try to reinstall cs4 on my old G5.  does not recognize the previous version when I select in the menu drop down and put in the n serial

Similar Questions

• CS4 install a new computer does not accept the included serial number Acrobat Pro

  I bought CS4 Design Standard through my University.  I used it for years, and I'm pretty happy with it, I don't want to pay for a newer version.

  Recently, I bought a new computer and went to reinstall it on the new computer.

  The installation went without problems

  Recovery of my series of Adobe has been frank.

  Amnesty International, PS and ID agreed the serial number without problem.

  Acrobat Pro says that serial number is invalid.

  I spent two hours on the cat and in the end he said that the relief phase was not available for CS4, but was only available via online forums.

  So I initially posted the Acrobat Forum 3 days ago, and while my post has dozens of viewers it has none.

  How do I get this resolved?

  I don't think charitable thoughts on Adobe right now.

  http://forums.Adobe.com/message/6054756#6054756

  System,

  I finally (after 5 attempts) through the swamp on the other side.

  Here's what I did...

  1 uninstalled all of the CS4 program.

  2. manually deleted the folder under Program Files Adobe

  3. Ran the CleanCS4 program, who told me that I had to run microsoft windows install clean up utility

  4. has opened a new Director on my office profile

  5 install CS4 here

  6 open photoshop

  7 open acrobat.

  (I think that's everything now works).

  g'luck!

• ?? I've updated 6.0 to the latest version (6.3), which should make it compatible for RAF Fugifilm XT-10.  However, when I try to import these files into Lightroom, it does not recognize the file.  Does anyone else have this problem?

  I bought the XT-10 Fugifilm.  On the Adobe website, it indicates that Lightroom 6.1 and above is compatible with the file format of RAF.  However, even after the update, LR won't recognize the files when I try to import them.

  If someone has experienced this problem and found a solution?

  [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]

  The current version is 6.6.1

  What's new in Lightroom CC 2015.6.1 and Lightroom 6.6.1? Lightroom Queen

  Try to update to 6.6.1 and see if you still have the same problem.

• You try to upload my Web site, but it does not recognize the FTP server, have I missed a step

  I am trying to download my website of the "Upload to the FTP host' in the Menu files.

  I enter the domain name, user name and my password for my host.  It says FTP server not found.

  If I change the FTP server to the IP address, my ISP gave me that I can go a little further, but I get the following message.

  "Unable to validate the specified domain that is associated with the FTP server and folder.  Go ahead in any case or not. »

  If I hit Yes it downloads the file to my Web host, but it will not publish the Web site

  I missed a step somewhere along the way to get it going.

  Thank you

  Angela

  Hello Hollyford,

  Please see the following link, they might be useful.

  http://helpx.Adobe.com/Muse/using/uploading-site-third-party-hosting.html

  For video

  http://TV.Adobe.com/watch/learn-Adobe-Muse-CC/using-FTP-with-Muse/

  Kind regards

  Nitin Kapila

• I have Digital Editions installed but when I try to download a book in my corner, it does not recognize the format of the CMHA

  I had to cancel and re - authorize my meal.  I removed my old version of Digital Editions and later installed.  I can open Digital Editions and see my latest library books, but I can't download new.  It does not recognize the format of the CMHA.  I tried to add in the file type, but it is not on the list. I checked my registry and Digital Editions is here.  I don't know what else to do here.  I'm running on Windows XP with a corner of torches and restarted my PC.  This used to work fine for me and now I can't use it at all!  Please help me!

  Thank you

  I tried both.  Actually, what I did to resolve this was to ADE 3 version to uninstall and reinstall version 2.  Not sure if it was uninstall and reinstall or version, but it works now.  Thanks for your respone!

• I have a problem loading Illustrator CS4 on a second computer (laptop). It does not recognize the number, saying: it is not valid. [was: ochre]

  I have a problem loading Illustrator CS4 on a second computer (laptop). It does not recognize the number, saying: it is not valid. Any suggestions on how to have the serial number recognized would be appreciated.

  Please see: error of incorrect serial number

  I hope this helps.

  Concerning

  Megha Rawat

• Currently, I have Photoshop CS5 with Adobe Bridge. The upgrade online for Photoshop CS6 includes upgrades to the bridge? I recently bought a camera Nikpn D810. The old version of the bridge does not recognize the D810 Camera Raw format. Thanks for any hel

  Currently, I have Photoshop CS5 with Adobe Bridge. The upgrade online for Photoshop CS6 includes upgrades to the bridge? I recently bought a camera Nikpn D810. The old version of the bridge does not recognize the D810 Camera Raw format. Thanks for any help.

  New digital camera sometimes means an upgrade of the software, as in this case.

  Camera Raw plugin | Supported devices

  Applications of camera Raw compatible Adobe

  First, the D810 is supported in camera Raw which is compatible with the CS6 and later versions 8.6.

  Options:

  1. Pay for upgrade to CS6
  2. Join the cloud to Adobe
  3. Download the free Adobe DNG converter, convert all the D810 Raw files to DNG, and then edit the DNG in CS5 helps Photoshop | Digital Negative (DNG)

• Why the CC lightroom does not recognize my users folder when you try to import?  I can not imaport images in the program.  It has worked well in the past

  Why the CC lightroom does not recognize my users folder when you try to import?  I can not imaport images in the program.  It has worked well in the past

  It is an Apple problem. They obviously fixed with a change to iTunes. Download the update on their part.

  HAL

• My computer won't let me not reinstall windows because he thinks that it is 32-bit and does not recognize the installation discs. Help please?

  My computer has not worked since I stopped him during an automatic update. Which I have been kicking myself since then, but the last time that he updated, he beat the computer and I panicked.

  Anyway, it won't run certain programs, including iTunes and a large part of MS Office, and no matter how many times I try to reinstall, they still do not work, saying: "side by side configuration is incorrect."

  What I want is to restore it to factory settings - all my data is secured and sustained upward. But when I put in my recovery disks (and they are the highest boot priority in the BIOS) the system takes care of the hard drive as usual. When I remove the ability to boot from the hard drive, my system no reserves at all, telling me to restart or insert a suitable disc. And when I boot from the disk and try to run it manually, by clicking ETFSBOOT, it tells me that "the version of this file is not this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program. »

  I have double and triple checked this - my system is 64-bit. My records are 64-bit. As far as I know, the computer got garbled during the automatic update and now part of it think it's 32-bit (some programs are divided into sections 32-bit and 64-bit). All I want to do is to reinstall windows, but I don't know what to do because it does not recognize my discs! Any suggestions, internet?

  Thank you very much.

  In addition, if it is relevant, I'm Windows Vista on an ASUS K50IJ laptop. I do not have the windows install disc because the computer was shipped with windows installed, but I have the recovery disc ASUS (which have been used to restore my computer in the past).

  Hello

  Since you are unable to open programs like iTunes or Office, you can try to perform the system restore and check if it helps.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  About the factory restore the question, you need to contact ASUS support for additional help on ASUS recovery disks.

  ASUS support

• CS6 Bridge does not recognize the videos but CS4 only

  Hi forum,

  My copy of Bridge CS6 suddenly stopped showing a preview for video files image and does not play the two.  Lightroom 4.4 and Lightroom 5 also do not recognize the video files (in .mov, of .avi, clamps to m...).  My Lightroom used to have no problem playing them.

  Bridge CS4 can see and play as usual.

  I'm running OSX 10.8.5 have purged my cache in Lightroom, uninstalled and reinstalled video, updated Quicktime.

  You need to reset the preferences.  Hold down the option key and launch Bridge.  You will get a window to reset.

• Dreamweaver CS4: change/rename a .flv - does not change the script code

  Hi all

  
  I do some changes to a site that does everything at the time using CS3.  The site has many, many pages that have embedded .flv files.  All these files have been updated with new videos, so now that I have to go back and change the links for them all.  I'm used to be able to click on the placeholder of the flash on the page and then edit the file link in the Properties window.  Now, it seems that in CS4 when you change the name of the file in this window it only changes the file name in the section object of noscript code but it does not change in the AC_FL_RunContent in the code section.  Me missing something, there was a preference setting in DW I missed somewhere that would make two references to a multimedia file will change when it changes in the Properties window?

  Thank you
  Chris

  Hello

  CS4 uses different code to insert flv as CS3, which is probably why it does not recognize and replace the old code.

  This means that you probably need to re - insert the FLV into your pages using the insert in CS4 for this option Update automatically on rename.

  PZ

• Want to reinstall XP but the computer does not recognize the cd drive and does not allow for any installation.

  Accidentally deleted some system files and now the computer won't allow me to install anything. Tried to install a new cd player to replace a corrupt, but it does not recognize drive. All the driver and OS install CD. Help.

  Fix missing files:

  Try to run the checker system (CFS) files.  Press start, select run, type: SFC/scannow

  SFC will ask your installation disc (which you must have if you are going to re - install), put it in the drive when requested.  Leave the SFC to replace all missing or corrupt files.

  To resolve the startup problem:

  Check your BIOS Setup and make sure the optical drive is enabled and listed before the hard drive in the boot order.  When you start, there will be a message, "type any key to boot from the CD-ROM."  Type any key (execpt shift, shift caps lock, NumLock, etc) will cause the CD to be initialized in the installation program.  (I use the space bar, it's an easy target.)

  In addition, it would be useful to know a few more things: 1) what edition and service pack level of Windows XP you are running?  (2) what is the model and manufacturer of the optical drive, please?

• password has expired, but can not use the old password to change, does not recognize the old password

  I have to change the password, but does not recognize my old password which is required to apply the change to a new password to access my account

  Simply log in using the built-in Administrator account (it cannot be deleted) using start > run > "control userpasswords2" to reset the password of the account desired.

• ITunes does not recognize the songs and the old shuffle stop at 30 seconds

  I have an old shuffle, 1 MB, maybe a 2nd gen, gold (A1204 EMC). iTunes (iOS 10.11.4 12.4.1) has problems with the shuffle. He quickly recognizes the shuffle, which appears as a mounted device and on the desktop a moment, then it reports that there are no. The shuffle disappears from the desktop and I get a warning saying that it has been deleted without eject.

  ITunes then freezes and I have to force quit.

  I can charge the shuffle, but when I go to listen to the songs, they last 30 seconds or less, the following starts then and in about 30 seconds, it will stop followed by another song.

  I tried to reset (turn on, turn off for 5 seconds and turn on) several times but nothing changes. I tried to erase using disk utility (15.0). The shuffle will not disassemble process works.

  All of the suggestions. My 2009 iPod Touch works better than this most recent shuffle. I like to use the shuffle when you do yard work.

  Same thing happens when I try to sync the shuffle using a snow leopard starts.

• Why my data Ext Hard Drive WORD & EXCEL from my old computer does not recognize my new computer with Windows 7.

  Recently, I replaced an old computer running Windows XP with a newer computer of Windows7.

  I have TWO Toshiba external hard drives 2... one of them (Mdl HDDR250E03X) is used for external backup of data on my computer.  I started using it for my old computer that was running on Windows XP.  Due to a Trojan infection, I had to buy a new computer running Windows 7.  I thought that the hard drive is simply a plug-and-play device, BUT my new computer has not recognized that there is a device plugged until someone suggested that I make a change in the Device Management section (which only works at Midway).  My new computer now sees that the drive is there, BUT the data displayed under a name of file/folder (dec22a69bbd43e6966c9935e4720f7).  Data include WORD files, EXCEL files and .jpg files.  When I click on this long file/folder name, I get a long list of records as well as other unknown files that I don't recognize.  Inside each of the files is the SAME set of files (EULA, LocalizedData and SetupResources.dll.  When I try to save a WORD or EXCEL file on this disk, I tells me that the drive is empty, then the path and destination does not allow me to record anything.  I suspect that the problem lies in the Windows 7 software to recognize the hard drive but, I'm totally new to this Windows 7.  Everyone recognizes what is the problem?   I KNOW that the data is always there because I ran my virus on this single drive software and I could see many file names as they were read.

  Hello DuaneMeyer,

  What are you help save external hard disk?
  It is built in the backup part OS backup software or a 3rd?

  Please let us know.

  Marilyn