Trying to connect a new PC without wire.

Similar Questions

• I'm trying to connect a new Iphone to itunes to phone, he told me an I need a newer version of itunes... I later?

  I'm trying to connect a new Iphone to itunes to phone, he told me an I need a newer version of itunes... I later?

  What version of iTunes and Windows you have?  An iPhone IS requires at least iTunes 12.3, which in turn requires at least Windows 7.  Refer to turingtest2 for Windows guide excellent iTunes:

  Troubleshooting problems with iTunes for Windows updates

  See the iTunes installers section.

• I'm trying to connect my new tablet from lenovo to WI - FI. I don't remember my password, how can I get a new one?

  I have the SSID number, but don't remember my password for the WI - FI connection. How can I get a new one in order to connect my new tablet to the network?

  Hello Jackie,.

  Thanks for the reply.

  We are pleased to know that the problem is solved. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows. Please contact the Windows community.

• Can I have a home network that is a mix of wired and wireless, and be able to use devices connected to the pc without wire while working from a pc cable and the network map will show all?

  I have a router Linksys Wireless-N-large band with 4 catches on and 1 ethernet to my internet modem cable. Wireless connections work well in my relatively small house. Rather than to buy several USB wireless receivers, I thought just to use the ethernet # 1 and plug it into my computer close to the router.

  Hello

  Any computer that can connect to the router (wire or wireless) can be part of the same network.

• I get no "supported" when trying to connect your new monitor VGA cable. Everything goes well until he gets the logo of microsoft and begins to load vista and it comes up with the message of unsupported. Sophie Thanks__Errol

  RWhen I try to hang a new monitor with VGA computer cable runs and gives me the BIOS display then it starts to load microsoft. After a few seconds (maybe 30) it says no "supported" thanks for any help.

  Kraggyemember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  It's good to hear - it means that the monitor is OK and that it is compatible with Vista.  It is still unclear on the video card or the motherboard on the computer (or any other problem this computer might have) = but one step at a time.  You have made great strides and ruled out several possible causes that we must now check or test.

  What is the EXACT error message you are getting (Word for Word)?  Which is the key to product, the manufacturer, brand, model and serial number or your computer (I assume it's using the original video card)?  What i the manufacturer, brand and model of the new monitor?

  Even if you could get the Microsoft drivers (which I don't think you can), you should take them to the device manufacturer or the manufacturer of the computer, if they moved on the computer.  They are likely to be more current and have fewer problems.  And you want drivers, firmware and software necessary or required by the device (they will be either the list which is available or you can ask for help and they should direct you to what you need).  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you shouldget to the monitor, the video card and the motherboard and all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  I hope that drivers will solve the problem.  If not, we have to try something else (not sure what yet, but we will come with an option).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to connect to the network without wire stuck in airplane mode

  Hello

  I have a computer laptop inspiron 15r with Windows 8. My most recent problem is surface today.  Suddenly my laptop kept disconnecting my wireless connection and turn on airplane mode.  Finally, it is stuck in airplane mode and I am unable to connect wireless. I have a Dell 1705 Wireless card.  I tried everything, including restoring the default settings.  It also shows that my Ethernet connection is disconnected.  It's not since I have my Tablet connect correctly.  This all started when I tried to check the updates of windows. Any help is appreciated.  I have never known as many problems with a computer. It seems that I'm fixing always something.

  bela1950,

  In addition to what Jim said...

  Airplane mode - enable or disable in Windows 8

  Rick

• Unable to connect to the network without wire by Satellite L510

  Sometimes my laptop have problems with wireless, icons, it's a PC screen with a DSL line and a cross.
  Everyone asks why and how do cease to occur?

  I have to restart so I can use it again, but when restarting the screen goes out after a few minutes, so I hold button power off, then I start again.

  Hello

  > Sometimes my laptop have problems with wireless, icons, it's a PC screen with a DSL line and a cross. Everyone asks why and how do cease to occur?

  Hmm sometimes an old driver WLan could be a reason for such boring behaviors of Wlan connection.
  That is why it s always advised to be up-to-date with the WLan driver.

  Here you will find the latest Wlan drivers:
  http://APS2.toshiba-tro.de/WLAN/

  To update and keep an eye on this issue

• I'm trying to connect my new ipad to my officejet pro 8500 has more. not recognized by the ipad.

  message from the iPad: no AirPrint printer found.

  RFE, make sure that bluetooth is off when you try to use airprint. Bluetooth has been called to interfere with AirPrint. Then, download the latest updates from the HP product:

   

• Cannot connect to new modem/wireless router with Dell Inspiron 510 M, but our other machines will connect without problem.

  Old modem/router died, received the new modem and Netgear router separate from Comcast

  Two other laptops (MSI Wind Windows XP, HP 6930p-Windows XP) and my Samsung smartphone connect with no issues.

  Dell Inspiron 510 m is able to connect to the network without wire of a neighbor, but none of our other machines are able to because of the configuration of network security.

  When the network security key for our network on the printer Dell, Dell dialog box displays only 8 digits, but the security key is 10.

  Hello

  Replace the key to WEP (wired equivalent privacy) security check and the settings of the router if you are able to connect. Follow the steps mentioned below.

  Change the WEP key in Vista:

  a. click the Start button.

  b. click Network in the right column in the start menu.

  c. click Network Center in the menu bar horizontally.

  d. click reorganize wireless networks.

  e. double-click the wireless network you want to change.

  f. click on the Security tab.

  g. changing the network security key and the encryption type.

  h. click OK.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Anyone with the problem of not show apple tv on the same wifi to connect the new application remote control (with the last operating system both on device)?

  Tried to connect the new (launched in July 2016) Apple Remote app, I'm not able to add the Apple Tv from my iphone (5 c), because it does not show apple tv to connect even on the same wifi. I use the latest os on iphone and TVos 9.3.3.

  9.3.3 isn't the latest version of the software for your phone or your Apple TV.

  Try the following steps for the Apple TV 4, check if things work after each step if necessary, before you try the next.

  1. Restart the Apple TV (settings > system > restart).
  2. Restart the Apple TV by removing ALL cables for 30 seconds.
  3. Restart your router. (Also try to remove the power cord for at least 30 seconds)

• Error message trying to connect to the wireless network

  Trying to connect my new netbook to my wireless router, I typed the number 10 WEP key, but on the list of wireless network, it says I'm connected but it's 'validation of identity '.  And at the bottom of the screen, I get the error message: unable to find a certificate of Windows to connect to the network. And of course, I can't get online.  I tried to repair the connection and troubleshooting, all to no avail.  How do I overcome this barrier?

  Moecat,

  Take a look at this thread: http://social.answers.microsoft.com/Forums/en-US/xpnetwork/thread/f68d2ea6-51c4-4b86-a5de-da4d06afb50a
  That should take care of your question, let me know if you need help!
  Thank you for using Microsoft Answers!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm trying to connect my Acer X 1160 projector to my new HP laptop without success. Any suggestions

  I, ve recently bought a HP Pavilion laptop g6 running Windows 7.

  I tried to connect my Acer X 1160 projector for some time now without success.

  I find the projector in my devices, I downloaded records, etc., but no response.

  The message of the projector is "no signal".

  I, ve tried the obvious 'connect to a projector' without success.

  I would be grateful of any advice.

  Hi Varvee,

  Contact HP Support for help from here: http://www8.hp.com/us/en/support-drivers.html and be more specific on your laptop or maybe you can try http://www8.hp.com/us/en/contact-hp/phone-assist.html of the hotline, if he bought fairly recent.

  Good luck!

• 1st generation ATV dead. Orange light but no screen and no resetting of distance.  I tried direct connection to Mac and iTunes open and he's not here.  Is it possible to restore to the factory without screen or remote work

  1st generation Apple TV is dead. Orange light but no screen and no resetting of distance. I tried direct connection to Mac and iTunes open and he's not here. Is it possible to restore to the factory without screen or remote workin

  I guess you tried maintained low men together for about 6 seconds - silver 1 ATV that will restart to the diagnostic partition but who would rely on the hard disk is functional and if it was ok that wouldn't work with the logic board failure.

  I guess you have not fed and attempted to restart.

  In case your AppleTV think it is paired with another remote try Menu and left arrow for 6 seconds - the light now intervenes when you press the buttons on the remote?

  Also, it could be in the video mode bad - try Menu and upward arrow together for 6 CES switch video modes, but implies that he actually started OK.

• I am trying to connect a Macbook Pro with Retina display for a new monitor Dell Ultrasharp 3014. I tried to connect via HDMI and DVI cable supplied with the monitor but the monitor says "no cable dvi - d".

  How to connect a Macbook Pro with the (just bought) Retina display for a Dell Ultrasharp U3014's new? I tried to connect with HDMI and DVI cable supplied with the monitor but the monitor says "no dvi - d" cable. I never tried to do that before so I'm lost.

  Use a mini-displayport cable. Connect to one of the ports Thunderbolt the MacBook Pro to ultra-compact monitor entry.

• Cannot install old set of 16 bits on new 64-Bit Windows 7. Tried to solving problems of compatibility without success. It ran OK on Vista, XP... all the way back to Windows 3.1.

  Cannot install old set of 16 bits on new 64-Bit Windows 7. Tried to solving problems of compatibility without success. It ran OK on Vista, XP... all the way back to Windows 3.1.   Any ideas?  It is my wife's favorite.

  Hello giant,

  It is not possible to use 16-bit on a 64-bit computer applications/games.

  However, you can download and install Wondows XP Mode for windows 7. Later, you can install your 16-bit application in XP mode.

  You can download the application from the link given:
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  After back and let us know if it helped to solve your problem.
   
  Thank you and best regards,
  R uma - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.