try to burn CDs

Similar Questions

• 8FFD020E and C00D11AB when you try to burn CDs

  original title: 8FFD020E and C00D11AB

  This error prevents appear when you try to burn CDs. Have tried all of the suggestions. This is a very common errror, a lot of people on the Internet asking about it!  I managed to burn a couple of week last CD, after the publication of this error. Now, does not burn yet. This should be fixed! What is the solution?

  Hello

  Method 1:
  You can run the fix - it from the following link.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems
  Method 2:
  You can read the following article.
  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP
  http://support.Microsoft.com/kb/324129
  See also:
  How to copy information to a CD in Windows XP
  http://support.Microsoft.com/kb/306524
  How to troubleshoot Audio CD creation in Windows Media for Windows XP player
  http://support.Microsoft.com/kb/306319

• I get this error message when I try to burn CDs and I was burning CD frequently over the past 3 months. Please help me

  Windows Media Player encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged.

  the disks are clean, Ive tried over 10 different drafts and still the same error.

  Hello

  1 are there any changes or updates made on the computer?

  Method 1:
  You can open the CD / DVD, reading and burning convenience store.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  Method 2:
  You can take one or more of the following, and then try again:
  a. Verify that the CD burner is properly connected.
  b. clean the disc and verify that it is not damaged.
  c. try a different brand of blank discs.
  d. If another program is currently burning files on the CD, wait until the burning process is completed.
  e. Quit other programs that may be using the CD burner.
  f. restart Windows Media Player.
  g. restart your computer.
  h. Select a recording speed (write) more slow for the CD burner. See below the help link
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  You can also visit these links for support and verification-
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

• Error code when you try to burn CDs: C00D10DA

  0x8002801c

  I tried to burn a CD as usual and received the error C00D10DA. I tried the fixes with lowering the burn speed and did not work. I also tried to RUN "regsrv32wmp.dll" and got a different error message "DllRegisterServer failed: Error Code 0x8002801c.  Help, please. This never happened, and I use the same CD as before with no problems.

  Thank you.

  Hi SPANKIJ,

  ·          Do you have any other software installed on the computer for CD burning?

  ·          What version of Windows media player installed on the computer?

  ·          Did you the latest changes on the computer?

  (a) clean the disk, make sure that it is not corrupted, and then try again.

  (b) use a different brand of blank discs.

  (c) close other open programs, and then try again.

  If fails it above step then see them below Microsoft article and run the fixit tool available, check if it works.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP

  http://support.Microsoft.com/kb/324129

• Impossible to burn CDs of data using Windows

  I can't burn a CD of data using Windows, even if I did in the past. I am still able to burn CDs of music via iTunes and the reader has no problem playing discs; However, when I try to view folder to a blank disc or attempt to add files, the computer does not respond. It shows the circle of rotation for a while and then does nothing. I tried updating the driver, but that did nothing.

  Since I am still able to burn a music CD in iTunes, I guess it must be a software problem rather than a problem with the hardware of the player.

  My laptop is a gateway, model MT6919 and I am running Vista Home Premium

  Any help is greatly appreciated

  
  

  Hi new,

  1. you receive an error message?
  2. did you of recent changes on the computer?

  Method 1

  Uninstall any third-party DVD burning software installed on the computer and try to burn CDs.

  Method 2

  It is possible that some third-party programs installed on the computer are in conflict with the burning process.
  I suggest that you try to clean boot and check if it works.
  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on Start, type msconfig in the search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. on the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows media player error "Windows Media Player has encountered a problem when you try to read the file" after burning CDs.

  Original title: "missing songs" in my windows media player then burn them on several cd :((

  I burned songs to several cd using my Windows media player to make different Cd, but after I returned to my library all the songs that I burned to the CD have disappeared, they are there, but they won't play it is as if they have been deleted, a window appears saying that windows media player has encountered a problem when you try to play the file. I did not notice this until after Cd burning a few I can't do more because if I keep going I'm not going to have more songs in my library! I don't know what to do im going crazy, it took me a long time to get all of these songs and now he disappeared! I have Windows 7 Ultimate is the version 12.0.7601.17514 hope that helps

  Hello
   
   
  They were playing before you burn CDs?
   
   
  Method 1:
  
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
  Open the troubleshooter in the Windows Media Player library:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  
  Method 2:
  
  This problem may be due to database corruption. You can delete the Windows Media Player database and check if the problem persists.

  Steps to clear the database of windows media player:

  a. exit Windows Media Player.
  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.

  Note you don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.

  b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.

  c. Select the Media Player folder, and then click on Delete on the file menu.

  d. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

• Qosmio G30: CD/DVD drive does not burn CDs or DVDs

  Hi all...

  I use a laptop G30 and the moment where that I bought I couldn't burn CDs or DVDs in the drive using the!
  Whenever I have inserted a blank CD/DVD into the drive, it can not be read and an error message is displayed (E: / is not accessible incorrect function) when I try to click on the CD/DVD ROM.

  If anyone has an idea on what to do, please share it.

  Thank you

  Hello

  Check it please drive under recording tab properties and enable CD recording this option of drive. After doing this he test again.

• Satellite A210-16F cannot burn CDs or DVDs...

  Hi, I bought a Satellite A210-16f. I did the downgrade to XP Professional... Everything works fine, but I burn cds, dvdcs, audiocds can´t...
  I don't know if its problem of HW or SW problem... In Vista home I didn't try to burn a CD, because I reinstalled it XP.

  I use Nero 8, but after 3% of burn it show me error and Burning process failed
  Nero 7 shows me the same.

  I tried Toshiba disc creator and this SW shows me this:

  The ocured of following error to save data
  Stops the current process
  Error occurred during the registration phase...

  etc...

  Can U help me?

  Thanx

  Well, either it's a question madia or CD/DVD drive problem.
  Check another CD and DVD from different manufacturers.
  If the same thing happens to what different types of media, then it s a STRANGE HW issue.

• Satellite A20-S103: can't burn CDs

  I use satellite A20-S103.
  my laptop won't burn CD more!
  This laptop uses a combo CDRw-DVD-ROM
  It reads, but he's not burn CDs?
  I looked in the tools and utilities cdrom. I saw a driver called DVDRAM. also I searched toshiba.com drivers latest. She also wrote driver DVDRAM here.

  What is the true driver?
  What can I do to fix this?

  Hello

  As far as I know, DVD player is automatically recognized by the operating system and you n t need to install any driver. Driver DVD-RAM is something else and it is not only the driver but the little tool too and must be installed if the unit has DVD - RAM drive.

  If you can't burn CD the only thing you can do is to do some tests.
  Try to remove the drive from Device Manager, and then restart the device. The reader will be recognized and installed automatically
  Check if you have any success with the media from different manufacturers
  Try to clean the lens

  If this does not help, I guess that your drive should be replaced.

  Good luck!

• I can not burn CD when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive.

  Original title: I can not burn CD

  I can down load soft ware, playing CDs; s & DVD, but when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive. How to fix this?

  Hello

  1. have you tried using different CD and check?
  2. were you able to burn CDs without any problem earlier?
  3. have you made changes on the computer before this problem?

  The hotfix in the following article might help you.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

• What burning CDs in Windows Media music system prepares all the files listed.

  What burning CDs in Windows Media music system prepares all the files listed.  When the system starts writing the files on the disc it gets through about 4 songs and then goes to finalize the disc and ejects the disc.  The disk does not appear to have anything on it.  Can I do anything locally to solve the problem?

  My system is XP.

  I burned the disc a lot in the past

  There has been no major changes to the system

  The files I am to burn to the disc are previously ripped files on the disk hard, some of them were burned on another drive before.

  I tried to slow down the burn speed, but that did not work.

  CD burning problem

  Hello

  • You receive an error message when burning CDs?
  • What were the changes made before the issue started?
  To resolve this problem, do one or more of the following and then try again:

  a. Verify that the CD burner is properly connected.

  b. clean the disc and verify that it is not damaged.

  c. try a different brand of blank discs.

  d. If another program is currently burning files on the CD, wait until the burning process is completed.

  e. Quit other programs that may be using the CD burner.

  f. restart Windows Media Player.

  g. restart your computer.

  h. use the Windows error-checking tool to find system errors of files with bad sectors on your hard drive. For more information about the error-checking tool, see Windows Help and Support.

  You can check: http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=11.0.5721.5145&id=C00D10DA&contextid=30&originalid=C00D0019

• Error message: burner or software not found when burning CDs using iTunes.

  Original title: help please!

  I'm tring to burn a cd from itunes and it says not found burner or sofeware. What should I do about it?

  Hi Dawnso,

  1. what happens when you try to burn a CD using iTunes?

  2. you receive messages or error codes?

  You can see the article next to the Apple support and check if it helps.

  iTunes for Windows: additional troubleshooting questions burning tips

  Can't burn a CD in iTunes for Windows

  You can also chack if you are able to burn CDs with Windows Media Player.

  For more information, you can read the following article.

  Burn your own custom CDs

  If you still need help, you could get in contact with Apple support.

  Apple support

  Hope this information is useful.

• I used to be able to do with discs DVD-R data discs, now iv changed my hard drive and my computer only recognizes CD - R when I try to burn data?

  "Please insert the disk" error message when I try to burn data to DVD-R disc but works fine when burning data on CD - R.  Also, he can't read and data DVD - R disks, I made from the same computer in the past with the old hard drive, is my new hard drive, missing some sort of driver or something?  Windows XP computer bought from Dell about 4-5 years (Dell 5150).  He let me play commercial CD, burn CDs and burn data on CD - r.  He no longer do anything with a DVD-R disc, wont even recognize one, please help

  Hi malikchebli,

  See the below Microsoft article and try the steps mentioned, check if it helps.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

• Error message when you try to burn a cd of Media Player 11.

  I had a computer crash, last winter and had to have the hard drive on my computer wiped and rebuilt.  I have w/service pack 3 for Windows xp.  My media player has been updated to 11.  I restored my music from my backup disks and imported into my windows media player 11 library. .  I tried to burn a cd of songs in my library, 11.  All the songs have been downloaded from Cd, I have owned or purchased from a line originally store.  I was the first to send a message to digital media rights, then I got a message that they could not determine the length of the song and suggested playing them, then transfer to a burn list.  I did this and still get the message on the length and the DRM rights.  I had no problem with it before the crash, I was able to burn CDs with ease.  When I'm viewing my library all the listed music has song lengths, so this message confuses me.   What can be done to fix this?

  Make sure that you logged in as an administrator and use Internet Explorer to go to http://drmlicense.one.microsoft.com/Indivsite/nl/indivit.asp for the upgrade of security.

  If this does not work either, create a new user account in Control Panel, log on to this account and try to perform the security upgrade it.

  Tim Baets
  http://www.BM-productions.TK

• cannot burn CDs when I drag my music to burn list, wich Player do I use

  I write and play my own music and can not burn my playlist when I drag from the air to burn the list, can I use e-reader? I've tried both

  Hello

  1. what burning software do you use?

  2. do you get an error message?

  If you do not use Windows media player, and then follow the steps in this link to burn CD and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  If you are not able to burn CDs of any burning software, then try to run this fixit and see if it helps:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  It will be useful.