transform an incoming call to a conference

Similar Questions

• dealing with the unwanted incoming call to SX 20 during the Conference

  Could someone help me please with a problem I have with a new system of SX20.

  Is it possible that the system can be set to do not disturb when the first call is in place?

  The Polycom VSX 7000, there is a setting in the option multipoint-to-multipoint auto-répondre calls, no auto answer or reject the call.

  This means that the first call can be set to auto answer mode and all calls will be rejected.

  Is it possible that the SX20 can be put in place in this same mode - auto answer the first call and then dismiss all other incoming calls in "do not disturb" mode

  The only option that seems to work is either reject all calls or unwanted calls "ringing" in the session.

  Thank you very much

  Hello

  You can change default "Allow" on "deny".

  Conference 1 IncomingMultisiteCall Mode: enable

  Deny: An incoming call will be rejected if you are already in a call. You will not be notified
  on the incoming call. However, the call will appear as a missed call in the call history list.

  BR Oleksandr

• Transformation of the party calls for different incoming calls whose previous number value (0)

  Community salvation.

  If you see my other discussions created the last days, I managed to configure some functions on our 6.2.1 CallManager. that we really needed.

  But there is a problem and I would like to ask you once again.

  Our internal Cisco phones have 3-digit extensions, from 100 to 999. We had the problem one 0 prerequisite not indicated for missed calls, which I fixed in a translation model that adds two '00' to any incoming call. For outgoing calls, one is removed by the CallManager (PreDot), so called work very well.

  BUT: the translation model that adds the two 00 only works 100% with 10 digits of the external numbers. For example: If a mobile with 0170555yyyy calls an internal number, it is translated to 00170555yyyyy (without translation, it is only 170555yyyyy) and recall works very well. If instead a mobile with 0170555yyyyyzz calls an internal number, it is translated to 00555yyyyyzz. The reason that seems logical: the translation has the value "00xxxxxxxxxx". So it works only with external 10-digit numbers.

  What should I do to make it work with ANY external number? So who calls internal phone - gets two leading '0' being the tracking number by the rest of the caller id?

  Can be simple - but I do not see the answer. :-(

  Thank you. Kind regards.

  Oh, I see what's wrong. You don't need any call mask part xform. Leave the field blank and just add the prefix...

  Please note all useful posts

  "opportunity is a haughty goddess who don't waste no time with those who are not prepared."

• Configure incoming calls to route to the internal unit

  I have a Cisco 2921 router which has a 4 FXO inside card. I would like to configure so that ALL incoming calls on all 4 ports to be forwarded to a post internal (1001), it is a test environment and I can't seem to understand what Miss me. The config is below:

  Building configuration...

  Current configuration: 8500 bytes

  !

  ! Last configuration change at 08:19:46 EST Friday, March 1, 2013 by sjones

  !

  version 15.1

  horodateurs service debug datetime msec localtime

  Log service timestamps datetime msec localtime

  no password encryption service

  sequence numbers service

  !

  hostname WH-VOIP-2900

  !

  boot-start-marker

  boot-end-marker

  !

  !

  logging buffered 10000000

  !

  AAA new-model

  !

  !

  AAA authentication login default group Ganymede + local line

  /NOAUTH AAA authentication login no

  default AAA authorization exec group Ganymede + local no

  /NOAUTH AAA authorization exec no

  orders accounting AAA 15 by default start-stop Ganymede group.

  Default connection accounting AAA power Ganymede group.

  !

  !

  !

  !

  !

  AAA - the id of the joint session

  !

  clock timezone IS - 5 0

  summer time clock IS recurring

  !

  No ipv6 cef

  IP source-route

  IP cef

  !

  !

  !

  !

  !

  no ip domain search

  IP domain name mgsd.edu

  !

  Authenticated MultiLink bundle-name Panel

  !

  !

  !

  !

  !

  !

  FXO trunk group

  !

  Crypto pki token removal timeout default 0

  !

  Crypto pki trustpoint TP-self-signed-3979560690

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 3979560690

  revocation checking no

  !

  !

  TP-self-signed-3979560690 crypto pki certificate chain

  certificate self-signed 01

  308201B 6 A0030201 02020101 3082024D 300 D 0609 2A 864886 F70D0101 04050030

  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30

  69666963 33393739 35363036 6174652D 3930301E 170 3130 31323232 31333533

  30375A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D

  4F532D53 5369676E 656C662D 43 65727469 66696361 74652 33 39373935 65642D

  36303639 3030819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101

  8100DD47 9227149F 2D084CE5 3 D 7DBF4FCA 227595 C3519000 3F468821 D56F653A

  E74FCBAD B4936598 F0C26B2B 6132ADE7 1B1BDC89 44D3C53F 63DDAF78 8E08FCA7

  7044095A DBE38889 7CD 48871 94ED1CF9 F2ECC50A 8BD21AFC 5BC3B3FC B322E161

  F3CE339A 88AA803B E3705349 03A7D918 C11E5844 ECF039EB FEC44CDF 52A59AE5

  0C 430203 010001A 3 75307330 1 130101 FF040530 030101FF 30200603 0F060355

  551 1104 19301782 1557482D 564F4950 2 D 302E6D67 323930 73642E65 6475301F

  23041830 16801463 9BA90049 2F6005DC F2A35FC3 0EDB2530 0603551D 4138 329D

  1 D 060355 1D0E0416 0414639B A900492F 6005DCF2 A35FC332 9D41380E DB25300D

  06092A 86 01010405 00038181 005C2C45 9F687AEF 3219F567 337E55CD 4886F70D

  9E524A1B 7879B3B1 F3C872F9 DFF7F014 FFE0D84B 67252EFE 3DFF8959 9565ADE2

  79857E34 FFF2C3DE 667D5D62 8A4E4690 D874CF4A 8B 180832 7748D1E8 BB71543B

  BC404126 02DABACB DDF24EE6 6F63F8CE F7F8494C 66115C B768BC77 DA2D5C2C 77

  984DC376 A16F2B81 D1CBD44F F23B8605 D4

  quit smoking

  voice-card 0

  DSP services dspfarm

  !

  !

  !

  voip phone service

  h323 connections allow h323

  allow connections h323 to SIP

  allow connections sip h323

  allow sip to sip connections

  redirect ip2ip

  Fax protocol t38 ls-redundancy version 0 0 hs-redundancy 0 help none

  H323

  !

  voice class codec 1

  g711ulaw codec preference 1

  codec preference 2 g729r8

  !

  vocal h323 class 1

  H225 timeout tcp establish 3

  Call slow start

  prerogative of the call

  !

  !

  !

  !

  !

  license udi pid CISCO2921/K9 sn FTX1448AJ6B

  HW-module pvdm 0/0

  !

  !

  !

  username admin privilege 15 secret 5 $1$ iKc / $uQJli0iQG9VAu4PiFeYC8 /.

  !

  redundancy

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  interface GigabitEthernet0/0

  Description inside LAN

  IP 10.40.0.51 255.255.0.0

  automatic duplex

  automatic speed

  H323-gateway voip interface

  H323-gateway voip bind port 10.40.0.51

  !

  interface GigabitEthernet0/1

  no ip address

  Shutdown

  automatic duplex

  automatic speed

  !

  interface GigabitEthernet0/2

  no ip address

  Shutdown

  automatic duplex

  automatic speed

  !

  IP forward-Protocol ND

  !

  IP http server

  local IP http authentication

  IP http secure server

  IP http timeout policy slowed down 60 life 86400 request 10000

  !

  IP route 0.0.0.0 0.0.0.0 10.40.0.1

  !

  !

  !

  !

  !

  !

  SNMP-Server RO community mgsdvoip

  SNMP-Server RO community mhsswitch

  location of Server SNMP "Mooresville High School"

  Server enable SNMP traps snmp authentication linkdown, linkup warmstart cold start

  Enable SNMP-Server intercepts ATS

  Server enable SNMP traps eigrp

  Enable SNMP traps envmon fan supply temperature State of the server stop

  Server enable SNMP traps insertion withdrawal flash

  SNMP-Server enable traps energywise

  Server enable SNMP traps cef resources-failure-change of State peer peer-fib-state-change inconsistency

  Server enable SNMP traps config-copy

  config SNMP-server enable traps

  Server enable SNMP traps config-ctid

  entity of traps activate SNMP Server

  Server enable SNMP traps hsrp

  Enable SNMP-server holds the CPU threshold

  Server enable SNMP traps syslog

  Server enable SNMP traps vtp

  Server enable SNMP traps srst

  SNMP-Server enable traps voice

  SNMP-server host 10.65.0.252 version 2 c mgsdvoip

  SNMP-server host 10.10.0.252 version 2 c mhsswitch

  RADIUS-server host 10.60.253.10 key Pa$ $word

  RADIUS-server application made

  !

  !

  control plan

  !

  !

  voice-port 0/0/0

  1 FXO-group of circuits

  connection ÉRA 1001

  Description 704-799-0516

  !

  voice-port 1/0/0

  2 FXO-group of circuits

  connection ÉRA 1001

  !

  voice-port 0/0/2

  3 FXO trunk-group

  connection ÉRA 1001

  !

  voice-port 0/0/3

  4 FXO-group of circuits

  connection ÉRA 1001

  Description ==> 911

  !

  !

  !

  SCCP local GigabitEthernet0/0

  SCCP ccm 10.65.0.63 identifier 1 version7.0

  SCCP

  !

  SCCP ccm Group 1

  link interface GigabitEthernet0/0

  associate the profile 1 WH-2900_CFB register

  the associated profile 2 registry WH-2900_MTP

  !

  dspfarm profile Conference 1

  Codec g711ulaw

  Codec g711alaw

  Codec g729ar8

  Codec g729abr8

  Codec g729r8

  Codec g729br8

  maximum sessions 4

  associate the PCRS application

  !

  dspfarm profile 2 PSG

  Codec g711ulaw

  maximum sessions 2 material

  associate the PCRS application

  !

  voice POTS dial-peer 1

  trunkgroup FXO

  incoming called-number.

  !

  Dial-peer voice 2 pots

  destination-model 9 [2-9] 11

  Setup progress_ind allow 3

  alert progress_ind activate 8

  progress_ind enable progress 8

  port 0/0/3

  Forward-digits 3

  !

  Dial-peer voice 3 pots

  destination-model $ 911

  Setup progress_ind allow 3

  alert progress_ind activate 8

  progress_ind enable progress 8

  port 0/0/3

  Forward-digits all the

  !

  Dial-peer voice 4 pots

  trunkgroup FXO

  destination-model 9 [2-9]... [2-9]......

  Setup progress_ind allow 3

  alert progress_ind activate 8

  progress_ind enable progress 8

  Forward-digits 10

  !

  voice pots Dial-peer 5

  trunkgroup FXO

  destination-model 91 [2-9]... [2-9]......

  Setup progress_ind allow 3

  alert progress_ind activate 8

  progress_ind enable progress 8

  Forward-digit 11

  !

  Dial-peer voice 6 pots

  trunkgroup FXO

  destination-style 9011T

  Setup progress_ind allow 3

  alert progress_ind activate 8

  progress_ind enable progress 8

  prefix 011

  !

  Dial-peer voice 32 pots

  trunkgroup FXO

  composition of 4-digit SRST Description to other sites

  destination-model 2...

  Forward-digits all the

  prefix 704658

  !

  Dial-peer voice 100 voip

  preference 1

  destination-model [2]...

  Setup progress_ind allow 3

  progress_ind connect enable 8

  progress_ind disconnect switch 8

  session target ipv4:10.65.0.23

  codec voice-class 1

  h323 voice-class 1

  DTMF-relay h245 alphanumeric

  rate of 14400 Fax

  IP qos dscp cs5 signaling

  No vad

  !

  Dial-peer voice voip 101

  preference 2

  destination-model [2]...

  Setup progress_ind allow 3

  progress_ind connect enable 8

  progress_ind disconnect switch 8

  session target ipv4:10.65.0.63

  codec voice-class 1

  h323 voice-class 1

  DTMF-relay h245 alphanumeric

  rate of 14400 Fax

  IP qos dscp cs5 signaling

  No vad

  !

  !

  !

  !

  access controller

  Shutdown

  !

  !

  Call-Manager-emergency

  secondary-tone 9

  MAX conferences 4-6 win

  transfer full-consult system

  3 timeouts interdigit

  IP source address 10.40.0.51 port 2000

  Max-joined 50

  Max - dn 100 double line

  primary phone message system is offline

  secondary system message standalone

  1 7046582 model numbering plan... extension-length 4

  transfer-model. T

  KeepAlive 10

  voicemail 2525

  call-Park select non-auto-match

  ground of appeal forwards. T

  call forward availability 97046582525

  timeout before call 97046582525 16 noan

  aa-mm-dd date format

  !

  !

  VM integration

  direct model * GNC

  peer-to-peer of nonresponse 5 FDN of mires * GNC *.

  peer-to-peer busy 7 FDN of mires * GNC *.

  safe-to-post non-response 4 FDN of mires * GNC *.

  safe-to-position 6 FDN of mires * GNC *.

  !

  !

  Line con 0

  password V01pG8te

  line to 0

  line vty 0 4

  access-class 23 in

  privilege level 15

  password V01pG8te

  transport input telnet ssh

  line vty 5 15

  access-class 23 in

  privilege level 15

  password V01pG8te

  transport input telnet ssh

  line vty 16 1114

  transport of entry all

  !

  Scheduler allocate 20000 1000

  NTP 129.6.15.29 Server

  end

  Jeff,

  I guess that 100 & 101 voip dial peers point to a CuCM?

  The destination model on the voip dial peer does not 1001 on the ERA and they must change to something like: -.

  Dial-peer voice voip 101

  voice mail Dial 100

  destination-model [12]...

  voice mail Dial 101

  destination-model [12]...

  destination-model [2]...

  Hope this helps,

  Craig

  PLEASE EVALUATE THE MESSAGES USEFUL

• Can't do out calls and incoming calls go straight to voicemail

  Cannot do out calls and incoming calls are directed to voicemail

  See If you can not connect to a cellular or cell - data Apple Support Network.

  TT2

• Incoming calls mute after updating iOS 10.0.0.2 iPhone SE

  Hello

  After the update of 10.0.0.2, I saw a strange problem on my iPhone SE:

  • Incoming calls appear to be muted 2 ways (the two of us don't hear)
  • The speaker and mute icons on the screen looks normal (non-active)
  • When pressing the speaker icon 2 times (the first time it activates the "speaker" icon, but not the President himself, the second time, it disables the icon) all works fine again.

  It's the same when you use the standard helmet.

  A reboot seems to fix my problem for 1 time. But after that, the problem returns.

  I could not find any related problem, so maybe I'm missing some (new) settings?

  Any help is greatly appreciated!

  Peter

  Hi Montfrooij,

  Thank you for using communities of Apple Support. From what you have said, it seems that you are not able to hear a person during a call on the iPhone. Looks like you already have a troubleshooting.  I recommend you to read this article, it may be able to help solve the problem. You can also check that the iPhone is not connected to a headset Bluetooth, the sound of routing to that rather than the receiver.
  

  If you do not hear a person on an appeal or a voice message or if the sound is not clear on your iPhone - Apple Support

  See you soon.

• Can not see incoming calls when the iPhone is locked

  When my iPhone is blocked I don't see if there are messages or incoming calls. It isn't anything like that before.

  Thank you

  check the tools on your phone

• no caller ID on a second incoming call on IPhone 6

  If I talk to someone, and someone else tries to call, I get a sound notification of this second appeal, but NO caller ID. Sometimes I do not even an option to swtich to the second call. Or, I have to let him keep a sound signal, or cling to the original caller. Why is this?

  Also, if I'm (although once in awhile), able to switch to an incoming call, I am UNABLE to return to the original call. Sometimes a 'swap' message, but most of the time, I end up hanging up everyone. so I ignored any second call when I am engaged in the conversation. It is a $600.00 phone that is apparently able to do everything, except what was originally invented for the phone. someone at - it a solution?

  I've not seen this. That your operator has had to say when you ask, they control the management of calls?

• No sound on the hands-free car on incoming calls after upgrade iOS 10

  I recently updated my iPhone to iOS 10 6s. With one of the versions iOS 9 it makes my hands-free connection in my Toyota 'agitated', but this time I could call people without problem, so I thought everything was ok. That was, until I got a call and didn't hear a thing after accepting it.

  Seems iOS 10 has broken my audio on incoming calls. I can't hear the caller, and the caller does not hear me. I tried to reset network and matching settings once again, but unfortunately which didn't help either (this resolved the problem of stuttering last time).

  Anyone got tips on how to solve this problem?

  DelGurth salvation!

  I see that your car radio on your iPhone Bluetooth connection no longer works correctly.  I know it's important to have this job just so I'm happy to offer assistance.  Please follow the instructions in this article, and it may be necessary to contact Toyota to see if there is an update of the firmware available for your car stereo.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  Thank you for using communities of Apple Support.

  See you soon!

• Reject incoming calls on ios 10 not listed is not on the lock screen (Notification)

  Reject incoming calls when the phone is locked by pressing the power button / stop on ios 10 that the same call does not appear on the lock screen or (Notification) as a reminder...

  N ° it will not. He never has. you will see a missed call notification if you miss the call. If you actively reject the call, you don't have to Miss it. Access your recent calls list and call back them was from there.

• Shows incoming calls to the United States instead of the city and the State

  IiPhone 6plus, IOS 10.  Incoming calls from unknown number of shows in the United States instead of / the State of the city. How can I fix this. Thank you

  Settings > general > language and region > region = 'United States'... assuming that is where you are.

• Apple Watch not advise with haptics during incoming calls

  Hi, my Apple Watch is not advising me with haptics for incoming calls. When I see the call on my phone and check my watch, I see appear on my Apple Watch face, but not with haptics the incoming call.

  I have the latest iOS on my iPhone 6 (9.3.4) and on my Apple Watch (2.2.2)

  Must be with the implementation in the application of Apple Watch, configure the options for the phone in the mirror?

  Hello

  It can help to use these settings:

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > Notifications > phone:
    • Choose custom.
    • Allow everyone to view alerts, sounds and Haptic.

• Cannot receive incoming calls

  Sometimes. All of a sudden. My phone is in my pocket and someone calls me. I see the cursor that is used to receive incoming calls. But when I slide, nothing happens. Seems that the screen was hung. I remember one day I've relied on the home button and then I could use the cursor and receive the call, but it worked for once. It's boring. I use 6s, latest iOS. Any solution please?

  Hey CoolBrain,

  I see that the phone app seems to be freezing when you attempt to drag in order to answer a call. Certainly, this is not an ideal situation, and I am happy to help you get on the path to solving this problem.

  Before you start, I would recommend that you back up your device either using iCloud or iTunes using the steps here:

  The backup of your iPhone, iPad and iPod touch - Apple Support

  After you back up your device, try to restart it at first to see if the problem persists when you receive a call. If the problem persists, try the steps here to force quit the application and try again:

  Force an application to close on your iPhone, iPad or iPod touch - Apple Support

  If the problem persists after trying the above steps, you will need to reinstall the application phone by restoring your iOS software in iTunes. Take a look at the following resources for more information on this process:

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  Once the restore is complete, try to test "set up in the new" to ensure that the problem does not persist. Once you have finished stable, you can follow the steps here to restore from your backup iOS:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

  Take care.

• How can I convert an incoming call read only an attachment so I can change it?

  How can I convert an incoming call reads only attachment so that I can change it? Save in Word does not it, and find research peut t.

  So, the problem seems to be that attachments are stored as files read-only by Thunderbird and an application it can open without editing privileges, so you cannot change the. Read-only mode was chosen because these files are kept in a temporary location. For example, if you modify and save the back, they are deleted when Thunderbird is closed, so losing your changes. The idea is to force to save you to a different location. You should be able to do it, then open it from that location with full editing capabilities.

  For a permanent change in this behavior, go in the [tools >] Options > advanced > general tab and click on Config Editor there. After you confirm the warning, copy - paste browser.helperApps.deleteTempFileOnExit into the search bar and switch false to true by double clicking on it. Now, saved attachments are created with read/write permissions, but is more removed when Thunderbird is closed (i.e., stored in % AppData%\Local\Temp).

• Starkey Halo 2 passes to 'Flow Boost' memory state when the iPhone received incoming calls.   Is it possible to change the setting.

  I just got my Halo 2 a few days ago Starkey.  I noticed that when I get incoming calls on my iPhone 6, Halo 2 switches in position of memory 'Stream Boost' that increases the volume and picks up a lot of background noise.  Is it possible to change the default iPhone meets the memory of another parameter memory.

  No, you should contact the developer of the application to this topic.