U330 problem of update of the Bios (7CCN35WW)

Similar Questions

• Satellite L750-201 - problem with update of the BIOS - preparation for Win 8

  I have a L750-201 and is eligible for Windows 8. Currently Windows 7.
  I thought that I would update to the BIOS (latest version 2.6) in the latest version (3.6), which has some relevant changes to Windows 8, I understand.

  I have downloaded the BIOS update file and run. I had several options. One of them was to make the update of Windows, and another was to create a boot CD to do at STARTUP.
  I created the CD and rebooted the machine with it. Everything seemed fine, but when the time came to Flash the bios I got the message about the battery must be greater than 10% and the power adapter is connected. If the BIOS update has refused to start.

  The problem is the battery was 100% or almost that I had just fully charged it. The power adapter is and powered. So whence the utility to update the BIOS get his info that the dough was less than 10%?
  I saw similar posts from other people, but the problem was usually that the battery was in fact less than 10% and that it was not charging. This isn't the case here.

  No matter, I thought, I can update the other sense through the windows.
  So I started the machine and took the Windows Flash utility. The system gave me the warning usual as planned and then rebooted the machine. He went directly in windows with the "Welcome" splash screen, and then stopped a few moments, then went to a black screen with just the pointer in the middle. I assumed it was something like the fairly active enjoy car light. However, after an age, nothing was. I could go back to the login screen by pressing the power button / standby machine and then turning it back on. My user has been locked, but I could shut down the computer and restart normally. Nothing serious happened. The machine starts very well and Windows does not normally, but BIOS remains unchanged.

  Anyone have any idea how to get the update of the BIOS to work? Seems I have to bypass the battery check or why BIOS thinks a battery of 100% is less than 10%.

  I have a L750-201 and is eligible for Windows 8. Currently Windows 7.
  I thought that I would update to the BIOS (latest version 2.6) in the latest version (3.6), which has some relevant changes to Windows 8, I understand.

  L750-201 satellite is part of the PSK6ME series.
  I wonder where you found the BIOS v3.60 for this device?
  The latest version of the BIOS seems to be v 2.80 - WIN

  

  So from my point of view you try update BIOS INCORRECT.

• Re: A problem of download of the updates to the BIOS for the A200-1AX

  Hello

  I try to download the update of the Bios Windos XP for A200-1AX (PSAE6} but the Toshiba Support Site keep asking me to enter a user name and password):

  "The support.toshiba - tro.de to the www.toshiba-tro.de server requires a user name and password".

  Anyone know how I can get past this problem and download this update

  Thank you

  Majed

  Please use http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_bios.jsp for updating the BIOS.

• SP59755 the update of the BIOS Version F.1BAp1 has problem with connection manager

  Laptop: HP Pavilion CTO Edition entertainment dv6t Quad - b 6, 00

  WIndows 8 Professional 64-bit

  HP connection manager: 4.1.23.1

  I received an update of the BIOS via the HP Support Assistant, which is SP59755 Version F.1BAp1

  Now, HP connection manager does not start and gives a fatal error exception. I uninstalled and reinstalled through sp54630, but it does not solve the issue.

  Any ideas out there?

  Thank you!

  There are some things you need to do before you start using the HP connection manager.

  1. first download and install Microsoft .NET Framework 3.5 SP1 from here and restart the system.

  2. download andi install HP software framework from here and restart the system.

  3. When you steps above to download and install HP Connection Manager from here.

  Note:

  This software allows to control easily all wireless devices, but it is not necessary to have it in the system.

  THX

• Username and password required for the update of the BIOS download?

  Hi guys,.

  Hoping someone could help.

  Yesterday, I received my Mini of click on Satellite and I currently support after discovering there is a certain drivers are installed before you can actually use the thing.

  While the laptop is in charge, I try to download the update of the BIOS on my laptop, so I can transfer it to my laptop once it is fully charged... I did have problems downloading tastes of the driver wifi for example but when I try to download the BIOS update opens a new and tab where Toshiba ask me a username and password? I tried to enter my username and password I used to register on this site and I also tried using another computer to download it, but without success. It is worth noting that I could partially download the file last night but then it failed to half way through download?

  Any suggestions?

  Thank you very much

  Liam

  Hi all

  I am eager to read an answer that helps on these issues...

• Need to check the update of the BIOS Portege R830 without Intel TXT

  Hello Forum,

  I have exactly the same problem as described here 2 years ago:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65519

  I need to update my BIOS, but I can't because the update of the BIOS told me that the Intel TXT is enabled.
  Unfortunately I can not disable it in my bios. Its just not selectable. The 'cursor' jumping just above him.
  I can only 'hide' which does not help.
  I have the same thing for the VT - x and VT - d setting in the BIOS. Is not selectable or editable as well.

  TPM is not active if...
  I installed after infineon and he tells me I need to enable the TPM in the bios to use. :-(

  I have a very old Bios Version 3.1 and I read in the changelog that there are a lot of TPM in v 3.4 and 3.5 related changes...

  In any case...
  A P007Dv360A_EC77V140.zip file has been transferred to 2shared.com who fixed it at the time, a user named Paolo30.
  Unfortunately, that this file has been deleted on 2shared.com

  can someone please provide this file (or an update of the bios later) which resolves this issue?
  Thanks in advance.

  Portégé R830 - 10 p belongs to the series of PT321 if you need the BIOS for Portege R830 PT321

  You can download older versions of pages driver Toshiba BIOS.
  For example: http://www.toshiba-asia.com/sg/support/drivers

  On this page of Toshiba Asia I could find all the BIOS for this Portege model.

• Satellite R830-143 - update of the BIOS does not support this operating system

  Hello

  I received a notification via Tempro that he did not have a BIOS upgrade. I downloaded the ZIP file (bios - 20120209125153.zip), extract the package (BIOS360_EC140_WIN.exe) and ran it according to the instructions.

  The package runs, give the progress bar "extract files...". ", then displays a dialogue entitled"TOSHIBA BIOS package Ver.4.1.2"that says:"this package BIOS does not support this operating system."

  I am running Windows 7 Home Premium 64 - bit on a Satellite 830R-143 with the short part No. PT32LE

  Does anyone know what is the problem?

  Thanks in advance for your help...

  Hello

  You have problems with the laptop?
  If not then why you want to do the BIOS? Just because the new BIOS is released?
  I would not change anything if my laptop is running correctly.

  However, the update of the BIOS requires the VAP (value added package).
  So remember that this PPV is installed correctly. If this isn't the case, so far.

• How I restore the update to the BIOS on Satellite U400-157?

  I recently updated a Tempro alert for update of the BIOS for the notebook. Now, I noticed that the screen blanks a few times at PC startup. It was't there before. How do I roll back the update of the BIOS to a previous one.

  I don't get to see the BIOS updated screen other cases other than the time I did the BIOS update.

  Hello

  To be honest I don't understand exactly what your problem is.
  You said:. Now, I noticed that the screen blanks a few times at PC startup.
  Does that mean exactly? Is your black screen until Windows has started?

  To be honest, I put t think the BIOS update would be the reason for which go into the BIOS (press F2) and set the default BIOS settings (F9) and save the changes (F10).

  If you want to recover the BIOS version earlier, then you will need Flash module ROM BIOS using a basic BIOS version BACK. You will find on the European driver Toshiba page only the win versions

• Satellite M60 is beginning not after the update of the BIOS through windows

  Hi all

  I was updating my bios on my M60 with the latest version of the bios and I was following the windows flashing procedure (the recommended) and it blue screened and dumped. Now, the laptop does not start, wont even post. Just a big dead brick :(

  I am pretty competent with material (I'm a software engineer), but I don't know how to reflash a laptop when this kind of thing happens. Is there a trigger bios reset on board? Can I do it myself? If I take this back to my dealer how likely they can reflash the bios in the House do? (Its a pretty major dealer of the Toronto area)

  What is a work system that I need the solution that has the smallest impact of time - cost isn't too important an issue.

  Any help would be great,

  Thanks in advance.

  Hello Kristan

  According to the description of your problem, I guess that the BIOS chip is damaged and unfortunately you can not do much alone. Please contact the Toshiba service and explain the situation. They will explain everything you need to know and you can talk with them about costs and the time they need for the repair of laptops.

  Good bye

• Satellite Pro M70-113: is the update of the Bios as of 03/06/07 supports slic tables

  Hello
  Maybe someone knows if the update of the bios for toshiba satellite pro m70-113, dated 03/06/07 supports slic tables or not?
  For vista oem installation dvd?

  Thank you...

  You will not be able to find info accurate on the BIOS and what exactly is supported or not. If you just want to install Vista on your M70 I can just say that I installed Vista Ultimate on my Satellite M70-159 (PSM71E) without any problem.

• Tecra A8-185 - the update of the BIOS under Windows 7?

  Hi again,

  I have a question how update of the BIOS under Windows 7 ultimate x 64. I downloaded the latest version of the BIOS for my laptop (Toshiba Tecra A8-185 PTA83E). After having unpacked there is only the .exe file.

  When I try to run this file, he said, that my OS is not supported. When I run it in compatibility mode (with Vista or XP), it starts the upgrade, but gives me an error: "the BIOS upgrade is failure (8). BIOS is not able on this configuration. "What should I do? I really need a new BIOS.

  Can I run it at the start of the USB key, or whatever?

  Hi offi55

  Why do you need a new BIOS? You may notice some problems with the laptop or why are you trying to update?

  However, I think that the update should only be done on the pre-installed Windows version (XP or Vista). I guess that this update n t tested and designed to update Windows 7 so I think that would be the reason why you can t.

  So to install Windows from the Toshiba Recovery disk and try to update again. It should work.

• Satellite A660 - 11 M - update of the BIOS (Winflash) crashes every time

  Hi all
  I bought an A660 - 11 M a few months ago and thought I would update the BIOS to stop nagging Tempro and see if she helped no insidious problem, I tried to correct. I downloaded the zip, extracted and ran the .exe according to the instructions on the help site. WinFlash opens, runs the first step (new load bios) but hangs on step 2 (analyze the compatibility of old and new bios). Then a message "Winflash.exe has stopped working" Windows appears.
  This happens whenever I have try, even with shut down antivirus and directly after startup with no other programs running.
  Any ideas?

  I am running Windows 7 Home Premium 64 bit, I "dualbooted" Ubuntu using wubi, but the update to the bios was not until I installed IT... Perhaps it would work better in wine? ;)
  Any help is greatly appreciated!

  To be honest the best option for you is to remove Tempro system and be happy.
  In General, if the laptop works well, you need not update BIOS.

  If you see it doesn't work properly with her don t risk. If something's not going to screw you up BIOS and kill the machine.

  In any case, let's see if someone else with the same notebook has updated the BIOS successfully.

• Impossible to update of the BIOS in Satellite A300-1ID (PSAGCE) 0 error message displayed

  Hello!

  Last weekend, I bought my laptop and I can't seem to do the update of the BIOS (from 1.30 to 1.40). I use Vista 32 Home Premium SP1 (which came preinstalled in the phone) and after downloading, unpacking and running the file provided by the TOSHIBA (PO10140M.exe) site, I get the following error message:

  C:\Users\Dado\AppData\Local\Temp\iscA516tmp\insyde flash.exe could not be run.

  I don't know it's the right file, because it was one mentioned, after completing all the fields in the search screen update BIOS.

  I don't understand what the problem is because the laptop is brand new.
  Any help would be greatly appreciated.

  Kind regards
  Ed.

  You are an administrator?

  Try right-clicking the BIOS file and select "Run as Administrator"

  Also to disable your antivirus, it can block the update of the BIOS.

• Satellite Pro A300D (PSAK1E) - update of the BIOS didn't

  Hello

  I recently tried an update of the bios after doing a clean install of windows 7 64-bit. The process is complete and the phone has rebooted. In the end, the laptop could not start and just displays a black screen.

  I tried some of the methods on the internet using recovery from the crisis on a usb key, but have had no success

  I'm not so im using the wrong combination of Fn + B etc or what but could really do with some tips

  Thanks in advance

  Hello

  I put t think there is much you can do if the BIOS update failure. Usually in this case the ROM module needs to be reflashed, but this is possible only from an authorized service provider.

  In my opinion, you should contact the guy and ask for help. I m sure they can help you solve this problem. :)

• Equium A60 crashed during the update of the Bios

  Hello, can someone tell me if this can be repaired. IHAVE an A60 Equium that crashed during the update of the BIOS, now he died nothing lights up.
  Thanks in advance

  I presume that the BIOS chip is damaged. In this case, you can do anything to make it work again. Just approved can help.

  The problem is that the repair can be quite expensive. Check it out. If selling Yes the laptop on eBay and... you know what I mean. :(