TS140: How to replace 3.5 "boot with a 2.5 SSD disk"?

Similar Questions

• Satellite Pro L40 - how to make a dual boot with two recovery disks

  A small question;
  How to dual boot with two recovery disks ive got with my laptop (Satellite Pro L40)

  discs 1 & 2 are windows vista buisness
  discs 3 & 4 are windows xp profesional
  Disc 5 is updated the bios

  The guy where I bougt garage computer (a metal regular store named expert) says that it is posible with discs tose.
  I have
  I already have a partition, but when I boot from disks, is not has the option to select a partition

  Thanks already

  > Satellite Pro L40 - how to make a dual boot with two recovery disks?
  Short answer: you can't do that. Maybe if you have two hard disks (I tried didn't) but as much as I know your SP L40 has only one.
  Ask this smart guy, how to do this. Maybe it's a useful tip.

• How to create a dual boot with Vista installed on my Satellite U400?

  Hello

  I just bought a U400 - 17 H with vista installed on the HARD drive. I would like to create a dual boot with XP Pro.

  I have only a drive HARD aleady with 2 partitions (1 for vista) + 1 for data.
  I want to cut the partition vista in two 2 pieces to install XP Pro.
  At the end I'll have 3 partitions 1 vista (65 MB), 1 xp (65 MB) and 1 data (125 MB).

  Is it easily to create a new partition ok (I guess only on vista)
  but is there a program dedicated to install another OS and create a dual boot.

  Please help me because I like many things the other way around. I'm sure it's possible, but what are the right process to have at the end of two BONES and the choice at the start of the laptop

  Thank you
  Gerard

  Hello!

  Create a new partition for Windows XP and install it. There is no problem.

  After that, you need to restore the Windows Vista boot loader. You can do this with EasyBCD. Install and start the program.
  Go to the tab "Add/Remove entries". You will see that there is only one option available in the bootloader of Vista at the moment. In the "Add an entry" section, replace the drive in the menu drop-down of C:\ E:\. Change Type "Windows NT / 2 k/XP / 2 k 3" and the name of "Microsoft Windows XP". Then click on 'Add an entry' and 'save '.
  Then go to the "Manage Bootloader" tab make sure "Reinstall the Vista Bootloader" is selected, then click on "write the MBR.

  Now you can restart the laptop and you should have a full system dual boot to work.

  Good bye

• Re: Satellite A50 - how can I change the boot with BIOS password priority?

  I have a Satellite A50. I need to restore to factory default to recover DVD, how do I boot from the DVD?

  The default boot priority is the HARD drive and is more bootable has been formatted. My BIOS is password protected, how can I change the boot priority? After having inserted the password, its always boot from the HARD drive.

  Thank you

  The boot priority, that you can change in the BIOS.
  Go into the BIOS with ESC, enter your password and then you can change it.
  But don t forget to save the changes.

  That s all and then you can boot from the CD.

• How to replace a specific color with transparent colors?

  I need to get the image of a control, but I want to change the background color of the control with a transparent color (like the handly image editor).

  I can't use the library IMAQ, so I would use the palette of the 2D image.

  I can read the pixel of data image by pixer, but... once the color replace is located, how to replace them with transparent?

  Thank you all

  It looks like you want the Mask.vi to 'create '. If this isn't the case, you can provide a code that indicates what type of situation, you do business with.

• How can I configure dual-boot with Windows XP and Windows Vista?

  Vista/xp problem

  Help a friend who currently has installed vista.  What should I do if I want to dual boot with xp (not installed at the time)

  Thank you

  Hello Matthew forse,.

  Here is an excellent tutorial on how Dual Boot Vista and XP.

  Follow the information contained in the 4 pages to the letter.

  I use it in my I.T. business on client computers and recommend it carefully.

  http://www.syschat.com/dual-boot-Vista-XP-Vista-already-1946.html

• How to replace a new HDD with the old?

  Original title: new HARD drive

  IM installing a new hard drive to replace my old. How can I reinstall windows 7 with all my files and programs?

  Here are a few options:

  • Create an image of the old disk, and then restore that image to the new drive.
  • Use a third-party disk cloning tool.

  The first option requires a good dose of experience. Ask a computer-savvy friend to help you.

• Satellite P840: How to create the secure boot with UEFI Bios recovery disk

  Hello

  I have laptop P840 that came pre-installed with Windows 8, which I've upgraded to Windows 8 Pro.
  I then updated to Windows Pro 8.1 by Windows store. Please notify:

  1. how to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.

  2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  3. check partitions with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  Your help will be very appreciated.

  Best regards

  Romero

  I found your previous thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74272

  > 1. How to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.
  To be able to boot from sources other than the drive HARD internal, the boot mode must be set to the CSM and secure boot must be disabled!

  > 2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  Your laptop has been preloaded with Win 8. Right? For example, the USB flash stick memory you just use the Toshiba Recovery media creator contains the Image of Toshiba with Windows 8. Don t mix this Toshiba image with the image that can be created using Microsoft's own backup and restore function. Both are different pictures!

  > 3. Check it with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 partitions primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  The last partition contains the files on HARD drive recovery. Usually this partition will be created again when you use the Toshiba Recovery disk to put the laptop back to factory settings. So in the case where you n t need this files or the partition, you can delete

• How to replace an old time with a new Capsule?

  I am replacing my old Time Capsule (version 2008, 1 TB) with a new one (2016 2 TB).  How can I go about without screw it up?

  There is an option in the configuration... Plug the new TC on the network... TC WAN in all that is the current main router. If it's the old big TC.

  Open your Mac and go to the airport utility. (Your Mac must be Mavericks or later)

  Click on other WiFi devices (1) in the upper left corner... It will start the installation wizard.

  The wizard will choose the wrong thing... to extend the old TC's wireless... Do not worry.. Click more options at the bottom left.

  

  List of other Options choose, replace an existing device.

  

  The rest works basically automagically.

  The new TC will take the old values of TC... the old TC will be given factory.

  The end of it you will say to remove the old TC and plug the new TC in its place... voila... piece of cake... walk in the Park.

  You can then determine what you do with your old TC.

• How to create the dual boot with Red Hat Linux and Vista on Satellite A200

  Hi all!

  I have a Satellite A200 pre-installed with vista home premium and I would install another OS that is Red Hat Linux Fedora Core 7.
  Can someone advice me how do? I'll be very grateful to receive your answers. Thanks again!

  Well, I put t use this Linux distro on my laptop but I used the Knoppix Live CD and it was very easy.
  It was not necessary to install anything. I simply booted from the Live CD and I could use the full Linux operating system.

  So, it might be better to use this Linux live CD instead of the complete installation.
  I think that the main problem would be available to the driver.
  The fact is that Toshiba does not support Linux on laptops and so Linux drivers are not available.

• How to replace Labview RT10.0 with RT8.2 on the remote system?

  LabVIEW RT10.0 is installed on our new PXI-e8133 controller. Our host is running Labview RT8.2. That's why I'm unable to download and run a VI from the host to the remote system.

  I want to download RT8.2 between the host and the target (so replacing/removing RT10.0 on the remote system). On another controller, we could choose the 'old' RT8.2 by download to MAX (which replaces the latest version). This is not an option with the new controller. Add/Remove software MAX, available versions of RT on the host is 'none' (even if RT8.2 is listed under the software on my system).

  How to install RT8.2 on the remote system? I have to completely remove RT10.0 first of the remote system?

  Thank you!

  Unfortunately, the minimum Version of the compatible LabVIEW RT for the PXI-e 8133 is 2010. This means that you must either upgrade to LV2010 or choose another controller.

  Kind regards

  David Ashlocke

  Technical sales engineer

  National Instruments

• Replace Windows dual boot with XP Sp3

  I have a dual boot (Vista & XP) system, the XP is incorrectly installed because there was an error during installation. I want to remove the two systems and install a new XP with SP3.

  How can I do this?

  Pls help.

  I have a dual boot (Vista & XP) system, the XP is incorrectly installed because there was an error during installation. I want to remove the two systems and install a new XP with SP3.

  How can I do this?

  Pls help.

  Make sure that all the * your * stuff is backed up.  Locate your installation media (for Windows XP and you want to install applications) and your serial numbers and product keys for the same.

  Equip your Windows XP support.  Boot from it.  The installation process to remove all the partitions that exist during the installation.  Create new partitions.  Install Windows XP.

  Have you installed the Service Packs again?

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the rest of the updates.  It will take still several visits to the web page to update and restart.

  Download your installed applications.  Update.

  Restore your personal data.

• XPS 2720 - how to replace 32 GB SDD with the largest

  Hello

  I want to replace the current 32 GB SDD with a 256GB SDD. I don't know how many records the 2720 XPS can hold and what kind.

  -Can it accommodate a new SDS plus the drive HARD and SDS that are already there?  Alternatively, if I need to replace the current SDS? If Yes, should it be mSata or the computer can hold the two SATAs?  I'm looking at the Samsung 840 Pro 256.

  Ideally: HD 2 TB, 256 GB, 32 GB SDD SDS

  Good: 2 TB, 256 GB SDD

  Bad: Can't hold an another SATA

  Any help is appreciated. Thank you.

  Hi Racarius,

  Dell XPS 2720 can be configured with 32 GB, 64 GB or 256 GB mSATA car and 3.5-inch SATA 3.0 HDD capacity of 1 to 4 to.

  You can purchase the 256 GB mSATA drive to replace the 32 GB mSATA drive.

• Satellite A300-1ND - how to make a dual boot with XP and Vista?

  Hello
  I have just pursached a Satellite A300-1ND with Vista Home 32 pre installed.
  I intend to install XP SP2 as a dual operating system.

  Where should I start? What should I be wary and be careful?
  What bios update (XP update last 1.7)?

  Thanks, I appreciate all the help

  Before you try to install Windows XP to create a new partition.
  Then boot from the XP CD and install it. After that, you must restore the bootloader of Windows Vista using EasyBCD, for example.
  All that s!

  I found a solution here that might be useful for you:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=155536

• How to replace the hard drive with an SSD on a model of end 2011 MacBook Pro 15 inch, A1286

  Hello

  I would like to replace the hard drive on my model of end 2011 MacBook Pro 15 inch, A1286 with a disk solid state drive (SSD). First of all, I would like to know if this is possible. Second, what is the best way to do it? I'm under the Yosemite OS if that makes a difference.

  Here are some technical details of my current system:

  -MacBook Pro 15 inch, late 2011 model A1286

  -OS yosemite

  -16 GB of memory/RAM

  -Currently using stock HD

  All instructions step by step would be helpful with what software should I use to make backups of my current operating system (e.g., SuperDuper). I would also like to know what tools or material I need like type of screwdriver, cables to transfer data to the SSD, etc.. My goal is to not have to reinstall each app one by one on the SSD, but if that's the only way to do it then it's okay.

  Thanks in advance for any help.

  You can see instructions OWC here. Tools are mentioned in the discussion (I used a plastic knife picnic with the stronger edge somewhat blunt for nylon pry tool). I suggest you invest in one of these external fences. Install the SSD in who and clone internally externally with CarbonCopyCloner or SuperDuper. Then move the external drive of the internal drive after the start of the SSD in the external to confirm the operation.