Transformer model Dyn11 necessary!

Similar Questions

• Anyone has a balun for multisim spice model?

  Why is there no balun in the component library?

  Thank you, if you have a.

  David B

  dbur,

  A balun is essentially a specialized transformer model.   As a good un bon resume summary of these types of baluns, please see this link:

  http://www.Minicircuits.com/pages/BalunApplicationNote.htm

  Since you can create an ideal transformer simply using sources controlled, attached is a balun 'Ruthroff' ideal, created from 2 ideal transformers (so it works in both directions) using the same technique.

  Using the modellers of Multisim (in Multisim PowerPro) or by creating these transformers with realistic values, it is possible to create SPICE balun transformer models ' real' models.   There are several previous messages which discussed the creation of models of processor to help you.

  http://forums.NI.com/NI/board/message?board.ID=370&message.ID=568&query.ID=503517#M568

  Kind regards

  Pat Noonan

  National Instruments

• How to create the sample Order Manager of Transformation (OTM) cartridge

  Hi all

  I tried quite pointless to create a cartridge OTM sample.

  I created a sample orchestration cartridge, and it has 2 functions: supply and FulfillBilling with a dependence on Provisioning for FulfillBilling inside a model completion Service.Voice.

  I created an example of template with the design template project, and it has created some entities by default like stocks and other stuff.

  First, I created a fixed domain in the conceptual model. Then added a product "Voice_PS". I have create a CFS called "Voice_CFS" under "Voice_PS" with a primary relationship. I added the fulfillment of coceptual model 'Voice_FP' product 'Voice_PS '.

  After that, I created MappingRule which I kept as a default because I haven't created any parameter of Voice_PS.

  Then I create the parameter bindings of controls and that I kept also by default because I didn't take all the parameters command line group specifications.

  Then I called design model to create a Service order. This gave me the sequence of Transformation and in the first step, I added simple context Type for parameter OLI ProductSpec = "Service.Voice."

  I use the same specification of element of order for the transformation of source and target texts. To do this, I checked the box «Model order» distributed support

  I created the processing Manager and mapped the area and the sequence of Transformation.

  After that, I marked the "Transformation Manager invoke" the Orchestration process verified and gave to the service provider that calculate the Service order.

  I pulled an order after you have configured all of this and I'm getting line continuation in the DEBUG log.

  < 22 January 2015 07:56:26, 289 PM IST > < DEBUG > < transformation. OrderTransformationManager > < ExecuteThread: "14" for queue: 'oms.ws.http' > < transformation OTM invoked with cartridgeId: 353, service provider: {OracleComms_Model_Base_Cartridge/1.0.0.0.0}Calculate_Service_Order, 3 points of order >}

  However if I open the order I can't control elements transformed under the control elements in the left panel.

  What I'm doing here wrong or missing?

  In the tab "Property references" specification of element of order there is also a field 'Order recognition Item property' which I mapped to a property returning my original ESP entity that was the Product "Voice_PS" entity

  However, I constantly get this error for her.

  < 23 January 2015 10:12:35, 832 IST AM > < WARN > < generation. XQueryEntityResolver > < ExecuteThread: "14" for queue: 'oms.ws.http' > < can't find the person identified by namespace = COM_SalesOrderFulfillment; name = Voice_PS; type = T = OrderItemParameterSpecificationType @http://xmlns.oracle.com/communications/ordermanagement/model>

  I have a feeling that the OSM requires no conceptual entity to this place but what it should be, that's what I don't get.

  Any little help will be welcome, because I feel really bad for the last 3 days.

  Hi all

  After almost a month to research on the OTM configuration, I was able to successfully create a cartridge with OTM.

  The thing is that oracle has tried several things to ensure that you do not work on OTM without taking training from Oracle University. However working for an Indian Council COMPUTER company, cost of training is something that approve all IT managers. So now I would like to register 4 things I was missing and which are very important for the configuration of the OTM: -.

  1. one thing that has not always been productSpecMapping.xml with the conceptual entities. This was achieved after dependence conceptual cartridge cartridge model fulfilment and realisation configuration and then the construction of the entire workspace. Reason for satisfaction was derived from this mapping.

  2. Although the DS is built as entities in the workspace are available for configuration, however, when you select the realization within the OSM entities the conceptual entities are not visible. Only if you bring a dependence of the cartridge to cartridge of the conceptual model to the OSM cartridge where you configure realization so only the conceptual entities begin to appear.

  So in my cartridge missed me 2 achievements. One was the realization of the conceptual model entity model fulfillment OSM entity fulmillment. Second has been the achievement of entity area conceptual funcational to the OSM order entity.

  3. the next thing that I configured and which was essential was 'container of entities in the common model. This tab appears on all files in all projects cartridge. Basically this allows you to select the project template that contribute to this project. As soon as I have it configured OSM began to detect OrderItemParameterSpecificationType entities.

  4. the wierdest configuration that I found was this one. After trying the previous point, I found that even if the entities are now be created, but again I was getting OrderItemSpecificationType entity not found. So I cheked in the cartridgeBuild folder to check what is created in the backend before deployment. I found that for some reason any was not Voice_PS but Voice_PSSpec. So I started concatinating "Spec" to all entities of the product in the order entering the property of recognition element OrderItemSpecification order. Please note that my order of recognition property point was not "Voice_PSSpec" but rather the value "qualifiedName" derived from the productSpecMapping.xml to the node with the value of the name attribute as "Voice_PS". For more information look at this post of me some time. OSM 7.2.4 cartridge

  And now my cartridge started grateful OTM. However I did a wrong configuration in order for transformed model controls inside functions so I quickly corrected and pulled another order. This time I could see the elements of order and turned the control elements. Phew! Finally his work.

  Now I spent enough time on this, I'd be happy to help those who are struggling to set up OTM.

  Kind regards

  Magalhaes

• OSB - How select variable used in the routing for buss request message. serv.

  I have "modeling of a stream of messages to a proxy service.
  According to the content of the incoming request message, a (conditional) branch is selected. The message must be routed to a business service in this branch.
  This service of the company has a different message definition requires that the proxy service. A kind of transformation is probably necessary. (not yet implemented)
  Question is how to choose what variable structure (I created a variable of Interface Service for business) that will be used during the call to the sales department.
  Only thing that I can choose, the service and operation.
  
  How to continue?

  The payload for the service of the company must be in the * variable $body. There are also other variables pre-defined as $header and $attachments that could make sense if your need to send SOAP headers or accessories for business service.

• 5 TB external USB 3 with Win XP

  The external drive of 5 to is announced for use with XP (as well as other versions of Windows). I have Windows XP (32 bit). I know this has a maximum of 2 TB. But the player is announced as being usable under XP.

  It is visible in Device Manager. It is not visible in disk management or Windows Explorer. It is visible under various partitioning programs, but only as a 2 to drive and I cannot create all partitions. I can not also assign a drive letter. So, I am unable to use it.

  How can I make it usable and create partitions which are visible and usable under XP?
  Thank you.

  The reason why you can not see the other 3 TB HARD disk, is that Windows XP does not support the GPT standard.
  The standard MODEL is necessary if you want to use partitions over 2 TB.
  The common MBR supports 2 TB max

  Please check this Microsoft document for more information:
  https://support.Microsoft.com/en-us/KB/2581408

  Possible solution: well, you could try to create several partitions)< 2tb)="" on="" this="" hdd…="" the="" smaller="" partitions="" would="" be="" recognized="" by="" win="" xp="">

• Satellite A300 - need a new graphics card driver to play the game

  Hello.

  I have a little problem,
  I have the game of simulation of tractor and I'll start the following error message:

  Error: Not impossible not init 3D System.
  Shader 2.0 model is necessary
  Please install the latest video drivers.

  I install some drivers on my computer, that I found on the Toshiba site, but still you can't and don't know what to do with it.

  Could someone help me please?

  Hello

  The error is obvious; the game can not start and run due to the graphic driver.
  I guess that you will need the most recent version.

  I think you should check your graphics card chip and search on some 3rd party pages for the other version of the Toshiba driver page driver driver won't help you.

  Good bye

• HP s5610f PC

  My HP s5610f PC no signal video past to my monitor (the VGA connection). Can I connect the monitor to the DVI using a VGA to DVI? What DVI model is necessary? My hope is that the DVI output has independent circuits of the VGA plug circuitry that may be defective. By connecting to the DVI Jack, I can be able to bypass the default.

  I'm not trying extreme remedies for any problem.  I found cause them more problems than they solve.

  Here is the original driver for the video.  Try to install to see if it helps.

• HP laptop G72: Battery only charge while turned off.

  Hello, employees and others on the forum, I have a problem with my laptop currently battery. Are examples.

  -Does not load when turned on, but cool when turned off.
  -Port charger LED flashes between orange and white when it is off. (Although, when turned on the orange blink.)

  I tried the method of discharge. (Disconnect the battery and Charger AC/DC, hold the power button / stop for about 30 seconds, then plug the battery back in and re-clogging the AC charger.) I had a problem with other methods, like I can't turn on the computer without the battery. I actually had this for 4 years and the warranty is already dissipated and it still works very well, except for the battery, so I don't want to lose, so if you could help me fix my laptop, that would be great! Thanks in advance if the problem is resolved.

  4 years is about the max for laptop battery life. However, it should run/work with even without battery. You seem to have a defective power adapter - they wear out too.

  Get your full model number or product and use it here to find the model of necessary power for your laptop adapter. Even if they don't have in stock, you should be able to find a way... Amazon, eBay, etc.

  http://PartSurfer.HP.com/search.aspx

  If you need help to find 'full' model number or see the instructions in the link product number >

  How can I find my model number or product number

• HP ENVY m6 problems audio / visuals

  HP ENVY m6-1117TX

  64-bit Windows 8

  My laptop worked perfectly well until the "HP Support Assistant" recommended I have install the updates. After installation a list of updates and restarting the PC I tried to play music via iTunes, but there was no sound and also was not going to the iTunes progress bar, iTunes is not frozen, I can click on songs and add files, etc. The only thing wrong with it is that it won't play sound and the progress bar will not move.

  I then went to VLC media player to view a video, but the video would not play at all, I tried to play the video through the video windows application 8 and I got an error message.

  "Can't play. Make sure that sound cards and video of your computer are working and have the latest drivers, and then try again.

  0xc00d11d1 (0x8007007e).

  I checked all the drivers through the Device Manager and everything is up-to-date. I can also go on youtube and watch a video without any sound or Visual problems at all. I have also connected my TV HDMI cable to my PC and iTunes worked perfectly when I was duplicating the screen.

  Hi all!

  I'm sorry that you use in this sound issue after updates from HP Support Assistant crossed! I definitely want to you all helping them solve this problem in particular because it seems to be updates that caused the problem. I need information well because it resembles what happens on different models.

  I will need to:

  (1) your product number (P/N). You can get that by pressing FN + ESC.

  (2) your BIOS version, found on this same screen information product. Search for "f. #' and let me know what it is.

  (3) your current version of the sound driver, found in Device Manager > sound, video and game controllers > properties > driver tab > version number.

  With this information, I can compare versions of driver to see if there are certain trends and offer you links to the best driver for your exact model if necessary.

  Someone at - he tried to uninstall the sound driver and restart the computer? Here are the steps.

  1. open Device Manager

  2. expand sound, video and game controllers

  3. double-click on IDT HD Audio to open properties

  4. click on the driver tab

  5. click on the button uninstall

  6. restart when you are prompted to. During the restart Windows will detect and reinstall the driver missing.

  Sometimes, this process of uninstallation/reinstallation can correct small glitches that happened during the update process. I'll keep an eye of responses

• Major of the system, need help maintaining win-7 against breaking

  In the next two weeks, I will undergo a complete upgrade of the system. My current computer began as a flag of hp (not sure of the exact model, if necessary I'll find it however) and I have since done several minor upgrades (added 8 GB of ram, changed the power supply from stock to a 750w coolermaster and put in a Sapphire radeon 6850 GPUS), now I will keep the same hard drive, ram PSU, gpu. I will change the motherboard (for a msi z77a-g45-thunderbolt), the processor (a 3750 Ivy bridge k i5 intel), the case (for a complete tour of the haf 932) and the heat sink (for a coolermaster hyper 212 plus), my current characteristics are

  Operating system

  Microsoft Windows 7 Home Premium 64 - bit SP1

  CENTRAL PROCESSING UNIT

  AMD Athlon II X 4 640

  Propus 45nm technology

  RAM

  12.0 GB Dual-Channel DDR3 @ 666 MHz (9-9-9-24)

  Motherboard

  FOXCONN 2AB1 (CPU 1)

  Graphics

  AMD Radeon HD 6800 series (Sapphire/PCPartner)

  Hard drives

  932GB Hitachi HDS721010CLA332 peripheral of SATA (SATA) drive

  Optical drives

  HP DVD a Beltway. DH16ABLH SATA CdRom

  Audio

  Realtek High Definition Audio
  As I said, I will keep the hard drive, however, I know that windows WILL break when he realizes that the mobo is different, I need to know how to fix driver problems, and how to keep win-7 registrant or re - record legally without having to buy another copy.
  more information
  When I bought the computer, windows is already installed and registered. Since then, I had to turn in the computer under warranty to hp once (for a dead motherboard) the motherboard was replaced, and my data have not changed. I still have to perform the upgrade (and won't for another 2 weeks or more), so I have full access to the data.

  If you replace the motherboard of the system won't accept or if it does not, turn on period.

  You have an oem version of win provided by its only valid for the origonal hardware HP, namely the motherboard.

  If you want to upgrade the major component of a PC, the motherboard, buy a commercial version of victory

• Required fields

  Given:

  form with several fields of text entry.

  the value of LOV some fields becomes invalid - not required for the operation.

  To submit:

  pl/sql procedure takes values of all the elements and, based on the values passed did he magic.

  Problem:

  required fields are marked as "required" in the apex. When LOV disables them, of course, they have a value, and a problem during "submit page" (e.g..

  "First Name must have some value. »).

  I'm hesitant to mark all items as 'non-compulsory' unceremoniously since all the elements are necessary (when they are activated by LOV) and the Red "*" is a good way to remind a user to enter a value.

  What would be a better solution?

  hope it makes sense

  P.S. help to 'Value' for the element leads to believe that 2 conditions must be met so that automatic checking of ' not null ' kick - point must be visible and '' necessary '' status = "YES". This is not true. required = yes and "point invisible triggers still control null nit.

  AZZ,

  You can set the attribute 'Required value' = 'No' and let the model as "Necessary", it will show the "*" when the element is visible. Then you can create a new type Validation "IS NOT NULL" to a Condition of ' Item = value '.

  Thank you

  Erick

• How to change the published processor?

  Hello

  I have some basic questions. I have a processor of publishes. Now, I want to add two more at the beginning of the published processor processor? I'm not able to tie them up or bind. What are the steps to add the processor at the beginning? I can change him publishes the processor between the two.

  Thank you

  It depends on if you use the reference or the transformer model is published. Processors of reference updates all instances when rereleased. Model will not.

  Yes, it would be better if we could easily support the addition of new processors at the beginning, but it is simple to start with a dummy processor whenever you make one so that you don't hit this problem.

• Insert node xmltype

  He said this support oracle xml db xquery 1.0 and xquery update 1.0.

  I want to insert a node in the xmltype column.

  My like this xmltype column:

  < + photos >

  < default pic = "yes" >

  < master > 1.jpg < / master >

  1_thumb.jpg < go > < / inch >

  < / pic >

  < pic >

  < master > 2.jpg < / master >

  2_thumb.jpg < go > < / inch >

  < / pic >

  < pic >

  < master > 3.jpg < / master >

  3_thumb.jpg < go > < / inch >

  < / pic >

  < pic >

  < master > 4.jpg < / master >

  4_thumb.jpg < go > < / inch >

  < / pic >

  < / photos >

  My update sql like this: (the xmlquery is see xquery update 1.0)

  Update t set t.info XML = xmlquery ('declare variable $e: = $d / / pic [last ()]; insert $e into node $d/pics ' PASSING t.info have "d" RETURNING CONTENT) where t.id =: id and t.info is not null

  It went wrong: ORA-18150

  There is little reference to the update of xquery sql introduction.

  He said this support oracle xml db xquery 1.0 and xquery update 1.0.

  XQuery Update is available since version 11.2.0.3, but only the "transform" model of treatment is supported:

  SQL> with txml (info) as (
    2    select xmlparse(document
    3  '
    4    
    5      1.jpg
    6      1_thumb.jpg
    7    
    8    
    9      2.jpg
  10      2_thumb.jpg
  11    
  12    
  13      3.jpg
  14      3_thumb.jpg
  15    
  16    
  17      4.jpg
  18      4_thumb.jpg
  19    
  20  ')
  21    from dual
  22  )
  23  select xmlserialize(document
  24           xmlquery(
  25             'copy $d := .
  26              modify (
  27                insert node $d/pics/pic[last()] into $d/pics
  28              )
  29              return $d'
  30             passing t.info
  31             returning content
  32           )
  33           indent
  34         )
  35  from txml t;
  
  XMLSERIALIZE(DOCUMENTXMLQUERY(
  --------------------------------------------------------------------------------
  
    
      1.jpg
      1_thumb.jpg
    
    
      2.jpg
      2_thumb.jpg
    
    
      3.jpg
      3_thumb.jpg
    
    
      4.jpg
      4_thumb.jpg
    
    
      4.jpg
      4_thumb.jpg
    
  
  

  There is little reference to the update of xquery sql introduction.

  XQuery and Oracle XML DB

  Querying and updating of XML data

  Best practices for XQuery in Oracle Database 12c

• Processing ESD BEEP output file

  With the help of EDD, can you put a time stamp date on the Transformation output file?

  After some research response were found in:

  http://docs.oracle.com/cd/E26228_01/doc.93/e21959/ch_ww_imp_exp.htm#BCEHIFCG, section 4

  File names are not case-sensitive. The import/export file name can contain substitute values, as follows:

  • @USER = this text is replaced by the user ID. the task
  • @DATE = this text is replaced by the work date in the YYYY-MM-DD format.
  • @TIME = this text replaced by the working time in the format HH-MM-SS.

  On the Transformation model, add the file name.  In this example, @Date.

  Output file... [email protected]

• Hi, by cutting out shapes?

  Hi guys, im in middle of a few data driven grapcics, receive a circular putting txt file .png files in a replacement for pixel layer which is circular, himself. When to cut the png I could use the circle tool.  Now I have a shield shape, I want to fill it with an image, so I think I need to cut out a shape of shield of each image, but im not sure how to do this. a soon m

  I guess, what you wrote, the shield is a pixel image.

  If so, make a selection of the protection zone in which you want to place an image.

  Open the image and select > all followed by Edit > copy

  Back to the shield and Edit > Paste Special > paste into

  Then edit > transform > fit, if necessary. If the scaling, hold down the SHIFT key to keep the proportion.