TV not reconised
My I touch 2 does not reconise my TV since I've updated to 9.3 any ideas to fix this.
Using AirPlay?
Disable the AirPlay then turn it back on.
- On your iOS device, slide up from the bottom of your screen to open the Control Center.
- Tap AirPlay.
- Type on your device at the top of the mailing list.
Restart your Apple TV by following the instructions in this article to support > How do you restart your Apple TV - Apple Support
Tags: iPad
Similar Questions
-
Satellite click mini external hard drive not reconising or external DVD drive
Hi guys,.
I recently bought a Toshiba satellite click on mini, tried to use my external hard drive, but its does not at all. Any ideas on how to solve this problem?
It is a Seagate 250 GB hard drive. Thanks in advanceIt is powered by usb? If yes the hard drive turning upward? There are the sounds of rattling of the reader?
-
Advised that PC does not reconise the USB hard drive or extertnal
I have a XP PC. A year ago I was warned when I inserted a USB stick that my PC does not recognize it. a friend told me to download a new driver for it, I went to their Web page and didn't understand where I could find a driver for it. Because he didn't have a lot of information about it, let him.
I had a hard drive from my previous PC and bought a caddy for her, to use as an external hard drive. It worked for awhile but then recently I was informed that the PC does not recognize it. I tried to get a new driver for it but I don't seem to be able to find on the web pages of manufacturers. I have also been informed that I may need to download a new driver for the Caddy if that is the problem.
HELP:-what I look on a web page of manufacturers down load new drivers?
Is there an easy way to do this?
Hi Allen,.
Follow these methods and respond with results.
-
Cannot add printer Email Addess is not reconised?
I have a Photosmart aio eprinter (B210a), who has worked previously via email address, it's now does not work.
The printer works great as a wireless printer with local wireless network devices.
I have already setup the printer using management system online to HP printer, which worked great, but now shows ALL installed printers.
I tried to ADD a printer, but the online system says that the code of the printer is invalid.
It is said that I should use the printer email address, I checked on the printer itself. But it is not recognized.
Previously, I managed all rights of access, printer queues screws etc. the system online so is possible to get that back?
Thanks much for any help you can give me
Dave, is the issue that you are experiencing ePrintCenter involving? If Yes, then there are measures we can take to address what is happening, I need to be sure that we are both on the same page.
We need to disable Web Services of your printer, and unfortunately because they have become separated, you will lose the original e-mail that you have assigned to your printer.
Success icon ePrint in the upper left corner of the printer that looks like this: .
In this menu select the option 'Delete Web services' and follow through. Then, return to the menu ePrint and reactivate web services. This should allow your printer to print a new code which you can then take our ePrintCenter website and register your printer.
I hope this helps.
-
suddenly the printer stop working iunstall and reinstall sound driver but still not working, I tried to check in the Device Manager but I found that the Manager of damage is empty.so please someoine can help me
Hey SidSD
Try to run the printer It Fix Tool
-
Reinstall xp with sata HD is not reconised
When you try to reinstall xp I can not get my hd to come I beleave it is a sata drivers can download the drivers on a cd or dose must be a casett had a bad virus before operation still really slow pc then reinstall so it dose work only reinstalled on EEI before any help is more than welcome sites ect thanks jim
Usually get you the sata drivers for your motherboard site controller or PC so important an OEM manufacturer and create the floppy - (the cd is not accepted) then you use the F6 option at the beginning of the installation of Windows XP to install drivers third 3rd floppy - if you forget this option, you will have to start all over again
-
Problem with Windows 7 not reconising not my garmin 305
Hello
I had several frustrating on the phone to Dell and garmin and no one can solve this probem.
When I connect my Garmin forerunner 305 to my laptop with Windows 7 I get an error message "device not found", I check my disks and peripherals and it loading OK but says training center "driver not found".
I uninstalled the software and drivers many times and reinstalled. I was on the phone for 2 hours at Dell.
The Garmin unit worked OK on my old laptop which uses Windows Vista.
I have download now my device to my old machine back up to a USB key and then transfer to my new computer with Windows 7 with the USB key.
Reference Dell gave up and Garmin cannot fix.
Can anyone help
John
Hi John265226,
1. are you able to use other USB devices on the computer?
2 is the latest drivers installed on your computer?Method 1
Step 1:
If this is the first time you use Windows 7, I suggest you check if its compatible with Windows 7 by using the link below and try the steps mentioned.
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Step 2:
If it's not compatible then try compatibility mode, you try to install the drivers in compatibility mode and check for the issue of do you need to follow the steps below.
a. find the installer.exe or setup.exe file in the folder.
b. right-click on the file.
c. on the shortcut menu, choose Properties.
d. on the Compatibility tab, choose the version of Windows (Vista or XP sp3), you want to emulate.
e. check the box "run this program in compatibility mode". Run the Setup programReference:
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
To download the latest drivers visit:
http://WWW8.Garmin.com/support/collection.jsp?product=010-00467-00Method 2
If you still experience problems with the program, post your request in the Garmin forums and check.
https://forums.Garmin.com/index.php
http://WWW8.Garmin.com/contactus/
Thank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Computor will not reconise SanDisk
When SanDisk put the computer into the media slot don't pick it up. We can down load to and from the disk. The disk is accessed through the camera. This problem can be fixed with out much hasle?
When SanDisk put the computer into the media slot don't pick it up. We can down load to and from the disk. The disk is accessed through the camera. This problem can be fixed with out much hasle?
Things occur. Hardware failure.
Is the media slot built into the computer or you have an external media player?
I guess that you are referring to a certain type of Compact Flash memory. Have you read this particular card sooner? What is capacity?
What happens if you try to read the media in another computer?
What happens if you try to play a different card on your computer?
-
USB not reconising not telephone when it is plugged
When taking phone in the habit recognize phone asking you to plug, but I
Hello Shirley,
1. What is the brand and model of the phone?
2. are you having the same problem when you connect other devices to your computer?
3. have you installed the software utility of the phone on the computer?
4. have you tried to connect the phone to another computer to make sure it works?
5. What is the status of the device under devices and printer and Device Manager?
Try running this utility for troubleshooting and to check:
If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
Open the hardware and devices Troubleshooter
Please post with the State of the question.
-
Satellite A60-CD/DVD not recognized - URGENT
Hi ive just bought my A60 laptop and Ive noticed that the CD/DVD drive is not reconised... nor in the BIOS! I installed the latest bios updates but still nothing... pls can you help me?
Hello
As Maier said in this case, it may be a malfunction of the equipment. If the device does not appear in the BIOS, it's probably serious. Please contact the service partner in your country. You can find them on http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true.
Good bye
-
Qosmio X 500-do not recognize 2nd hard drive
Hello
I had performed a clean installation of windows 7 Home Premium (64-bit) and accidentally formatted the two hard disk using custom window Installation.
Windows installation went well, but the system is not reconising hard 2nd drive.
Can someone please help and advise what I need to do to remedy this.
Thank you very much.
MARWON
Is the second HARD drive recognized when you open the disk management option in computer management?
-
install windows 8, but can not conect to my router netgear n900
Windows 8 is superb, but if dose me no good if I can't connect to the wireless network, I need to uninstall or fix the problem. I have the Netgear N900 Wireless Dual Band Gigabit Router WNDR4500 and the dose of windows 8 not reconise it may help someone
On Tuesday, February 28, 2012 20:20:25 + 0000, ReidCrossman wrote:
Windows 8 is superb, but if dose me no good if I can't connect to the wireless network, I need to uninstall or fix the problem. I have the Netgear N900 Wireless Dual Band Gigabit Router WNDR4500 and the dose of windows 8 not reconise it may help someone
Windows 8 does not yet exist. It's in a pre-beta test phase, with the
beta version about to be released. I don't know all the details about what
Works and what does not, but it is important to realize that the reason
Is that a test instead of a final release version, it's always
bugs in it and that Microsoft is looking for testers to inform them of
other bugs as they lie.In my opinion, unless you have a spare computer to install it, and
like beta software testing and bug reports to
Microsoft, by installing such software to test is looking for trouble.
Yes, you can install the beta version when it comes out, but for
almost everyone I advise strongly against cela and waiting
so he can be released.
Ken Blake, Microsoft MVP -
My laptop does not recognize my modem wireless of suddenlink cable/wireless.
My laptop dose not recinise my modem wireless of suddenlink cable/wireless, I had to format my hard drive and I lost the info. for the wireless modem, I tried the KeyCode and it will not reconise the code.
Hi Richard,
What is the number and the model of wireless modem?
You can get in touch with your ISP (Suddenlink) provider for further assistance on this issue.
-
After I install TSSTcorp CDW/DVD TS - L - 462 A ATA device of... CD/DVD drive, I played a cd & he played the cd. After I tried to back up my laptop, I was told to "put a DVD selected", so I did it, but it does not reconise dvd I set, so I put in a blank dvd, & press "use a dvd blank." but he did not read. It keep saying "install an accessible dvd writable", or "there is no cd or dvd in the drive," what is happening please help.
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
CD and camera not recognized in the bios
original title: cd and camera is not reconised in bios
My camera and DVD disc does not appear in Device Manager or the bios
A camera may or may not appear in the BIOS, but a DVD player should without a doubt. It seems to not have and be in need of replacement if the BIOS do not see it.
writing in the new message: * e-mail address is removed from the privacy... * My camera and DVD disc does not appear in Device Manager or the bios
Maybe you are looking for
-
BT does not work on Satellite A660-13D
Hello I have a Toshiba Satellite A660-13D, and since a few days, Bluetooth does not work.In device manager it tells me everything is executed, but BT does not open.Can someone help me with this? Message was edited: assignment has been translated
-
I just bought a laptop HP dv6 with Windows 7 64 bit. He came with system partitions and hard disk recovery. Once I set it up the way I want I want to use the Windows Backup and Restore utilities to create the System Image and DVD repair system. My
-
Where can I get toolkit LabVIEW 8.5? In particular, I am looking for the report generation tool. Thank you!
-
Reinstallation of the operating system
How can I reinstall the operating system for HP dv2000 laptop. I am currently using windows vista Home premium 32-bit?
-
Captured by e-mail, sending Spam
My email has been captured and sends spam to my address book. How can I stop it? It happened last Monday, and it happened again on Monday. How is this happen and how can I prevent it from happening in the future?