Trouble connecting Netgear XS748T to Ubiquiti UniFi US-48-750W via Port SFP +.

Similar Questions

• Reference Dell 2824 / Ubiquiti UniFI / label Guest WIFI VLAN

  Hello

  I have a PowerConnect 2824 and two Ubiquiti UniFI APs which each is connected to a port on the 2824.

  UniFi access points create wireless networks and share among all radio configuration. These two APs publish two SSID, a protégé of personnel, another network wireless wireless network not protected for the guests. I have the ability to mark every wireless network that I want to.

  I want to use a VLAN to push traffic via the Dell switch on a DMZ port in our firewall.

  My original idea was to:

  1 tag the comments with 11 wireless network VLAN.

  2. let the unlabeled personal wireless network.

  3. set the trunks on the two ports that puts an end to the APs to allow marked and 11.

  4. Add an additional port on the 2824 11 membership only.

  5 connect the 11 only port to port my firewall DMZ.

  Here are my questions:

  1. a trunk port enable both unlabeled and package ID?

  2. If so, can I specify a port DROP packets not marked? (I want to prevent things not tagged to reach the DMZ port on the firewall).

  3 - does anyone see a flaw in my game to the top?

  Thank you

  m

  Yes, they should be able to achieve anything on the vlan 1. The personal wireless packets should come in unmarked and vlan 1 being without a label, that is where the packages will remain.

  2 comments wireless packages will come in VLAN tagged on 11 and be able to access what in the VLAN 11, g16, could probably leave g16 tagged VLAN 11 If your firewall can read tags VLAN

  Your installer should work fine. VLAN 11 only have access to the dmz on the firewall port.

• I have trouble connecting to google and hotmail error that appears without Ox80072EE7

  Program network network networking Internet Web site Site Web Web Site URL get error no 0x80072EE7

  I have trouble connecting to google and hotmail error that appears without Ox80072EE7

  Hello Arnold,.

  You can consult the following Windows Live support link and check if it helps.

  Windows Live Mail error 0x80072EE7

  Alternatively, you can publish your application in the Windows Live Forum for assistance.

  In the Windows Live Forum

  Because the error occurs when you access google too, you can also check with the support of Google.

  For help on Google, please refer to the Google Help Center.

• I have a Mid-2010 Mac Pro Tower running OS Yosemite to which I would like to connect a Tower (G-Technology) G-Speed Q RAID via eSATA connection.  What type of card PCIe eSATA should I install in my Mac Pro tower to enable such a connection?

  I have a Mid-2010 Mac Pro Tower running OS Yosemite to which I would like to connect a Tower (G-Technology) G-Speed Q RAID via eSATA connection.  What type of card PCIe eSATA should I install in my Mac Pro tower to enable such a connection?

  https://eShop.MacSales.com/item/NewerTech/MXPCIE2E2U3/

  https://eShop.MacSales.com/item/NewerTech/MXPCIE6G2S2/

  https://eShop.MacSales.com/item/NewerTech/MXPCIE6GRS4E/

  https://eShop.MacSales.com/item/sonnet%20Technologies/TSATA6PROE2/

• Suggestion for connecting NetGear switch for network home

  Hi all

  Recently, I bought NetGear ProSafe 8 - Port Gigabit Ethernet Switch GS108E. I would like to ask your help/suggestions to connect to my home network. The other components I have is Motorala SurfBoard SB6121 Cabel Modem and Cisco Valet M10 Wireless router.

  I have a Comcast Blast Plus service and if I check my internet speed by connecting my laptop directly to the cable modem, I get 50 Mbit/s Download and Upload of 11 Mbps. If I connect my laptop to the ethernet port of the router the speed I get is 25 Mbps download and still 11 Mbit/s upload. 50% reduction the internet download speed. So I decide to buy a NetGear Switch so that I can run all my connection cable of the switch and wait for the speed of download of 50 Mbps and 11 Mbps Upload.

  I made the connection like cable Modem--> Switch NetGear--> wireless router. In this configuration no my devices are able to connect to internet and I get message unidentified network. I tried to troubleshoot using the Windows Connection Manager, but he just asks me to turn off and on again. I tried this several times, but was not able to solve the problem.

  I want to return to the NetGear Switch mannual and made connections like shows in the quick installation guide. Cable modem-->--> Switch NetGear wireless router. In this configuration, all my devices are able to connect to internet but I get the speed of 25 Mbps download and 11 Mbps upload, identical to what I was getting into when running connection wireless router wired thorugh.

  So, essentially, NetGear switch does nothing for me except give me a few more ports to run the wired connections.

  It would be a great help if someone can guide me in the resolveing of my problem.

  Kind regards
  Shekhar

  He had bought a new router in the first place. Your router is the problem. Check on their website for a solution.

• help to connect netgear WN300RP

  Device management "connecting with the web browser installation guide" show different wireless network Manager screen to find 'NETGEAR_EXT (SSID)?

  I am on Windows 7

  Hello
  Check out the link and follow the steps to install a wireless network.
  Setting up a wireless network
  http://Windows.Microsoft.com/is-is/Windows7/setting-up-a-wireless-network
  You can also check this link for more information.
  5 steps: how to set up your network wireless home
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx#fBid=HlWv6_qhQuX
  You can also visit this link and check the installation guide and user manual.
  http://support.NETGEAR.com/product/WN3000RP

  http://www.downloads.NETGEAR.com/files/GDC/WN3000RP/WN3000RP_IG_13APR2012.PDF

• Having trouble connecting: a trackpad which does not of mouse and a little off screen graphics

  So, recently I had a problem with the connection on my MacBook Pro, my guess is that this happened just after the recent update to El Capitan 10.11.3

  While booting, the machine feels slower than it has been in the past and when I get to the login screen the built in trackpad and my magic mouse suffer from what can only be described as extreme lag. They are all two very unresponsive and there is a very long time to see any movement. When there is movement, it's as if he only had a little bit of the path being recorded there.

  Things I've tried so far:

  Reboot into recovery mode, in this case the mouse and trackpad work very well. If I restart things CIHI work normally, however, the guest account has a strange horizontal line and shading. This is my usual indication that I will be able to log on normally.

  I also tried resetting the pram, the smc, permissions repair, scheduled maintenance tasks and clear the caches. This has been done with Onyx for Mac.

  Could really do with a solution that it affects my work machine and of course to try to connect to my machine for 15-20 minutes every morning isn't very productive.

  Details of the system are as follows:

  Retina, 13-inch, early 2015

  Processor: Intel Core i5 at 2.7 GHz

  Memory: 16 GB 1867 MHz DDR3

  Graphics card: Intel Graphics Iris 6100 1536 MB

  Reset the PRAM.  http://support.Apple.com/kb/PH18761

  Reset the SMC. Choose the method for "on Mac Laptops with non-removable battery.

  https://support.Apple.com/en-us/HT201295

  Boot mode safe. http://support.Apple.com/kb/PH18760

• Trouble connecting my USB-6009 to matlab.

  I have a have trouble to do my version of Matlab recognize the USB-6009 case

  My setup
  Windows 7 Enterprise x 64
  MATLAB r2011b x 64 with daq Toolbox

  When I try to run the interactive session, I get the following error message:
  > session = daq.createSession ('or')
  > "The seller"nor"is not known. Use 'daq.getVendors ()' to a list of suppliers.

  Next step:
  > daq.getVendors)
  > Data acquisition supplier "National Instruments":

  ID: 'nor '.
  Full name: "National Instruments".
  AdaptorVersion: ' 3.0 (R2011b).
  DriverVersion: 'unknown '.
  IsOperational: false
  WARNING: The seller Diagnostic information: OR: there was a driver error while
  loading of the MEX file to communicate with the hardware from National Instruments.
  It is possible that the NOR-DAQmx driver is not installed or is older than
  the minimum required version of the ' 9.1'.»
  Additional information:
  ' Invalid MEX-file 'C:\Program Files\MATLAB\R2011b\toolbox\daq\daq\+daq\+ni\private\mexNIDAQmx.mexw64': the specified module could not
  be found. »

  I used the dependency walker tool and found lack dll

  My troubleshooting steps:

  1. Uninstall and reinstall USB6009 with the latest version of the driver and do all the updates
  2. Dependency walker use on Matlab tool

  These DLL seems to be lacking
  NICAIU. DLL
  API-MS-WIN-APPMODEL-RUNTIME-L1-1-0. DLL
  API-MS-WIN-CORE-WINRT-ERROR-L1-1-0. DLL
  API-MS-WIN-CORE-WINRT-L1-1-0. DLL
  API-MS-WIN-CORE-WINRT-ROBUFFER-L1-1-0. DLL
  API-MS-WIN-CORE-WINRT-STRING-L1-1-0. DLL
  API-MS-WIN-SHCORE-SCALING-L1-1-1. DLL
  DCOMP. DLL

  My preliminary conclusion is that there is a problem with the driver installation. Could you tell me that you might work better?

  I'm out of ideas.

  Best regards.

  You have installed the wrong driver. The base driver is mainly for Linux or Mac. You need the full version of DAQmx.

  http://www.NI.com/download/NI-DAQmx-15.1.1/5665/en/

• Im having trouble connecting my wireless laptop but the hard line is fine suggestions

  Anyone know what I need to do?

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. you receive an error message?

  Read the following article that may help you.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Having trouble connecting my Xbox 360 to an AD - HOC connection through my pc with a WIRED CONNECTION

  I followed these Instructions. http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Networking/Xbox-360-cant-connect-to-my-laptop-through-ad-hoc/d9be8009-1f68-4AC0-89a3-a8850b9d9f40

  I restarted my computer and it says that the IP etc should have automatically change and they do not have (the boxes are new, I chose the automatic function for the IP and DNS) help please my modem/router is 2 floors away and integrated for the 360 wireless adapter is not the greatest

  Hi Philippe,.

  Since the suggestions in the thread you mentioned did not help, I suggest you post your question on the Xbox forums.

  Forums - Forums Xbox - Xbox.com home

• Trouble connecting to internet with WRT160N

  I have problems with internet on my mac mini.  The mac mini is connected via ethernet and is really slow.  Sometimes, it works very well.  Other times looks like 3 tries to load a page.  Sometimes it does not.  You never know.  The thing is my macbook is connected wireless and works perfectly.  The mac mini is even when my macbook is disabled.  He didn't get it until I bought the router, and it worked very well the first days of use of the router.  Any suggestions?

  Is your router WRT160N v2 model? Then check if your firmware is build 11. If so, you should downgrade to build 8. We will be happy to help you with that.

• BlackBerry Z10 a Z10 works fine, the other one has trouble connecting to the mobile network

  Hi, my wife and I have the Z10, and we're both on the same mobile network (Wind Mobile to the Canada). Z10 wife seems to have no problem connecting or staying connected to Wind Mobile. Mine on the other hand seems to randomly drop the connection, or struggled to get connection and sometimes ends homelessness.

  The only difference between the two of the Z10 is its is purchased through Wind Mobile itself, it is locked to their network at the moment. I bought mine a little later and I bought mine directly via the webshop of Blackberry, and it's why, mine is unlocked. What I have to do sometimes is to disable the mobile connection and turn it back on and it works after I do this. However, it is annoying, as I would rather automatically retry the network connection so that it is not go roaming in my own city.

  It is possible that a new sim card can help. Worth a try. I'm guessing, however, that, since one is that she has the ability to see other networks when the locked is not unlocked.

  That said, I use a unlocked Z30 and don't have these problems. Try a new sim card and see what happens.

• Trouble connecting to PC.

  I tried to connect to my pc. But now I get the loading sign. I left it there a while and it still load. So I turned on and tried again. She still didn't work.sometimes that it will freeze too. I restarted and it always gave me this welcome sign. Whay is the problem with my pc? Please give me tips or something.

  Hello

  See if that helps you.

  "How to access the Windows Advanced Startup Options 8 or 8.1"

  http://pcsupport.about.com/od/Windows-8/a/open-Advanced-startup-options-Windows-8.htm

  "How Boot for advanced Windows 8 Boot Options and 8.1" . "

  http://www.eightforums.com/tutorials/4935-startup-options-menu-boot-Windows-8-a.html

  There are also detailed here.

  http://www.eightforums.com/tutorials/2843-automatic-repair-run-Windows-8-a.html

  

  ______________________________________________

  And please read this method:

  "How Boot for"System Recovery Options"in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

  

  See you soon.

• having trouble connecting to a specific Web site, trusted certificate message sometimes but not every time. Is there a way to manually collect a trusted certificate without having to do so via the message?

  trusted certificate message comes only from time to time, but we have exhausted all other alternatives, so we figure it must be the problem. can manually add us a certificate?

  https://www.gilt.com/

  This page is partially encrypted, something on this page are made from a non secure server.

• BlackBerry Smartphones Trouble connecting Telenav GPS Navigator on Nextel 8350i

  Whenever I try to use the GPS Telenav browser it gives me the terms of use and request a password to log in. He has never done before, I installed an update, and I never put any type of password. It offers no way to recover a password, or in any event continue on. Someone knows what to do?

  Go to telenav.com, and then click mytelenav the top of the screen. Get your PIN, then put your phone number to 10 digits. A text message will be paid to your phone giving you for your telenav account identification number. Then if it works then remove the application (options / advanced options/applications/tone clear telenav/menu/delete) the phone will reboot and when it comes back up just click on the icon to download it