HP P1102w printer wakes up not after sleep (wireless configuration, win8)

Similar Questions

• Fingerprint reader not working not not after sleep

  So, I've mentioned this problem in a previous post and was directed here http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67245 which is a patch that could solve this. This patch did not work. What happens when my laptop back to sleep or the fingerprint reader does not, it says "waiting...". "the top of the screen instead of the normal scan message and don't answer not, or in some cases when I click on other identifying information, it shows a third account (first is my account, second is the account of the player, and the third is a thing stop sign that says that the fingerprint reader is not attached). When I connect with my normal password and try to go to the fingerprint software, it appears a bit is window that is labeled Digital Footprints Lenovo 2.0 and the message "Please wait...". ».

  Other then returning to sleep the fingerprint reader has been working well. Any suggestions are greatly appreciated, thank you.

  Edited to add link patch.

  Well, I was still functioning, but I'm not exactly sure how. I'm going on what I've been through so that you guys can get an idea and fix if necessary. To start I spoke to Ms support and I worked with them for a very long period. They tried different drivers installation (other AuthenTec then) and every time we did it he would say "Fingerprint reader is not available" at the opening of the session. They have tried to change the power settings and devices that could wake up from my computer and that had no effect either. I called Lenovo and they basically just told me to download the software that was already on the computer and change the option to have it wake up the computer, which does not exist. They were very helpful.

  What eventualy get it working (and it's been working so far), is to uninstall the driver and software. Then reinstall everything and install the patch link above. The first time I install it, I just double clicked on it and went through the installation process. But you must go to the folder, he settled in (C:\DRIVERS\VISTA\FPIRPON\) and double click on FPIRPOn.reg which will add the fix in the registry. In addition to this I also went into the Device Manager and unchecked the box that allows the computer turn on of the fingerprint reader under properties-> the power management of the device. The last thing I did was make an edition of registry to force reset USB every time that wake from sleep. I found the registry change here http://support.microsoft.com/kb/928631/en-us.

  So I'm sure it's the patch that fixed when I installed correctly it because I tried both the thing of power management to prevent of turns off AND editing the registry and it did not work. I also thing that Vista SP1 solves what the registry edit did, but I tried anyway because I was desperate haha. I'll cancel the registry change and thing of management one of power at a time and see if it still works. If it does not continue to work I guess it's a hardware problem and want to call Lenovo to get it repaired.

  Anyone who has this problem I would say that they are trying the patch in the link I posted (http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67245) and follow the installation instructions carefully. Good luck!

• HP Photosmart C5280 All in One printer works is not after the installation of updates

  OP: Problems with my HP Pavilion connect with my HP Photosmart C5280 All in one. Allows to work properly and after running the update something happened.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello iwasbetterbutgotoverit,

  1. do you have an update of the hardware installed on your computer?

  2. what exactly happens when you try to print from the printer?

  I suggest that you try the methods below to solve the problem.

  Method 1:

  I suggest that you run the printer troubleshooter. This automatically diagnose and fix printing problems, installation of a printer, connecting to a network printer and other related errors:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2:

  As it was working fine before installing the update, I suggest that you do a system restore on your computer.
  To restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (c) in the System Restore dialog box, click on choose a different restore point and then click Next.

  d. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  e. click Finish.

  You can visit the link to the KB Article for reference:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  You can use the System Restore tool to undo the system restore if it does not help.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Internet and the printer works do not after windows update

  Windows xp, mcafee internet security

  Recently, I ran a windows update and leave my computer turned off.  When you turn it on, the were (are) of the internet and the printer does not.  I went into Device Manager via Control Panel to see if I could turn them on and there is nothing pulling up in the Device Manager.  All documents and are accessible, but I can't even start a new internet connection and cannot print.   I am currently using another computer (more modern) in another room.  I even tried the SafeMode (f8 in the middle) from the model and go to Device Manager and nothing was there.  I just tried to go through the f8 option and beginning to a previous state that worked and I have the same result...  Everything is saved on that on a 350g portable hard drive.  It would just be easier to wipe the hard drive and start over? If so how would I do this reformatting?  Thanks for any advice.

  Michael

  Hello MikeKloss,

  Before you destroy by formatting the hard drive on your computer, I suggest that you do a restore of the system on the computer by choosing a restore point when it was working fine. You can check the link that will give you information about how to restore the system on the computer below:

  http://support.Microsoft.com/kb/306084

• HP LaserJet M127fn MFP pro: printer works is not after a few days

  Hello I have a printer model: HP LaserJet MFP M127fn pro

  I installed the software and drivers and the printer works perfectly well for a few days and then stops working. I have then uninstall and reinstall the drivers working yet and only a few more days...

  Someone please guide what to do...

  Thank you

  Hi!, guy36:

  Please see... http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Introduction

  Step 1

  Step 2

  Step 3

• OfficeJet Pro 8500 a: printer no longer works after reset wireless network

  OfficeJet Pro 8500 has, MacBook Pro, running the Mavericks.

  For 3 days, when we added a password and blocked our router wireless (modem ATT UVerse), our printer is "offline" print jobs queued, but do not print.  When I go and check it says "printer offline".  Or in the print queue, it is something like "looking for printer."

  He worked briefly when we found a power cord and plugged into the laptop, but will not work wireless, which he did before.    No changes except to repeat password for the network.

  I have the manual and you have turned off everything, then return in the order recommended (router, printer, then laptop).  Always offline.   Can someone please?   Thank you!

  Hello @LindaGrace,

  Welcome to the Forums of HP Support!

  I understand that since to add a password to your wireless router your HP Officejet Pro 8500 has e-All-in-One Printer not communicate wirelessly with your computer Mac OS X 10.9. I would like to help you today with this problem of wireless communication.

  Now, make a change to your network, as an addition to a password or change a password, translates into having to reconfigure your printer on the wireless network. At this point your printer is to be 'blocked' access to your network wireless because of the change you made. To correct this problem, you simply raise the Setup wireless for your printer to "say" the printer network name and password. Once the wireless installation runs successfully all will continue to work for you according to the normal.

  To run the Wireless Setup Wizard on your printer, please follow the steps below.

  1. On the touch screen of the printer, press the right arrow key () to display the second navigation screen.
  2. Press network () to open the network Menu.
  3. Touch Wireless.
  4. Press the Wireless Setup Wizard, and then press continue.
  5. Please wait while the printer is looking for the routers that are nearby. Appears in the menu Select Network (SSID) .
  6. Scroll the list of network names until you find the name of your network.
  7. Tap the name of your network.
  8. If you are prompted, enter the WEP or WPA key. This is the password for your wireless network. The password is case-sensitive.
  9. Wait for the printer to connect to the network

  -Source

  Once your printer is connected to your network again, please try to print. If printing still fails, you need to add the printer to your Mac because of the connection of network new printers. Please follow the steps below to add the printer to the Mac.

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scanand then check if the name of your printer appears in the printer list.

  3. If your printer is already listed, remove and re-add the printer to check the communication with the Mac. Click on the name of your printer, click the minus sign (), and then delete the printer

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer

  5. click Add to add the printer to the list.

  Now that the printer is properly configured on your network and added to the Mac, please try again to print wireless.

  Please reply to this message with the result of your troubleshooting. Good luck!

• OBIEE 11.1.1.7.0 works is not after you have configured to use authentication MSAD (Active Directory)

  Hi all

  I'm trying to configure OBIEE 11 g to use the MSAD (Active Directory) authentication. I followed the instructions of Configuration Oracle BI with Oracle Internet Directory , but after a restart all services, I do not get connect OBIEE. I've hearded that there is a bug in this version (11.1.1.7.0) when you rearrange the suppliers and put the new (that you created) as the frist, followed by DefaultAuthenticator and DefaultIdentityAsserter providers.

  Someone had this problem? How to resolve that? Is there a URL or DocID teach how this is set correctly?

  Thanks in advance,

  Concerning

  is even if you have 10 k + users it will show only 1000, this is the limitation, but you can still find the users from the top by clicking on customize the table, it options you give the criteria in filter and view display, you can select the column by which you can search for example: by using the name or description, or Provider(AD or Default) in this path , you can search for specific users you want to see or Alvaro * so it will give u the list whose name start with Alvaro

  I hope it helps brand if not

• Windows Mobile 8 turns is not on after sleep.

  I have a Haier laptop with windows 8 is installed. Few days back my laptop got problem with mode 'sleep', it might be light not after sleep and I had to stop it to turn it on. This time after sleep, I tried to turn it on, but it has been set for the auto repair, after some time it says "Your PC couldn't be repaired" with options like system restore, refresh, reset, guest... Whenever I turn on the same process repeats... Now what should I do? Any suggestions?

  Since your laptop now Windows 8 OS, you will have an error "the inserted media is not valid" when inserting it with Windows 8.1. To get this fix you are trying to insert the media Windows with Windows 8 OSrecovery or installation. Then, try to update your PC or reset your PC. Otherwise, you must reinstall Windows 8.1 with your media recovery instead of use the refresh or Reset.

  Kind regards

• with 10.11.2, Mac Pro 2013 wakes up not 4 k shows up after sleep as before.

  I installed 10.11.2 today and found that the Mac Pro wakes up not 4 screens connected to the thunderbolt ports k. I tried many kinds of 4 k screens, including u28e590d, u24e590d, p2716q etc., but none of them is waking up after sleep. the only resolution is to disconnect and reconnect the thunderbolt (view port) cable a thunderbolt different port.

  these screens all work perfectly with 10.11 and 10.11.1.

  Steps to reproduce:

  1: having a Mac Pro 2013, configurations and install 10.11.2

  2: Connect a screen 4 k as u28e590d to the thunderbolt port, using mini-displayport cable.

  3: let the Mac Pro sleep

  4: when press a key or click the mouse, the Mac Pro will wake up but the screen won't wake up 4 k.

  everyone knows the same problem?

  Hello.

  same problems here :-(

  MacPro 2013 with the D300

  4 k screens: 28e590d Samsung and Asus PA328Q.

  Can someone help? This problem is very annoying!

  Andi, of the Germany.

• Vista home PR., after that "sleep" mode, the computer wakes up not (dell inspiron 530)

  Dell inspiron 530 vista PR. House, after the "sleep mode" the computer doesn't wake up. The mouse works fine. (the computer is set to wake you up at a mouse click)  When I click the mouse fan goes up like to spend awake mode, but fan and the power light continues to blink.  I press the power button once and stop the computer, then the computer says recovery and gets stuck again. Then I turn it off again and it completely restarts and the power led will stop blinking and I'm back in business. -arg... Help! Thank you.

  Hello

  You did changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps mentioned in the links below.

  The problems of wake the computer from sleep mode

  http://support.Microsoft.com/kb/266283

  A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode

  http://support.Microsoft.com/kb/930091

  Method 2:

  Refer to the section "Why doesn't my computer go to standby or hibernate as expected, or why he wake up suddenly?" the link mentioned below.

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

• My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you

  My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you

  Hi 464544,

  Welcome to the Forums of HP Support! I understand once that your HP Photosmart 6520 starts in mode "sleep" you cannot send a print job, it does not automatically standby upward.

  Please take a look here:

  The printer into standby mode after five minutes of inactivity to help reduce energy consumption. The sleep time can be changed from the control panel. The printer will wake up mode 'sleep' to print when a print job is sent to it.

  However, the auto power off feature must be disabled. Auto Power-Off turns off the printer completely, you must use the power button to turn the printer back on. You can change the setting Auto Power-Off from the control panel. configuration -Source

  Menu Configuration > other Menus > Eco > auto shut-off > off

  I hope this helps.

• 10.6.8 PowerMac G5 Mac wake after sleep

  10.6.8 PowerMac G5 Mac wake after sleep

  You either do not have a PowerMac G5 if it executes 10.6.8 or your PowerMac G5 does not run 10.6.8. The PowerMac G5 is not able to run Snow Leopard 10.6.8. It is only capable of running OS X Leopard 10.5.8.

  Please correct your information so it was can help you.

• wired keyboard and mouse not recognized after sleep

  TL; DR after waking from sleep, the wired Mac keyboard and mouse are unresponsive.

  I have a new Mac Mini.

  OS X El Capitan 10.11.2, 16 gb Core i7.

  I had a keyboard and a compatible bluetooth mouse, but I had the problem that after the Mini for sleep, the keyboard and the mouse were not detected.

  I bought an Apple mouse wired and wired keyboard.

  I have the same problem.  If I SLEEP the Mini, when I wake up it (short press on power) or the keyboard or the mouse are recognized.  It's like I have no connected.  If I disconnect it from the usb and the re - attach they are not always recognized.  I have to press power to force power off and restart and then my keyboard and mouse are recognized.

  Sometimes when pressing the power button to wake up from her sleep, I also get a "flickering" image monitor, which improves if I turn on and off to sleep a few times, or restart.

  It is very annoying, any ideas?

  Try turning off blue tooth - it seems to me the pop up screen searching for the mouse Bluetooth turn on the lock.

• Mouse and keyboard does not work after sleeping on a laptop

  After awakening from a sleep of my laptop, my keyboard and mouse went crazy, pushing buttons at random on the screen, beep and completely freeze then both. I restarted my computer and got to the login screen which I was able to type in, then he connected and the keyboard and mouse do not work. I plugged in a USB mouse and the mouse that works very well. After some playing around, I got the keyboard works by accessing the control panel and change the speed at which the keys type and for some reason, this fixes the keyboard. However, I am still unable to get the mouse works.

  So three questions, 1 - what happened in the first place? 2 - why my keyboard was working to connect, but not once it really connected? 3. How can I get my mouse back?
  Thank you!

  Hi NicoleWood,

  You can read the folloaing articles and see if it helps.

  The problems of wake the computer from sleep mode

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  Hope this information is useful.

• EliteBook 8740w wake after sleep

  Hi all

  I bought laptop HP EliteBook 8740w

  I have several problems...

  Thus,.

  Configuration:

  (i5-520M, 4 GB, 320 HARD drive ATI 7820 M)

  OS - preinstalled Windows 7 Prof 64 bit

  All windows updates and the latest drivers for the chipset, video and so forth have been installed.

  1. computer laptop doesn't wake up after the mode 'sleep', i.e. all coolers start working really hard and LEDs are burning bright, but leaves black screen (5, 10, and several minutes, but no progress)

  I assumed problem with the BIOS, I have BIOS F.03 28.04.2010 but worm real version is F.09

  I went to the HP support and downloaded the latest site.

  But I can't update BIOS!

  If I use HPQFlash.exe program, he said: "after the operating system restarts, BIOS will be updated", but after restarting the BIOS operating system has old version

  If I use the options - key USB system after formatting and copying files (I checked the files on the flush), but when I try to load OS from hard Ras (after restart of ESC, F9), I see error - this disc is not system drive has chosen another, or something like that

  I tried at least trees different readers RAS, and always had the same result.

  I even downloaded bios f.08 version, but the same situation too.

  So, I try to summarize the problems

  1. computer laptop is not wake up after fashion 'sleep'

  2. it is not able to update BIOS

  3. What's wrong with loading PC from a USB...

  Is any body could help me... pleeeeeeze

  To solve the problem with the sleep mode, need update Intel management engine complete

  I've downloaded firmware from here http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4138087&prodNameId=4137878&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-85374-1

  waking up after sleep works now!

  BTW

  about boot from USB, I tested the USB hard disk - it worked properly...

  but the boot of steel hunting impossible...

  and the BIOS is not updated either...