Trap of HP monitor
What is trap of HP monitor and do I need? I have an Officejet 6500 a and a Pro 8000, both on a wired network (the 6500 is connected only, the 8000 is wireless, but I couldn't get it configured if just plugged). All Mac (2) network are running OS 10.6.8 with current drivers.
When I restart my MacBook Pro it tells me that HP trap monitor has no proper security settings to run.
Can I just remove it or move it out of the folder "startup items"?
Thank you
Hi, please try the following:
Click on the menu go to, and then click computer.
Open the library > StartupItems
Click right (CTRL + left on your Mac keyboard) the HP IO folder, then click on get information
Under sharing & permissions the following:
System = read & law
Wheel = read only
Everyone = read only
Click the gear icon and choose to apply to all included items approved.
Restart your Mac and check if the message has now disappeared.
Tags: HP Printers
Similar Questions
-
LaserJet Pro CM1415fn: Upgraded IMac and Laserjet now only print in black
Just upgraded my iMac, and the printer now not working is not in color. I see that the software is not available for Sierra implies that this may be the cause of the problem is it? Wish now that I had just updated! Software will be available soon?
Thanks for letting me know @Fosse.
Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
Click on the Apple menu, click System Preferences. Click on printers and scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Laserjet Pro CM1415fn)
If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.If you still have problems, and that the printer is on a network, just for fun, try connecting the printer with a USB connection to see if you can print in color.
You could have one do a manual uninstall of drivers and install the HP v5.0 for OS X printer drivers.
Here are the steps: Uninstall HP Printer (Mac) software.
Move the files or folders to the Recycle Bin, drag and drop.
- Macintosh HD/Applications / /Hewlett-Packard folder
- Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
- In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
- Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
- MacintoshHD/Library/Frameworks/HPServicesInterface.framework
- MacintoshHD/Library/Frameworks/HPSmartX.framework
- Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
- In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
- In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard
Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.
- In Macintosh HD/library/printers/hp - delete the folder
- In Macintosh HD/Library/StartupItems, drag the following files in the trash, HP IO and trap of HP monitor
- In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * all files beginning with HP or HP.
- In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
- Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.
Close all open windows.
Restart the Mac.
Empty the trash.
Once connected, repair disk permissions.
Close all applications.
In the Apple menu, click OK, click Applications, and then click utilities.
Open disk utility.
Click on the hard drive.
Click first aid button, and then click Run.Try them HP v5.0 for OS X printer drivers.
Thank you!
-
OfficeJet Pro 8600 D949CA: Scan of Cant to PDF after upgrade Mac Sierra 10.12
Just upgraded to mac Sierra 10.12 and now scan to PDF to the computer does not
error: "a required software component is missing or damaged. Please reinstall the software for your device and/or check your hard drive for problems. »
Then I downloaded the latest version of the driver, but when I click on HP Utility & Scan to computer it gives error
"Software required for the scan of the computer could not be located on this computer.
simple scan software can not find him as either
but disk utility works insofar as I can print on printer
Summary:
I installed the latest driver after upgrade to Mac0s 10.12 Sierra
I can not scan to PDF & send to the computer
Feature product number: CM749A
Name of device model: HP Officejet Pro 8600 N911a
Device serial number: CN34SBXG0H05KC
Mac OS version: 10.11
Service ID: 23226
Hi @orangecowboy,
Thank you for reaching out to the forums! I understand that you have problems of digitalization in PDF format for the Mac since the upgrade to the Sierra. I'd love to help you.
Try the following steps to see if they will solve this problem: Scan network connection is lost (Mac).
You have the option to allow the scan to computer?
I have provided a few steps to manually remove all the old software of the printer and reinstall the latest drivers again if you still have problems.
Here are the steps: Uninstall HP Printer (Mac) software.
Move the files or folders to the Recycle Bin, drag and drop.
- Macintosh HD/Applications / /Hewlett-Packard folder
- Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
- In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
- Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
- MacintoshHD/Library/Frameworks/HPServicesInterface.framework
- MacintoshHD/Library/Frameworks/HPSmartX.framework
- Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
- In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
- In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard
Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.
- In Macintosh HD/library/printers/hp - delete the folder
- In Macintosh HD/Library/StartupItems, drag the following files in the trash, HP IO and trap of HP monitor
- In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * all files beginning with HP or HP.
- In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
- Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.
Close all open windows.
Restart the Mac.
Empty the trash.
Once connected, repair disk permissions.
- On the Dock, click Applications, then utilities.
- Double-click disk utility.
- Highlight your hard drive / partition on the left (by default this is "Macintosh HD").
- Click repair disk permissions at the bottom of the window.
- Once the repairs completed, restart the computer.
- Restart the computer.
Install the latest version of the software: HP Easy Start.
If the problem is resolved and that you appreciate my help, please click on the button "Accept as Solution" and the "Thumbs Up". Let me know how make you out. See you soon!
-
Force10 problem and Dell Openmanage Network Manager snmp
Hello
I have install snmp on Force10: traps, string community, I have also setup set up on omnm, but for some reason, I could not authenticate with F10, please find config below as well as key details:
Dell10G-1 #show running-config
Current configuration...
! Version 9.0 (1.3)
! Last modification of the configuration to Fri Feb 21 14:07:21 2014 by default
! Startup-config updated Fri Feb 21 12:50:21 2014 by default
!
start the primary system battery-unit 1: A:
start a system secondary battery-unit 1: B:
start the system default stack-unit 1: A:
start the primary system battery-unit 2: A:
start a system secondary battery-unit 2: B:
start the system default stack-unit 2: A:
!
redundancy full automatic synchronization
!
hostname Dell10G-1
!
enable password 7 b125455cf679b208d3169fc631698be5722a1b01b7edad00
!
username admin password 7 269672acad1160b3ff0b65cde5149f32
!
no activation of dcb
!
disposal of battery-unit 1 S5000
!
stack stack-unit 1-group 14
!
stack stack-unit 1-group 15
!
TenGigabitEthernet-1/0 interface
no ip address
hybrid portmode
switchport
TrustDSCP of service-policy input
no downtime
!
interface TenGigabitEthernet 1/1
no ip address
hybrid portmode
switchport
TrustDSCP of service-policy input
no downtime
!
interface TenGigabitEthernet 1/2
no ip address
hybrid portmode
switchport
TrustDSCP of service-policy input
no downtime
!
interface TenGigabitEthernet 1/3
no ip address
hybrid portmode
switchport
TrustDSCP of service-policy input
no downtime
!
interface TenGigabitEthernet 1/4
no ip address
hybrid portmode
switchport
TrustDSCP of service-policy input
no downtime
!
interface TenGigabitEthernet 1/5
no ip address
hybrid portmode
switchport
TrustDSCP of service-policy input
no downtime
!
interface TenGigabitEthernet 1/6
no ip address
switchport
no downtime
!
interface TenGigabitEthernet 1/7
no ip address
switchport
no downtime
!
interface TenGigabitEthernet 1/8
no ip address
switchport
no downtime
!
interface TenGigabitEthernet 9/1
no ip address
switchport
no downtime
!
interface TenGigabitEthernet 1/10
no ip address
switchport
no downtime
!
interface TenGigabitEthernet 1/11
no ip address
switchport
no downtime
!
interface TenGigabitEthernet 1/12
no ip address
hybrid portmode
switchport
TrustDSCP of service-policy input
no downtime
!
interface TenGigabitEthernet 1/13
no ip address
hybrid portmode
switchport
no downtime
!
interface TenGigabitEthernet 1/14
no ip address
switchport
no downtime
!
interface TenGigabitEthernet 1/15
no ip address
switchport
no downtime
!
interface TenGigabitEthernet 1/16
no ip address
switchport
no downtime
!
interface TenGigabitEthernet 1/17
no ip address
switchport
no downtime
!
interface TenGigabitEthernet 1/18
no ip address
Shutdown
!
interface TenGigabitEthernet 1/19
no ip address
Shutdown
!
interface TenGigabitEthernet 1/20
no ip address
Shutdown
!
interface TenGigabitEthernet 1/21
no ip address
Shutdown
!
interface TenGigabitEthernet 1/22
no ip address
Shutdown
!
interface TenGigabitEthernet 1/23
no ip address
Shutdown
!
interface TenGigabitEthernet 1/24
no ip address
MTU 12000
switchport
no downtime
!
interface TenGigabitEthernet 1/25
EQL-con2 description
no ip address
MTU 12000
switchport
no downtime
!
interface TenGigabitEthernet 1/26
no ip address
MTU 12000
switchport
no downtime
!
interface TenGigabitEthernet 1/27
no ip address
hybrid portmode
switchport
no downtime
!
interface TenGigabitEthernet 1/28
no ip address
MTU 12000
switchport
no downtime
!
interface TenGigabitEthernet 1/29
no ip address
hybrid portmode
switchport
no downtime
!
interface TenGigabitEthernet 1/30
no ip address
MTU 12000
switchport
no downtime
!
interface TenGigabitEthernet 1/31
no ip address
hybrid portmode
switchport
no downtime
!
interface TenGigabitEthernet 1/32
no ip address
no downtime
!
interface TenGigabitEthernet 1/33
no ip address
Shutdown
!
TenGigabitEthernet 1/34 interface
no ip address
Shutdown
!
interface TenGigabitEthernet 1/35
no ip address
Shutdown
!
interface 1/48 fortyGigE
no ip address
Shutdown
!
interface fortyGigE 1/52
no ip address
Shutdown
!
disposal of battery-unit 2 S5000
!
stack stack-unit 2-group 14
!
stack stack-unit 2-group 15
!
TenGigabitEthernet-2/0 interface
no ip address
Shutdown
!
interface TenGigabitEthernet 2/1
no ip address
Shutdown
!
interface TenGigabitEthernet 2/2
no ip address
switchport
no downtime
!
interface TenGigabitEthernet 2/3
no ip address
Shutdown
!
interface TenGigabitEthernet 2/4
no ip address
Shutdown
!
interface TenGigabitEthernet 2/5
no ip address
switchport
no downtime
!
interface TenGigabitEthernet 2/6
no ip address
Shutdown
!
interface TenGigabitEthernet 2/7
no ip address
Shutdown
!
interface TenGigabitEthernet 2/8
no ip address
Shutdown
!
interface TenGigabitEthernet 9/2
no ip address
Shutdown
!
interface TenGigabitEthernet 2/10
no ip address
Shutdown
!
interface TenGigabitEthernet 2/11
no ip address
Shutdown
!
interface TenGigabitEthernet 2/12
no ip address
Shutdown
!
interface TenGigabitEthernet 2/13
no ip address
Shutdown
!
interface TenGigabitEthernet 2/14
no ip address
Shutdown
!
interface TenGigabitEthernet 2/15
no ip address
Shutdown
!
interface TenGigabitEthernet 2/16
no ip address
Shutdown
!
interface TenGigabitEthernet 2/17
no ip address
Shutdown
!
interface TenGigabitEthernet 2/18
no ip address
Shutdown
!
interface TenGigabitEthernet 2/19
no ip address
Shutdown
!
interface TenGigabitEthernet 2/20
no ip address
Shutdown
!
interface TenGigabitEthernet 2/21
no ip address
Shutdown
!
interface TenGigabitEthernet 2/22
no ip address
Shutdown
!
interface TenGigabitEthernet 2/23
no ip address
no downtime
!
interface TenGigabitEthernet 2/24
EQL-con1 description
no ip address
MTU 12000
switchport
no downtime
!
interface TenGigabitEthernet 2/25
no ip address
MTU 12000
switchport
no downtime
!
interface TenGigabitEthernet 2/26
no ip address
hybrid portmode
switchport
no downtime
!
interface TenGigabitEthernet 2/27
no ip address
MTU 12000
switchport
no downtime
!
interface TenGigabitEthernet 2/28
no ip address
hybrid portmode
switchport
no downtime
!
interface TenGigabitEthernet 2/29
no ip address
MTU 12000
switchport
no downtime
!
interface TenGigabitEthernet 2/30
no ip address
hybrid portmode
switchport
no downtime
!
interface TenGigabitEthernet 2/31
no ip address
MTU 12000
switchport
no downtime
!
interface TenGigabitEthernet 2/32
no ip address
MTU 12000
switchport
no downtime
!
interface TenGigabitEthernet 2/33
no ip address
MTU 12000
switchport
no downtime
!
TenGigabitEthernet 2/34 interface
no ip address
MTU 12000
switchport
no downtime
!
interface TenGigabitEthernet 2/35
no ip address
Shutdown
!
interface fortyGigE 2/48
no ip address
Shutdown
!
interface fortyGigE 2/52
no ip address
Shutdown
!
interface ManagementEthernet 0/0
no downtime
!
ManagementEthernet 1/0 interface
IP address 10.0.0.30/24
no downtime
!
ManagementEthernet 2/0 interface
IP address 10.0.0.25/24
no downtime
!
ManagementEthernet 3/0 interface
no downtime
!
ManagementEthernet 4/0 interface
no downtime
!
ManagementEthernet-5/0 interface
no downtime
!
ManagementEthernet 6/0 interface
no downtime
!
ManagementEthernet 7/0 interface
no downtime
!
ManagementEthernet-8/0 interface
no downtime
!
interface ManagementEthernet 9/0
no downtime
!
ManagementEthernet-10/0 interface
no downtime
!
ManagementEthernet-11/0 interface
no downtime
!
interface Vlan 1
! unidentified TenGigabitEthernet-1/0-17, 27, 29, 31
! unidentified TenGigabitEthernet 2/2,5,26,28,30
!
Vlan 100 interface
ISCSI description
iSCSI name
no ip address
tagless TenGigabitEthernet 1/24-26, 28, 30
tagless TenGigabitEthernet 2/24-25, 27, 29, 31-34
no downtime
!
interface Vlan 150
VMotion description
no ip address
Tagged TenGigabitEthernet 1/27,29,31
Tagged TenGigabitEthernet 2/26,28,30
Shutdown
!
interface Vlan 999
Speech description
the voice name
no ip address
Tagged TenGigabitEthernet 1/0-3, 5, 12-13
no downtime
!
interface Vlan 4000
no ip address
Shutdown
!
interface Vlan 4001
no ip address
Shutdown
!
interface Vlan 4003
no ip address
Shutdown
!
interface Vlan 4010
no ip address
Shutdown
!
interface Vlan 4020
no ip address
Shutdown
!
interface Vlan 4030
no ip address
Shutdown
!
management route 0.0.0.0/0 10.0.0.1
!
class service dynamics dot1p
!
SNMP-server community Monitoring ro
Server enable SNMP traps bgp
SNMP-Server enable traps snmp authentication linkdown, linkup cold start
Server enable SNMP traps vrrp
Server enable SNMP traps lacp
entity of traps activate SNMP Server
Enable SNMP-Server intercepts stp
Server enable SNMP traps ecfm
Server enable SNMP traps vlt
Enable SNMP-Server intercepts fips
Server enable SNMP traps xstp
Enable SNMP-Server intercepts ets
Server enable SNMP traps envmon cam-use temperature power fan
Server enable SNMP traps eoam
Enable SNMP-Server intercepts pfc
Host Server SNMP 10.0.0.238 traps version 1 monitoring - port udp 162
!
class-map correspondence-everything ClassMap1
match ip dscp 46
!
Policy-map-input TrustDSCP
Class-card service-queue ClassMap1 2
Trust diffserv
!
Lldp Protocol
to advertise dot1-tlv, port port-protocole-vlan-id-vlan-id
advertise dot1-tlv-name of vlan id the vlan-999
advertise med
advertise med 999 6 46 voices
!
0 line console
line vty 0
line vty 1
line vty 2
line vty 3
line vty 4
line vty 5
line vty 6
line vty 7
line vty 8
line vty 9
!
end
______________________________
Dell10G-1 #show snmp group
GroupName: v1v2creadg security model: v1
readview: v1v2cdefault writeview: no give view entry
notifyview: v1v2cdefault context: no context specified
status: Active
GroupName: v1v2creadg security model: v2c
readview: v1v2cdefault writeview: no give view entry
notifyview: v1v2cdefault context: no context specified
status: Active
GroupName: v1v2cwriteg security model: v1
readview: v1v2cdefault writeview: v1v2cdefault
notifyview: v1v2cdefault context: no context specified
status: Active
GroupName: v1v2cwriteg security model: v2c
readview: v1v2cdefault writeview: v1v2cdefault
notifyview: v1v2cdefault context: no context specified
status: Active
__________________________________
Dell10G-1 #show snmp community
Community: monitoring
Background: no
Security-name: v1v2creadu
Community: public
Background: no
Security-name: v1v2creadu
Don't know if there are other settings of snmp that must be put in place or I missed something
Thank you for your help
Hello
Can you try to set up OMNM like this http://en.community.dell.com/support-forums/network-switches/f/866/t/19535001.aspx
Set up two profiles of authentication in OMNM. ((1) SNMP v1/v2c and used the SNMP community string, I put on the Force 10 switch 2) Telnet/SSH using the switches telnet user ID, password and the password 'Enable' leaving him activate ID empty.
-
I was doing some research on SNMP and MIBs.Hit a roadblock when this question came to my mind. Windows stores all MIBs under
%SystemRoot%\System32
I know that these MIBs are used to send traps. I just want to know the throughput, or how it's done. Who reads all this information and provides it to the snmp service to send a trap event? If I need to send traps that are defined in some other MIBs, how can I do it?
Any help will be appreciated. :)
Hello
The question you posted would be better in the Technet forum. Check out the link and ask the question.
http://social.technet.Microsoft.com/forums/en-us/winserver8gen/threads
-
Generate SNMP traps for monitoring tests
Hi all
We would like to test our network management system effectively.
We have configured SNMP. But as we cannot generate some breakdowns that we want to generate some test traps.
Could you tell me if there is a way to generate the CLI for i.e. false SNMP traps?
Ideally, we would like to test things like: excess temperature, the FAN failure, failure of power, etc...
Any help would be appreciated,
Thank you very much in advance
Concerning
Sorry I see you wanted traps, not sys records my bad, so try this link https://supportforums.cisco.com/docs/DOC-11745
Sent by Cisco Support technique iPad App
-
Photosmart C309a series. After starting iMac, trap monitor failed? Why?
How can I solve this info on the screen after the computer starts:
Hello
The HP software is for Mac OS X 10.6 and not compatible with Mountian Lion, therefore the question appears.
Uninstall the software using Uninstall HP under Applications > Hewlett-Packard, then click on Print & Scan and delete the print queue of the printer.
Then go to Printers\Library and place the HP folder to the trash.
Under Printers\Library enter PPDs\Contents\Resources. You can search C309 folder and put the results in the trash.
Restart your Mac and install the drivers via Apple by following the steps below:
http://support.HP.com/us-en/document/c03378792
Shlomi
-
Laptop screen
Independent monitor
Laptop shows a program
Monitor showed another.
I unplugged the monitor. This time seems to have caught in the trap of this program
How can I open program on laptop, which seems to be "preserved" on the monitor
Open both monitors. Move of the program window to the second monitor to the laptop.
To move a window from one screen to another
Click the title bar of the window, and then drag the window to a new location on the laptopMove windows between multiple monitors
http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitorsIf it does not, in the display settings, uncheck the box to "Extend the desktop to this monitor" (selected second monitor).
-
How to open the port 161 on the ASA and Cisco switches for monitoring of BB
Dear all,
I want to install BB to monitor snmptraps suffering of failure.
The newspaper shows BB cannot connect to all ports of the switch 161, and I even can't telnet to 161 XXX_17f for example.
My switches are Cisco C3550, C2950, etc. of the ASA.
Mon 7 Nov 15:43:03 2011 bbnet cannot connect to the server XXX_17f on port 161
Mon 7 Nov 15:43:03 2011 bbnet cannot connect to the server XXX_9f on port 161
Mon 7 Nov 15:43:03 2011 bbnet can't connect to XXX server on port 161
Thank you
Anson
no need to adjust anything in bb-hosts. If you have added setings in bb-hosts, delete them. Also remove associated in bbvar/logs log files. (otherwise, you'll have purple when you delete the SNMP, trap tags bb-hosts)
A column of trap will be that no show until the device sends a trap to BB.
-
PowerConnect 2824 - SNMP monitoring
Hello
I want to monitor the State of a switch Dell PowerConnect 2824 using SNMP. I have trouble finding the proper MIBS.
Edit: I managed to access the switch through the web interface and am SNMP receives traps as expected.
2) whose identifiers are available for monitoring: power, temperature, load, connections, faults, etc.? Where can I find the MIB files? Or documentation explaining the use of more detailed?
Advice or documentation links are appreciated.
Thank you.
The MIB file is included in the download for the firmware.
-
SNMP Trap Variable alertSystemFQDN
I have a client with a PE r.620 with an iDRAC7 tries to monitor the integrity of their server with interruptions SNMP hardware. They are especially interested in the varbind alertSystemFQDN (1.3.6.1.4.1.674.10892.4.5000.10.8), which is apparently not defined and appears empty when they receive the iDRAC SNMP traps. Exactly how is set the varbind alertSystemFQDN? It is configurable by the user through racadm, or based on a DNS lookup, or what? I could not find a sufficient explanation in the reference Guide of SNMP for iDRAC8.
anoryxI am interested by out exactly this informationIt is taken from the operating system. This is the host name in the operating system. You must have OpenManage Server Administrator installed to iDRAC to be able to question the news of the OS.
-
I have a use case, by which we receive------ingest SNMP devices SAN Hitachi interruptions in our Foglight 5.6.5 instance. We have the cartridge installed and loaded 5.6.3 integration and full access to the dashboard integration. Can anyone shed light on what are the next steps?
Daisy,
I recommend that you look at the information of the community of http://en.community.dell.com/techcenter/performance-monitoring/foglight-administrators/f/4788/t/19552981.aspx#6115
Bart has contributed to the discussion of SNMP traps.
David Mendoza
-
CiscoWorks LMS 4.1 monitor temperature
Hello everyone!
I am creating a poller to monitor the trap of the temperature of my cisco catalyst 2960 Ciscoworks LMS 4.1.
I created a snmp trap on my device:
Switch(conf-t) # snmp-server <@IP_server_LMS>SNMPv2c host -I use SNMPv2c
Switch(conf-t) # Server enable snmp traps envmon temperature
I created a MIB model Envmon with these variables:
-ciscoEnvMonTemperatureThreshold
-ciscoEnvMonTemperatureStatusValue -ciscoEnvMonTemperatureState -ciscoEnvMonTemperatureLastShutdown I created a poller associated with my model, I add my device and when I click on 'Next', I have this error message:
###
No instance are in the devices. This could be because the device is inaccessible, the device does not have the case for selected models or the timeout value is low.
###
Could someone explain to me why I can't monitor MIB?
Thanks for your consideration and Merry Christmas to all!
It seems that most of the 2960 have a temperature sensor implemented in hardware and therefore, it shows no values.
If a device does not show anything on CLI, it is almost impossible that it will display something via SNMP.
-Thank you
@IP_server_LMS> -
Is there a way to receive notifications on ssm module security events in real time, I installed in my ASA? Are some that traps SNMP the only option? Sensor health section has also on the prevention page home/Intrustion ASDM, recovery of events marked as critical "not consulted. How can I erase this? I view the events of the module, and this does not erase it. Does have to do with the product MARCH?
You can use IME to monitor IP addresses in real-time. It also supports the management of events in real-time for IPS five devices. Have a look:
http://www.Cisco.com/en/us/products/ps9610/index.html
http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps5729/ps5715/ps9610/data_sheet_c78-459033.html
It is freely available to all customers have a valid service contract. Make sure you that you run 6.1.x code to use the IME performance management features.
Concerning
Farrukh
-
Monitoring VPN connection attempts
I would like to be able to use the syslog messages that are detached from the ASA to monitor VPN connection attempts (successful or not). Looking at the posts system there are several codes that relate to this.
I wonder if anyone has a good way to use syslog to do this? There are some codes that can be used for this information?
Thank you.
You can set the ASA to send syslog messages when the user connects and disconnects. There are a few types of 'remote access' as IPsec VPN, webvpn / without client anyconnect/ssl vpn client that you can follow.
If you are using Clientless SSL VPN syslogs usually begin with 716xxx. For example the syslog for connect is 716001 and disconnect is 716002. There is a list of other Clientless VPN SSL related messages here. You can view the specific contents of each journal here:
http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsg
http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4776913
If you use SSL VPN Client (SVC1.x, AnyConnect 2.x) syslogs usually begin with 722xxx. For example, the syslog for connect is 722022 and disconnect is 722023. There is a list of other customer VPN SSL related posts here
http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsg
http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4778697
If you use the IPSec VPN client, you can follow a success to connect with 713119 (indicates the phase 1 completed), 713049 (indicates the complete Phase2) and disconnect with 113019. There is a syslog ipsec additional 713049 that you can follow for ipsec.
http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4775678
http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4775412 http://www.Cisco.com/en/US/docs/Security/ASA/asa80/System/message/logmsg
http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4769539
Here are some other notes to keep in mind:
-You can tell that the logging levels you currently have on the command line ASA with 'show log '.
-Newspapers that you send to a syslog server are controlled with the commands "Logging Trap". For example 'logging trap information' (level 6) or "trap alerts logging" (level 1)
-You can tell what level of severity (i.e., alerts, critical, errors, warnings, notifications, informational, debug) each one connects through this link. As you can see by checking the link, those follow-up sign in or out as I've mentioned above are usually information (sev 6)):
http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logsev
http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logsevp.html
-If you want to create a specific subset of the syslogs to send to a specific device, you can do it with a class or a list of logging:
http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/m
For example (class log):
http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/m
http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/monitor.html#wp1065253
class check vpnc informational FRT
For example (list of logging):
http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/monitor.html#wp1065512
log list mylist message 722022
log list mylist message 722023
logging trap mylist
Don't forget to evaluate the positions that helped you and to mark it as resolved if you question has been answered.
-heather
Maybe you are looking for
-
Printer Spooler service is not running.
I can't find or add a printer. Message says that the Printer Spooler service is not running. I made sure that the service has been started and drivers set to date but still get the message whenever I have select Add a printer. No printer icon appear.
-
How can I get XBOX Music Mixer PC tool to work with Windows 7?
How can I get XBOX Music Mixer PC tool to work with Windows 7? It seems to work only with Windows XP. Thank youSam K.
-
When I plug my laptop headphone it makes a noise to hum through the helmet. Can you please help me on what to do?
-
Accounting ACS logs to Syslog server
Dear Experts, We use the Cisco Secure ACS 4.2 in our Organization, where accounting Ganymede has been turned on AAA cleints. Currently, ACS connects with the accounting information accurate cli. Is it possible to repel these accounting logs to syslog
-
Microsoft Pinball Arcade and Windows 8
I have recently upgraded to Windows 8. I find that my favorite game, Windows Pinball Arcade, does not work on Windows 8. It says it is installed (?) but does not work because I am slot as 64-bit Windows 8 Pro. I've been running 64 bit for years, Wind