Typing cannot follow

Similar Questions

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• Cursor autour breaks and clicks in the Middle words or a page, when you type, selects areas of the document when writing and by typing the following key, all this goes away.

  I have Microsoft Windows Vista Home premium, Version 6.0 (Build 6002: Service Pack 2), was Norton Internet Security. Cursor autour breaks and clicks in the Middle words or a page, when you type, selects areas of the document when writing and by typing the following key, all this goes away. Perhaps because of my attempts to resolve this issue, some of my PC system has had problems, it became unstable, I've had several accidents that I got Norton 360, but it don't did me not the solution and stops working, I re installed Norton Internet Security. Please give some answers and advice on how to solve this problem, thank you.

  Hello

  You use a desktop or laptop computer?

  Is the mouse a mouse wired or wireless?

  What is the brand and model of the computer and the mouse?

  If you are using a laptop, I suggest to change the sensitivity of the mouse pad.

  If this is a wireless mouse it might be interference from another close to the mouse. Make sure that speech recognition is not enabled.

• cannot follow the links-error message said "this operation has been cancelled due to restrictions in effect on this computer"

  cannot follow the links-error message said "this operation has been cancelled due to restrictions in effect on this computer

  Hello

  1 are. what links you referring?
  2 are. links to which application you referring?
  3. what browser do you use to open the links?

  Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.

  http://support.Microsoft.com/kb/555375

• Keyboard cannot follow. Making misspellings all the time.

  Hi, im having trouble with typing. My keyboard seems to not be able to follow along with me. Now, I can't type that fast, but it seems I have to type really slow for the letters out, and even in this case do not come i type letters. I always keep backspacing to correct. It is not no matter what specific keys, they all do. I tried to clean with air boxes but doesn't help at all. It's a HP Pavilion laptop, on the back, it says Tx1000 and also REPLACEMENT-Q22C, do not know if not more is a model number. Its has a Turon64x2 AMD and windows vista, its about two years old. I have never had any problems with it other than the problem of typing and it has been for about a year already. Now, it does on applications, that is to say, Word, anywhere that I can type it does. Someone please help.

  It took me 10 minutes to type up to when he should take me 2 minutes... just an example of how it's bring me. Thanks in advance

  Check the behavior in safe mode, with a clean boot, or with adifferent user account.  Try to use the technique of the boot in order to identify some software that can contribute to the behavior you are reporting.

• Cannot follow the directions to learn how to fix a corrupt exactly user profile.

  When I followed the following instructions;

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I can do everything through the seven step but when I do extra files that would appear under the folders do not appear.  To get these files to appear I have to open windows explore and go to tools > folder options > view and uncheck "Hide protected files of the operating system (recommended).

  I can then follow the seven-eleven steps and everything seems to work OK.  But it leaves me curious to know what may be wrong.

  Any ideas?

  You say that you have completed all the steps until step 7...

  Step 5 tells you to 'clear the Hide protected operating system files check box... "- so you should have already passed this check box in step 5 and I don't understand why you have to clear the box still in step 7 to see the files.

  If you are copy and paste all the files except ntuser.dat, ntuser.dat.log and ntuser.ini by following the instructions in step 7, then you do it right.

  HTH,

  JW

• Cannot follow the links Google search result from this morning

  Kubuntu 11.10
  10 Firefox

  Windows 7
  Firefox 7.0.1

  Google has made a change that makes the object, you must enable cookies and make sure they are not blocked

  (From discussion/forums/contributors/708153 )

   Sometime last night, Google updated its search results page. We are seeing some reports that search results when clicked take you to a blank interstitial page rather than the final result.
  

  The issue is that if you don't have cookies enabled or working (blocked by extensions/privacy settings), the links don't work. The only workaround is to enable cookies, use a different search engine or use Chrome (which somehow works even with cookies disabled).
  

  The bug is bug 725634. I'm posting here to let you all know that we're working with Google on this and it should hopefully be resolved shortly.
  

  Update
  Google expect to have this problem in a few hours.

• BlackBerry, Blackberry Q5 Q5: Verbal announcement of what is on the screen, can not close the applications by typing, cannot access settings

  Hello

  This mornign I had a surprise. For some reason the phone seems to freeze when I open facebook. I thought who would be corrected by restarting, but facebook would be available temporarily and then it would freeze. The same thing happened with everything I opened on the Q5.

  In the end, the phone seems to be put in place for people with a visual impairment. Whenever I touch the screen, and then even when I want to reconnect, there would be verbal instructions and descriptions of what is on the screen. For example, I received the instruction to slide up to open a session, and then whenever I touched one of minimized applications the phone would be such which program it is and what number it is out of the apps on screen.

  Is there a shortcut on how to disable this setting?

  Or what I can do to regain access?

  Thank you

  Hello

  From what you describe, it seems that somehow you have turned on the functions of "accessibility". Go to settings > accessibility and check all those involved to be sure of anything you want.

  Good luck!

• Cannot install DirectX on Windows 8?

  When I install DirectX on Windows 8, the following message keeps appearing:

  "A necessary .cab file for installation cannot be trusted. Please check the Cryptographic Services are enabled and the file is valid. »

  I followed the instructions in this thread

  But it still does not work. I typed the following command:

  regsvr32 /u softpub.dll
  regsvr32 /u wintrust.dll
  regsvr32 /u initpki.dll
  regsvr32 /u dssenh.dll
  regsvr32 /u rsaenh.dll
  regsvr32 /u gpkcsp.dll
  regsvr32 /u sccbase.dll
  regsvr32 /u slbcsp.dll
  regsvr32 /u mssip32.dll
  regsvr32 /u cryptdlg.dll

  and it seems that some loading modules.

  These messages keep coming:

  The module 'initpki.dll' failed to load.

  Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. DLL files.

  The specified module could not be found.

  The module "gpkcsp.dll" Could not load the.

  Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. DLL files.

  The specified module could not be found.

  The "sccbase.dll" failed to load module.

  Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. DLL files.

  The specified module could not be found.

  The "slbcsp.dll" failed to load module.

  Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. DLL files.

  The specified module could not be found.

  How can I make it work? I need to install these. DLL files? Please tell me how to fix them! D:

  I even did a SFC scan, but it says:

  "Windows resource protection found corrupt files but was unable to solve some of them."

  Hello

  Thank you for the update on the issue.

  Yes, you are right that if SFC scan find damaged files but could not repair so that there could be a chance that some system files are corrupt. So, I suggest you run the DISM commands and then see if it helps you to fix the corruption.

  Maintenance of the images of deployment and management (DISM) installs, uninstalls, configures, and updates features and CBS packages in Standard Windows 8 Embedded images (standard 8) offline and offline Windows Preinstallation Environment (Windows PE) 4.0 images. The commands and options that are available for servicing an image depending on whether the image is offline or online. All controls operate on a standard 8 offline image. Subsets of commands are available for the maintenance of an operating system.

  I suggest you run the commands in elevated command prompt and control below if this can help.

  • Press Windows key and X at the same time.
  • Choose line (Admin) command on the shortcut menu.
  • In the command prompt, type the following command and press ENTER:

  DISM / Online/Cleanup-Image /ScanHealth.

  This command is used to check if an image is repairable. Scan the image to check corruption. This operation may take several minutes.

  DISM / Online/Cleanup-Image /RestoreHealth

  This command is used to repair an image.

  Keep us updated on the issue after running DISM commands.

• Cannot write the french accents by pressing the key

  I can't french accents anyway by pressing the all longer.what to do. Thank you

  Try to reset the function by typing the following command in the Terminal, followed by the return key or enter.

  write g ApplePressAndHoldEnabled - bool true

  Restart and try again.

  

• Clean install of Windows 10, GeForce GTX 860 M, cannot launch games. + Sun

  
  

  UPDATE 4 SOLUTION:

  In some sort everything started working on its own, maybe there was some kind of download on the background of windows and before formatting windows 8 return, I decided to restart windows several times and everything slipped.

  It's my strange solution... At least his work

  So I suggest you to do every possible update on windows and 10 do a few reboots, there are some updates that we cannot follow probably, so let them settle and reboot the pc.

• laser jet pro printer MFP M127fn newly installed cannot connect to the wireless network

  I just bought the printer [all in one].  I initially put in place by using the CD that came with it and a USB cable.  Then downloaded the update from Apple software, following the instructions, but cannot follow the instructions online.  I can't find the menu on Control Panel wireless.  It is not upward under Network Configuration.

  Hello

  The HP Laserjet M127fn is not a wireless printer (model M127fw however provide wireless capabilities), it supports only wired network connection, as you can find below in the connectivity section:

  http://support.HP.com/us-en/document/c03898081

  Jean-François

• BlackBerry smartphones can not follow the user guide, that things do not exist!

  I had a problem with email sent from my account Gmail appears on my BB.  I found a thread to solve the problem, but cannot follow the signs, because my BB does not display some of the steps as in step 2 of this thread:

  If I opened my email and then options, I list are:

  General options

  E-mail settings

  Email reconciliation

  Spell check

  If I go to the user's guide, I read the following:

  Activate a filter of e-mail messages

  1. in a message list, press the Menu key.

  2. click on Options. 3. Click

  Filters e-mail.

  4. Select the check box beside an email message filter.

  Again - I don't have that options above, e-mail FILTERS is not one of them.

  I have download 4.6, but am careful 4.7 as I've heard there are problems with it.  Any suggestions?

  Thank you

  Sorry, new link added.

  The key is that you must log into your BIS account and change the filter by the instructions of my new link, NOT the device itself.

• I can't activate my Windows 7. Error "the product key you entered cannot be used to activate Windows on this computer."

  I have an original Win7 Home Basic but when I try to activate it.
  Somethings say that "the product key you typed cannot be used to activate Windows on this computer".
  It is certainly stupid
  FYI, even I don't know what is it
  X 15-53744

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I may have launched a trial version free of ps three times, is anyway to follow my downloads?

  I may have launched a trial version free of ps three times, is anyway to follow my downloads?

  Didn't know the eta of the download so I hit refresh on the page hoping to see a message like "Hey, no need we already download" idk... pop up appeared again so I pressed start an application once more... so just for the hell of it I refreshed and launched a third time. is it possible to see the progress or stop it?

  Did you follow the steps to download:

  Download Adobe Creative cloud apps | Free trial of Adobe Creative Cloud

  OR

  Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

  Please check, we cannot follow the trial download.

  Concerning

  Stéphane