Similar Questions

• Radio Smartphones Disable blackBerry mode night

  I just want to know exactly what is meant by radio on blackberry (i.e. turn off the radio for bedside mode option - what exactly am I activation or deactivation?)

  From the manual...

  To disable the connection to the wireless network, so that your device does not benefit from calls or messages when bedside clock mode, change the field off the Radio to Yes.

  It means so disable the data without wire/phone to GPRS connection / 3G etc.  It probably includes WiFi and Bluetooth too.

• Smartphones Radio blackBerry

  Listening to radio on the BB out of the distribution of your data? IE: 500 MB/month.

  Hello

  listen to the radio on a BlackBerry smartphone will use the data from your data plan.

• What happened to my Acrobat Connect Pro room?

  My apologies if this is the wrong place to post, but I can't find anywhere else!  I get an error message saying that my Adobe Connect room is down for maintenance. I thought it was going to far in December, but not now?  I really hope that you guys are not charge me for these last weeks of use!   Please let me know what happens. Thank you!

  Adobe ConnectNow is no longer available. She was originally scheduled for decommissioning in December 2012, but we left it up to several more weeks to facilitate the transition to Acrobat Connect Pro.

  I don't know why you get a message that it is down for maintenance. I will consider as this is not correct.  When I try to go to my old ConnectNow room, I see this:

  Connection reset by peer

  If you had a subscription to Acrobat.com, then you should have been sent the instructions for use of your free account for one year for Adobe Acrobat Connect Pro.

  For more information, see: http://forums.adobe.com/docs/DOC-3321.

  If you have prolems with Acrobat Connect Pro, please post your question here: http://forums.adobe.com/community/adobeconnect

  or contact the Support Connect (http://helpx.adobe.com/adobe-connect.html)

• To access the Radio button values

  I have such a problem to the value of the option button selected in a group. Help!

  I put 5 radio buttons on the stage and gave them all the 'Question1' groupName in the components Inspector. They each have their own names for the instance and value which is also defined in the components Inspector.

  When I go to access the Group (via test movie) and check the value that is selected, I get this error:

  "Access of undefined property Question1.

  Here is the code I use:

  var Radio1:String = new String();
  Radio1 = Question1.selection.value;

  SubmitBtn.addEventListener (MouseEvent.CLICK, clickHandler);

  function clickHandler(eventObj:MouseEvent):void {}
  trace ("clicked");
  trace (Radio1);
  }

  Other problems that I have with this code is the flash player does not believe the value of the object of the radio is a channel... so what is the data type of the property value?

  Struggeling powerfully,

  -Sage

  I edited this post and the line that has been fixed:

  trace (rbObject)

  which should have been

  trace (rbObject ())

  retry code.

• Mandatory radio as XML button

  Based on the examples here and here I have a datagrid that uses an XML object as its dataprovider. The xml code goes like this:
  
  < questions >
  < question >
  < message > who are your heroes? < / guest >
  < answers >
  < response >
  < address > true < / correct >
  < text > Luther Higgs < / text >
  < / answer >
  < response >
  < address > false < / correct >
  < text > Barney Fife < / text >
  < / answer >
  < / answers >
  < / question >
  < / questions >
  
  Correct (if a bit confusing) xml. I have two columns in my datagrid. The second column binds to questions.question.answers.answer.text and works very well. The editable datagrid is set true and I am able to click on the second column and type and it records the response in the object xml very well. The problem lies in my first column. The mxml looks like this:
  
  < mx:DataGridColumn headerText = 'Correct' >
  < mx:itemRenderer >
  < mx:Component >
  < mx:VBox horizontalAlign = "center" >
  < mx:RadioButton id = "myRadioButton.
  buttonMode = "true" useHandCursor = "true".
  Group = "{outerDocument.myRadioButtonGroup}" selected = "{data.correct}" / > "
  < / mx:VBox >
  < / mx:Component >
  < / mx:itemRenderer >
  < / mx:DataGridColumn >
  
  The problem is that the radio properties some buttons are not related to the xml data, which is set to true does not appear as selected. If I set the datagridcolumn's editable property to false, clicking on the checkbox option does not affect the XML at all either. If I leave the datagridcolumn's editable property inherited by default true (based on the parent of the datagrid component editable property) when I click on the option button the default itemEditor is displayed (a text entry box) which contains the following text:
  
  < / answer >
  
  and when I come out of the Editor (click outside or press enter) the XML looks like this:
  
  < answers >
  < response >
  < address > true < / correct >
  < text > Luther Higgs < / text >
  < / answer >
  < response >
  < address > false < / correct >
  < text > Barney Fife < / text >
  < null > & lt; response & gt;
  & lt; correct & gt; false & lt; / OK & gt;
  & lt; text & gt; Barney Fife & lt; / text & gt;
  & lt; / response & gt; < / null >
  < / answer >
  < / answers >
  
  I've seen controls that do not have the written correctly xml path display the entire xml node rather than only the data, but I see no reason why anything should never reference just the closing tag. For me, this looks like a bug in data between the radio button and the xml object links.
  
  Just to clear the air in order to avoid suggestions that will work but do not meet the design requirements, what I need is a datagrid that has a radio (only one good answer outside the Group) group in the first column and channels in the second column, which should be editable. I guess I could write hairy event listener code and manually to hack things together, but avoid other headaches, I'd love to use data links for what they were intended to-I just need to know why it doesn't seem to be working properly. Many thanks in advance for any help.

  The research of the LiveDocs, revealed the answer. Under the heading "to the aid of an E4X expression in a tag", I found this case instead of

  
  buttonMode = "true" useHandCursor = "true".
  Group = "{outerDocument.myRadioButtonGroup}" selected = "{data.correct}" / > ""

  I have

  
  buttonMode = "true" useHandCursor = "true".
  Group = "{outerDocument.myRadioButtonGroup}" / >
  

  It works beautifully.

  Apparently binding between XML and the selected property of a radio button (which is of type boolean) needs of the rather than the rating of the brace in the tag.

  PS The link on livedocs is here:
  http://livedocs.Adobe.com/flex/201/html/wwhelp/wwhimpl/common/html/wwhelp.htm?context=live Docs_Book_Parts & file = databinding_091_05.html #177459

• iCloud don't sync imessages, contacts

  Hello

  I had some iphones and macbooks for a long time and always perfectly switched to a newer model with icloud (Time Machine)

  recently, something broken my iphone 6, it began to freeze, and because my job requires always be on, I quickly bought a 6 s. I discovered that the problem wasn't in the SW HW, and he was also present on all my backups icloud. So first of all time, I installed a phone like new and activated my icloud account.

  Long story short, after a new installation, Icloud has not recovered most of my iMessages. I got to this point, but nothing before.

  I've decided I can live with that I have all my messages on my mini ipad and my macbook, so all right.

  Then I realized a lot of contacts are missing from my macbook air. They have been removed somehow. This I discovered that a text from my oldest friend, whose number is in Favorites, is not associated with a name on my macbook, but it does on my phone. Around checking on icloud.com, my macbook and my phone, I have foud here are couple hundred contacts that have been deleted to icloud.com, macbook, but they are on the phone.

  I then bought a new macbook 12 ". I moved on eveyrthing with Time Machine, and, of course, he has the same problem. He has iMessages to 2014, but lacking in contacts.

  Today, I bought a Pro 9.7 "iPad. He got my restore ipad mini. There imessages around 2013, but missing the last two weeks when my ipad mini was not justified to icloud. It also lacks contacts.

  As an experiment, I disabled the synchronization of contacts on the iphone icloud and asked to delete the contacts. This erases all the contacts. This means that the phone store these contacts on icloud (not in another box for letters or group), but don't download them. I have back since my icloud backup phone.

  so now I have:

  MacBook: imessages contacts 2014-today ' today, missing

  iPad: marc imessages 2013-2016, lack of contacts

  iPhone: imessages February 2016 all contacts so far

  I tried:

  -turn the imessages market on all devices

  -selection and de-selection of imessage e-mail addresses

  -turn on synchronization of contacts and power off all the devices

  -fusion of contacts with icloud on the phone

  -reboot everything and cursing a lot

  can anyone suggest something that I have not tried? This is something I have not expeted to apple, I always had the best experience with icloud, and now I'm grabbing around my iDevices for pieces of missing data. Very annoying.

  When you configure devices as new imessages will not be restored and it is a normal behavior. While the problem of contacts is left and if you have them on your phone and in icloud.com site, then you just to make sure that your ipad and your mac has icloud contacts enabled and activated in groups.

  Your message is quite long and it is good, a detailed description, but it is also difficult to predict if I got what you want and if not, sorry.

• Atrix HD does not connect to LTE

  Hey everybody!

  I've recently upgraded to HD Atrix Saturday night and I love this phone! However, there is a minor problem, I noticed. I came from the Atrix 2 before this phone, so they had to issue a micro SIM (since I regularly used SIM card). I'm getting a signal strong and get the '4G' data (like HSPA +). However, I checked the AT & T coverage map and I'm square in the middle of a 4 G LTE coverage area. The problem is that the phone will apparently not be connect to the 4 G LTE network. Is there something that I need to change in the settings or I have to go see AT & T about it? I already checked my APN settings and they all seem to be default.

  The phone connects automatically when, in an LTE service area. I'll make sure that you have a data plan LTE and LTE-advanced base, and if you do, I would ask for a new SIM card.

  Those are the two main issues. There is no way to turn on or off the LTE on the Atrix HD radio.

  Good luck and let us know how it goes!

• Need help with network home using Airport extreme

  I need help with my home network.  I'm not very aware when it comes to all things network.  Here's how my network is currently set up.

  Cable modem to Airport Extreme for Gigabit Switch.  Cables come out of the switch to all areas of the House.  I have 2 other extreme airport connected in other rooms of the House directly on the wall that dates back to the switch.  I hope I am explaining that properly.

  My problem is that this seems to have caused some of my connections cable does not work.  When everything is configured, it has worked well.  All connections in the House worked.  Then we have disconnected one of the extreme airport and moved to another location in the House to have the best wifi coverage.  Since that time, a lot of the ethernet wall plugs are not working.  For example, when I plug in my Macbook Pro in making ethernet in my kitchen, it says connected but it has an assigned ip address and cannot connect to the internet.

  Any help you can provide would be great.

  I would like to get the return tech to help you to...

  But it is likely that something (or someone) has tampered with the settings.

  The layout is fine... but you can cause problems with the network by creating a loop.

  This can happen because the AE you moved is connected wrongly... somewhere in the network it is connected to the switch again.

  Or AE is set to expand wireless... It's FAKE... It will loop the network on the back main EI wireless.

  Unplug the two AE you have that function as extensions...

  Turning off everything else... then it works again...

  Do it in this order.

  Modem... Wait 2 min

  AE... Wait 2 min

  Switch.

  Now check that the network is working properly... power of customers in various locations and make sure everything is good.

  If so, then manually reset the two AE of factory and redo their installation.

• Simple PID regulation

  Hello

  I use an old version of LV, LV 6i to be exact. Now I'm building a control temperature for simple PID control of a room. I use as my NI PCI-6024E data acquisition card. But, in the middle of trying to get the right program, I stuck to the PID regulation. I use the .vi "simplePID" and connect everything that is necessary, the limits of high and low, the parameters (P, I and D), set point, take Subvi 'Temp'.vi, and connect to the variable process and exit the .vi 'simplePID' to a chart.

  The problems occurred when I run the application, the temperature did give lectures as usual and I set the setpoint and limits and also settings. But it seems that the "simplePID".vi don't not responds to these values. As the program is running, I clicked on the "simplePID".vi and see that the value of the settings inside there is not changed to the values that I have previously set. Why is happening. I'm missing something important.

  I have attached photos and my VI for your reference. Thanks in advance.

  

  What do you mean by Reentrant is on the right execution tab?

  I checked it and its already "ticked" and I checked the Reentrant and try to run the VI, still no response from the simplePID.vi.

• IMAQdx timestamp off-by-one

  I have a network camera and provides its own timestamp using the IMAQdxTimestampHigh and IMAQdxTimestampLow properties. I'm observing something that I don't expect - the timestamp seems to be extinguished by a single image.

  I have a simple VI which illustrates this behavior. In it, I log IMAQdx with my camera, set up a puncture, reset the timestamp counter and read the images in order. When you look at the timestamp associated with each image, the first image has what seems to be the timestamp of the nth + 1 grabbing the previous image, as if the obsolete data was left in memory.

  To see this behavior, run the 'exercise Timestamp Reset.vi' twice. Before running the second time, note the value for "last Timestamp". When you run the second time, the value of "first Timestamp" is slightly higher than the "last Timestamp", which suggests stale data. I expect 'first Timestamp' to be close to zero.

  What could cause this behavior, and how can I fix my code? So far I have tried:

  1. Move the "Reset Timestamp Counter.vi" as it is called immediately after created the session IMAQdx.
  2. Create a session of IMAQdx, reset the time stamp counter and by disabling the session before creating a second session of IMAQdx for the clamp.

  My particular setup:

  • Allied Manta MG 504 b ASG
  • LabVIEW 2009 SP1
  • IMAQdx 3.9.1

  Hello

  It's a really nice and clean example you provided!

  I wasn't able to replicate this with Basler Ace cameras or AVT GX1050 I had very practical (the first timestamp was always correct). Given that IMAQdx decodes it directly from each image, as they come it seems unlikely that it should be able to cause this condition, unless the camera sent actually it.

  My suspicion is that it is a problem of firmware on your camera Manta. Can you see if there is a firmware update, you can install?

  In addition, if you could provide a network trace of something like wireshark showing traffic over the second acquisition, it should be very easy to refine, if it is in the camera or IMAQdx.

  Eric

• Media Player - create CDs for use in car stereo

  I created an audio cd from my pc to play on my car stereo.  He plays the first track and continues until what I hit the button "skip" date on which he plays the next song.  How can I create a cd that plays all the tracks automatically?

  Hello

  What version of the operating system you are using on the computer?
  
  The audio CD can be played in almost every CD player, including those found in
  stereos, domestic, radio cars and computers. Your car radio does not support the format of the files whose data DVD burned. You will need to burn audio
  CD instead of a CD and data verification.
  You can select the speed of lower combustion for optimum results.
  Access the link below for more information about burning a CD/DVD in Windows Media Player:
  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player
  Additional information:
  Change settings for burning a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player
  Should which CD or DVD format I use?
  http://Windows.Microsoft.com/en-us/Windows7/which-CD-or-DVD-format-should-I-use

• Different facades on 3 different screens, same data collection

  Hello

  I'm having a problem on where to even begin with this problem. I consider myself a beginner-intermediate LabVIEW user.

  I'll do some testing to a facility that I work at. We need three different front panels during the test in the room of data acquisition, in the firefighter tech room running and one in the room viewing. The question I need assistance to resolve (I don't know where to start and have looked everywhere), it's how can I show three different front panels on three different screens. We have a lot of equipment coming into the system, but I want only to produce temperatures on some analyzers gas to some and a red LED in the control room and fire tech (not in the viewing room, we don't want to scare people if something goes wrong!). I have these set up just fine and they work based on thermocouples that I tested.

  I need be sure that the control room can read all data arrive, even if it is not displayed on the screen, and 3 different facades are required. How can I do this without having to run 3 instances of LabVIEW? Is there a way I can use S-video or something, or to incorporate subVis appears on a screen somehow?

  We are connecting to a FieldPoint system as well if that helps. I'm using LabView 8.6.

  I'm not going to attach the code because it works, I just need to know how to integrate all three.

  Any help would be greatly appreciated. Thank you very much!

  Tanya

  I have no idea on the video.  But LabVIEW has built into the web server where you can view the vi via a web browser.

  Here are some links, also do a search and see if it would work.

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/11017

  http://decibel.NI.com/content/docs/doc-5776

  http://digital.NI.com/public.nsf/allkb/7B5D6CC1CBCE32C98625716C00828BF4

• Modem DIMENSION 4600i stopped now I can't reconnect?

  Greetings

  and

  THANK YOU for your time

  My DeLL DIMENSION 4600 worked as usual yesterday and it was raining hard, I played music from the hard drive to start both music repeating like a vinyl record stuck?

  (remember vinyl, I hope?)

  MOM

  I'm in the room and close the computer and restarted. Everything was going well until I tried to connect to the internet? When I clicked in 'connect', I get

  CONNECTION ERROR

  ERROR 633

  THE MODEM (or other connecting device) IS ALREADY in USE OR NOT CONFIGURED PROPERLY"

  I went to the control panel and clicked on

  "OPTIONs of MODEMS and.

  I click on modems to bring up the page it States

  DESIGN THAT WORKS CORRECTLY

  If you have any problems with the device, click "TROUBLESHOOTING" to start the troubleshooter.

  So I click and nothing happens? So I click the icon for top page "DIAGNOSTICS" and click the "QUERY MODEM" and get

  "THE PORT THAT THE MODEM IS ATTACHED COULD NOT BE OPENED. THIS MAY BE THE RESULT OF A HARDWARE CONFLICT. CHECK THE DEVICE MANAGER TO VERIFY ALL DEVICES ARE FUNCTIONAL. »

  I go to the DEVICE MANAGER, click modem and see

  DRIVER, DISABLE, UNINSTALL, UPDATE CHECK FOR CHANGES ON THE MATERIAL PROPERTIES.

  The modem is stock

  CONEXANT HSFi Smart V.9 X 56 K DF PCI COM 3

  in SLOT 2 (PCI DEVICE 1 FUNTION BUS 2 0)

  So the only one who seems to apply was 'Find the hardware changes' but I have no inFo? None of the others seem to be useful?

  ALL I can think is a power surge had come by telephone line see there was a storm. But at this time I am out of ideas?

  Help, please

  This is my main computer and something must be done quickly.

  Thanks again for your time.

  IRON EyEs
  

  'º¤o, ¸¸, o¤º greetings ° °' ° º¤o, ¸¸, o¤º

  Well I have and now type to you through the DimensioN 4600 PC once more

  The new ModeM is connected now and all is well.

  so far.

  I uninstalled all the settings of the modem last night and after you run the computer turned off and just hoped that any program that was underway in the background TRYimG to use the FaX, modem, etc.. HE would STOP, because there was nothing to connect too.

  up to 20 hours later

  I hung most recent modem in the computer, it is, he saw the "new hardware" and then loaded the drivers of my ModeM HelPer album. Then linked diagnoses on this CD and all verified fine!

  So what is the lesson learned?

  # 1. It's true! better to cut in lines to the electronics in an ELECTRIC or ThunDeR storm. or at least have some surge protectors.

  # 2. IF nobody helps you to keep searching online, there are helpful souls always on inTerneT, you just have to find them, or their former position.

  # 3. Do not give up.

  I'm happy looking at my big PC. monitor and not this little INSPIRON 700 m screen, but with her I would could not order the new modem or connect to the internet. so best to always have a spare computer.

  Thanks for your time.

   

  (((~PEACE~)))

   

  IRON EyEs
  

   
  

   

• Wipe the blackBerry Z10 my Z10 is stuck at 99%

  My Z10 is stuck all wiping for 9 days

  It was restarted 3 times and still blocked

  What should I do?

  I'll wait for more?

  Help, please

  I did not make myself. You may need to get yourself with trial and error. Then...

  Launch the link.

  Remove the battery of the Z10.

  Connect the Z10 to the computer via the USB cable.

  Insert the battery in the Z10. You should hear the computer detects the Z10 connected. You may see a message on the link at some point after that connect you something indicating not being able to communicate with the device and asking you if you want to repair (or he can say reload OS instead of repair).

  If you see the message, select Yes. If you do not see the message, select automatically search for updates, or recharge it or something else. The point is that you want to have the link to grab the device at startup before it starts and goes back into the routine of wiping security.