U2413 problem of calibration double monitor and a Question

Similar Questions

• Calibration of monitor and printer

  My monitor and my printers need calibration. There are differences between such images that displayed on the display of the camera and the monitor and the monitor and printers. I seeks to determine the Colormunki and Spyder Studio solutions, but cannot find any current advice on the merits of each of these solutions. Does anyone have current experience? My system includes a Nikon D7000, an Acer monitor and printers Canon Pro9000 Mark II, MG6200, and MX920.

  Thanks for any thoughts.

  Reduce the number of variables. First of all the scorn the LCD of the camera, which is not yet remotely reliable as a guide to anything. And it could be that the display is where you should really spend your money first. What model? At the very least, there should be a panel IPS-type; If it's a slab TN, he has narrow angles and poor color accuracy in general. A good photographic use monitor will be around $500 and up, depending on the size.

  Anyway: calibrate the screen and set the objectives to give a Visual match to the printed output. Set the temperature and the luminance of the white point so white monitor is a match Visual white paper under your specific display requirements. Then set point range black/contrast, if software has this option. Glossy paper is normally in the order of 250: 1.

  Accurate color reproduction is actually not as important but to rethink the General brightness and contrast. Neutral color balance will be the same as the white point chromaticity and the display profile allows you to compensate for the specific screen response and irregularities. These things will be put in place by themselves. The critical point is to get the targeting for your work environment.

  Canon pro9000 resembles a great printer, use it as a guide - but make sure you have the correct printer profiles loaded, for the paper tray you are using. I don't bother with calibration of printer, get the first right screen calibration.

  That said, between the ColorMunki Photo and the studio of Spyder, I'd go for the first, simply because x-rite make sensors more reliable and consistent.

• HP 2000: Double monitor and identify as #1 and 2

  I have a HP 2000, it has a HDMI, VGA and 3 USB ports (1 is already in use). My graphics card is a radeon HD 8400 AMD / R3 series.  My question is can I connect a second monitor and use my laptop screen as a principal with the external display as a secondary where I can move documents or other pages of the second screen, so he was working on a screen. If the answer is Yes... How then?  If I connect the second monitor with a HDMI or USB cable to it automatically dectet the second monitor.   Just for clarification... I DON'T WANT THE SECOND MONITOR FOR JUST the MIRROR display my laptop.

  Thank you

  Yes, you can have the two screens as extended with your laptop desktop. Wheter you are using a VGA monitor o USB HDMI it works the way you want. When the monitor is connected Windows will detect the two screens and choose the cell phone as a primary and power monitor in the secondary office, extended.

• monitor and TV resolution problem

  I have a computer connected to a monitor and a TV, using the configuration double monitor.  The problem I have is that when I put in place the TV and computer screen to display the same resolution, the icons on the computer screen are moving to a point approximately one inch above the bottom of the screen of the monitor.

  I can't have the icons to stay closer to the bottom of the screen, as they do on my other computer that has two computer screens.

  No idea what I can do about it?

  Have you tried setting the screen of the computer at its optimal resolution and the same thing with the TV? Chances are they'll be different. Check your TV manufacturers site to see what is best for your TV.

  I hope this helps.

• Problem in typing punctuation - Inverted double comma (",") and single (')

  I use Windows 7. If I want to type punctuation - Inverted double comma (",") and simple signs ('), I have to press twice the key of the keyboard, and then remove one by using the BACKSPACE key. When you press the key on the keypad only once, nothing does the screen and when it is pressed for the second time, the brand appears twice and that is why it must be deleted. This occurs when the text inputing on any program where can be entered text such as MS Word, IE Explorer, Firefox and so on and even on the screen where this question is typed on the Web Microsoft Answers site. Please help me.

  This fixed it for me: I got rid of all keyboards except to the United States one.

  http://support.Microsoft.com/kb/306560/en-us

  See also: http://superuser.com/questions/122625/weird-problem-in-windows-xp-apostrophes-and-double-quotes-don ' t-show-up - to the-t

• Two monitors can be connected and function as a double monitors?

  Original title:

  Two monitors

  I have a Dell E2211Hb monitor and a Dell E176FPc monitor. Can they somehow be connected and work as a double monitor?

  If you have a videocard head double, Yes. Look at the back of your PC. Most new computers have a video port VGA and DMI.

  Connect each monitor using the appropriate wiring. Restart Windows, right click on a clear part of the desktop display and select Properties.

  Setting up dual monitors...

  http://www.Dummies.com/how-to/content/how-to-set-up-multiple-monitors-with-Windows-7.html

• After effects CC problems encoding (tilted the view and doubled the by-Side sequence)

  Although starting at the Adobe Creative Cloud space, there is some awareness of the main functions of the system, as well as a few additional details. However, a problem occurred on the encoding and export project Adobe after effects (AE) to Adobe Media Encoder (SOUL) such as the 2D plane (or rather the version preview in AE is flat and not transformed) becomes 3D so that the sequence becomes tilted and lined with a line between clips of same in preview rendering within the SOUL. The system currently used is a MacBook Air, and the Adobe programs were recently installed from 2016. Such a question has never become eminent or circumstantial to anyone on the forum? If there are other details, please ask by responding to this post. Thank you for your time and effort!

  This is an image depicting the situation previously described:

  

  First check the file in another player software. If this is a real problem, we need to know the exact encoding parameters. Such behavior usually indicates an incompatible CoDec which does not have the custom of handloe correctly resolution settings...

  Mylenium

• Blue screen of death when double monitoring

  Whenever I have connect a secondary monitor cable HD15 and go to the resolution of the screen (control Panel\Appearance and Personalization\Display\Screen resolution) and click on detect, the computer crashes and blue screen of death. After restarting the computer, everything works well until he falls asleep, and then when I try to wake him up, just a black screen appears on both monitors. What happens here?
  I only have these problems when double monitoring. Also the first monitor is connected using HDMI. My system is i7 2.8 GHz quad core with 8 GB ram and GeForce GTX 660 graphics card. Thank you

  You see the problem discussed in the link below?

  https://esports.GeForce.com/forums/topic/672846/GeForce-experience/nvstreamsvc-exe-memory-leak/

  You would seem to have missed something in Autoruns that requires deletion:
  + ". EsetTrialReset"in"Trial Reset"" "" file not found: C:\Program ESET ESET Smart Security\Shahed.exe/s ««»

  I have proposed on March 17 that you uninstall, then reinstall Pinnacle Game Profiler. Did you do it?

  Send a copy of your last dump file in a shared file (excluding the older one month) to your OneDrive with a link here

• Connection problem with the second monitor, macbook pro 2014, OSX El Capitan

  There are a few threads describing problems with two monitors, but I have not found a match.

  I like for the operating system ask login password once the lid is closed, no matter how much time has passed (even for a moment). Also, I work with a dual monitor. However, when my macbook is plugged into the monitor and I close the lid, the macbook don't disconnect but spends just primary monitors. Understand that this could be a feature and not a bug, I tried to unplug the monitor before closing the lid. But the OS seems not to realize that the monitor has been disconnected, and when I close the lid he didn't ask me for my password once that I reopen it. Does it also if I wait a bit (i.e. one minute) after disconnecting the monitor, but not if I wait a while (or 15 minutes), well that I've not enough highlighted how long is necessary so that it starts locking on my closing the lid. He does it with different monitors, so I doubt that it depends on the particular monitor. In both cases, I used the HDMI port.

  This is quite annoying, because I need to be able to disconnect safely in a short period of time, and I was not able to find a workaround on mine. Everyone knows this? Thank you for any help or advice.

  Emilio

  You might have invoked indevrtantly this obscure 'functionality' of MacOS. Read the article and see if you do these things:

  Use your Mac laptop to view closed with an external display - Apple Support

  .

• Tecra S1 - display problem, even on external monitor

  One day I was using the laptop, surfing the net normally, everything was fine and suddenly the screen went bad... (photo below). I tried using an external monitor and still the same, so I'm sure that my monitor is fine and it is probably a problem of display card?
  I tried to update my display card driver and no luck, so I decided to use the recovery CD to restore the system and no luck once again.

  Here is a screenshot after the system restore... y at - there a way to fix this without taking it to a service center?
  Thank you
  Link: [http://i130.photobucket.com/albums/p262/ctb205/mon.jpg]

  Hi borist,

  It s really great that you could post a picture of your problem. Thank you!
  In addition, you have already tried a lot of as the recovery facility and an external monitor.

  Unfortunately, it seems to be a hardware malfunction of graphics card. :(

  This means that you will need to swap the motherboard because the graphics card is fixed on it. Motherboard is a party quite expensive and Tecra S1 is old notebook then maybe you can get a second hand or laptop motherboard on eBay and swap it out.

  Good luck! :)

• Problems with listbox - double click

  Hello community,

  I'm doing a program in which I'm building a dialog box by using the tab control and the user can double-click on one of the folders/files and this file must be read in the program and graphics need to be plotted.

  To do this, I use a Boolean control, if I activate it, I call a tab control with a ListBox in which I use the function of list folder to view all the files/folders in the directory I put. I was able to get the double click event to work and give me the correct path to play the file using the function "read from the spreadsheet. The part of the plot is now over, but I have problems when I try to run the program.

  The program was supposed to read the name of the cell that the user double click and only after that he reads the name I have change for a path access and then read. Which under its weight reads the file ListBox begins selected, as if I run the program once and double click on any file in the next run it will show the last selected file. The problem is that I am creating a node to invoke to reset the list box, but when I do this the program opens a dialog box to select the file to read.

  So what I need is to figure out how to do the program only runs after the user to double-click a cell, should not read the file already selected in previous executions. But I don't know what to do. Can you help me please?

  Thank you for your attention

  Lucas

  Faquim wrote:

  Well, I'm pretty new to Labview, barely a month to use it. As English is not my first language, so I do not understand some of the terms you used, like "cut upwards" or "conditions of competition" or how to clear indicators in the beginning of the program?

  ...

  The stacked sequence is to make actions happen in that order, that's how I learned. Local variables are also here because I don't know how to use the same variable twice or several times during a VI. Well, I'm still young enough for that.

  Well, you break the data flow by copying in indicators invisible only to re-read a nanosecond later. Indicators are for the user, not to store data. If you eliminate the structure of the sequence, you can wire things together directly. Data flow automatically determines the exact execution order. No required sequence.

  Faquim wrote:

  The stacked sequence is to make actions happen in that order, that's how I learned. Local variables are also here because I don't know how to use the same variable twice or several times during a VI. Well, I'm still young enough for that.

  indicators and variable local are NOT the 'variables', they are user interface elements.

  Joined a quick attempt at a code cleanup.

  All your operations of chain cable paths are still quite fragile. You should really exploited to the way datatypes. There are probably a few broken things because I can't test. However, it should give you some ideas.

• Problems with the external monitor W540 connection

  Hi, maybe someone can help me. I'm trying to connect a W540 (no external dock) to an external monitor Dell.

  I tried with two monitors, but none work.

  Connected via VGA port on the side of the W540

  (1) connected monitor and clogged up the resolution of the screen on laptop (lines icons tiny, black on each side of the screen). External monitor works fine. When unplugged, it went back to the previous screen resolution.

  (2) laptop registered resolution and icon size of the screen as a profile.

  (3) external monitor connected right click options graphics Intel, insured was custom display, main display plus external monitor, then had to go in a re - click on the name of the saved profile.

  (4) this worked ok until the next day, when turned on laptop and a blue screen. Managed to get this back hard by restarting and completed the steps in N3

  (5) cannot get the Nvidia Control Panel to display anything else than the 3D options, even if it make the default value (instead of the Intel graphic card)

  Can anyone offer some so that I can connect an external monitor without having to go through all this hassle every time? Why this affects the laptop so bad (and also, it runs very slowly after that)

  Running Windows 8 (but with the interface of Windows 7)

  Thank you very much

  Thank you. A quick update, I contacted Lenovo, and they sent the updated bios drivers. I also uninstalled some software Canon MP Navigator and Lenovo EMC Discovery (http://support.lenovo.com/us/en/documents/ht081844?tabName=Solutions). One or all of them seem to have solved the problem, including the slow start.

• I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online

  I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online

  Hello

  1. what operating system is installed on the computer?
  2. what web browser are you using to play the games online?
  3. don't you make changes to the computer before the show?

  If you use Internet Explorer, then I suggest you to try the steps from the following link:

  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246
  
  Additional information:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Solve game problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-game-problems

  The problems of the game performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problems

  Troubleshoot display with Microsoft games
  http://support.Microsoft.com/kb/263039

• I can stream movies on my PC using the desktop PC monitor. But when I unplug the monitor and use a PC to TV HDMI cable I get the video but the audio now

  . Video streaming

  I can stream movies on my PC using the desktop PC monitor. But when I unplug the monitor and use a PC to TV HDMI cable I get the video but the audio now... Suggestions?

  Thanks for the file INF. I ck'ed for driver updates and I have the latest drivers installed.  I got the sound working on the TV by hanging the audio output of the PC to the entrance of the TV with the HDMI cable in place for video. It's the simplest solution to this problem, so I took it.

  By the way, I have a Dell 620 with windows 7.

• Monitor and system used "wake up" mode ensures

  I tell my story so that others may not feel as if they were alone in their perdicament. My story starts like this:

  I bought the m9520f and and w2408h last Saturday and have been enjoying the PC immensely. I really like HP and wouldn't not consider purchasing another manufacturer - even with the troubles, I'm going to wear. Everything worked well until Sunday night, when I put the system into "sleep" mode and returns an hour later. I had put the system into "sleep" before but was returned to him several minutes later. But this time after leaving the PC in "sleep" for an hour, the system will not turn back. The lights on the PC itself would come on (from the green 'sleep' to the 'blue'), but the monitor would refuse to wake up. I called support and even they could not understand it. We have tried to unplug the pc and all its ropes, but nothing worked. I hooked up the monitor to my other pc, and it worked well, so I knew there was nothing wrong with the monitor. Earlier Saturday the PC would not recognize Monitor driver then maybe had something to do with it. Hmmm. When I disconect the PC monitor would come and it lights on the keyboard would be as well. When I plugged the monitor of the PC turns on but keyboard lights wouldn't. Strange. The monitor would immediately switch to "standby" mode as soon as I plugged the HDMI or VGA - in fact just before he would monitor OSD would be inidcate that niether the HDMI or VGA were connected (which they were physically). So I knew that the monitor was not to recognize the conection. Communication between the monitor and the PC must have been the cause. After about 45 times to turn on and off Alternatively the monitor and the PC, the monitor has FINALLY acknowledged that there was a link and my PC on - WHEWWW. I was afraid that I would have to discuss with the people at Circuit City for an Exchange. I still don't know what happened, but all I know is that I will NEVER put this monitor or PC in sleep in the future. Here are the symptoms that I lived in case someone else there is in the same perdicament. It seems to me that this can be cured with a software update - but I'm not smart enough to Koe for sure:

  Tip #1: The PC would not recognize Monitor driver

  Tip #2: This happened after leaving the monitor and the PC in 'sleep' for more than 30 minutes

  Tip #3: The PC lights (clear blue power, stable, flashing green light on the back and the dvd player opens) but the rest of the monitor to sleep

  Tip #4: The monitor refuses to acknowledge that it is "connected".

  CUE #5: The PC "blockages" accordingly and refuses to switch (kind of caught between being on and "sleepy")

  Tip #6: When the PC finally trun on the driver and the software supplied with the monitor that he would not recognize Saturday had risen from PC (hmm - I chose to not reinstall)

  My recommendation: do NOT try to install the driver provided with your monitor and DO NOT put your system into "sleep" for more than 15 minutes.

  My system: Pavilion Elite m9520f with monitor w2408h 24 inches.

  LAST UPDATED:

  After several weeks with the computer, I found the solution. I did through trial an error. First of all, let me say that I don't have the option of returning the PC to the retailer, because it was Circuit City and they had to stop their activities - so I couldn't do that. Here is the solution for those of you are having problems with your PC do not 'wake up' sleep: (Please note that some documents below may be repetative and you could read what follows before in my previous updates - I just wat to summarize below for some people)

  1) to update drivers (ALL)

  (2) update the BIOS (very Important!) on the site of HP

  (3) HP has a problem with USB devices (external drives, USB mouse, anything with USB and Yes, that includes your monitor). Which MAY have something to do with the "bus controller" driver who refuses to this day to be installed on the 'updates '. I was not able to install this darn update, so I gave up. I know that many of you have had trouble with that as well so I'll leave for another topic on the forum of "solve". All I have now is that I've resigned myself to the fact that it will never be installed and I'm fine with it. Anyway, my main concern was the problem of "sleep". Getting back to what I was saying, the HP has a problem with the USB devices. In other words, all USB DEVICES MUST BE REMOVED before you go into sleep - if you do not, then the system will NOT "wake up". What I've learned, is to remove all USB devices before entering the sleep and my system will go to sleep and wake up without problems - for me, it was just a matter of having disconnected and reconnected once the system was awake. Of course, those with a USB mouse, I recommend that you get a mouse not USB. Fortunately also my HP w2408h monitor is connected through a HDMI cable so I don't have the problem of having to disconnect and reconnect it. The manual of the suggested w2408h connect it by HDMI AND USB but only connect it via HDMI and it works perfectly for me - DO NOT CONNECT THE USB cable on the screen because then you will have the problem of sleep.

  Resolved solution!

  (now, if I can get my gosh darn controller BUS to install and my blu - ray to panic game then that would be nice - arghhhhhhh!)

  Hope my experience helped the people there!

  Message edited by m9520fUSER on 02/12/2009 20:35