Translator driver GPIB

Similar Questions

• install driver GPIB Windows 7 x 64

  I try to install the latest driver GPIB 2.7.3 for a GPIB-USB-HS on Windows 7 64 bit. The Setup is for multiple OS, including Windows 7 32-bit and 64-bit. When I try to install it, the installation program indicates (x 86) C:/Program Files /... When I try to force C:/Program Files /... Windows itself refuses because the software is not compatible.

  Question: the pilot include a 64-bit version or is a 32-bit version that is compatible with Windows 7 64 bit?

  Question: If the installer has a 64-bit version, can I choose which of these versions, it installs?

  Question if the installer has a 64-bit version / and selects this option by default for Windows 7/64 bit, what's not

  solved for a simular to NIDAQmx question in another forum

• Error of Driver GPIB-USB-HS - 10 possibly after Feb Windows Update Windows

  Starting from 17/02/2016, GPIB-USB-HS material (2) is no longer connecting on 10 of Windows using NI488.2 Rev 15 15/8 with the 15.0.1 patch.

  Using VMWare player 7.1.3, the VM sees the material, connects, turn lights and then turn off. The virtual machine shows "Driver error" unable to connect to the USB device. This has been tested with two USB devices that have worked with the same setup for a few years now on Windows 7, 8, 8.1 and 10 using VMate 7.x and 12. xs

  Possibly this is related to the last update of Windows,

  Repair, or a full installation of rev 15 NI488.2 solves this problem.

  VISA still works via TCP/IP.

  Any thoughts will be greatly appreciated.

  Update: the pilot is still alive.

  The latest version of Windows, which has been applied to the host system 05/03/2016, restores the driver under the guest virtual machine feature. Revisions to operating system host and client are now at 10586.122.

• GPIB Guide and samples

  Hi all

  I've never had experience with the GPIB interface, but now I have to put the Labview driver for a very old instrument. The provider always publishes the pilot, but they are written in BT 5.0 and they are too old to be read by LV 2010. I have the manual of the instrument and its Protocol of commands then, where can I find examples to follow to build a good driver GPIB in LV?

  Waiting for your quick response, thank you in advance!

  It would be a good place to start.  From the link you will find other links to tutorials an instrument pilot design guidelines that will give you many examples on best practices for the development of pilot

• OutOfMemoryException GPIB

  I encountered a very strange problem.  I am running a test extended (3 days) on a station test and after 24 to 36 hours, I receive a System.OutOfMemoryException exception.  whenever it is triggered by the driver GPIB.  Here's my setup.  I'm using VB.NET 2008 on a 32 bit Windows 7 OS.  The GPIB driver is the Version of NOR-488. 2 2.7.3.  I do continuous calls for the GPIB to read devices and multiplex between devices.  I even run a background program that registers the available memory of the system and the use of all processes memory.  I've seen no evidence that system memory has decreased a lot.  Admittedly, I've only been recording memory usage every 15 seconds, but I tried to avoid creating huge newspapers trying to find this problem.  Could there be a problem with the driver .NET?  Or maybe the way I use it?  This was the more intense use of GPIB we've used so far.  I have not seen all other messages similar to this question, in that I ran.  Any help is very appreciated.

  Mike

  Hi msouza,

  There is a post on the forum with a similar question here: http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/While-running-a-net-3-5-application-it-always....  It seems that the problem this user was had resulted from creating new devices several times during the program, which caused the exception after running for a long period of time.  It seems that he managed to solve this problem to create only a new device once for each GPIB device in its configuration and the problem disappeared.  I would suggested practices suggested reading this post and ensure that your code is after them.

• Need help with drivers on HP Pavilion dv6000 series (8.1 Windows 32 bit)

  Hello! Dear Experts, first I want to apologize for my English...

  ... We're going to start, I have HP Pavilion dv6750ee whith AMD Turion (TM) 64 X 2 Mobile Technology TL-68, 2 GB of SDRAM DDR2, disk FUJITSU HARD MHY2250BH 250 GB, nVIDIA GeForce 8400 M GS 256 MB and Windows 8.1 on board...

  Problems:

  1. the coprocessor (if I translate it is correct) driver not found

  ID

  PCI\VEN_10DE & DEV_0447 & SUBSYS_30CF103C & REV_A1
  PCI\VEN_10DE & DEV_0447 & SUBSYS_30CF103C
  PCI\VEN_10DE & DEV_0447 & CC_0B4000
  PCI\VEN_10DE & DEV_0447 & CC_0B40

  2. system base of the unit (if I correctly translate) driver not found

  ID

  PCI VEN_1180 & DEV_0843 & SUBSYS_30CF103C & REV_12
  PCI VEN_1180 & DEV_0843 & SUBSYS_30CF103C
  PCI VEN_1180 & DEV_0843 & CC_088000
  PCI VEN_1180 & DEV_0843 & CC_0880

  3 not found base system device driver

  ID

  PCI VEN_1180 & DEV_0592 & SUBSYS_30CF103C & REV_12
  PCI VEN_1180 & DEV_0592 & SUBSYS_30CF103C
  PCI VEN_1180 & DEV_0592 & CC_088000
  PCI VEN_1180 & DEV_0592 & CC_0880

  4 update BIOS (I have the BIOS Phoenix F.34), but BIOSAgentPlus on PhoenixBIOS.com told me that I can update my BIOS where I can take and what version (I can't buy BIOSAgentPlus account)? Help, please!

  Ideally, I want my BIOS to support the start-up of the USB Flash drive, now I don't have this feature.

  5. I have a HDMI port with the strange situation... when I have Windows 7 on board and connect the TV via HDMI, sound goes to the TV speakers...

  But on Windows 8.1 sound Laptop speakers, connected TV, what is the problem?

  5. a question about hardware update...

  My nVIDIA GeForce 8400 M GS 256 MB video card really have PCI Express and I can turn it off and put in more powerful video card, or there is no PCI Express and if I need to update the video - is a chance REBALL the chip?

  Sorry for a lot of questions!

  Thank you)

  Hello:

  You can get the BIOS to support driver page was last updated and your laptop on the link below.

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3664998

  I will repeat what I mentioned earlier.

  1. There is only a Windows-based flash file.  Only company in the HP PC have BACK base of flash files and there is no way to update the BIOS from a drive, flash or BACK etc.

  2. you only need to run the Windows based flash using the operating system support (Windows Vista only).

  Any attempt to Flash the BIOS using any other operating system laptop = dead.

  The graphics card is soldered to the motherboard and cannot be removed or replaced.  It doesn't matter what said you that any software.  There is no graphics removable 'card' in your laptop.

• Pilot LabVIEW 5.1.1 Keithley 195's current Source?

  Someone at - it a driver GPIB of Labview 5.1.1 for Keithley 195 a power source?  The drivers on the driver search page OR only go back to version 7, and the driver was not on the driver installation cd.

  Thanks for the help!

  Hello fatim,.

  I came back up to 5 LabVIEW LabVIEW 7 driver. This will open in LabVIEW 5.1.1. It is possible that some of the screws could be broken while their decommissioning.

  Best regards

  Adam G

• My computer will crash and restart randomly

  OK, I have problems of crash/restart. It seems to crash/restart only when left alone for more than 5 minutes I got the BlueScreenView and here's what he says.

  DRIVER_IRQL_NOT_LESS_OR_EQUAL
  BCC 0X000000D1
  BCP1 0X00000000
  BCP2 0X00000002
  BCP3 0X00000008
  BCP4 0X00000000
  TDX.sys tdx.sys + 111e0 TDI translation Driver Microsoft® Windows® operating system Microsoft Corporation 6.0.6002.18005 (lh_sp2rtm.090410 - 1830) 32-bit C:\Windows\minidump\Mini110709-01.dmp

  Where can I go from here and how to fix it?

  Hello

  Your name is messed up, does not appear.

  Windows 7 and Broadcom but also others? Update on your network (NIC) and the WiFi drivers.

  Perhaps this fix applies:

  Error message when you use applications that rely on former Transport Driver Interface (TDI) filter drivers
  on a computer that is running Windows 7 Beta or Windows Server 2008 R2: "STOP 0x000000D1".
  http://support.Microsoft.com/kb/967891

  AVG, Kaspersky and other anti-virus products have been know to cause this problem.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Driver for Keysight 34461 A DMM instruments works with GPIB, errors with USB

  I try to remotely control a DMM of 34461a Keysight using the driver of instruments located here:

  http://sine.NI.com/apps/UTF8/niid_web_display.model_page?p_model_id=21589

  The pilot of the aircraft works like a charm the DMM is connected via GPIB, but it error when connected via USB.  I've isolated the problem to "Default Instrument Setup.vi".  When this VI is called in the case of USB, the device is left in a State which translates by a later call a time-out at VISA Read.  The only way I found to get the instrument still talking after this occurs error condition is turned off.  I have an another 34461a with the same behavior, is probably not a hardware problem.  I can successfully run the example 'Agilent 3446 X series Acquire Single.vi' via USB if I remove all calls to "Default Instrument Setup.vi.

  Everyone knows this unit or a similar problem?

  I use Windows 7, 2014 SP1 LabVIEW, NI-VISA 14.0.1 and GPIB-USB-HS + (OR-488. 2 14.0) when using a GPIB.

  Since the Readme file

  3 known issues

  Agilent IO Suite must be installed to use the USB interface.

• GPIB-USB-HS shows no MAX after that I used the wizard NI VISA DRIVER

  I accessed GPIB USB HS in the MAX software. As I was not able to communicate NF RLC remotely, so I tried Wizard DRIVER VISA OR according to tutorial Assistant pilot NI VISA , however, thnings went wrong and I am not able to see same GPIB to the MAX software now. What should I do now?

  The first picture below shows the GPIB USB HS as shown in the software MAX and the other image shows no GPIB USB HS.

  

  

  Yet once I installed driver USB GPIB link below:

  http://www.NI.com/download/NI-488.2-15.0/5427/en/

  Its working fine now.

  Thank you.

• Small size of device driver USB-GPIB for distro?

  Hi all.

  I had a search, and you can't find a similar question so I hope I'm not duplicating something...

  I created a little app to control an Agilen 53132 meter using the USB-GPIB device OR that I would like people to be able to use internally in my group. Driver I use has been downloaded from http://joule.ni.com/nidu/cds/view/p/id/2315/lang/en.

  I see that my app uses the following DLLs. However, I a) disseminate these and b) there must be some drivers below this level that will be required by a clean system.

  gpibconf. SLL, ni482.dll, nipal32.dll, nipalu.dll, nipalut.dll, nispylog.dll.

  Only problem I have is that it is almost 0.5 GB in size. I want my application to distro with a smaller subset so that the user can install just the driver concerned & dll etc I need for using the USB-GPIB device. Does anyone know if a driver more small value distro exist please?

  Thank you very much

  James

  There is no available smaller driver.

• Driver for GPIB-enet 100 on Ubuntu (10.04 v)

  Hello

  We are currently moving a Solaris 9 system to linux (Ubuntu 10.04) and I would like to know if there is a driver to interface amendments current GPIB-enet 100 boxes.

  Thank you

  Hello

  Pour to communicate with GPIB ENET 100 boxes, you will not need to PyVISA.

  Normally, the installation procedure of the second document that I mentioned has, as a first step, instructions pour Installer correctly NI-VISA and NEITHER 488.2.

  These two components should be enough pour allow you to communicate with your boxes.

  Sincerely,

• Connection problem-NOR-488 GPIB: connection to the driver or device error

  Hello

  I am trying to connect with my tunable laser "Santec" by GPIB-USB-HS. I received the file VI Labview (instrument driver) for my model of tunable laser STL-210 http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=2791 . When I run any VI, for example the "laser_on_off.vi" file I received the error message "NOR-488: connection to the driver or a device error. I checked the 'measurement and automation explorer' and Communicator of NOR-488. 2 gives me the following message appears when I send "interrogate" send string * IDN?

  ----------------

  It is meaningless.

  You have to step way back. The Setup instructions for the GPIB-USB-HS shows you first run diagnostics. Finally, you have done this and got a failure. That's why you get "NOR-488: connection to the driver or a device error. Until the diagnostics pass, you lose everything just your time with anything else. Please provide details on the failure when you run the diagnostic tests.

• GPIB-USB-HS Windows Server 2003 driver available?

  I tried to install the GPIB-USB-HS device on our system of Windows Server 2003 R2 Standard 32 - Bit (German) with the last driver NI488.2 3.0 package.

  But the driver seems to be evil. After restarting Windows comes up with an error and event poster of the errors of several Viewer too:

  -The "nipxirmk" service failed to start due to the following error: the specified driver is invalid

  I think that the latest package isn't compatible Win Server 2003 but that it is announced at ni.com.

  Is it possible to install GPIB-USB-HS on a Win 2003 Server machine?

  Thanks for your help

  Kalize

  Windows Server 2003 32-bit R2 enables PAE by default ("physical address Extension") mode for addressing memory above the 4 GB limit.  National Instruments supports this operating system, it does not address memory above the 4 GB limit by using EAP setting and many pilots OR will fail to load if this setting is enabled.  (Note that your computer may intuitively put some of your memory above the 4 GB limit, even if you only have 4 GB of RAM).

  On Windows Server 2003, you can disable the EAP or prevent Windows to use addresses beyond 4 GB, which allows loading the drivers EITHER.  Please see KB 54D9I6M6: OR software failure when PAE (physical address Extension) is activated on Windows operat... for more information.

• Latest version of the driver AT/GPIB/TNT built with VAT Statement - 32.h?

  Context: AT-GPIB/TNT card linking 488.2 driver see 1.70 in Win98 TransEra HTBasic 8.3, driver GPIBNI. A device on the bus requires that interrupts is disabled. This allows this device works properly, but other devices hang. For NI Spy restores proper operation, which seems to indicate a timing problem. Technical support TransEra agrees with this assessment. Earlier versions of their software (non-Windows) error-free work. So the problem is their driver interfacing to the pilot of 1.70.

  8.3 is not the current version, they are not too motivated to fix it. However, they did look at history and found this:

  "One of our engineers did some research and I could at least limit change that probably caused the problem. Apparently, our driver GPIBNI was built using the VAT Statement - research online and 32.h include file, this file has been replaced by OR with NI488.h. He was not able to know exactly which version of the software OR it was replaced, but NEITHER are likely to help with this, or you can try just a couple of their older versions. »

  So the question is, what is the latest version of the driver OR card AT-GPIB/TNT for Windows 98 built using the VAT Statement - 32.h include file? And where can I get a copy of it? TransEra suggesting that as the solution.

  Thanks for your help.