep but not bootable?
Break RAID 1 configuration and make sure you can always start a same disc (with the other disconnected drive). If you are able to start, then using one of the software utilities backup Image below to create a backup of Windows 7 hard disk Image, create the "recovery media", start from the recovery media and restore the image on the SSD.
How to pass Windows 7 from a hard disk more bulky to a smaller SSD drive using Acronis True Image.
http://www.PAGESTART.com/windows7korner.html
For this article I'm going to move to Windows 7 Home Premium 32 Bit to a 500 GB for a 32 GB SSD hard drive, drive using Acronis True Image Home 2012 (trial version) image backups.
= Image backup software.
EaseUS Todo Backup Home V8.2 http://www.TODO-backup.com/home/home-backup.htm
Free version: http://www.todo-backup.com/products/home/free-backup-software.htm
Version comparison table: http://www.todo-backup.com/products/home/comparison.htm
Includes: Clone of disk/partition, incremental backup
User Guide: http://www.todo-backup.com/download/docs/User_Guide.pdf
(Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
Supports version 8.0 XP, Vista, Windows 7, 8 / 8.1 and Windows 10
Acronis True Image 2015 - has a 30 day trial version available, key to test sent to your Email address.
Note: Initialization of cloning and the road (creating a MBR) are not supported in the trial version.
For the trial version, the recovery is only available when starting an Acronis Bootable Media CD.
Install Acronis and then create a bootable media restoration/rescue CD before you start creating your first backup image
http://www.Acronis.com/en-us/personal/true-image-comparison/
30-day trial: http://www.acronis.com/en-us/personal/pc-backup/
True Image User Guides and documentation:
http://www.Acronis.com/en-us/support/documentation/
2015 supports XP, Vista, Windows 7, Windows 8 and 8.1
Paragon:
Free version: http://www.paragon-software.com/home/br-free/
Guide: http://www.paragon-software.com/home/br-free/download.html
Home Version $ 39.95: http://www.paragon-software.com/home/brh/
Support: http://www.paragon-software.com/support/
Macrium Reflect free:
Free version: http://www.macrium.com/reflectfree.aspx
(no technical support available for the free version)
Macrum reflect Standard ($44.99)
http://www.Macrium.com/personal.aspx
Suport: http://www.macrium.com/ticket.aspx
Note: For users who have a Western Digital hard drive, there is a free version of Acronis 2013:
http://support.wdc.com/product/downloaddetail.asp?Swid=119
Release notes: http://support.wdc.com/download/notes/ATI_WD_RN_5962.pdf
Guide users for WD Version: http://support.wdc.com/product/downloaddetail.asp?swid=119&type=userguide&wdc_lang=en
J W Stuart: http://www.pagestart.com
Tags: Windows
Similar Questions
-
How to transfer music from Windows Media Player for Nokia E71 Smartphone?
How to transfer music from Windows Media Player 11 for my Nokia E71 smartphone using a USB/cable connection? (Operating system XP sp3) I would choose mass storage mode or transfer media on the phone? WMP does not detect the E71 even if it is a compatible device. The Nokia site advises that WMP auto-reconnaît the phone and then briefly lists the synchronization process that WMP explains in detail. Can you please provide the steps leading to load 8 GB card my phone with music?
Hi treksie,Check the following Nokia Support positions and see if it helps you:Here is an article to set up a device to sync with Media Player:To know the mode of transfer, contact The Forum Nokia's Support because they are the best people who can guide you on this issue. -
I'm doing a little holiday video film but I can't transfer music from windows media player in windows movie maker when I try to transfer a file of special music, a message appears indicating that the spefic module is not found. Is this a copyright issue that the file is in the media player.
Try to copy the files from your music folder.
Windows Vista - Movie Maker - add music to your movie
http://Windows.Microsoft.com/en-us/Windows-Vista/add-music-to-your-movieWindows Vista - works with the music folder
http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-the-music-folder -
What is the fastest way to transfer files between two Windows 7?
I have two machines windows 7. I use LAN to copy files. It is only 140 Kbps. Then I use TeraCopy to the task. The speed is now 410 kbit/s. It is still too slow to copy a 80 GB of files via the LAN.
You have any good ideas?
I Googled that there are a lot of said articles file copy Windows 7 via the LAN is slow as it is the case, is it?
I tried to use Windows Easy Transfer. Well, I do not see the speed, and I don't know how long it will take for the transfer file either.
I want to see a better plan and advice.
Hello
Transfer of files from one computer to another depends on many factors such as the speed of the computer and the method you choose to transfer the file.
Visit the link to learn more about the methods for file transfer between two computers:
-
How to switch between multiple windows in the same application?
Hello
I use OS X Capitan version 10.11.13 and I'm trying to find an easy way to switch between multiple windows in the same application by using CTRL + alt or different keys.
Here is what I feel...
Let's say I have Outlook, Google Chrome, Safari, iTunes and apps 'about this Mac' open.
I open the new message window in Outlook and another Chrome window. I have therefore 2 separate windows in Outlook and Chrome.
With that, I'm unable to move the composition and the window main outlook which is so annoying. Let's say I want to read the emails by the prospect main window and transfer of the content of the compose window! The command + tab doesn't take me to the main window of Microsoft outlook! Even if there were the last visited / applications window. This constraint is not intuitive, unless it can be configured in the settings?
Strangely, I can't switch to the "about this Mac" window.
The work around is to use the function (F3) mission button and click on the window, that I want to use or click the "Outlook" application on the dock icon and choose the window in the list.
Does anyone know how switch between different windows in the same application by using a key combination or one another method other than listed above?
Thank you
Avinash
In general, an Application that can open multiple windows provides a "Windows menu" you can choose the window you want.
-
How to transfer music from Windows Media to ITunes
How to transfer music from Windows Media to ITunes
See iTunes & Windows Media Player to play well.
TT2
-
I get the message Windows Media Player: "windows media Player cannot find the file.
I get the message Windows Media Player: "windows media Player cannot find the file. The link between the library item and its digital media file associated with may be broken. To solve the problem, try to fix the link or delete the library item. "When I try to record several songs. I can play the songs so I don't know what link is broken. The problem started after I tried to play a CD using Nero Essentials. I have since uninstalled Nero from my computer but I still have the error message and can not burn a CD.
Hello
Step 1: Change the media files are automatically added to the library when played.
(a) click the arrow below the Library tab, click More Options, and then click the Player tab.
(b) to prevent media files on your computer or the Internet to be added to your library when you play, delete media files add to library when played check box.
Step 2: Also rebuild the database of windows media player.
Follow the steps in http://support.microsoft.com/kb/925718
Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
How can I transfer Media Player Playlists and settings from one computer to another?
How to transfer on sides from one computer to another?
I use windows media player to work... I'm getting a new computer... I worked hard to rate/organize my music into playlists, etc... How can I transfer this information to my new computer?Hi Kristylundahl,
You can use Windows easy transfer to transfer files and settings from one computer to the other. There is no way to transfer just the playlist of media
settings to another computer. With the help of windows easy transfer, you can move your music, playlists, and album art files to another computer.For more information, see these links:
Windows Easy transfer of :
http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transferTransfer files and settings from another computer:
http://Windows.Microsoft.com/en-us/Windows7/transfer-files-and-settings-from-another-computerKind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
In this case all that is display of each tab. For example, if I open it, say, 8 new tabs by default it takes about 5 seconds to switch between them, although all that they show are links to my sites top of page 9. I also noticed a new tab opening takes more time more I already opened. The problem is particularly well with the tabs. Navigation is not just slower than usual and as I said above, switching between Firefox Windows in not affected.
If it works in Mode safe mode and normal mode with all extensions (Firefox, Tools/menu key > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.
Close and restart Firefox after each change via * button '3-bar' menu > exit (Power button)
- Windows: File > Exit
- Mac: Firefox > quit Firefox
- Linux: File > exit
-
Satellite Pro L40 - 17F: everything by playing the DVD player window flickers
I have a new Toshiba Satellite Pro L40 - 17F with all the updates of Windows Vista (Home) applied. This includes those optional (for example driver updates)
I came to be used for the first time (outside the application of windows update) and play a movie. The player (not the controls, just the player) window flashing continuously, even on the menu screens. It almost seems that the film was shot with an old film camera and is played on a projector.
I have not really looked at it properly yet, but I wonder if this is a common problem...
Someone at - he had the same thing? What about a solution?
See you soon
Not easy to say that this could be what software do you use?
Have you tried different players? If this is not the case, check this box!Have you noticed this problem only play DVDs using the DVD player?
-
How can I Alt - Tab between Application Windows even?
Chromebook/Windows/Linux I can alt tab between the application windows, but on mac, I can only switch between the applications themselves.
Is there a way I can do so that I can alt tab between chrome windows?
Thank you
ADIN
ADIN,
Try (⌘ + ~).
-
making data transfer between two computers
Hello
I developed a labview for data acquisition goal program. I need to run a part of my program in a computer and some said in another separate computer. for data transfer between these two computers, I decided to use the Protocol of data taking. a computer, collect data and send data to the second computer and second computer will control the setting of data acquisition in the first computer. now I have developed the program but it does not work. I wonder if that is enough to link these two PC by a network cable or something needs to be done. of course, I have some problems with the source definition in the Protocol of data taking. need two labview program in two separate computers.
Best regards.
the problem is resolved.
transfer of data from socket, simply connect two computers with a LAN cable, as I did. The problem is the URL parameter. I got the error as follows:
==> in main and remote program, the URL must be the same and the computer name that data socket server is running must be incloded in the two URLS. (my mistake was that I had used two different URLS in the main program and remote). either way, I realized that this isn't neceessary to Server execution data socket in the two computer.but that that send data.
concerning
-
SSL security certificate; Server error ping while testing the Ping between 2 Windows servers
Hello
I created SelfSSL certificate for a Windows Server to connect to another Windows Server. I have install the certificate using the MMC Console SelfSSL
(Certificates). When I run an application to test the Ping between 2 Windows servers... The below error is the result of executing that PING test.
Hope someone can enlighten me on a resolution?
Thank you
Try asking in the Windows Server forum:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer -
When I download a wmv on an internet site and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni. I was told that the media player can miss a card.
Hello
1. what operating system is installed on the computer?
2. are you able to play videos other than video .wmv successfully?
3. don't you make changes to the computer before the show?Method 1
I suggest you to check if the hardware acceleration of the display device setting is too high.
a. Click Start, click Run, type desk.cpl and then click OK.b. click on the settings tab and then click Advanced.
c. click the Troubleshooting tab, and then move the hardware acceleration to none.
d. click on apply and then click OK twice.
e. If the problem is resolved after you move the slider hardware acceleration to none, contact the manufacturer of the graphics adapter driver to determine if there is an update that resolves this specific problem.
Method 2
The required codec is missing or damaged. If the problem occurs when you use a .wmv file, download or reinstall the latest version of Windows Media Player. If you use an earlier version of Windows Media Player, upgrade to the current version of Windows Media Player for your operating system.
http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-PlayerIf the problem occurs when you use a different format of video file, for example a .mpeg file or an .avi file, download or reinstall the appropriate third-party codec.
Codecs: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questionsNote: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.
-
my player windows media "does not. It freezes when I'm clicking on the library. I can play songs when I double-click on them in my documents.
Hello
1 how long have you been faced with this problem?
2 have you made changes on the computer before this problem?Run the following article fixit tool and check.
Solve the problems of Windows Media Player video and other media or library
http://support.Microsoft.com/mats/windows_media_player_diagnosticLook for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Reference:
Using the event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=trueUnderstanding of event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=trueProcedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427
Maybe you are looking for
-
How to spend the last $ 0.06?
Hi all, I'm going to go back to China in a week so my Apple ID region will be changed to the Australia to China. However, my account were still $ 0.06. Can someone tell me how to spend this last $ 0.06?
-
I got a kernel panic since I upgraded to OS X El Capitan and downloaded Parallels for Windows 10. Kernel panics occur even if I have not opened Parallels. Kernel panics seem to happen when I use safari or chrome. Sometimes, I can use my computer for
-
Clean install of Vista professional stops on Satellite L300D
I have a new L300D that came with Vista Home brand, and I want to install Vista Business. I tried an upgrade, but which is not allowed! So I tried to do a clean install of Vista Business or Vista Ultimate (I need facilities to the membership of domai
-
Problem Lenovo Z500 USB 3.0 driver under Win 7 SP1
Hello.. -What someone solved the problem with USB 3.0 the Lenovo ideaPad Z500 Win 7 SP1? When I try to install the drivers for it, it gives me empty warning message and USB3.0 does not... USB 2.0 works great... There are photo which gives me after tr
-
Generation of loop infinite nest
Hello I have tried to create a nest of infinite loop For TestStand and stuggling to find a way to do a little. If you see the attached screenshot, the program runs to each index of the table, for loop 1. There is another loop For loop 2, with the Sta