Trouble using NI USB-4065 with virtual machine VMWare

Similar Questions

• Using static IP addresses with Virtual Machines

  I am stable and ESXi assessment and thus have an independent network to a server, the switch and the laptop (as a system admin). Being a newbie to VM I have not had the time to explore on the web, etc.!

  Problem is that I do not have a DHCP server, but each time the virtual machine at the start of the installation of the OS program, etc., that he tries to use...

  Is there an easy way to temporarily disable DHCP and assign static IP addresses to virtual machines? I look at the docs, this forum, etc... but I must be missing something.

  Thank you

  Date of arrival:

  -If the CD is bootable

  -the virtual CD-ROM is connected to the host ('Connected' and 'Connect' to power on is enabled)

  -the virtual CD-ROM points to your source (ISO, physical CD-ROM)

  Visit this link on how to deal with the virtual CD-ROM: http://pubs.vmware.com/vi3i_e35u2/admin/BSA_Configuring_VMs.16.6.html

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009

  Published by AWo

• I installed windows 7 on a mac with boot camp and then used parallels to create a virtual machine to run windows inside Mac os10.6. Now he says I need to activate windows again, but he said I need a new activation key. Any ideas would be appreciated

  I installed windows 7 on a mac with boot camp and then used parallels to create a virtual machine to run windows inside Mac os10.6.  Now he says I need to activate windows again, but he said I need a new activation key.  Any ideas would be appreciated

  Yes, you must purchase a full license for the second installation of Windows 7 product key.  1 activation allows only one Windows 7 product key.  Apparently, you now have a second facility that requires a second product key. Carey Frisch

• Only don't have a permit no cd! How to install a virtual PC with virtual machine? :(

  I got a computer with windows xp Pro and I lost to a virus. And I got a windows 7 that was unused, so I installed it and now I'm wondering. Can I continue to use the Pro license (and my windows 7 had a new virus so I did reinstall windows 7 and activated it right.) But then he broke again while I did the same thing and this time she didn't so I called and I was connected with 5 people and the 5th person fixed my license for the last time for free! Thank you microsoft! ;D )? And I can't find the cd for pro! And I tend to use the license and however you can get the installation to work without the disc on the virtual machine that you have made. PS I also say that I have the license but not the disk. What should I do?  DX

  Hi Alexander,.

  ·         Using Windows XP on the virtual machine?

  ·         What version of Windows 7 you have installed?

  If you plan to install Windows XP separately and have the dual-boot Windows XP and Windows 7, you must have a Windows XP disc. You can see the following link for more information.

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  If this is not enough, you can install Windows XP on Windows 7 using Virtual PC, unless you have one of the following editions of Windows 7 (Professional, Ultimate or Enterprise). This does not need to have the Windows XP disk.

  Windows XP Mode - Windows 7 features - Microsoft Windows

  Install and use Windows XP Mode in Windows 7
   
  Do not respond if you have any other questions.

• How to use a USB mouse with 8 Thinkpad?

  Hello!

  I would like to know how to use a USB mouse with 8 Thinkpad. Here in the Brazil, Lenovo does not sell any micro USB USB converters. So, I found on the market several options, but mainly focused for Android tablets and smartphones and not Windows 8.1 devices. He will work with a converter OTG? It supports this type of technology?

  Thank you!!

  You can use any cable USB OTG, it's just the cable and two connectors. I use this Setup with USB keyboard. But it is more convenient to use a Bluetooth wireless mouse.

• cannot select store with virtual machine

  Hello

  I want to configure RDM for a virtual machine that has been powered down. When I chose one to add a ROW to a READ, the "Store with virtual machine" option is grayed out, only 'Specifies the data store' is available. From what I had experienced, by specifying a data store (only the local data store unavailable to its host), this would avoid this VM vmotion when its current host has been disconnected.

  Please correct me if I'm wrong, but what is the reason for which a virtual machine would not be able to choose la carte READ my San to his record?

  See: http://kb.vmware.com/kb/1001856

• Report on the ability of virtual machines VMware Cluster

  We started to evaluate Foglight for capacity planning and evaluation. One of the reports that I believe is interested in our leadership is the "ability of virtual machines VMware Cluster" report. I see that the report provides a value for the VMS remaining. I would like to learn a little more about this value and how is it calculated:

  1. What exactly a 'virtual machine' represents in these reports?
  2. Can a similar report to run using a specific type of server based on the allocation of resources or patterned after an existing VM wokload?

  We are a small, medium and large VM offering based on the allocation of resources. I would like to change the report to display the number of each type of virtual machine I have available... or pointer pointing to an existing virtual machine, and according to its resources and workload, determine how this server, I have available.

  It is based on the average size of the virtual machine in the cluster.  If you look at the dashboard of capacity management in the user interface, it can give you more details by cluster.  It is based on the average of the use of min/max/AVG across all virtual machines in a period given (usually 90 days).  This can not be changed today, but there is work to allow lets you specify a size of slot for something as small, medium, large, etc...

  This feature exists in the Foglight for virtualization, however Standard Edition.  It might be interesting to watch this, if you need it sooner.

• Devices 6210 USB in a virtual machine using

  Hello

  I have a NI 6210 usb device which I want to use in a virtual machine running in Sun's VirtualBox.

  The host operating system is Vista, the operating system in the virtual XP machine.

  It seems as if between the two OS USB device sharing does not work correctly.

  I installed the drivers fpr the 6210 in both the host and the guest operating system.

  The device is correctly detected in the host operating system.

  What I want to do is use the usb device in the virtual machine only, there no need to be available in the host operating system.

  But when I run the virtual machine, it seems as if the usb toggle device between the host and OS invited frequently, i.e. in a second, it appears in the host operating system, in the next second it appears in the guest OS. Is there a way to "turn off" the device usb in the OS, host so that it can be used exclusively by the guest operating system?

  I also tried to use Windows7 as the host operating system but with the same result as described above.

  Thank you.

  Christian

  Hi Christian,

  Can you tell me which version of the DAQmx driver you use? I am aware of a case where he helps update version 8.9 the DAQmx. If you have an older version, please upgrade. I hope that you have added a filter to the VirtuaBox mentioned such in support USB in VirtualBox help file section 3.7.9.

  Concerning

  TomBaum

• How to use a USB microphone with voice dictation on MacBook Air?  Machine recognizes the USB device, but the microphone does not work.

  How to turn on a microphone USB bluetooth with voice dictation (Dragon for MAC) on the MacBook Air?  Machine recognizes the USB device, but the microphone does not work.   I don't see no response.   I use OS X 10.10.

  Version OS X?

• How to connect an external USB to a virtual machine?

  I'm having issues recognizing external USB (reader of my book essential 1 TB) disk in my Server 2008 VM.  I created a USB plugged into the host and restarted the server virtual machine controller and nothing is recognized.  Any ideas on how to get this working?

  You must be at 4.1 to function without the use of USB over IP

• Using the USB port on the machine host ESXi 4

  Is it possible to connect to the USB ports on the virtual machine host server? Documentation has said USB controller does not work with ESXi. Does perform a work around?

  Thank you

  Safar

  If you have a recent server that supports Intel Directed i/o / AMD IOUMMU, then you can try VMDirectPath - http://www.vm-help.com/esx40i/VMDirectPath/USB_Setup.php.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• How to configure rdm to use iscsi lun in a virtual machine using ms iscsi initiator?

  I have equallogic SAN attached to a cisco 3750

  switch. It comes to our storage network.

  Within the virtual machine for all readers of data other than my c:\ that has the operating system I would use iscsi data switch that has 4 network ports on four different nic cards already assigned.

  According to what I read a virtual machine can use only 4 nic so I have a Production network the other three that I would

  Use it for iSCSI data.

  Three ports of each virtual computer network for using ms iscsi with MPIO

  initiator.

  I have already attached the RDM using esxi 3.5 as a physical mapping of RDM.

  My question is how to configure the ports of the network adapter in the virtual machine?

  The VM network is on 172.19.2. * where iscsi is on 172.19.21. *.

  What would be the entrance on the network adapters in the virtual machine that is running ms win 2 k 3 r2 x 64.

  Thank you.

  ESX / Configuration / networking

  Propertties (near vSwtich3).

  On vSwitch object / change

  NIC Teaming tab.

  Menu of load balancing.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Problems when I want to update my complete system Mavericks using a USB key with the installation program.

  I want to "Refresh" my Mavericks home cleaning system and I still have a USB key with the complete installation program.

  With this USB key, I installed successfully already before Mavericks. Now, I want to repeat the installation by booting from USB key. But when the installation starts early an alert appears, said something like "... the verification failed - something is changed on the volume...". "and the cant of the installation continues.

  I've archived the original "OS X Mavericks installieren.app" from the app store and I have properly prepared another USB key using the terminal app, referencing the original installer, but I still get this alert when I try to install with this new USB.

  It is necessary for me to work with the Mavericks, because it's the latest version of the system on which I can run Adobe Creative Suite CS6 correctly. With the later versions of OS X, I get problems on my Mac Pro (end of 2008).

  I wonder what could happen with my first USB data, as I have already installed Mavericks successfully with it under the same conditions and after that he never touched the stick again so far. What can I do? What is the reason for this? Y at - there a site where I can get help or advice to solve the problem or if necessary can I re-download an Installer 'fresh '?

  Thank you and what is Berlin

  You can make a bootable USB to install using this free program that will do all the work for you. Try running disk utility/repair disk be before installation.

  Bootable USB Flash Drive-Diskmaker X

• using NI USB 9201 with LabVIEW Real-time

  Hello

  I try to use a USB of NI 9201 on a remote real-time target. Here's what I did: 1) tricked out of a desktop PC to serve as target RT using the instructions provided on the Web site of NOR. He now starts in an RTOS with LabView RTOS 9.0. (2) I communicated successfully with the help of a host computer that has a windows with LabView 2009 BONE and I installed the software from the computer remote RT target host using ethernet. However, my problem is when I plug NI 9201 USB on the target RT that I do not see the material listed on the devices tab in MAX and interfaces on remote systems. I tried to get the manuals for the HW 9201, but it seems not much explained here, or maybe I'm looking in the wrong places. Any help is greatly appreciated.

  PS: I am attaching 2 JPEGs for additional explanations (tab network settings and the settings of the system).

  Thanks in advance,

  Benoit.

  AVS,

  9201 USB is not supported on RTPCs please visit this link. Currently no usb-DAQ devices do not support an environment CRPC. Only the PCI DAQ devices are supported.

  http://zone.NI.com/DevZone/CDA/tut/p/ID/6913

• Access to the BlackBerry through the USB port on the virtual machine VMWare

  I have my development environment configuration in VMWare virtual machine, and I have no problems of deployment of BlackBerry applications on a simulator that runs as another virtual machine. The problem starts when I try deploying to the device via the USB port. The address is assigned when the mode of development on the device is not accessible from the VM, but only from my host, who do me any good, since as I said my IDE is in the virtual machine. A way to solve this problem? I can still deploy to the device via wi - fi (which is btw access via different ip - one given by the network) by this can sometimes be slow depending on the strength of the signal, etc, so I prefer to be able to deploy via the USB port.

  Just in case anyone has the same problem, how to activate must, VMWare Player click on the USB icon (to the right) and choose to disconnect from the host. Connecting the USB port at the prompt. Stupid...