'Trigger' rules the naming could be added?

Similar Questions

• Window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application when you try to run Microsoft solve this diagnosis

  Original title: Microsoft Fix it diagnosis

  I ran Microsoft solve this diagnosis. He gave me a window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application.  someone knows how to fix this?

  Thank you

  FOR EXAMPLE

  Hello

  Thanks for the reply. Until I'm your answer I have restored the laptop to the State of origin, with the possibility of restoring elements that had been added by the user. I'm trying to update windows, etc.. If I get errors or problems I will post them here. Thanks for your detailed response.

  Eddie

• The rule of naming feature can be overridden in some cases?

  As a Unique constraint , I have created includes 4 columns, enforcement of rules for naming in the table properties - even with the abbreviations for all tables and columns configured, it produces a constraint name that is 52 characters long (as shown in the picture at the bottom.)

  Is there a way of or change how the 'models of naming rules' are used in this way (on duress with several columns or can maker data provide a way to allow the end user to create a specific name for a constraint like this, but does not allow the "naming rules" substitute for subsequent executions (IE. ' ")  Thanks to a checkbox "Override")?

  

  

  Yes, you can use ' tools > Administration object name ' to lock names and they cannot be changed

  Philippe

• Who knows the rule of naming of webAccess URL generated by CR?

  I have some time access to my virtual machines via webAccess, bookmark the URL of the often used VMs sepecify (Summary tab, click on generate Virtual Machine shortcut.).

  but one day I found I can't access VM via a URL bookmarked, because it had been modified.

  I didn't know what a change from the VC or ESX will be the result of the URL changes.

  and I want to know the rule of naming of the random code of the URL?

  Hello.

  The only single parts of these URLs are the host name of the vCenter (or ESX/ESXi) and the virtual machine object id.  If you have moved the vm of the inventory or has nothing on the operational plan that would have changed the VM object Id, then the URL is probably invalid for that reason.  You can use the free RVTools to display the Id of the object for the virtual machine and try to change the URL accordingly, but it might be just as quick to re - create the URL again.

  Good luck!

• "The document could not be imported" - iBooks author help

  With the help of:

  MacBook Air OS X El Captitan 10.11.3

  Keynote 6.6.1

  I try to import a Keynote file into iBooks author using the Widget but get the following message is displayed:

  "The document could not be imported.

  Thoughts? Solutions?

  Some seem fine do in articles and videos online. Several times, I get the same message after trying several keynote files.

  Hey there jpatronic,

  I see that you experience a problem when you attempt to use a Keynote presentation with iBooks author. I have an article for you related to this topic, and it can be found here:

  You can also drag a Keynote (.key) file directly to the book page without adding a widget to Keynote first.

  Important: Images in a Keynote file should not be higher than 25 megapixels (5000 x 5000 pixels) or 50 MB.

  You can't interact with a Keynote slideshow in iBooks author, but readers can interact with it in the finished book.

  iBooks author: Add a Keynote file

  https://support.Apple.com/kb/PH2793

  Thank you for coming to Apple Support communities!

• Event trigger after the key (or scanned bar code)

  Hello

  I'm doing the following... I have a string field where the user enters a code or manually scan the code in it. Based on this code I want to trigger an event that will examine this code (string) and output to another channel (esssentially using a sequence dealing with an event). Using change of value allows to get what I want, if I were only to enter a value, but I have to be able to do that with multiple values. any help on how to address the issue would be appreciated. I'm using Labview 8.2

  Thank you!!

  TER:

  If you do a right click of your control of the chain, "Update value while typing" enabled? You may need to disable it to prevent the value of change event of firing until the entire string is entered.

  In addition, if you enable "Single-line limit", who will do the "enter" button to submit the value rather than adding a new line (which fires the value change event if you have disabled "update while typing".

• Trigger on the first attempt

   I'd like some help / advice on my LabView program (attached) please. In the VI, the MyVoltageTask_1 is configured as a voltage signal corresponding to a pressure change inside an enclosed cylinder. The signal is transmitted to the BNC 2110 DAQ board / PCI 6133 DAQ card via a differential pressure transducer. 
  
  Ideally, the program should trigger as soon as I let air into the cylinder and start acquiring data, and stop as soon as its done. However, LabView does not trigger when I let the air into the  cylinder on the first attempt, but if I exhaust the air and let it in again a second time, the program triggers and I can see a graph of the pressure trace. Please let me know if there is something I should / could change in the program to have the program trigger on the first attempt. Thanks!
  

  Have you try to change the slope falling upward? I begin to take a look at shipping the first examples. "" "Open Finder for example of OR and go to hardware input and output" DAQmx "analog measures" voltage. Take a look to the example called "Acq Cont & chart voltage-Int Clk - Analog Start.vi ' I contains the basic structure of what you're trying to reach.

• DAQ trigger on-the-fly reconfiguration

  Hello

  What is the correct way to reconfigure a data acquisition on the fly?

  Every 100 s I'm doing a 2000 point 4-channel triggered acquisition (sampling rate 50000)

  As a function of household, that I also want to monitor the voltage of one of the channels so that every 2 s, I do a single-point acquisition no trigger.

  Since I don't have access to a piece of the DAQ hardware, that I have to share channels between the two tasks of reconfiguration on the fly.

  (the program is too big / complex to post sorry)

  Initialize channels and relaxation (happens once at the beginning of the program):

  

  Get data every 100 s:

  

  Each 2 s get one sample of multichannel without triggering then restore the trigger:

  

  Please could someone explain when I have to use the 'task to start', 'stop task' and 'commit' aid is rather vague and unfortunately I find myself 'hacking' until it works, which is not the way I like to work! I use a USB-6211.

  The above program works OK, but has an intermittent (approx. every 10mins) error on the 'shutdown task"before returning to the trigger. (memory, the description was 'Task not over data acquisition')

  Thank you

  Al

  Al1234 wrote:
  ... Then this job is stopped and the original task is reconfigured...

  Al

  Simply set up once and just start and stop the job.

  I'm a guy sorta visual images will help us to help you.

  Ben

• input analog trigger on the door of the meter to measure the frequency of generation

  Hello

  I want to measure a frequency on the analog input, but it doesn't seem to work.

  I'm trying to work with DAQmx with the use of the ansi c standard.

  The first step, I've done was acquiring information on the analog input. With the use of a simulated device, it shows a sine wave on the entry.

  My next step is to generate a trigger for the meter signal, but this doesn't seem to work.

  I don't see how it is possible to connect the trigger on the entrance to the analog meter.

  For the creation of the analog input and relaxation, I use the following code:

  DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
  DAQmxErrChk (DAQmxCreateAIVoltageChan(taskHandle,"Dev1/ai0","",DAQmx_Val_Cfg_Default,-3.0,3.0,DAQmx_Val_Volts,NULL));
  DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandle,"",10000.0,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,1000));

  DAQmxErrChk (DAQmxCfgAnlgEdgeStartTrig (taskHandle, "Dev1/ai0 ', DAQmx_Val_RisingSlope, 0 '"));

  For the creation of the meter, I use the following code:

  DAQmxErrChk (DAQmxCreateCIFreqChan (taskHandle1, "Dev1/ctr1", "", 1 January 2000, DAQmx_Val_Hz, DAQmx_Val_Rising, DAQmx_Val_LowFreq1Ctr, 1, 4, "");)

  I hope someone could give me a hint.

  I also tried the examples that come with DAQmx but well I know this are only examples to counter with the help of the digital inputs.

  Thanks in advance.

  Hello

  You must use the exit event of comparison at the entrance of the meter. Change this property after the configuration string function.

  DAQmxSetChanAttribute (taskHandle1, "", DAQmx_CI_Freq_Term, Dev1/AnalogComparisonEvent);

  Kind regards

  Bottom

• What should I do when the display shows "at the service of the user could not connect. Unable to load the user profile... ?

  I connect to my profile and I am not able to log in. The display shows "at the service of the user could not connect. User profile cannot be loaded... » » ?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  -------------------------------------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  -------------------------------------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  -------------------------------------------------------------------------------------------------------------------------------------

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Locking XP! error "the system could not log. Make sure your username and domain are correct, then type your password again.

  Original title: Locking XP!

  I tried to read all the relevant messages and walked the Earth for this solution, if someone could help me I would be grateful.

  A dear friend died and I got his PC - a fast XP with SP3 which (elderly) she only used for web & email. His account has been "Judi".

  I noticed a while back that, on the logon screen, that there is another user called 'Fiona' (she told me an old co-worker who probably stayed with her).

  Now a friend in need of a very old HP PC Lions not having completely fortunately I managed to copy his files before he was insane - I offered this newer PC it after that I have "set up" for him.

  I put a new account in place on this new PC "Ken" has been added. Then, after the deletion of accounts Judi & Fiona, I cleaned the machine with MalwareBytes, CCleaner & defrag.  All is well now with only Ken appearing on the screen logon (with an image of the appropriate icon), that I used several times in the implementation of his e-mail account and move its acrossetc files. His password is empty.

  Being the only user now Ken, I thought that it strange would its user (only) one click each time to the 'Log in', so I searched and found a box that said something to the effect «... do not show a picture of connection...» » .  That started my problem!  Removing his login "icon" brings ONLY the following - FIONA!

  When connecting a Logon Message now says "the system could not log. Make sure your username and domain are correct, then type your password again.  Letters in passwords must be typed using the proper case" the choice for this error message is 'OK', which takes you to a login screen 'Type Win98' older Classic looking (no icon user) who was behind this logon Message, with (name) Fiona appears on the login screen (former) (full name and empty below the password) , with the choice to enter the password or a stop!

  Of course the password cannot be guessed (Yes - tried blank, admin, etc.) so the only choice is to stop.

  VA F8 at startup for 'Safe mode' goes to screen black WITH Fiona login screen as usual safe mode above and booting with the CD using NTPASSWD shows the usual 1) Administrator 2) 3) invited Ken and 4) Support Microsoft - NO FIONA is shown - and I put all these passwords to 'empty '. Of course repair and recovery repair 'R' does nothing on the removal of Fiona

  This translates the original message & Fiona connection again.  How can I return to screen "image icon" connection without losing files and mail Ken Ken. Where Fiona could hide when it is not a USER of the NET?

  Yet once again, I'd appreciate any help. Brian.

  You should be able to just select (click on) "Fiona", press the delete key, and then type any desired account name.  It doesn't work?

  If you cannot type on "Fiona" in the logon window, you can use the following procedure to modify the Windows registry... or you can take the computer to an independent repairer and ask them to fix it for you.  Don't go to a chain of stores, as a "geek squad" or BigBoxStoreUSA type of place.

  Go here--> https://www.raymond.cc/blog/how-to-edit-windows-registry-key-values-without-booting-in-windows/

  Choose method 1 or method 2.  I'm familiar with Hiren (method 2), but not with the program described in method 1 (even though it seems simple).  Any ISO file you choose, I suggest to download and use ImgBurn (free) to create your CD bootable from the downloaded ISO file.

  The registry key to change is in the same place as "userinit" (which is the example used in the article), so to follow 1-5 step method or method 2 for step 7.

  You will be at HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon

  In the right pane of the registry editor, you will see a large list of items.  Scroll down the page until you see LogonType and double-click it.

  In the "Value data" box, type 1, and click OK (1 is the same either hexadecimal or decimal).

  Close the registry editor, take the CD from the drive and reboot.  You should see the Welcome screen when Windows restarts.

• Error - the instruction at "0x7c923845" referenced memory at "0x00000000". the memory could not be "read". Computer Windows XP freezes when online.

  Original title: svchost.exe - Application error.

  When I'm online I get the error message appear as follows:

  Svchost.exe - Application error

  The instruction at "0x7c923845" referenced memory at "0x00000000". the memory could not be "read".

  Then my computer freezes

  Don't know what triggered it on my machine, I do not use 'messenger' , but I discovered that it was something to do with Windows. I have a Toshiba laptop, I finally ran the process of "adding value to products" using their 'product recovery disk '.  It took hours to reload everything and download the updates after the hard drive has been re-configured, but it seems to have solved the problems that I had with.  Radical solution, I know, but I'm not a "geek" so was becoming more frustrated with the constant "freezes" and poor performance.  I can only assume that my Windows XP system had somehow been corrupted.  It's all working fine now, fingers crossed!

• Hosts the naming - how to use VMware name instead of file name

  Please see attached file.

  All hosts based on the same models appear under the same name in hosts. Is it possible to configure vFoglight to extract the vCenter appoint to the host instead of using the file name of the VMware disk for guests of actual spending?

  You are looking in the wrong place in the object model.

  Machine virtual VMWare is an extension of the host object model.  Think of the host as the base model by the dealer and the virtual machine as the base model with all the bells and whistles added to make a street racer.

  If you enter a virtual machine name in the top search bar, you will see that the returned results include objects of different types, probably a Machine virtual VMWare and a host.  Select the virtual machine VMWare will take you to the model object VMWare-specific screens.  Similar results for HyperV, etc..

  There is always a host record for each virtual machine, just as each car factory has the model of base somewhere.  He just won't have all the bells and whistles.

  Looking at your attachment, I think that what you see on the dashboard can be what you see in Virtual Center.  Virtual machines have a name that appears on the list of the Virtual Center, which can be separated from the real name assigned to the VM inside the operating system.  If you fix the naming in VC, I think you will find that the correction automatically flows to vFoglight.

• The instruction at 0x76a10cb3 referenced memory at 0x00000008. The memory could not be read. Help, please

  I get a meassage on my phone that says: the instruction at 0x76a10cb3 referenced memory at 0x00000008. The memory could not be read.

  He completely disable any use in my computer. I haven't added any new software, it is just appeared while I was with my computer. No one knows what may cause this problem.

  When you run an application that was built by using Microsoft .NET Framework 1.1 and the application is under a heavy load and uses a lot of memory, you may receive the following error message:

  The instruction at '79259769 'referenced memory at "0x00000008" x 0. The memory could not be "read".

  http://support.Microsoft.com/kb/830724/en-us

  Try to download the latest version and check

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=17718

  Or

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=40779

• Why the MCU is automatically added to the conferences in TMS?

  Info:

  Endpoints: Tandberg 6000 MXP & 95 MXP

  TMS: 13.2.2

  Codian MCU 4510: Software version 4.4

  Tandberg GK: N6.3

  Tandberg BC: Q6.3

  When I create a conference at TMS and want an end point to compose our system to an MCU on another site (confined), the our local MCU is automatically added to the Conference, for some reason any.  For example, if I create a conference with room 123 and number 'Dial Out' external 2222222, TMS adds MCU of our system and forces to compose both room 123 and 2222222, which is totally useless.  This should be simply, what is the endpoint is, a direct line to 2222222.  Why the MCU is being added?  This will use licenses MCU in haste when it is not necessary at all.

  I went through TMS > administration tools > Configuration > General settings, network settings and conference settings and cannot understand why the MCU is added.  If we dial manually, no problem.  My goal is to automate the entire composition, however.

  Pointers?  I put some of the parameters of the TMS > Admin Tools > Configuration > Conference settings below.

  

  Luke

  Hello

  Reduce the bandwidth of conference help? TMS could add a MCU if it detects that one or more participants do not support the bandwidth conference.

  Kind regards

  Kjetil