Transitional attribute of VO and immediate property works only together

Similar Questions

• WSUS 3.0 SP2 and Windows 7 works only together... "unpublished".

  good then it gives me a bit of a nightmare.

  I have a 2008 r2 with WSUS 3.0 box setup; my vista and xp clients connect with happiness and go about their business update.

  All Windows 7 clients in the Organization have failed. It comes to systems running the same SOE but also covers systems running manual install of Windows 7, this verisons them Professional and windows 7 32 bit Enterprise.

  So it is a big business problem. I first tried all the traditional methods, such as installing manually windows update version 7.4.7600.226 agent on my clients windows 7, I simply get an error message stating "Setup of the Windows Update Agent met with a fatal error.

  I tried to rename c:\Windows\SoftwareDistribution folder, then restart the service of wu. Honestly, I think that this issue is also that as the number of computers, it's also affecting.

  I also tried to manually replace all files windows agent update 7.4.7600.226 on a windows 7 the problem with system. If I look at the WSUS console, he gets the change of 7.3.7600.16385 to 7.4.7600.226 version but it is not help me solve the problem. If I look in my WSUS console I see all XP/VISTA machines are running 7.4.7600.226 and they work perfectly. Windows7 machines ALL running 7.3.7600.16385 and all fail with '8008005' and showing the same problems in windowsupdate.log

  On windows 7 clients if I try manually pushing an update, I get the error code ' 8008005' and in the WSUS console, he continues to show yet to be reported.»

  I have included a summary of a file windowsupdate.log among machines of affect.

  ------------

  2010-07-07 10:04:18:862 900 b60 Misc = logging initialized (build: 7.3.7600.16385, tz: + 0930) =.
  2010-07-07 10:04:18:880 900 b60 Misc = process: C:\Windows\system32\svchost.exe
  2010-07-07 10:04:18:880 900 b60 Misc = Module: c:\windows\system32\wuaueng.dll
  2010-07-07 10:04:18:862 900 b60 Service *.
  2010-07-07 10:04:18:880 900 b60 Service * START * Service: Service startup
  2010-07-07 10:04:18:880 900 b60 Service *.
  2010-07-07 10:04:18:956 900 b60 Agent * WU client version 7.3.7600.16385
  2010-07-07 10:04:18:956 900 b60 Agent * Base Directory: C:\Windows\SoftwareDistribution
  2010-07-07 10:04:18:957 900 b60 Agent * access type: no proxy
  2010-07-07 10:04:18:957 900 b60 Agent * network state: connected
  2010-07-07 10:05:04:111 900 CWERReporter::Init b60 successful report
  2010-07-07 10:05:04:112 900 b60 Agent * Agent: initialization of Windows Update Agent *.
  2010-07-07 10:05:04:112 900 b60 Agent * Agent: initialization of the global parameters cache *.
  2010-07-07 10:05:04:112 900 b60 Agent * WSUS server:http://spcfsv001.contoso.internal
  2010-07-07 10:05:04:112 900 b60 Agent * state WSUS server:http://spcfsv001.contoso.internal
  2010-07-07 10:05:04:112 900 b60 Agent * target group: (Unassigned Computers)
  2010-07-07 10:05:04:112 900 b60 Agent * Windows Update access disabled: No.
  2010-07-07 10:05:04:122 900 b60 DnldMgr Download manager restoring 0 downloads
  2010-07-07 10:05:04:123 900 b60 to THE # to THE: initialization of automatic updates.
  2010-07-07 10:05:04:124 900 b60 to THE timeout parameter next detection at 2010-07-07 00:35:04
  2010-07-07 10:05:04:124 900 b60 to THE # WSUS server:http://spcfsv001.contoso.internal
  2010-07-07 10:05:04:124 900 b60 detection frequency to THE #: 22
  2010-07-07 10:05:04:124 900 b60 to # approval type: on demand (political)
  2010-07-07 10:05:04:124 900 b60 to THE # scheduled install date and time: every day at 17:00
  2010-07-07 10:05:04:124 900 b60 to THE # automatically install minor updates: Yes (user preference)
  2010-07-07 10:05:04:125 900 b60, the phase of installation to THE adjustment to THE planned at 2010-07-07 07:30
  2010-07-07 10:05:04:553 900 b60 report * report: initialization of static data to report *.
  2010-07-07 10:05:04:553 900 b60 report * OS Version = 6.1.7600.0.0.65792
  2010-07-07 10:05:04:553 900 b60 report * OS Product Type = 0 x 00000004
  2010-07-07 10:05:04:590 900 b60 report * computer brand = Gigabyte Technology Co., Ltd..
  2010-07-07 10:05:04:590 900 b60 report * computer model = G31M-ES2C
  2010-07-07 10:05:04:595 900 b60 report * Bios revision = CF
  2010-07-07 10:05:04:595 900 b60 report * name of Bios = BIOS Award Modular v6.00PG
  2010-07-07 10:05:04:595 900 b60 report * the Bios Release Date = 2009-07 - 02 T 00: 00:00
  2010-07-07 10:05:04:595 900 b60 report * locale ID = 3081
  2010-07-07 10:05:04:741 900 AU b60 successfully wrote event to THE health state: 0
  2010-07-07 10:05:04:741 900 b60 to THE initialization feature updates
  2010-07-07 10:05:04:741 900 b60 to THE Found set 0 cached updates featured
  2010-07-07 10:05:04:742 900 AU b60 successfully wrote event to THE health state: 0
  2010-07-07 10:05:04:742 900 AU b60 successfully wrote event to THE health state: 0
  2010-07-07 10:05:04:742 900 b60 to THE delayed finish to initialize
  2010-07-07 10:05:04:743 900 b60 to THE #.
  2010-07-07 10:05:04:743 900 b60 to THE # START # to THE: research updates
  2010-07-07 10:05:04:743 900 b60 to THE #.
  2010-07-07 10:05:04:798 900 AU b60<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">
  2010-07-07 10:05:04:798 900 d94 Agent *.
  2010-07-07 10:05:04:798 900 d94 Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
  2010-07-07 10:05:04:798 900 d94 Agent *.
  2010-07-07 10:05:04:798 900 d94 Agent * Online = No; Ignore download priority = No
  2010-07-07 10:05:04:798 900 d94 Agent * criteria = "IsInstalled = 0 and DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and 'Installation' and = 1 RebootRequired = DeploymentAction or IsInstalled = 0 and DeploymentAction = 'Uninstall' and RebootRequired = 1".
  2010-07-07 10:05:04:798 900 d94 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
  2010-07-07 10:05:04:798 900 d94 Agent * Search Scope = {Machine}
  2010-07-07 10:05:04:890 900 d94 Agent * found 0 updates day and 0 categories in the search. rules of RCT evaluated 0 out of 0 deployed entities
  2010-07-07 10:05:04:892 900 d94 Agent *.
  2010-07-07 10:05:04:892 900 d94 Agent * END * Agent: finding updates [CallerId = AutomaticUpdates]
  2010-07-07 10:05:04:892 900 d94 Agent *.
  2010-07-07 10:05:04:892 900 AU d98 > # RETURN # to THE: research updates [CallId = {A8468B2E-C141-44E3-9D88-17395E6367F8}]
  2010-07-07 10:05:04:892 900 d98 at # 0 updates detected
  2010-07-07 10:05:04:892 900 d98 with THE #.
  2010-07-07 10:05:04:892 900 d98 to # END # in THE: research updates [CallId = {A8468B2E-C141-44E3-9D88-17395E6367F8}]
  2010-07-07 10:05:04:892 900 d98 with THE #.
  2010-07-07 10:05:04:892 900 d98-notifications to THE present is disabled.
  2010-07-07 10:05:04:892 900 d98 phase of installation to THE adjustment to THE planned at 2010-07-07 07:30
  2010-07-07 10:05:04:892 900 AU d98 successfully wrote event to THE health state: 0
  2010-07-07 10:05:04:893 900 AU d98 successfully wrote event to THE health state: 0
  2010-07-07 10:05:04:893 900 b60 to THE #.
  2010-07-07 10:05:04:893 900 b60 to THE # START # to THE: research updates
  2010-07-07 10:05:04:893 900 b60 to THE #.
  2010-07-07 10:05:04:894 900 AU b60<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">
  2010-07-07 10:05:04:894 900 d94 Agent *.
  2010-07-07 10:05:04:894 900 d94 Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
  2010-07-07 10:05:04:894 900 d94 Agent *.
  2010-07-07 10:05:04:894 900 d94 Agent * Online = Yes; Ignore download priority = No
  2010-07-07 10:05:04:894 900 d94 Agent * criteria = "IsInstalled = 0 and DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and 'Installation' and = 1 RebootRequired = DeploymentAction or IsInstalled = 0 and DeploymentAction = 'Uninstall' and RebootRequired = 1".
  2010-07-07 10:05:04:894 900 d94 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
  2010-07-07 10:05:04:894 900 d94 Agent * Search Scope = {Machine}
  2010-07-07 10:05:04:894 900 d94 Setup looking for agent SelfUpdate
  2010-07-07 10:05:04:895 900 d94 configuration version Client: Core: 7.3.7600.16385 to the: 7.3.7600.16385
  2010-07-07 10:05:04:904 900 d94 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
  2010-07-07 10:05:04:940 900 d94 Misc Microsoft signed: Yes
  2010-07-07 10:05:07:198 900 d94 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
  2010-07-07 10:05:07:202 900 d94 Misc Microsoft signed: Yes
  2010-07-07 10:05:07:240 900 d94 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
  2010-07-07 10:05:07:260 900 d94 Misc Microsoft signed: Yes
  2010-07-07 10:05:07:269 900 d94 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
  2010-07-07 10:05:07:273 900 d94 Misc Microsoft signed: Yes
  2010-07-07 10:05:07:372 900 d94 Setup determine whether a new configuration manager should be downloaded
  2010-07-07 10:05:07:372 900 d94 Setup Manager SelfUpdate is not found.  It will be downloaded
  2010-07-07 10:05:07:372 900 d94 Setup assessment applicability of the installation package ' ActiveX-SelfUpdate-WUClient ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226;
  2010-07-07 10:05:37:646 900 d94 installation caveat: Cbs StartSession, error = 0 x 80080005
  2010-07-07 10:05:37:646 900 d94 Setup FATAL: assessment of the applicability for installation package "ActiveX-SelfUpdate-WUClient ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226 ' has failed, error = 0 x 80080005
  2010-07-07 10:05:37:646 900 d94 Setup FATAL: SelfUpdate check failed, err = 0 x 80080005
  2010-07-07 10:05:37:647 900 d94 Agent * WARNING: jump scan, self-update check returned 0 x 80080005
  2010-07-07 10:05:37:647 900 d94 Agent * WARNING: exit code = 0 x 80080005
  2010-07-07 10:05:37:647 900 d94 Agent *.
  2010-07-07 10:05:37:647 900 d94 Agent * END * Agent: finding updates [CallerId = AutomaticUpdates]
  2010-07-07 10:05:37:647 900 d94 Agent *.
  2010-07-07 10:05:37:647 900 d94 Agent WARNING: customer WU didn't search for the update with error 0 x 80080005
  2010-07-07 10:05:37:647 900 AU d98 > # RETURN # to THE: research updates [CallId = {0A71D3FE-B9BC-4B73-B7A2-AC3787D8D9E4}]
  2010-07-07 10:05:37:647 900 d94 report REPORT EVENT: 10:05:04:742 2010-07-07 + 0930 1 202 102 {1E3A0E26-9FB7-42F0-8DA5-99C3D5CCC453} {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates content success installation reboot completed.
  2010-07-07 10:05:37:647 900 d98 to # WARNING: reminder of search failed, result = 0 x 80080005
  2010-07-07 10:05:37:647 900 d98 to # WARNING: could not find updates with error code 80080005
  2010-07-07 10:05:37:647 900 d98 with THE #.
  2010-07-07 10:05:37:647 900 d98 to # END # in THE: research updates [CallId = {0A71D3FE-B9BC-4B73-B7A2-AC3787D8D9E4}]
  2010-07-07 10:05:37:647 900 d98 with THE #.
  2010-07-07 10:05:37:647 900 AU d98 successfully wrote event to THE health state: 0
  2010-07-07 10:05:37:647 900 d98 with THE timeout parameter next detection at 2010-07-07 05:35:37
  2010-07-07 10:05:37:647 900 d98 phase of installation to THE adjustment to THE planned at 2010-07-07 07:30
  2010-07-07 10:05:37:648 900 AU d98 successfully wrote event to THE health state: 0
  2010-07-07 10:05:37:648 900 AU d98 successfully wrote event to THE health state: 0
  2010-07-07 10:05:37:670 900 d94 report CWERReporter finish event management. (00000000)
  2010-07-07 10:05:42:629 900 d94 report REPORT EVENT: 10:05:37:646 2010-07-07 + 0930 1 148 101 {A4993B4F-7329-405D-8435-093B74B867B1} {61CA813A-7585-442E-A66B-B0D15CE6BDC0} 1 80080005 SelfUpdate software failure synchronization Client Windows Update not found with error 0 x 80080005.
  2010-07-07 10:05:42:672 900 d94 report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2010-07-07 10:05:42:672 900 d94 WER sent report: 7.3.7600.16385 61CA813A-7585-442E-A66B-B0D15CE6BDC0 0 x 80080005 Scan managed 101
  2010-07-07 10:05:42:672 900 d94 report CWERReporter finish event management. (00000000)

  ------

  any suggestions or advice would be so greatly appreciated...

  Thank you all

  Right Church wrong Pew.

  Specific WSUS Forum: http://social.technet.microsoft.com/Forums/en-US/winserverwsus/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My backspace and delete key work, only on facebook and forms

  twice now and it only seems to happen on facebook, my backspace key only erases the last character I type no where I place the caret and intend to remove. Also and again only on facebook, my delete key does not work.

  I deleted and cookies and temporary files

  Ive reset my account twice now and it will work for one day, but after then it will start again
  (someone told me it might be because of my add on and if sometimes I disabled all my add on and again finally had the problem with in a few days)

  Ive even changed the configuration of 0 to 2.

  Help, please. I don't want to go back to Chrome
  Still nothing. This is the first time that he has ever done that and it happened only after the recent updat

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Pavilion Slimline: Printer and Webcam not working only not with Pavillion Slimline, Windows 8

  I'm writing to a friend... None of us is particularly in computer science.

  Recently, his computer had to be replaced; so, she bought a used HP Pavilion Slimline, 400-034 PC with Windows 8 OS (not sure that all the operating system to 64-bit... just guessing).  The PC seems to work very well; However, with its previous system she used a printer (HP 7410 All in One) and a webcam (HP-HD-HD3110 & HD 3100).  She can't get either auxiliary to work devices.  Can anyone tell me if these components are compatible and that, if so, wherever it can access drivers or other software that may be required.

  Also, would you recommend that she has first upgrade to Windows 10?

  Thank you

  Terry

  Hello Terry,

  A Windows 8 driver must be installed to use the printer on the new PC.

  You can either upgrade to Windows 10 or not, the printer is compatible with both operating systems and it is a matter of personal preference...

  For 7410 printers, drivers can be downloaded from the following link:

  http://ftp.HP.com/pub/softlib/software13/COL31015/MP-110171-4/Full_Webpack-140.0.408-5-AIO_CDB_FSW_Full_Win_WW_140_408-5.exe

  Note: If the printer is connected to a USB port, unpulg the cable from your PC now.

  In the devices Panel and printers and select remove device for the icon of the printer before installing the software.

  Regarding the HP Webcam, I'm afraid that it's incompatible with Windwos 8.1 or Windows 10, it is only supported on Widnows 7 or earlier operating systems:

  http://support.HP.com/us-en/product/HP-Web-cameras/4172393/model/4172477/document/c03162257#AbT1

  You try to install the drivers for Windows 7 by using Compatibility Mode (download the file to your computer, right click and select Troubleshoot Compatibility and then follow the steps on the screen) but it has never tested on Windows 8 or 10 and if it works not you replace the webcam with a model more late which is compatible with the operating system.

  http://ftp.HP.com/pub/softlib/software12/COL46174/da-112023-1/HPWebcamSoftwareSuite_3100_3110.exe

  Kind regards

  Shlomi

• Equium A110-233 stops using the WiFi and the fans work only 3 sec

  I bought an A110 - 233 20/09/06. It works very well for about 1 hour then it interrupts the communication via the wireless network connection status States he is always connected, sometimes but not always the configuration window indicates that the without wire is cut and I should turn it on at the bottom of the window (there is lit) processor Intel Pro.

  I brought the world PC waiting for a replacement but I had to sit for an hour trying to reproduce the error, we couldn't go wrong but I have discovered that it does only when running on the network.

  Cooling fan only works for 1-3 seconds at a time, is it possible to increase this number.

  Any help would be appreciated
  Bob

  Hello

  If you want to change the properties of cooling module you must do in the standby power settings.
  You should know that the energy saver uses different modes of consumption. The laptop is using another mode of energy if the AC adapter is plugged and another mode of power if the laptop works only with the battery.
  On the basis of energy saver menu, you will be able to change the method of cooling. This option controls the fan.

  It is not easy to solve the problem of WLAN communication. I mean that there is no general solution. Additional it is not easy to solve because the issue doesn't happen always, but sometimes only. Perhaps the intensity of the signal is sometimes lower and therefore, the configuration software WLan Intel reports that the wireless network is turned off.

  In addition, you should also check the Wlan card properties. You will find that the properties in Device Manager-> right click on the wireless network card.
  Here, you must select the Advanced tab.
  You should find a few interesting options such as energy saving (disable) or the strength of the signal (enable).

  In addition, you can try to update the WLan driver. Maybe a new version is available.

  By the way: you should also know that some 3rd party application could have a bad influence on WLan communication.

• Is it possible to shut down the computer, close a current program and save your work, only using hotkeys in Windows?

  original title: Keyboaed shortcuts?

  Hello, anyone know how to stop the computer, close the current program and save the work using only the keyboard in Vista Home premium?

  Thank you for your time and efforts to this issue.

  Kind regards

  Jazzie5.

  Hello jazzie5,

  In addition to what Tom SC suggested, you can close a window or the current program by pressing Alt + F4.

  The common shortcut for recording of the work is CTRL + S. I advise to use this command before you press Alt + F4 to close the program, although many programs will prompt to save your work if you do this before you save it manually.

  Bonus keyboard shortcuts:

  Task Manager: Ctrl + SHIFT + ESC

  Close the tab in the browser: Ctrl + W

  Switch between tabs in the browser: Ctrl + Tab

  Let us know if you have any other questions!

• Copy and paste not working only not on a new installation of Windows 7.

  Hello

  My copy and pasting worked very well after that installation, and all of a sudden, it stopped working. I have no change at all. Just work away suddenly stopped. Windows 7 is less then 24 hours on my laptop, and I've already found a problem :-(

  How can I fix it?

  A

  What are you trying to copy and paste, that specific type and the method of copy and paste already worked on this machine?

  Take a look at the related posts under "Related topics" to the right of these responses.

  Help please! I can't use the copy & paste!
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/e04cc6b7-cb95-4e24-b69f-5857eb3fea01

  Give the system a restore go, you will need to only go back to a time that was before when the problem occurred.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  There are a couple of settings that are semi related to what you would like to check.

  Take a look on a right click on the Start button or the taskbar and selecting Properties / Start Menu / customize / 'activate context menus and drag and drop.

  Also look at IE / tools / security / custom level / 'drag or copy and paste files ".

  What type of pointing device (mouse, Touchpad) you use you can use an alternative one?

  Copy / paste works fashion without failure or Normal Mode with another user if you create one?

  Vista (or 7) Advanced Startup Options
  http://Techblissonline.com/Vista-advanced-boot-options/

• Slow down and mix the effect works only together

  Hello

  I have 2 footages from 2 different cameras that recorded the same event and I use Premiere CS6.

  I each sequence of a video track and slow them down to 40%. So I want to use the mixing effect, so in the last third of a scene, the other comes into play, since the camera 2 was set for a close shot.

  However, although mix effect works fine with scenes that are in the original speed, I couldn't make it work when the speed is changed! It seems that it goes with a totally different clip - that exists in the timeline and is in the same way that I wanted to stage 2 to blend.

  For the moment I change the speed setting (or time-remapping), loses the stage 2, in which I applied the effect mix, is the reference for scene 1.

  Any thoughts on how mix slowed the scenes without having to export the first slowed then merger of the output files?

  Thank you!

  I see that there is certainly a problem. I put one clip on another and used the mix to 50%. Worked well. I changed the two clips to 40%, and the clip with the effect looks like it's on the frame to hold on to the last image. A bug for sure.

  Perhaps you'd be happier with a cross dissolve transition between the two elements? At least until the bug is fixed. I suggest that you put in a bug report. I'll do the same.

• Continuity and iMessage synchronization works only on iPhone... not!

  I always be using iMessage and continuity of receive/make calls on all my devices iOS and Mac (all updated to the latest iOS/OSX).

  Recently, I noticed that even if iMessage works on all devices, iMessages are synchronized nor on my iPhone. That is, some iMessage I write on my iPhone that stays on my iPhone and don't appear on my Mac and on my iPad, everything I write on my Mac or iPad, he synchronized between the two devices except my iPhone.

  Phone calls cannot be forwarded to my iPhone from my iPad or Mac more.

  All settings look okay.

  Any help please?

  Hello Jet787,

  Thank you for using communities of Apple Support.

  I see that are not messages that you do on your iPhone to your Mac and your iPad and your Mac messages do not appear on your iPhone.  I would like that you first make sure that your phone number is configured on all your devices and make sure that it is the method that you use to send and receive your iMessages.

  Add or remove your phone number to iMessage or FaceTime on your Mac, iPad, and iPod touch

  Take care.

• Z51 LENOVO MOUSE AND KEYBOARD NOT WORKING ONLY NOT AT THE SAME TIME

  I know this question has been asked before, but these solutions do not work for me.

  I just got my new Lenovo z51 80k60030us and I quickly put a game on it just to test the waters. has worked well. However, I can't move (using the keyboard) and look around (using the mouse) at the same time. I looked everywhere on the internet and realized that it was something to do with the 'follow-up to the Palm trees", but nobody has the solution for my specific problem of keyboard and mouse. When I try and change the options of the mouse on lenovo, it is grayed out. I tried everything to ungray it, but I have yet to succeed. help please?

  Try using a new generic Synaptics driver?

  http://www.station-drivers.com/index.php?option=com_remository&Itemid=352&func=FileInfo&ID=1602

• Microsoft Security Essentials and Windows Defender works not together

  I've recently switched to Microsoft Security Essentials, I it works on Windows Vista, but now Windows Defender is turned off.  If I try to 'start' Defender window freezes and it keeps just who goes back to the window where I would start from.  These two programs are not compatible?

  I've recently switched to Microsoft Security Essentials, I it works on Windows Vista, but now Windows Defender is turned off.  If I try to 'start' Defender window freezes and it keeps just who goes back to the window where I would start from.  These two programs are not compatible?

  If you have Microsoft Security Essentials, AVG, McAfee, Norton, etc. installed, they have a conflict with Windows Defender, or turn it off.

  Microsoft Security Essentials has its own integrated version of the defender and it automatically disables the version of Vista in Windows Defender.

  If it's not:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Turn Windows Defender on or off the information on the link above of Microsoft.

  Hope the above explains the common compatibility issues with Windows Defender and other security programs.

  See you soon.

  Mick Murphy - Microsoft partner

• Mouse and keyboard not working only not to the login screen

  Hi, I was recently infected with Antispyware Soft virus. In my attempt to remove it, my screen went black, so I had to restart my computer. Entering my login screen, I was unable to connect because my keyboard and mouse no longer works. I tried to start the safe mode too and they still do not work on the login screen. However, they work at the start of the BIOS. I looked around, but I couldn't find any option for Legacy USB drivers. I went to a few USB option and select [Enabled] and it still doesn't work to the login screen. I have no PS2 port, so I can't try it. I was also able to use my mouse and keyboard when you attempt a repair of the system to do a system restore, but that solves nothing. I am at a loss what to do. I hope someone is late, as I'll be gone tomorrow/more day late today. I am writing a computer laptop and unable to remember any care my office except the fact, it's Windows Vista.

  Hi HellMuT1,

   
  We recommend to use a different mouse and keyboard, then check the result. If the problem persists, try the following steps.
  1. Insert Windows Vista DVD.
  2. restart your computer.
  3. let the computer restart (boot) from the DVD.
  4. If you are prompted, press a key to continue.
  5. When you reach the screen install Windows, select your preferences in the language to install, time and currency format and keyboard or input method boxes, and then click Next.
  6. do not click on install now. Instead, click on repair your computer. The System Recovery Options dialog box appears.
  7. make sure that the appropriate operating system is selected, and then click Next.
  8. After you click Next, the System Recovery Options menu appears.
  9. click on command prompt.
  10. type devmgmt.msc and press enter
  11. on the window Device Manager, in the object list, expand mice and other pointing devices.
  12. make a right click the sub element and click on uninstall.
  13 expand keyboards.
  14. make a right click the sub element and click on uninstall.
  15. Type exit and press ENTER to restart the computer.
  16. remove Vista DVD and restart the computer to see if the keyboard and mouse works fine.
   
  Do the repairs to the system of Windows recovery environment
  I hope this helps.

   

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Mouse and keyboard not working only not with the ERD in Windows 7 and Windows 7 install disc

  I have a Dell XPS 8700.  I just did an upgrade to an SSD.  The DSS started once with no problems, then it wouldn't start.  I get an error message 1 MBR.

  If I do a F12, I am able to boot from the SSD drive and everything works fine, but if any process requires a reboot it will not work.  IE, windows update that requires a restart does not update because it cannot restart.

  To fix the MBR, use either the repair or install disk to get to the command line.  I have two drives and when I boot with them I get the initial screen of language/keyboard and mouse and keyboard do not work.  I have the keyboard and mouse installed in USB 2.0 ports, their was also in 3.0 ports with the same results.  They work fine until the disc over to install the files, and then they die.  I tried 2 different sets of keyboards and mice with the same results.

  I also tried to use the Dell recovery disk and it did find and supposed to solve a problem when I ran in the beginning.  But I still get the MBR error.  The disc is represented and it did not find any problems and I wanted to reinstall windows back to the factory.

  Suggestions as to how to get my mouse and keyboard work again with the repair and install discs would be greatly appreciated.

  Hi Navneet,

  Thank you for responding.

  Did you change the computer other than the upgrade to an SSD?

  Yes, I have, but that was before the SSD.  I upgraded the video card and added a 1 TB of HARD drive data.

  What is the complete error message you get on the MBR?

  The message reads as follows;

  "MBR 1 error.  Press any key to boot from floppy. »

  There is no floppy drive installed and I even tried to start with only the connected SSD.

  Are you an error code?

  No error code.

  As for changing the BIOS, I am not satisfied with messing with the BIOS, if this isn't an option.

  After thinking about this problem, I think that Dell has disabled somehow able to use disc repair/install "Windows".  I say this because they have disabled the ability to create a disk to repair Windows out of the Dell system and cannot create a Dell recovery disk.  Also because Dell has changed the MBR it wouldn't do any good to reset the MBR to the default value of Windows and the Dell recovery disk does not give you the ability to recover the MBR manually only.

  I decided that the best option was to do a clean reinstall of the OS, and that's what I did.  Everything works great for now.   It is a PITA, but nothing that I have not done before.

  Thanks again for your help...

  Mahalo,

  DEX...

• At the opening of the various programs I get the error message 'extended attributes are incompatible' and "Consent UI has stopped working" in windows vista.

  Original title: extended attributes

  I started getting the following errors with various programs "extended attributes are incompatible" and "Consent UI has stopped working". I tried to do a system restore but get error inconsistent attributes for 'rstrui.exe '. I also had the message to ShellExecuteEX.exe when you try to install an application and even trying to download the Windows 7 Upgrade advisor. Just to check, I tried to run msconfig from the start and even gives me the message attributes. I am running Vista Home Premium with Service Pack 2 installed. Advice please. Thank you, Roger P

  Hi Roger P.

  ·         When the issue started?

  ·         Remember to make any hardware or software comes to the computer before this problem?

  ·         What antivirus application is installed on your computer?

  Method 1:

  You can try to run a SFC scan and check.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I suggest you to follow these steps and check if that helps.

  Methoad 2: try to run the windows recovery option system restore.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  It could be useful!

• call a stored procedure for each row in the transitional attribute and display the data in the form of af: table. The other rows are based on the entities

  Hi Experts,

  JDeveloper 12.1.3.0.0

  I have a VO based on entity object. With a column of the VO is transient attribute (I created).

  I need to call a stored procedure for each row in the transitional attribute and display the data in the form of af: table. As well as other attributes.

  So can anyone suggest how can I achieve this?

  Thank you

  AR

  I think that you need a stored function (which returns the value) in this case, is not?

  Take a look at:

  https://docs.Oracle.com/CD/B31017_01/Web.1013/b25947/bcadvgen005.htm

  and search for:

  Invoking stored function with only Arguments in

  call your function in the Get attribute and return value accessor...