Treredo Tunneling Pseudo-Interface driver for hp laptop 2289sx g6

Hello!

Hello

See the guide on the following link.

http://appuals.com/Microsoft-Teredo-tunneling-adapter/

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • Error message: Teredo Tunneling Pseudo-Interface driver must reinstall

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Original title: Error Message: Teredo Tunneling Pseudo-Interface driver must reinstall .__Not able to find this driver on the Microsoft Web site.

    Hi Tony,.

    ·        When and where exactly you see the error message?

    ·        You did changes to the computer before this problem started?

    You can follow the steps below and try to reinstall the drivers and see if it helps.

    a. Click Start.

    (b) in the search box type Start devmgmt.msc and press to enter.

    c. in the Device Manager, click the action tab, and then click Add legacy hardware.

    d. click next then select install manually in a list, then click Next. In the list select the network adapters.

    e. once everything loaded in the manufacturer column, select Microsoft, and then scroll all the way down in the column for network adapter.

    f. Select turedo tunneling adpter in the list, and then next to the installation.

    Following the steps above should help you to install the drivers.

    I hope this helps. Let us know the results.

    Thank you and best regards,

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • YOU NEED TO INSTALL TEREDO TUNNELING PSEUDO INTERFACE DRIVER, WHERE CAN I GET THE DOWNLOAD?

    YOU NEED TO INSTALL A TUNNELING PSEUDO INTERFACE DRIVER TOREDO. HOW CAN I GET A? I HAVE A HP2000 LAPTOP, AND I KEEP GETTING WARNINGS IT DOES NOT, AS WIFI DEVICES HAVV YELLOW YIELD SIGN WITH (!) IN THEM. I'M LOST, JOE - HE IS AWINDOWS 8 X 64

    Hello

    Please, do not type in uppercase.  It is difficult to read and is considered rude/scream.  Thank you.

    Follow the solutions listed here

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Teredo-tunneling-pseudo-interface-this-device/757db042-c91e-464c-B963-c1f442fdf925

  • Teredo tunneling Pseudo-Interface driver problem

    Hello.

    I was wondering if anyone else has had problems with this driver "teredo tunneling Pseudo-Interface"?

    I just bought a computer laptop sony vaio with windows 7 preinstalled (and a buncha need other nonsense that I don't really want or (?)), and from the day I brought it home I was getting blue screen breaks down every day, sometimes several times a day, with the 'bad pool head' as a reason.  (the computer used to determine tool wasn't bad RAM, which seems to imply bad driver any...)    After HOURS of research, relocation, etc. (and I'm really NOT very savvy... was a hellish nightmare of tedious) I found that my vaio under the "devices" window, said there was a problem with this driver.  I don't know what it is, how it happened on my computer and even after researching online, I can't even really tell what it is supposed to do.  I have since uninstalled/removed and for 48 hours up to now no blue screen... I keep the crossed numbers.

    even had squad geek of the best buy on line today, to try to make sure there weren't remainders hidden him somewhere and the gentleman, that I spoke also put doubt how it came to be installed on my computer, and how it got damaged.

    anyone has any comment on the issue, is known to cause problems or was my isolated problem? I have not intentionally saved all depressed, I have no idea how to do that, with regard to troubleshooting.

    any help is greatly appreciated.

    a life seriously "non-geek" in a world of geek...

    Hello

    Since this is a new computer, you really need to get Sony to repair or replace the system. BlueScreens
    on a new system of are NOT good and should be set by the manufacturer of the system.

    Sony - Contacts
    http://eSupport.Sony.com/us/Perl/contact-land.pl

    Sony - drivers
    http://eSupport.Sony.com/Perl/select-System.pl

    Sony - Support
    http://eSupport.Sony.com/

    -------------------------------------------------------------

    If you want to troubleshoot problems check this thread for more information on using BlueScreenView.
    MyEventViewer and other methods of troubleshooting BlueScreens - two top answers.

    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/8df6485a-50cc-4cdc-BE3E-0f05c7745117

    =================================

    Check these threads for the teredo pseudo-interface.

    http://social.answers.Microsoft.com/forums/en/w7network/thread/754c8f29-3a87-4E77-Babd-a69c8910e17e

    http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/757db042-c91e-464c-B963-c1f442fdf925

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Teredo tunneling pseudo interface of windows 8 pro driver works do not error code (code 10).

    Please answer as soon as possible... That's what it shows... code (10)... I tried to update the driver... It shows that it is the best driver available and installed in my camera...

    OT: teredo tunneling pseudo interface driver Windows 8 pro does not not work... Please help (code 10)... I tried to update shows it is updated and the best driver is installed on my laptop

    Hi Shilratna,

    The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

    I suggest you try the steps from the following link:

    FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
    http://support.Microsoft.com/kb/943104/en-us

    I hope this helps. Let us know if you have other problems with Windows in the future.

  • Download driver driver Teredo Tunneling Pseudo-Interface

    How to download the Teredo Tunneling Pseudo-Interface driver?

    It is a known problem if you have Zone alarm installed.  If you have installed remove it at least to check

    To disable Teredo tunneling 6to4 interface open an elevated command prompt and type

    netsh interface set terredo disabled state.

    To re - install
    Click Start.
    Type device manager in the start search box, and then open it.
    Click the Action tab on top and click Add legacy hardware
    then click next and next again, he will then scan and find nothing then click on the screen after that.
    Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it.
    To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.
    If there is no option "Add Hardware inherited", you need to connect the unit using the tunneling.

  • Problem with the HP 430 (bluetooth and teredo tunneling Pseudo-Interface) drivers

    Hello

    recently my bluetooth function cannot to connect to other devices... This is what happens to the Device Manager:

    What is teredo tunneling pseudo-interface is for? is it important?
    If so, how to solve this problem?
    How to solve the problem of the bluetooth?

    Generic Bluetooth adapter:
    USB\VID_03F0 & PID_311D & REV_0001
    USB\VID_03F0 & PID_311D

    Teredo tunneling pseudo-Interface:

    * TEREDO

    Go to Device Manager, right click on the device and select Update driver. Path to the .inf file that you downloaded for use.

  • Could not load the driver for Teredo Tunneling Pseudo-Interface

    Hello

    Does anyone know how to fix this problem (Vista) Business

    Product
    Teredo Tunneling Pseudo-Interface

    Problem
    Could not load driver software

    Description
    Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 10.

    Signature of the problem
    Problem event name: PnPDeviceProblemCode
    Architecture: x 86
    Hardware ID: * TUNMP
    Configure the class GUID: {4d36e972-e325-11ce-bfc1-08002be10318}
    The PnP problem code: 0000000-a
    Driver name: tunmp.sys
    Driver version: 6.0.6000.16386
    Driver date: 02/11/2006
    OS version: 6.0.6000.2.0.0.256.6
    Locale ID: 2057

    Additional information about the problem
    Bucket ID: 12121968

    Concerning
    Dave

    Hi Dave

    Can you please give us more information on your laptop and what is happening exactly?

  • Map Microsoft 6to4, ISATAP Adapter #2, #3, Teredo Tunneling Pseudo Interface, PCI Device do not work in my ASUS k55VM laptop. Help, please

    Map Microsoft 6to4, ISATAP Adapter #2, #3, Teredo Tunneling Pseudo Interface, PCI Device do not work in my ASUS k55VM laptop. Code 31 for others and for the PCI device is code 28.

    Hi Amit,

    Thanks for the reply.

    Step 1: Check out the link: http://www.microsoft.com/en-us/download/details.aspx?id=8957

    Step 2: See the articles for the problems of driver on the computer:

    Update drivers:

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Automatically get recommended drivers and updates for your hardware

    http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

    Note: The article applies to Windows Vista too

    Tips for solving common driver problems

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

    Step 3: Run the hardware troubleshooter

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    To solve the problems of slow computer performance:

    Optimize Windows 7 for better performance

    http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss

    How to make a computer faster: 6 ways to speed up your PC

    http://www.Microsoft.com/atwork/maintenance/speed.aspx#fBid=97QYdW2XfTc

    Ways to improve your computer's performance

    http://Windows.Microsoft.com/en-CA/Windows7/ways-to-improve-your-computers-performance

    Slow PC? Optimize your computer for peak performance

    http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=HVhJmdoAiKy

    Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    Please let us know the result. If the problem is still not fixed, we will be happy to help you further.

  • Teredo Tunneling pseudo-interface "could not load driver software error" windows vista business 32-bit

    I found "Teredo Tunneling pseudo-interface" which showed a yellow exclamation in device under network adapter & just below the Realtek PCIe Ethernet controller Manager & the error was that the driver does not work properly. This is why unfortunately I uninstalled the driver. now, who disappeared from the Device Manager & I can't find even after restarting the system.

    so kindly advise me what is the problem if it does not fit in its original location & how to get it in the Device Manager?
    Please find the screen pictures of the error for your reference on skydrive https://skydrive.live.com/#cid=D98B7D8BBADFB4CF&id=D98B7D8BBADFB4CF%21105
    Rgds,

    Hello Asif,

    Thanks for the reply.

    It could be that he was corrupt entry that has been duplicated. Uninstalling the one with the bang yellow doesn't cause problems with job entry.

    I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

  • TEREDO TUNNELING PSEUDO-INTERFACE DEVICE DOES NOT WORK CORRECTLY - ACCORDING TO AVG PC TUNE UP

    My laptop is a HP G7030EA - MS Windows Vista Home Basic 32-bit SP2 Intel Pentium Dual CPU T2330 @ 1.60 GHz, 1.0 GB RAM, Mobile Intel 965 Express Chipset Family, bought new in February 2008.  I have not changed any hardware, software, etc.  I do not use it for games, only for things such as e-mails and visit websites

    Until last month when my desktop computer broke, I used the laptop only occasionally as a backup of the computer.  It never quite worked and seems to be unable to handle several tasks at once, often taking minutes for Google to load.  When I get impatient and click the mouse too much I heard a horrible noise and the screen mouse cursor freeze for a minute or two.

    As the laptop has become my main computer at the moment, I downloaded AVG PC Tune Up to see if it would improve it performance has not helped.  I was surprised to see how much memory the AVG2013 anti virus program uses, but wonder if the speed of connection and freezing problems I experience result (AVG Tune Up conclusions on) the Teredo Tunneling pseudo-interface unit does not properly.

    I follow AVG on screen re boards: looking for a software driver update but none was found, and I got the message "the best driver for your device software is already installed.  Windows has determined that the driver software for your device is up-to-date, Tun Miniport, Microsoft Map.

    This left me confused.  If there is a problem with this device, no solution seems to exist.

    Any help that will allow my laptop to function normally is welcome.

    I understand that you want to know if the teredo adapter can cause performance problems.

    The teredo adapter should not cause performance problems.  It is really just used to allow devices work IPv4 with IPv6 Internet service provider.  If the ISP was using IPv6 and your system did not have the adapter teredo, so it wouldn't work properly with the service provider.  For now, IPv6 is a significant minority that the world continues to work on IPv4 as not all networks, Internet service providers, and businesses are not entirely passed to IPv6.

    This thread on the Microsoft forums goes into a little more detail about the adapter teredo including how to disable it so that you only see it in Device Manager.  Unless you are using IPv6, this shouldn't really be a problem.

    If you start in safe mode, the performance problem persists?  Turn on the computer and press F8 once per second for the Mode option, safe mode with networking.  This will help you to further isolate the performance problem.

    Furthermore, does this happen that the adapter is connected or not?

  • Teredo Tunneling Pseudo-Interface - This device cannot start. (Code 10)

    Original title: code10microsoft toledo tunnelling

    We think we've found a driver but we are not sure because he vomits again code.10

    Hello

    1. don't you make changes to your computer before this problem started?

    2. What is the brand and model number?

    If the device has a FailReasonString value in its hardware key, that string is displayed in the error message. The driver or enumerator places this registry string value there. If there is no FailReasonString in the hardware key, you receive the following error message: this device cannot start. (Code 10)

    You can try the following steps and check if that helps you solve the problem.

    Method 1:

    Open the Device Manager and the analysis of new hardware and select 'Show hidden devices' in the view menu and check if you find errors.

    a. Open command prompt with administrator credentials (type CMD and right - click Run as administrator).

    b. Type "netsh" and ENTER.

    c. Type "int teredo" and ENTER

    d. type 'set disabled state' and ENTER.

    e. open the Device Manager and uninstall "Teredo Tunneling pseudo-interface".

    f. Open command with administrator credentials prompt once more.

    g. type netsh + ENTER.

    h. Type "int ipv6" + ENTRY

    i. type 'set teredo client' + ENTRY

    j open the Device Manager and the analysis of new hardware.

    k. Select 'Show hidden devices' in the view menu. You will see now that she is present without errors.

    Method 2:

    If the steps above do not help, you can try to uninstall the drivers of the computer network and reinstall and check if that helps. Before uninstalling the network drivers, make sure that you download the latest drivers on the site of computer manufacturers. Follow the steps below to uninstall the network adapter.

    Follow the steps below to uninstall and reinstall the network card.

    a. click on start

    b. in the type of search box of start of "devmgmt.msc" and press enter

    (c) in Device Manager, expand network adapters

    d. right-click on the network adapter and uninstall.

    e. restart the computer, and then reinstall the network card.

    Note: When uninstalling device drivers make sure you put a check mark against 'delete the driver for this device '.

    I hope this helps.

  • How can I fix adapter Teredo Tunneling Pseudo-Interface of network problem that shows an indication of a problem in the Device Manager?

    I've never seen this problem before.  The yellow triangle with the exclamation point is visible on this network adapter called Teredo Tunneling pseudo-interface.  The driver update does not work, and apparently the last and the best driver is already installed for this device.  I tried to disable and searching for the hardware changes.  Whenever the device is displayed again with an indication of problems triangle and even yellow exclamation point.  It is said that the device cannot start.  I rebooted the machine to see if something has changed.  There can be no.
    I just uninstalled the device and scanned for hardware changes, but it has not been detected and remains missing under the network adapter category.  I ran diagnostic system provided by HP software, but nothing seems to be defective.

    Hello

     
     
    1. What is the code that you see under the status of the device and the exact error message?
    2 have you made changes on the computer before this problem?
    As you have already tried updating the drivers and still you face the same problem, you can try to uninstall the existing driver and manually download the stand-alone version of the driver and install it.
    Step 1: first of all, I would say you temporarily disable any security software and then try to install.
    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
    Step 2: Now try to install the drivers
    a. open the Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Device Manager.
    If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    b. identify the sound card, right-click on it and select Properties .
    c. go to the driver tab and click Uninstall to uninstall the driver associated with the device.
    Restart the computer and install the latest driver.

  • I have no sound it says windows Teredo Tunneling pseudo-interface must be re installed

    It isThere there's a problem with the driver for Teredo Tunneling pseudo-interface. The driver must be reinstalled.

    Hello

    I suggest you go to Device Manager and see if there is an exclamation in addition teredo tunneling. If Yes, then follow the steps in this link to update the drivers:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Teredo-tunneling-pseudo-interface-shows-a-yellow/e3d0f39a-EA05-492d-9E57-49508c5cc538

    If not, try running this fixit and check if it helps:

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

    It will be useful.

  • Teredo tunneling Pseudo-Interface desintaler

    Teredo tunneling Pseudo-Interface uninstall how to reinstall

    Hello

    Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

    http://support.Microsoft.com/common/international.aspx

Maybe you are looking for