trruncate the log file alert
HelloI have an Oracle 10 g installed on Windows 2008 r2. I want to check the alert file to investigate something. But the alert log itself is approximately 1.2 MB, it is very difficult to open with Wordpad and Notepad. If I don't like historical information, can I I just open the alert log file manually delete everything inside and to save it and do this weekly? Or if you have any good suggestion?
the file that is located at:
e:\oracle\database\product\10.2.0\admin\orcl\bdump\alert_orcl.log
Hello
To do this, since you are on windows, argue some more text editor that can take care of some large files.
Other than that, if you do not want your alert log that would be huge if you want specific entries in the file, just move the old file or rename it before starting your activity you want to monitor. Database server will create a new file for you and which will logically be truncated for you.
Thank you
Navneet
Tags: Database
Similar Questions
-
process that is writing to the log file alerts
Hi friends, what process writes to the log file of alerts?
is there a specific background assigned process to do this action?Hello
AS FAR AS I KNOW... It is not a specific process to write in the alerts log or trace files. Each background process can write to a trace file associated with respective on the server. Whenever the process detects an internal error, it written in the trace files.
-Pavan Kumar N
-
Check alert event ends in error, the log file has no error message
Hello
We are 11.5.10 in 12.1.3 reclassification. Check alert event ends in error, the log file does not have any information. This alert is on. oe_order_headers_all alert works well in 11i.
12.1.3
Database 10g
Enjoy all the entries.
I noticed that the operating unit parameter is passed as NULL, don't know if this is causing the problem.
K926765 wrote:
HelloWe are 11.5.10 in 12.1.3 reclassification. Check alert event ends in error, the log file does not have any information. This alert is on. oe_order_headers_all alert works well in 11i.
12.1.3
Database 10gEnjoy all the entries.
I noticed that the operating unit parameter is passed as NULL, don't know if this is causing the problem.
K
Please see if (OE_ORDER_HEADERS_ALL (check event Alert) ends in error for all orders introduced [1322052.1 ID]) help.
Thank you
Hussein -
Generate the log file for the dialog box
Hi all
I'm generating information for the dialog box as a .txt log file format. That means that if the box is checked, the log file will be give ' checkbox1 - 01.» Check the report, sizes against the information on tickets and slug jobs"is checked
If the checkbox is not checked, the log file will be give ' checkbox1 - 01.» Check the report, sizes against ticket and slug information on employment"is not checked
and also the entry "myText2" also needs to generate the log file
Can someone help on this... Help would be appreciated!
var l is new window ('dialogue');.
myGroup1 var = w.add ("panel", undefined, ' P & & G check the list ');
myGroup1.alignChildren = 'left ';
CheckBox1 var = myGroup1.add ("checkbox", not defined, '01. (Check the ratio, size against the information on tickets and slug jobs");
CheckBox2 var = myGroup1.add ("checkbox", not defined, '02. "" "Check images are linked");
var checkbox3 = myGroup1.add ("checkbox", not defined, '03. Visually check the progress of KV/model/CP images");
var checkbox4 = myGroup1.add ("checkbox", not defined, '04. Visually check the progress of other elements such as Logo and bottle");
var checkbox5 = myGroup1.add ("checkbox", not defined, '05. Check the positioning of the markup language");
var checkbox6 = myGroup1.add ("checkbox", not defined, '06. Ensure that all measures are calculated Live based area");
var checkbox7 = myGroup1.add ("checkbox", not defined, '07. After that the resizing of the picture KV frame open to cut and bleed");
var checkbox8 = myGroup1.add ("checkbox", not defined, '08. Complete Magenta if there is insufficient image');
var checkbox9 = myGroup1.add ("checkbox", not defined, '09. ("To ensure that the document's bleed, crop gutter and slug information brands ');
var checkbox10 = myGroup1.add ("checkbox", not defined, '10. Make sure that the final work is updated on the server");
var checkbox11 = myGroup1.add ("checkbox", not defined, '11. ("Enter time cmd");
var myGroup2 = w.add ('panel', undefined, 'The operator name');
var myText2 = myGroup2.add ("edittext", undefined, "");
myText2.characters = 25;
myGroup2.orientation = 'left ';
var buttons = w.add ("group");
Buttons.Add ('button', undefined, 'Export to PDF', {name: 'ok'});
Buttons.Add ('button', undefined, 'Cancel');
w.Show ();
~ group();
~ If (myGroup1.alignChildren.value! = true) {}
~ alert ('yes')
//~ }
myDoc = app.activeDocument;
w = [];
DESCRIPTION: Make a TXT file
myDoc = app.activeDocument;
Log1 = makeLogFile (app.activeDocument.name.split('.') ([0], myDoc, true);
log (log1, app.activeDocument.name);
~ log2 = makeLogFile ("test", myDoc, false);
~ Journal (log2, "Text file log base 2");
Log1. Execute();
~ log2.execute ();
function makeLogFile (aName, aDoc, deleteIt) {}
var logLoc; path to the folder that will contain the log file
try {}
logLoc = aDoc.filePath;
} catch (e) {}
logLoc = getmyDoc (). parent.fsName
}
var queue = aFile (logLoc + "/" + name + ".txt");
If {(deleteIt)
aFile.remove ();
return aFile;
}
var n = 1;
so that {(aFile.exists)
aFile = File (logLoc + "/" + String (n) + ".txt" aName);
n ++
}
return aFile
}
function getScriptPath() {}
try {}
Return app.activeScript;
} catch (e) {}
Return File (e.fileName);
}
}
function log (aFile, message) {}
var today = new Date();
If (! aFile.exists) {}
do the new log file
aFile.open ("w");
aFile.write (String (today) + "\n");
aFile.close ();
}
}
function log (aFile, message) {}
var text = o;
If (! aFile.exists) {}
do the new log file
aFile.open ("w");
aFile.write (message + "\n" + "\n" + String (w) + "\n");
aFile.close ();
}
~ aFile.open ("e");
~ aFile.seek (0.2);
~ aFile.write ("\n" + message);
~ aFile.close ();
}
myDoc.close (SaveOptions.no);
Thanks in advance
Steve
Hi Steve,.
There are some errors in your code.
- function 'getmyDoc' is used, but not created.
- fucntion 'getScriptPath' is created but not used. (In any case, this will not give you error)
- function 'journal' has defined two times with the same length of the parameter.
etc...
Here, I have modified your code. Try this.
var w = new Window ("dialog"); var myGroup1 = w.add('panel', undefined, 'P&&G Check List'); myGroup1.alignChildren = "left"; var checkbox1 = myGroup1.add ("checkbox", undefined, " 01. Check the ratio, sizes against job ticket and slug information"); var checkbox2 = myGroup1.add ("checkbox", undefined, " 02. Check images are linked"); var checkbox3 = myGroup1.add ("checkbox", undefined, " 03. Visually check the progression of KV/Model/CP images"); var checkbox4 = myGroup1.add ("checkbox", undefined, " 04. Visually check the progression of other elements like Logo and Bottle"); var checkbox5 = myGroup1.add ("checkbox", undefined, " 05. Check the placement of Language Tagging"); var checkbox6 = myGroup1.add ("checkbox", undefined, " 06. Ensure that all measurements are calculated based on Live area"); var checkbox7 = myGroup1.add ("checkbox", undefined, " 07. After resizing the KV image frame opened up to trim and bleed"); var checkbox8 = myGroup1.add ("checkbox", undefined, " 08. Fill Magenta if there is inadequate image"); var checkbox9 = myGroup1.add ("checkbox", undefined, " 09. Ensure the document has bleed, crop marks, gutter marks and slug information"); var checkbox10 = myGroup1.add ("checkbox", undefined, " 10. Ensure the final artwork is updated in the Server"); var checkbox11 = myGroup1.add ("checkbox", undefined, " 11. Enter time in CMD"); var myGroup2 = w.add('panel', undefined, ' Operator Name'); var myText2 = myGroup2.add("edittext", undefined, ""); myText2.characters = 25; myGroup2.orientation = "left"; var buttons = w.add ("group"); buttons.add ("button", undefined, "Export PDF", {name: "ok"}); buttons.add ("button", undefined, "Cancel"); w.show (); myDoc = app.activeDocument; log1 = makeLogFile(app.activeDocument.name.split('.')[0], myDoc, true); log(log1, app.activeDocument.name); log1.execute(); function makeLogFile(aName, aDoc, deleteIt) { var logLoc = ""; try { logLoc = aDoc.filePath; } catch (e) {} var aFile = File(logLoc + "/" + aName + ".txt"); var n = 1; while (aFile.exists) { aFile = File(logLoc + "/" + aName + String(n) + ".txt"); n++; } return aFile } function log(aFile, message) { var text = w; var rep = ""; if (!aFile.exists) { aFile.open("w"); var today = new Date(); rep += String(today) + "\n"; rep += message + "\n" + "\n\n"; for(var i =0;i
Kind regards
Cognet
-
Change the column header in the log file
Hi people,
I have a small program running to collect and record the data in a file.
The log files to a CSV file correctly, but the column headers show as "Untitled".
How to set these to something meaningful?
Had a hunting around, but can't find the settings.
Any help gratefully received!
See you soon
Duncan
Finally managed to find a Community position covering cela.
Check out this post fior details:
-
imageFORMULA CR-180 check the log file to scan
Hello
I work with an imageFORMULA CR-180 check Scanner and when executing a good amount (longer than 100) of the controls, I noticed that the scan control stops and a pop-up window appears on the Analysis ToolPak asked if I would like to replace my log file and start over.
The software that I use is called "Utility scan for CR-180II" and the log file contains the information of MICR line controls scanned, as well as the date of the analysis, and the location of the file to the images captured from the parser.
Log file options under "Options-> MICR data parameters.
What I do, it is by clicking on ' no, I want to overwirte the file ", stop the scan, moving the log of the 'old' file, restart the scanning and backup to a new log file.
Is there anyway to work around this problem and record continuously in the same log file?
Is there a memory limit on the scanner?
This is the Web page of the scanner that I use:
Hi lendjones!
Thanks for posting in the Forum! Canon does not provide direct support for imageFORMULA product series, but your dealer will be able to help you! If you do not have a reseller, please call us at 1-800-OKCANON (652-2666) and we will be happy to provide you with dealers who are in your area.
-
KB2686509 fails to install, said lack of prerequisite useful and check the log file.
I am running Windows XP on a Toshiba Satellite computer laptop, Intel PIII, 847 Mhz processor. I installed SP3.
Here are the contents of the log file:
3,695: 17:49:52.498 27/01/2013 (local)
3,695: c:\fb66e1fe6323f2b745bfc5d1\update\update.exe (version 6.3.13.0)
3.755: DoInstallation: GetProcAddress (InitializeCustomizationDLL) returned: 0x7f
3,775: hotfix started with following command line:
3,775: in function GetReleaseSet, line 1211, RegOpenKeyEx failed with error 0x2
3,775: in function GetReleaseSet, line 1240, RegOpenKeyEx failed with error 0x2
3,805: CreateUserInterface: GetProcAddress for DefineInstallCustomUI failed: 0x7f
3.946: return the value of IsMachineSafe = 0
3.946: IsMachineSafe return 441092
3.946: condition in Prereq.IsMachineSafe.Section failed with the fist
3.946: Check condition for 1 line of prerequisite returned FALSE
3.956: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
3.966: KB2686509 Setup has encountered an error: Setup cannot continue because one or more prerequisites required for the installation of KB2686509 failed. For more details, check the c:\windows\KB2686509.log log file
3.996: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
3.996: Setup cannot continue because one or more prerequisites required for the installation of KB2686509 failed. For more details, check the c:\windows\KB2686509.log log file
13.830: message displayed to the user: Setup cannot continue because one or more prerequisites required for the installation of KB2686509 failed. For more details, check the c:\windows\KB2686509.log log file
13.830: user input: OK
13.830: Update.exe extended error code = 0xf0f4
13.830: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.Here is the content of the faultykeyboard log file:
kbdsp.kbd
kbdsp.kbd
kbdno.kbd
kbdla.kbd
kbdla.kbd
kbdla.kbd
kbdla.kbd
kbdla.kbd
Kbdus.kbd
kbdla.kbd
Kbdus.kbd
kbdla.kbd
kbdla.kbd
kbdla.kbd
kbdla.kbd
kbdla.kbd
kbdla.kbd
kbdla.kbd
kbdla.kbd
kbdla.kbd
kbdla.kbd
kbdla.kbd
kbdla.kbd
kbdycl.kbdThanks for your help!
I've seen this before. Check this.
-
Is this OK to remove most or all the *.log files?
Windows XP Media Center Edition SP3 on Gateway Intel system double heart Hz 6300, 1.86, 3.24 GB/ram, 320 GB hard drive.
He is allowed to delete most or all the *.log files, or would be a serious mistake?
I never used for anything else than to troubleshooting, then very rarely. So I would delete them to your heart's content. However, I must point out that they do not have enough disk space amount to something meaningful, so there is really no need to worry about them.
I hope this helps. Good luck.
-
Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?
I use the version of Vista Home Premium.
While I don't really like how the UAC area enters the information that tells it when to display the box tell me about your work of things on the UAC (I know an article exist on the web), is not how to answer this question.
There is no log of UAC elevation file.
-
Original title: opening of the pop ups
I have Vista Home version. When I connect, I get the pop - ups following:
1.) _Windows sidebar Settings.ini. is used by another system.
Recorder 2.) WARNING: Logger! Initialize is not yet call... The log file can corruption exp.
3.) down the application did not start.
Also: while I'm on the internet a pop - up occurs from time to time indicating: "Internet Explorer has stopped working". Sometimes I get started, and sometimes I can just 'X' out and I'm always on.
Hello
1 how long have you been faced with this problem?
2 did you recent hardware or software changes to your computer before this problem?I suggest you try the procedure below.
Step 1: Try to perform the clean boot in order to solve startup error messages.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135
Step 2: I suggest you try the steps outlined in the article below to solve the problem of internet Explorer.
http://support.Microsoft.com/kb/936213Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
1st problem = Error 1606% APPDATA % and 2nd problem = WARNING Logger: initialize() is not yet known. The log file may experience corruption...
Try this FixIt:
Code error '0 x 80070646', '646', or '1606 ' when you try to install Office updates
http://support.Microsoft.com/kb/2258121
André
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
What should I do: an error has occurred. Check the log file. C:\User\---\PamperedPartnerPlus\workspace\.metadata\.log.
See this post and follow the instructions to update your program to possibly solve the problem.
Technical support
http://www.chefsuccess.com/F46/tech-support-41431/ -
Send the log file only works on Simulator
Hello together,
I added the ability for our users to send a log file of the application for me (author). Its a business application. We have now deployed version and now the log file is NOT attached to the email.
The code I am using:
void ApplicationUI::sendLogfile() { InvokeRequest request; request.setAction("bb.action.COMPOSE"); request.setMimeType("message/rfc822"); QVariantMap data; data["to"] = (QVariantList() << "[email protected]" << "[email protected]"); data["subject"] = "ceAuToApp Logdatei"; QString fileName = QString("log.txt.%1").arg(QDate::currentDate().toString("yyyy-MM-dd")); QString filePath = QString("logs/%1").arg(fileName); QString logpath = QString("shared/misc/%1").arg(fileName); QFile::remove(logpath); QFile::copy(filePath,logpath); QString logpathEncoded = QString(QUrl(logpath).toEncoded()); data["attachment"] = (QVariantList() << logpathEncoded); QVariantMap moreData; moreData["data"] = data; bool ok; request.setData(bb::PpsObject::encode(moreData, &ok)); InvokeManager manager; manager.invoke(request); }
QML:
Button { text: qsTr("Logdatei an Entwickler senden") onClicked: { _ApplicationUI.sendLogfile() } horizontalAlignment: HorizontalAlignment.Center }
Any ideas why it works on Simulator as well as on the device (running in developer mode) but not within the company? Thanks for your help.
Sven
He got together with the following code:
void ApplicationUI::sendLogfile() { InvokeRequest request; request.setAction("bb.action.COMPOSE"); request.setMimeType("message/rfc822"); QVariantMap data; data["to"] = (QVariantList() << "[email protected]" << "[email protected]"); data["subject"] = "ceAuToApp Logdatei"; QString fileName = QString("log.txt.%1").arg(QDate::currentDate().toString("yyyy-MM-dd")); QString filePath = QDir::currentPath() + QDir::separator() + QString("logs/%1").arg(fileName); QString logpath = QDir::currentPath() + QDir::separator() + QString("shared/misc/%1").arg(fileName); QFile::remove(logpath); QFile::copy(filePath,logpath); QString logpathEncoded = QString(QUrl(logpath).toEncoded()); data["attachment"] = (QVariantList() << logpathEncoded); QVariantMap moreData; moreData["data"] = data; bool ok; request.setData(bb::PpsObject::encode(moreData, &ok)); InvokeManager manager; manager.invoke(request); }
-
I tried to install EBS 12.2.5 on OL 7.1 with rapidwiz and got this error when applying the unique patches in second File System
"Second system logfile file - /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log.
LOG FILE:
_____________________________________________________________________________________________________________________________
Step 0-8
Command: /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh
Step 4 of 8: UNIX making pretreatment
Running: chmod 777/db/oracle/OraInventory r
chmod-r 777/db/oracle/OraInventory succeeded
Step 4 of 8
Performance: known appltest - c "/ app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh".
PHASE of INSTALLATION has BEGUN: APPS TECH STACK: Wed Dec 2 17:27:07 IST 2015
runProcess_1
StatusString installation of Applications Technology Stack
Copy the temp area models
Inventory name is: app_oracle_TEST_fs2_Oracle_EBS_app
One-time fixes copy to temp area
Remove JDK_TOP: / app/oracle/TEST/fs2/EBSapps/comn/util/jdk32 if there is
/ App/oracle/TEST/fs2/EBSapps/comn/util/jdk32 deleted directory
Installation of WebLogic Server.
With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml
L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml oracle.apps.fnd.txk.config.InstallService
WebLogic Server successfully installed
Web Tier utility installation.
With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml
L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml oracle.apps.fnd.txk.config.InstallService
Level successfully installed Web utilities
Registration EBSUsing /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml
L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml oracle.apps.fnd.txk.config.InstallService
EBS registered successfully
Rename/home/appltest/bea/beahomelist in /home/appltest/bea/beahomelist.29266 to avoid problems during WLS
patching
/ Home/appltest/Bea/beahomelist renamed successfully.
Application of ad hoc patches
With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml
L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml oracle.apps.fnd.txk.config.InstallService
Fatal error: T2K install Service
oracle.apps.fnd.txk.config.ProcessStateException: OPatch process failed: Output = 1 see log for more details. CMD = perl /app/oracle/TEST/fs2/FMW_Home/webtier/OPatch/opatch.pl apply - verbose - silent - ocmrf /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd/admin/template/txkForms_ocm.rsp jdk - / app/oracle/TEST/fs2/FMW_Home/webtier/jdk/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/patches/7695070/7695070
at oracle.apps.fnd.txk.config.OPatchActionNode.processState(OPatchActionNode.java:312)
at oracle.apps.fnd.txk.config.PatchActionNode.processState(PatchActionNode.java:187)
at oracle.apps.fnd.txk.config.PatchNode.processState(PatchNode.java:338)
at oracle.apps.fnd.txk.config.PatchesNode.processState(PatchesNode.java:79)
at oracle.apps.fnd.txk.config.InstallNode.processState(InstallNode.java:68)
at oracle.apps.fnd.txk.config.TXKTopology.traverse(TXKTopology.java:594)
at oracle.apps.fnd.txk.config.InstallService.doInvoke(InstallService.java:224)
at oracle.apps.fnd.txk.config.InstallService.invoke(InstallService.java:237)
at oracle.apps.fnd.txk.config.InstallService.main(InstallService.java:291)
Can not install the unique patches
RW-50010: error:-script returned an error: 1
RW-50004: Error Code when you run the external process. Check the log file for more details.
It was recorded in /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log and I don't know how to find another newspaper for such details as mentioned in this journal. Please help me with that.
Concerning
KasunA
Found a workaround. The problem is that, before the 7695070 patch is applied, the installation program backup directory/apps/fs2/FMW_Home/webtier/jdk
in /apps/fs2/FMW_Home/webtier/jdk_backup_existing_version, but then it clears. / jdk - the patch fails because it can't find it. I had to rename the directory of the jdk for jdk2, and as soon as it gets deleted quickly and rename jdk2 jdk. Then he applies the patches without problem. A symbolic link would do the same thing. -
Hello
I have installed:
-(Oracle Linux) OL 6.6
121 GB HD
5.0 GB RAM
-JDK-7u80-EA-bin-b05-Linux-x64-20_jan_2015.tar.gz (Java)
-Fmw_12.1.3.0.0_infrastructure.jar (infrastructure)
-Fmw_12.1.3.0.0_ohs_linux64.bin (SST)
I try to install OBIEE, I unzip these files:
-bi_linux_x86_111170_64_disk1_1of2.zip
-bi_linux_x86_111170_64_disk1_2of2.zip
-bi_linux_x86_111170_64_disk2_1of2.zip
-bi_linux_x86_111170_64_disk2_2of2.zip
-bi_linux_x86_111170_64_disk3.zip
I run/home/oracle/OBIEE/Disk1/runInslaller and open the screen to select the oraInventory directory, when I click OK, the error message appears (see image below):
[oracle@localhost Disk1] $. / runInstaller
Iniciando Universal Oracle install...
Espaço Verificando Temp: deve ser superior a 1536 MB. Passado Reais 36602 MB
Verificando swap Espaço: deve ser superior a 500 MB. Passado Reais 2553 MB
Verificando monitor: deve ser configurado para exibir pelo menos 256 cores. Reais 16777216 Passado
2nd para iniciar o Oracle Universal Installer from/tmp/OraInstall2015-09-13_08-13-50 h Aguarde... [oracle@localhost Disk1] $ 13/09 / 2015 20:13:53 oracle.as.install.bi.util.ConsumerUIProperties getCustomPropertiesFilename
INFO: Using a custom UI properties of the oracle/as/install/bi/config/consumer-ui.properties file
[ERROR]: error initializing log values
oracle.as.install.engine.exception.LogInitializeException: Espaço insuficiente para criar os log archives na Localização address para o inventario. Espaço shouts ob o inventario especificado/home/oracle/oraInventory UO aponte para outro inventario
to oracle.as.install.engine.logging.EngineLogHelper. < init > (EngineLogHelper.java:65)
at oracle.as.install.engine.logging.EngineLogHelper.initialize(EngineLogHelper.java:192)
to oracle.as.install.engine.InstallEngine. < init > (InstallEngine.java:135)
to oracle.as.install.engine.InstallEngine. < clinit > (InstallEngine.java:130)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:603)
In English:
oracle.as.install.engine.exception.LogInitializeException: not enough space to create the log files in the location specified in the inventory. Create a space under the null specified inventory or to point to a different directory
What can be?
Well, you very probably not a lot of space on the left under/Home.
You can move to another location that is located on/home/oracle/orInventory the / partitioning of the partition where you probably have more space left if you used the default value.
For example, as a root user:
mkdir/U01
MV/home/oracle/oraInventory/U01
Update /etc/oraInst.loc and replace
inventory_loc = / home/oracle/oraInventory
with
inventory_loc = / u01/oraInventory
Maybe you are looking for
-
Alert when adding to playlist duplicate songs?
I build my playlists over time based on the music I hear - either through my own music or songs that I hear while listening to playlists or radio on music from Apple. Sometimes I'll see my playlist and find songs that are duplicates of each other.
-
Signed in and someone elses welcome - not me by name! Pls help!
OK, so I registered communities of Apple Support, signin accepted but he kept saying welcome and Login name instead of OhThatGirl welcome and logout. Not once, he said, wrong name or password... just I would like to connect but never really show my
-
Additional package for Satellite A100-003
I have a Satellite A100-003 and I just installed vista 64-bit, which is the correct for toshiba value added package, because I get an error at the end of the installation. Thank you
-
Can I share an existing album without creating a new album?
I have about 50 existing albums in different folders in the Photos. These are all uploaded to iCloud. What I would do is: share all these albums (not to create a new album, but just to share existing ones) allow other users to contribute to the album
-
HP P1102w printer wakes up not after sleep (wireless configuration, win8)
Bought this printer about a month ago. I have no problem with two LAN + Wireless Configuration. Windows8 OS I noticed once the printer is not on (go to sleep), he wakes up not by himself. According to the manual, if I send a print job, he should wak