TX 1320us, win7, unable to connect via bluetooth

Similar Questions

• ActiveSync connects via Bluetooth

  I have just reactivated my cell phone after 2 years of no use because of an accident. I have always used ActiveSync to synchronize my Outlook on this pc to my phone. The phone is a Motorola MPX-220. The pc is a Windows XP Tablet. I recently downloaded and installed ActiveSync to back up on this pc after a reimage Windows XP Tablet.

  The phone connects and very good ActiveSync with the USB cable but I can't connect via Bluetooth. I tried and tried. On the phone, you can open ActiveSync and then press Menu at the bottom right and press 3 to select Connect Via Bluetooth. But nothing ever happens.

  ActiveSync on the phone says connection for a while and then not connected. Below that it says synchronize with Windows PC and then below it says errors: 15/11/2010-21:15. The errors Word is blue, so if I hit the Center enter button, a message opens up saying unable to connect. Check your remote access settings or proxy are correct, and then try again.

  I don't know what it means to me or what I should do. My home pc I'm trying to sync with is a tablet which has turned on Bluetooth. There is no proxy or by modem setting I have ever been. It's Time Warner cable with a simple Linksys router to share internet and printer via wire to 2 PC and wireless for iPod to my daughter.

  Could there be a problem with firewall that is new is due to the fact that I use now the antivirus Security Essentials, which has also a firewall, I think?

  Hello

  ·        What kind of Bluetooth do you use on your computer?

  ·        Your computer include Bluetooth or use something like a Bluetooth dongle?

  ·        What battery Bluetooth do you use on your computer?

  ·        Have you checked to see if you can update the Bluetooth software that uses your computer?

  I suggest you run the fix that is present in the article mentioned below.

  How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/883258

  I suggest you to contact ActiveSync forums to get help. Click on the link below.

  http://social.answers.Microsoft.com/forums/en-us/windowsmobileactivesync/threads

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• If connected via Bluetooth with car. Phone starts to compose himself after updating iOS 10

  After updating iOS 10: connection via Bluetooth for car, then phone (iphone more 6s) began to compose himself. My President iPhone which is not longer work well

  Hi Pharao-nael,

  I understand that after update your iPhone to iOS 10, he begins to call itself when it is connected to Bluetooth. I know it's important for your iPhone to work as expected, so I'm happy to help for this.

  Since this occurs only when it is connected to Bluetooth, the first thing you want to do is cancel the twinning of the car:
  Configure and use third-party Bluetooth - Apple Support Accessories
  

  Turn off pairing a Bluetooth accessory

  To disable the pairing a Bluetooth accessory, tap Settings > Bluetooth, find the device you want to disable the twinning, tap , and then we forget this device.

  When you forget this device on your iPhone, iPad or iPod touch, this accessory is removed from the list of available Bluetooth devices.

  Make sure that your iPhone does not seek to call itself after it is disconnected, and then you can pair the iPhone and the car again:
  

  Pair your device with a Bluetooth accessory

  1. On your iOS device, tap on settings > Bluetooth. Stay on the screen until you complete the steps to pair your accessory.
  2. Place your accessory in discovery mode and wait until it appears on your iOS device. If you don't see it, or don't know how to make it discoverable, check the instructions that came with your accessory or contact the manufacturer.
  3. Tap your accessory pair. You will have to perhaps enter the CONFIDENTIAL code or password. If you do not know what your PIN code or word password, see the documentation for your accessory.

  When pairing is completed, you can use the Bluetooth accessory with your device. You can pair several Bluetooth accessories with your iOS device. Just follow the steps above to pair additional accessories.

  Thank you for using communities of Apple Support, cheers!

• Re: Satellite L300D - unable to connect via WiFi network

  Any help please? -I just L300D with Vista professional.
  Crossed troubleshooting but still unable to connect via the wireless network - no probs with other laptops.

  When going through "Toshiba assist" message arrives "this wireless network device is disabled.

  Please activate the device"- button wireless is activated with light yellow?

  any ideas?

  Are you sure that the laptop wireless switch is on?
  Look in the Device Manager. Maybe it's the wireless network card disabled. So activate it.

  Also try an update of the WLAN driver. You can find it on the Toshiba site:
  http://forums.computers.Toshiba-Europe.com

• Satellite L350 - unable to connect via a WLAN

  Hello
  New to this lark of thread

  You just bought a L350
  I have managed to connect to the Internet via a cable, but am unable to connect via wifi.
  WiFi is turned on. He finds my BT Home Hub but when I connect, it just says: it's impossible.

  Help, please

  Have you checked the Wifi device in Device Manager? The driver is properly installed?

  Try turning off your firewall, which could block the Wifi connection.

  Also try to press Fn + F9 to toggle wireless devices

• Try to synchronize a mobile laptop and it connects via bluetooth, but will not be synchronized

  try to synchronize a mobile laptop and it connects via bluetooth but will not synchronize what I am doing wrong

   
  Moved from feedback
  Original title: device

  "You run a form any of sync on the PC software, usually supplied with the ' phone or available for download on the ' phone manufacturers site.

  As you do not tell us that "phone and helps OS it runs there is little more we can give."

• connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  Best regards: John

  Hello

  -Do you have Bluetooth devices internal or external connected to the laptop?
  -Have you checked if all the Bluetooth drivers on two laptops are very well installed?
  -This work was fine before? If so, what are the hardware/software changes made on the computer before this problem started?
  -Is a problem only when these 2 laptops connecting or is that when you try to connect these 2 laptops at any other laptop too?

  I suggest you to go through these below items that could help you to fix this problem.

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices
  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this information helps you!

• Internet Explorer message: "unable to connect via the parameter to wide band".

  When I try to connect to Internet Explorer, I get a message saying unable to connect via the parameter to broadband. We have AT & T Wi - Fi that I seem to be the only one of 4 people in our House, that has a connection problem. We all have different types of computers, some run Windows 7 and others are Vista. Don't no if this material. I preformed a few tests without results of troubleshooting. Help, please

  [Original title: programs network networking Internet site Internet website URL website network]

  Hello

  ·         What is the exact error message you get when connecting to internet?

  ·         Which is the browser you use to access the internet?

  ·         You are able to use other internet applications such as messenger etc?

  I suggest you follow the steps below:

  Method 1:

  Follow the steps in the link below to connect to the internet in the link below:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Method 2:

  Follow the steps outlined in the article below if you can not connect to internet:

  http://support.Microsoft.com/kb/956196

  Method 3:

  If the steps above do not follow the steps in the link below for network connection problems in windows:

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  I hope this helps.

• Satellite L755D - Connect via Bluetooth not accepted AirTrack speakers?

  I try to connect my soundbar via Bluetooth. Soundbar detects my PC.
  I use the Bluetooth Wizard, and it also detects my soundbar, AirTrack E550.

  But when installing speakers, I get a message that my device is not accepted?
  Can someone help me with this problem?

  Bluethhoth Stack for Windows by Toshiba, version v8.00.06 (T) is installed.

  My PC: Satellite L755D

  Hello

  I think that must be the PIN code while trying to connect the two devices.
  If you will be asked to go through the code, you must put 0000 (4 x zero)
  You can only connect a BT (portable) device that supports the A2DP (AV) features.

• Satellite P300-133 - how to use the internet connection via BlueTooth

  Hello

  I finally solve my problem with the synchronization via bluetooth between my P300-133 and my [HTC | http://www.htc.com/europe/product.aspx?id=15674] with Windows Mobile 5 - with step by step instructions of Toshiba.

  But I don't know how to use the Internet via BT, I tried many ways, one of them was to create a PAN with P300 as server - correctly connected HTC to P300, but it seams I can share internet with P300 as a gateway. And I want to do the opposite - get internet from my mobile to the computer (while she is away from all the cables). I'm not sure this PAN in the right way...

  The question of the other and less important is to be able to share that connection with your laptop via bluetooth - I guess that this must be done through Pan

  Thanks for any help.

  Bartek

  You found a solution to this?

• Laptop &: how to share internet connection via Bluetooth?

  Hello

  I recently bought a laptop and I can't find how to share internet via bluetooth from my desktop pc. I can connect using the personal area network (PAN), but I don't know how to send the internet. everything that I said try as much as all have failed.

  I do not know this questions been asked a lot, then I'm sorry to ask again)
  could someone tell me step by step installation?

  (Thank you, it is appreciated)

  Hello

  It s takes longer to describe the complete installation of the use of BT for internet sharing.
  I found this site with a statement of installation for Windows 2000.
  The dialog boxes for Windows XP may be a little different, but the configuration will be the same.

  http://www.Geekzone.co.nz/content.asp?contentid=1285
  However, check it out. It s useful.

• Unable to connect via nfs, ftp only

  My network has two devices NAs - a NetGear ReadyNAS 102 (2x1To) and an OXFORD (NAs French device, 1x500GB). I'm trying to set up a weekly backup of critical files to the ReadyNAS to the GLOBAL system.

  On the OXFORD ring road, I activated CIFS, NFS and FTP. Using FTP, I am able to connect to the NAS without problems. However, I couldn't finish a single backup via FTP. The last attempt continued for 3 days and then failed. When I try to connect to the same part of the OXFORD box by using nfs, I get the error "unable to connect to the host.

  Are there steps I can perform to solve this problem?

  Thank you

  bsmerbeck wrote:

  I think that we could be closer to our cause of errors. I tried this command and received this error message:

  "showmount: failed to get address for.

  Maybe try this variant:

  showmount e 127.0.0.1

• I can't the music playing in my car when I have iPod touch connected via Bluetooth. I get message says: CONNECT to THE WI FI TO PLAY music. Why not play via Bluetooth only?

  Hello..

  I'm playing my iPod touch in my car through Bluetooth. The audio system in my car recognizes the iPod via Bluetooth. but, I can't seem to play the music. I get a message on the iPod that reads to CONNECT to WI - FI TO PLAY MUSIC. There is of course no WIFI signal in my car, just Bluetooth. Why can't the iPod to play through my audio system via the Bluetooth connection? Why he keep insisting that I need to connect to the wi FI? How to play via a Bluetooth connection? The Bluetooth is in the car & on the iPod. It is synchronized to the top.

  Thank you in advance for help.

  Hi, Mishkapatches.

  Please visit Apple support communities.

  It sounds like you may be a subscriber of Apple music and media has not been made available to listen to offline.  I suggest you take a look at the article below.  This will guide you through the process of downloading music music Apple directly on the device so that you can listen to music when not connected to the internet.

  Add music catalog to Apple's music to your library on your iPhone, iPad, iPod touch, Mac or PC

  See you soon

• Samsung galaxy is not - N7000 GT - cannot connect via bluetooth

  I can't connect my mobile Samsung Galaxy Note - N7000 GT via bluetooth.

  Hi HeshamSallam,

  1. what operating system is installed on the computer?

  2. you receive an error message when you connect to the device via Bluetooth?

  Follow the suggestions below for a possible solution:

  Step 1: Follow the steps in the article and check.

  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

   

  Step 2: You can search for Bluetooth device settings.

  Change settings for a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

   

  You can also see the following articles for more information on the connection of Bluetooth devices:

  Change settings for a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

   

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

   

  Add a Bluetooth device or other wireless or network device: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Reply with more information about the issue so that we can help you better.

• Unable to connect Microsoft Bluetooth Mobile Keyboard 6000 to my PC laptop Toshiba M65-S8092

  I could not connect Microsoft Bluetooth Mobile Keyboard 6000 to my M65-S8092 PC Toshiba laptop.  The labtop does not recognize the keyboard or numeric keypad.  When the keyboard or pad is turned on initially a light solid green lights and the light flashes red and green.

  Hello

  1. are you able to connect other devices via Bluetooth from your computer?

  2. don't you make changes to the computer until the problem occurred?

  3. it connects to another Windows XP computer?

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Troubleshooting Wireless and Bluetooth problems.  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/keyboard/wireless-Bluetooth

  Method 3: If it's Windows XP Service Pack 2 then I suggest you to see link below and check if it helps.

  How to troubleshoot Bluetooth detection and connectivity problems in Windows XP Service Pack 2: http://support.microsoft.com/kb/883258

  For your reference: http://support.Microsoft.com/kb/952818

  Hope this information is useful.