Trend Micro customer main Console has stopped working

Similar Questions

• Windows 7 Microsoft Management Console has stopped working

  I am trying to open and print an element using AdobeReader, I updated my version of adobe in the last week or two. So, I'm pretty sure I have the latest version. When I looked for a solution for the following error message "Adobe Acrobat: AcroRd32.exe - Application Error" with the message "the instruction at 0x66882553c referenced memory at 0x0b6a4234. The memory could not be read. Click OK to complete the program"and was conducted to check my event viewer. I found this file on my computer and when I clicked it, I got an error message saying 'Microsoft Management Console has stopped working' and 'Windows is common for a Solution to the problem. However he never gave me a solution or even a propblem as possible. I investigated further on this site and found help advising me to open my services.msc in the start window and locate the event viewer. This is where my problem is that I can't locate event viewer in this particular window. Can someone help me?

  Hello

  1. Remember to make changes before this problem?

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link

• customer calls voip has stopped working

  Dear Sir.

  IM using internet calling card actionvoip but when I call the error (client to make calls voip has stopped working) Please declined or send me some greeting microsoft windowe
  Thank you
  Vishnu

  Hello

  read the answer below about ActionVoip

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/i-am-trying-to-make-a-VoIP-call-but-its-not/f560c322-3ee1-4200-B43E-bf2861d3342d

• Microsoft Management Console has stopped working,

  When I try to open the Services get Microsoft Management Console stopped working.

  I ran sfc and has problems with mshtml.dll, among other files.

  This is part of the log:

  2011-07-29 09:00:29, info CSI 00000302 [SR] cannot repair the military record [l:20 {10}] "mshtml.dll" Microsoft-Windows-IE-HTMLRendering, Version 9.4.8112.16430, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2011-07-29 09:00:29, info CSI 00000303 [SR] this element is referenced by [l:156 {78}] "' Package_1_for_KB2530548 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 9.4.1.0.2530548 - 12_neutral_GDR" "
  2011-07-29 09:00:29, info CSI 00000304 hashes for Member file? \C:\Windows\System32\mshtml.dll are not real file [l:20 {10}] "mshtml.dll": "
  Found: {l:32 b:NShyYjBbIUChbBY5LiLjFoB6/ekwlW/ef28uyjRQlLc =} expected: {l:32 b:oos9UuuZfvXEyFunl + vncI2DvnVD + Vo8pSj1iBJSVno =}
  2011-07-29 09:00:29, info CSI 00000305 Member \SystemRoot\WinSxS\amd64_microsoft-windows-ie-htmlrendering_31bf3856ad364e35_9.4.8112.16430_none_87d580a7f4d64061\mshtml.dll file hashes are not actual file [l:20 {10}] "mshtml.dll": "
  Found: {l:32 b:NShyYjBbIUChbBY5LiLjFoB6/ekwlW/ef28uyjRQlLc =} expected: {l:32 b:oos9UuuZfvXEyFunl + vncI2DvnVD + Vo8pSj1iBJSVno =}
  2011-07-29 09:00:29, info CSI 00000306 [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"Mshtml.dll '; source file in the store is also corrupted
  2011-07-29 09:00:29, info CSI 00000307 Member \SystemRoot\WinSxS\amd64_microsoft-windows-ehome-font_31bf3856ad364e35_6.1.7600.16385_none_2ad6e90ee30ff985\WTVGOTHIC-S.ttc file hashes are not actual file [l:30 {15}] "WTVGOTHIC - S.ttc":
  Found: {l:32 b:UDL8t478X0i2FBeJvYbiU8O9Mo7RBSbqJnxsQ5q2Wmo =} expected: {l:32 b:dzS / rYReIjLpeofj7jo1l6q + cqg4X64ygEv2P/Dh6uo =}
  2011-07-29 09:00:29, info CSI 00000308 [SR] cannot repair the military record [l:30 {15}] "WTVGOTHIC - S.ttc" Microsoft-Windows-ehome-police, Version 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch
  2011-07-29 09:00:29, info CSI 00000309 [SR] this element is referenced by [l:176 {88}] "" Microsoft-Windows-MediaCenter Package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.7601.17514.MediaCenter ' "
  2011-07-29 09:00:29, CSI 0000030 has hashes for Member file Info? \C:\Windows\ehome\WTVGOTHIC-S. TTC is not actual file [l:30 {15}] "WTVGOTHIC - S.ttc":
  Found: {l:32 b:UDL8t478X0i2FBeJvYbiU8O9Mo7RBSbqJnxsQ5q2Wmo =} expected: {l:32 b:dzS / rYReIjLpeofj7jo1l6q + cqg4X64ygEv2P/Dh6uo =}

  As is the only PC Win7 I can't copy files from another PC.

  Event poster mmc.exe exception 0xc0000005 Viewer.

  Name of the failing application: mmc.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc808
  The failed module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
  Exception code: 0xc0000005
  Offset: 0x0000000006ab0000
  ID of the process failed: 0xa3c
  Start time of application vulnerabilities: 0x01cc4d7f99523eb5
  The failing application path: C:\Windows\system32\mmc.exe
  Path of the failing module: unknown
  Report ID: d7710ba3-b972-11e0-892a-1c6f65adf7ec

  I tried to restore to restore both points before, when I think that the problem began, but it did not help, so I undid the restorations.

  Help appreciated.

  Sue

  Win7 Professional 64 bit.

  He seemed to be solved by an automatic update.

• Windows Server 2008 r2 "MMC Console has stopped working" error message

  Hello

  I am running Server 2008 r2 Service Pack 1.

  It works internally since December 2013 without update.

  After the update/patch a new image, or Server Manager or Microsoft Management Console features are accessible, I even tried opening the dialog box run GPEDIT. All the same error:

  "The Microsoft Management Console stopped working.

  A problem caused the blocking of the program works correctly. Please close the program. »

  The only options are debug and close the program.

  I did some research and found others who have the same problem in the past. It seems that an update for .NET 3.5 (KB2449742) was the source of the problem. After retiring people have stated that no other condition, however I have .NET 4.5 and this update is not yet listed in the "installed updates".

  Before you give up and resort to a previous image and reinstall a number of new pieces of software, I hoped that there could be a simpler solution.

  My only support tech, which normally I lean on for this kind of questions, is out of town for work and cannot help.

  ANY HELP?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• "Adobe Photoshop cc has stopped working" when I click on an adjustment layer

  I get this message "Adobe Photoshop CC has stopped working".

  I've done everything there is on the help site. Still no luck. Here's what happens:

  Photoshop opens and I can work with it. It seems that almost all functions work perfectly, HOWEVER... When I try to access an adjustment layer, say the levels, then Photoshop will stop. Strangely, if I select the black & white adjustment layer, it WORKS? The OTHERS don't.

  I also had on the Adobe help forum and can't help and say it could be a flaw in Windows

  My system:

  Windows 7 Service pack 1

  740 NVIDIA graphics card

  Avast security

  Here are the error codes I got from the event viewer

  The failing application name: Photoshop.exe, version: 16.1.1.327, time stamp: 0x5667fb90

  The failed module name: Photoshop.exe, version: 16.1.1.327, time stamp: 0x5667fb90

  Exception code: 0xc0000005

  Offset: 0x000000000613ac34

  ID of the process failed: 0xa2c

  Start time of application vulnerabilities: 0x01d1528f0f0ee895

  The failing application path: C:\Program Files\Adobe\Adobe Photoshop CC 2015\Photoshop.exe

  Path of the failing module: C:\Program Files\Adobe\Adobe Photoshop CC 2015\Photoshop.exe

  Report ID: 77c9266d-bebc-11e5-98ce-d43d7ebe3e53

  The failing application name: Photoshop.exe, version: 16.1.1.327, time stamp: 0x5667fb90

  The failed module name: Photoshop.exe, version: 16.1.1.327, time stamp: 0x5667fb90

  Exception code: 0xc000041d

  Offset: 0x000000000613ac34

  ID of the process failed: 0xa2c

  Start time of application vulnerabilities: 0x01d1528f0f0ee895

  The failing application path: C:\Program Files\Adobe\Adobe Photoshop CC 2015\Photoshop.exe

  Path of the failing module: C:\Program Files\Adobe\Adobe Photoshop CC 2015\Photoshop.exe

  Report ID: 7943d034-bebc-11e5-98ce-d43d7ebe3e53

  The modules work perfectly in Safe Mode BUT not when I do a clean reboot.

  I also did the following:

  Creates a new user

  Run FIXIT

  SFC/SCANNOW

  Uninstalled and re installed Photoshop CC

  Uninstalled and re installed Driver Nvidia

  Restored to the old NVIDIA driver

  Uninstalled all drivers (Wacom tablet & external HD)

  There were also times that I could not get into the event viewer (this message appeared "Microsoft Management Console has stopped working")

  Let me know if you need more details.

  Cheers, Craig

  Hi Craig,.

  Please provide a detailed account of your question. You, the efforts are very much appreciated!

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  a. you did any important changes made to the computer just before the problem occurred?

  b. what fixit did you run, when you say "Run FIXIT"?

  You have tried most of the linear troubleshooting, it can be concluded that the question could arise also following a conflict of third-party software that impede the performance of Adobe Photoshop CC. To diagnose the problem, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  It is possible that the application has not been uninstalled properly and have hampered after the new installation. I suggest to try to start the next fixit and then try to install the program Photoshop CC.

  The problems that the programs cannot be installed or uninstalled

  If the problem persists, try the following method.

  Method 2:

  The question could also arise due to a conflict of third-party software, so, I would be as you suggest clean boot of the system once and then try to install the program in a boot environment.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
  How to perform a clean boot in Windows

  If the problem does not occur in the boot, you can determine which applications and services on the computer is causing this issue.

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Menu of Options of blackBerry Smartphones has stopped working

  My article 'Options' in the menu on the main screen has stopped working.  It is to the context menu that appears when you press the BB.  It allows you to change the wallpaper and rearrange the rows and columns of icons.  It works once after I reboot by removing the battery.  I put the background (once) and the configuration of the icon (once).  This works in other apps like mail and browser. On the main screen you can press it, but it does nothing.

  Any information would be appreciated.

  It is a bug.  I spent some time with Verizon and Blackberry on it.  I suspect that his establishment when the OS patch was released.

  Blackberry support is excellent.  I suggest, if you're having some real problems, give them a call.

• Trend Micro Internet Security has stopped working and was closed

  Original title: manages all components of Trend Micro, __Internet security. has stopped working and has been __closed. __

  Have you tried to disable my windows firewall and am always get error message (manages all components of Tred Micro Internet security has stopped working and was closed)

  Hello

  You should check with the support of TrendMicro.

  Frankly it seems to ask a lot of questions, so I remove it and replace it with other more
  compatible methods. To uninstall it, and then use the removal tool from
  TrendMicro.

  TrendMicro - removal tools
  http://eSupport.trendmicro.com/pages/how-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

  How can I uninstall my Trend Micro program removal tools fail?
  http://eSupport.trendmicro.com/pages/how-do-I-uninstall-my-trend-micro-home-and-Home-Office-program-if-the.aspx

  ------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Customer auditor of Java (TM) update has stopped working

  I get this message every week (once a week - same time, same day):

  (Java (TM) Update Client Checker has stopped working.
  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available)

  What is the cause of the problem and how can I solve this problem? Sometimes, even if Java is updated to the latest version (Java 6 update 26). I have also disabled/uninstalled all the old java consoles associated with java that were previously installed.
  What is jaucheck.exe?

  More information on the problem.
  It seems to be associated with a "jaucheck.exe" located in Common Files/Java/Java Update.
  When that is run (manually or to him only once a week such as specified above), it causes the above crash error message.
  When the file/app is run manually, it is run as an administrator.
  Jucheck.exe to check updates of running jobs.

  Hello

  I propose to execute the file by right click setup.exe and select, "Run as Administrator" and try to reinstall the update of Java.

  For reference, try the steps in this article by Merilyn O :

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/problem-with-Java-Update-client-Checker/c2352400-e828-492d-ae28-79c6767a2d37

  I hope that helps!

• Console window host has stopped working

  I get this error poop every 5 seconds and it is very annoying

  Any help please?

  Hello Amira,

  Thanks for posting your query in Microsoft Community.
   
  I understand that you have problems with the "Console windows host has stopped working". So, please try to follow the steps mentioned below to solve the problem.
   
  Method 1: Try to perform a clean boot, put your boot system to identify whether third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
   
  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135
  
  Note: Refer to "How to reset the computer to start as usual after a clean boot troubleshooting" under more information to prepare the computer to start as usual after a repair.
   
  See also:
   
  Refer to the suggestions of Waseemulla Shariff said onOctober 23, 2012

  http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/why-does-console-windows-host-stopped-working-keep/f1604b74-a99c-412e-95ce-5cc87dbc46dc?msgId=80f25625-8724-4d80-a89e-1d52fc822b4e

   
  I hope this helps.
   
  Thank you

• Main application MFC Application has stopped working

  I get this error "Hand App MFC Application has stopped working" when I try to use Blaze DTV 6.0 on my computer. How can I resolve that I tried to use this same program on another laptop and it works fine.

  Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Have you tried to clean your Temp folder, you can do this by typing folder in the Start Menu RUN box.  This will open your Temp folder, there, you can remove all Windows will allow you to do.

  It may be necessary to show both hidden and system files and also uncheck 'Hide known file types' in Control Panel / folder Options / view to navigate to the mentioned location of Temp.

  You can take a look at some of these stories on MFC If you want and think they might have some clues.

  http://www.google.com.au/search?hl=en&rls=com.microsoft%3Aen-au%3AIE-SearchBox&q=mfc+application+has+stopped+working+windows+7&aq=7&aqi=g-c7g2g-c1&aql=&oq=%22MFC+Application+has+stopped+working%22&gs_rfai=

• "winrscmde has stopped working and was closed".

  6 months get more messages-popup "winrscmde has stopped working and was closed" - other problems with adobe, launcher hook antispam OE, consumer software customer, internet micro-low utility of seizure and windows host (rundl32) process all have in time has stopped working - I followed most of the suggestions sent to me and no result - spent money on drivers and norton and just tired that - using Windows Vista Edition Home Premium

  Hello

  I suggest you run the Microsoft FIXIT from the link below and if the problem persists
  Troubleshoot Internet Explorer to IE quick, safe and stable
  http://support.Microsoft.com/mats/ie_performance_and_safety/
  Hope this information helps.

• Microsoft (C) Register Server has stopped working

  The error message "Microsoft (C) Register Server has stopped working" prevents me from opening any browser or my main console of Trendmico on my account administrstor of PC to the home address but strangely no this problem doesn't exist in the accounts no administrator on my PC at home. All the solutions out there? I use Vista Home Premium on 64-bit operating system.

  Thank you

  Hello

  Perform the steps suggested by Halima S from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/Microsoft-register-server-has-stopped-working/b579412f-ECA1-4551-981b-51c43ade93e0

  Hope this information helps.

• Critical errors dealing with MRT.exe and error messages "Services and controller app has stopped working".

  I get two error codes... "Services and controller app has stopped working" and "Windows has encountered a critical problem and will restart in a min. Please save your work." The only time where it does it but when I plug my cable network. Already ran sfc and found nothing. Ran malwarebytes and removed a lot of viruses, I picked up, but I think that something in my registry can be screwed up after trying to remove the said virus. I was getting some kind of error MRT.exe and I tired looking for things to the top on this but I think I can have messed up a registry that was loaded entry of this and it has damaged something.

  Someone at - it answers that do not involve me having to reformat and install a new OS. I bought the computer off of a friend and it's a custom-made computer, so I don't have Vista Disc... while hoping a good solution.

  Help me please! :)

  Thank you
  Bishop

  In addition to using an anti-virus, as Malware/spyware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you do not have a DVD of Microsoft Vista, borrow one from a friend.

  Read this tutorial on how to do a repair installation:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Regarding the relocation:

  You can borrow a suitable Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it > download/install the

  See you soon.

  Mick Murphy - Microsoft partner

• OverDrive Media 'transfer Assistant has stopped working ".

  I use the software OverDrive media console for years to download and listen to audio books from my local library. After the most recent update of windows 7 and the media console, I can transfer is no longer my audiobooks on my ipod. I've updated everything! When I click on the button transfer everything seems as it should. Then a box comes up and says "transfer Assistant has stopped working windows is looking for a solution..." I uninstalled and reinstalled the OverDrive and iTunes without success.  Any suggestion or help would be greatly appreciated.

  Hello

  You can get in touch with OverDrive to help.

  http://help.overdrive.com/customer/portal/articles/1481226

  Reference:

  http://help.overdrive.com/customer/portal/articles/1481730-having-trouble-

  Thank you.