U530 inaccessible boot device

Similar Questions

• Satellite on L9W - B Mini - Inaccessible Boot Device

  Hi all

  I installed win10 and decided to do a complete reset that I gave this computer to someone else to use.
  After the reset, it does not start properly and fails with an "inaccessible boot device message".

  I created a USB boot with a version of win8.1 to install, but no touchscreen or keyboard works, so I can't go ahead with the installation.

  someone had this problem? I want to refer to toshiba that I'm tired of this device

  Thank you

  Hi, I installed Windows 10 and reset mine causing this problem, it seems Windows 10 upgrade does not work properly.

  The drivers for the keyboard and touchscreen are not standard, so are not integrated to the version 8/10 bootable usb. You can get a normal usb hub usb microphone and plug in a usb keyboard/mouse to go or if you have created a recovery drive as Toshiba tell you in the instructions it will actually contain the right key drivers.

  To boot from the recovery disc press FN N (F12) as soon as the machine is running and the Toshiba logo shows, and he will give you the option of what to start from.

• Inaccessible boot device error. New motherboard.

  De : Meigs

  I'm changing my motherboard that supports the quad core processor. However, I get an inaccessible boot device error when I try to boot with the new motherboard. I tried to boot from the installation dvd and repair, but it cannot solve the problem.

  I don't want to perform a new installation. It was easy with WinXP pro. The cd should solve the problem. But, I can just know how to do this with Windows Vista.

  Is there a way to get the registry to look for new drivers? It may not be a big problem since the installation DVD to see the drive with any action on my part.

  From: Rick Rogers

  Hi Meigs,

  Sorry, but change the motherboard in most cases it will take a reinstall. The exception would be a card replacement or one that is very closely related. XP could affect a repair installation, it is not possible in Windows Vista due to changes in the way the operating system is built on the hard drive.

  Moreover, the error message at startup is likely, given that the new motherboard uses a driver different thant previous to load the hard disk.

  --

  Good luck

  Another response of the community of Windows Vista discussion groups

• Error 0X0000007B (inaccessible boot Device) to start.

  From two days ago, about 8 or 21:00 my computer freezes whenever I clicked on any icon or attempted to open anything. Not even all that normally appears as yahoo messenger and all my other programs popped up. After this has is spent several times I went to safe mode and thought at first maybe it was something with the memory, or maybe the computer was going slowly I went into cleaning disk and deleted files. Then, I went in my add or remove programs and deleted some things more freeing space. After that happened, I tried again and still no luck. Shortly after, I went back to the security mode and attempted a full McAfee scan for viruses. It took 11-12 hours and there is no virus. Then, I went back into safe mode and tried to do a restore of the system for a few days back. I've tried twice and both times a screen popped up error after about 3 or 4 minutes for system restore. After some research I found this means cessation critical object, so I tried a startup repair, it said 0X000000F4 (0XFFFFFA8006881BA0, 0XFFFFFA8006881DD8, 0 X 0000000000000003, 0XFFFFF800022E3540). I tried twice and both times it ended around 124545 887104. That was 1%. Then I went back into safe mode and some more the object of research and discovered that using the F8 key I could try solve the problem. The second, I pressed the button repair he opted for another blue screen this time with 0X0000007B (0XFFFFF98000A069E0, 0XFFFFFFFFC0000034, the last two are all zeros. I learned that it was Inaccessible boot Device. I tried to use my last known configuration after return in safe mode and that did nothing. I then went to my device because Manager that all the time I did research we're talking maybe a driver is not updated. I discovered that my drivers are all updated, but my IR devices has a triangle attention beside him. When I clicked on properties I found it saying: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). I tried many things, and every time that I have either get a blue screen or my attempt does not work. Please help me, if I can't find a solution, I'll be forced to format my computer and restart my computer life. (email is * address email is removed from the privacy *)

  Hi Killace,

  Step 1

  Try the suggestions in the article below.
  http://support.Microsoft.com/kb/922976

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Step 2

  Uninstall IR device drivers...

  A. Click Start, type devmgmt.msc in the start search box and press on enter.

  B. do the driver right click and choose uninstall.

  C. restart the computer and check if that helps.

  Step 3

  Disconnect all external devices.

  Put your computer in a clean boot.

  The following link has steps showing how to perform the clean boot:

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article:http://support.microsoft.com/kb/929135

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Stop 0x0000007B (inaccessible boot device) on an existing VM Code, not after the conversion of vcenter

  Please forgive any misuse of terminology that I am fairly new to technology - VMware

  I have a VM I created fee-BONES is win2k sp4.  It worked for about a year with no problems.  During the last two weeks, I've created a few additional VM using vcenter to create the P2V. I noticed recently that my original VM that wasn't an import has been planted with the reading blue screen 0x0000007B (inaccessible boot device).  The virtual machine reached the blue screen with the error even after each reboot.

  For fun, I tried to change the bus type of bus to LSI Logic - a reboot always gives the same blue screen when starting upwards. (So I've switched back to logic of bus).  I spent the server ESXi 3.5 in maintenance mode and did a reboot.  No luck again.  Then I tried to start the virtual machine in safe mode - but unfortunately I still get the blue screen and error 0x0000007B.

  Any idea on what I should try next?  Thank you.

  Hi Paul,.

  Welcome to the forums.

  If your virtual machine has worked for a long time, it must be a problem inside the guest OS or a corrupted driver or registry. Be sure to set up the SCSI controller to its original value. You can also have a look at your storage device, in which case there is a bad block on your physical disk.

  If you need to recover data from the virtual machine, you can join his secondary disk to another Windows running as a virtual disk. Otherwise, you can try to reach the installation CD and attempt a repair.

  Good luck.

  Concerning

  Franck

• Quando instalei o windows 8 o erro 0x0000007b inaccessible boot device apareceu o than devo fazer? e essa Carpi ao lado :(

  When I installed windows 8 0x0000007b inaccessible error starting device appeared what should I do? and this guy here following :(

  Here is the Vista Forums.

  Kindly ask in the Windows 8 Forums.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8

  And this is an English language Forum.

  To find the language of your choice please click on the English icon at the bottom of the page and select your language from the Menu that appears.

  See you soon.

• Inaccessible boot device

  restart automatically only in 1 second...

  It worked perfectly yesterday...

  connect my SATA to usb connector, the system disk is not accessible when windows installed...

  F: drive is the system drive and Entertainment Player is his second album (it works perfectly).

  

  But today I was faced with this problem...

  

  Answer Hi,

  Follow the steps to perform a system restore using the installation media:

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.

  (b), select the exact time and the type of keyboard.

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting in choose an option screen.

  (e) click Advanced options in the form of resolution of the problems.

  (f) select System Restore.

  Note: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Please let us know about the status of this issue. We will be happy to help you come.

• Inspiron One 2320 inaccessible AIO, Windows 10 boot device error,

  I have a Dell All In One 2320. When I tried to install windows 10 throughout the system has stopped working. It is now gives me an error of Inaccessible Boot device. what I can do. It worked fine on windows 7.

  Crackers Holy, how horrible a response. Reference Dell... is this seriously the best you can do?

  Devaux, go here, this is a thread on the support site for Microsoft with a lot of information on how to recover your system and get 10 Windows installed: http://bit.ly/1IkgMgU

  Good luck! I have an Inspiron One 2320 also and I do research on potential problems until I update it.

• No boot device

  The message "No boot device - insert boot disk and press any key" came after I partitioned my GB mac/window.

  I understand that with option I can boot into OS X, but I want to fix my installation of bootcamp.

  I use a sandisk usb 2.0 key.

  Help, please!

  Your signature says MBP 2011. Is this correct? If so, 2011 Mbps needing a physical DVD into the optical drive built-in (not external) to install Windows. You can not directly install W10 on 2011 Mbps.

• El Capitan "Don't Update" no boot device

  Hello

  I've updated updated my MBP 2011 end of El Capitan, and now I'm unable to start Windows. The Bootcamp partition is always visible in disk utility, but if I try to start it I get a response of "no boot device."

  Here is my disk configuration:

  

  You can use Re: [help] can't start Windows (8.1) after partition resizing as a reference and rebuild your MBR using GPT Fdisk?

  GPT Fdisk is available at https://sourceforge.net/projects/gptfdisk/ .

• Boot Camp "no boot device."

  My bootcamp partition does not appear in start mode of drive, when starting all holding the key down option .

  Although it appears in disk utility and boot disk.

  When by selecting it from the startup disk, it starts and I get the "error no boot device."

  I tried some other questions similar to this, and I have seen some using gdisk, but I'm not familiar with this package (but I have not installed) and do not want to go to juggle with the MBR or GPT without proper guidance.

  I have attached photos of the MBR and diskutil list in case this is useful.

  

  Gdisk, please after the release of the 'p' (rint) order. All third-party tools used to / resizing of Windows partition?

• Boot camp is no boot device

  Hello community,

  I used to read every forum/discuss before posting, so it's the first time here.

  My config:

  Mac pro 3.1 2008 / Mac osx 10.11 / Boot camp 5 / windows 7 update to windows 10

  I have installed since a year now Bootcamp, windows told me I was able to update windows 10, and they were little good cause I managed to update without any problem, I used windows 10 for a month and have never encounter the difficulties in moving an OS x and windows.

  But yesterday, I needed to format my disk HARD school wich has been used for time machine. Time machine has been disabled for months (because it was full and keeping saying that it was impossible to save) and I needed a free space to use with Windows 10.

  I deleted and format FAT32, this secondary hard drive, so I could not boot into windows, keep showed a black screen with flashing white guest and not any something key.

  If I go to select a restart from a drive, I can choose OS x or bootcamp.

  I can see my partition boot camp on OS X with all data still there, but when I push the button option at the beginning, I have only 2 choices: - Mac OS X - or - restore 10.11 - I don't see my windows startup.

  I tried to download parallels desktop to see if he is able to start my training camp. But parallel shows me "no boot device."

  Can someone help me?

  Thank you.

  Here is some information on installed drive:

  diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 350,2 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 149,0 GB disk0s4

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 160.0 disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Microsoft database disc2 159.8 GB disk1s2

  / dev/disk2 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: FDisk_partition_scheme * 4.0 GB disk2

  1: DOS_FAT_32 DISK_IMG 4. 0 GB disk2s1

  ________________________________________________________________________________ ___

  sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-684078336] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [684487976-1269536]

  04:07 1023 254 63-1023 254 63 [685758464-291014656] HPFS/QNX / TO THE

  ________________________________________________________________________________ __

  sudo TPG - v - r see the/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 684078336 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  684487976 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  952 685757512

  685758464 291014656 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  976773120 15

  976773135 32 table dry GPT

  976773167 1 dry GPT header

  Please remove all drives (internal and external) except the Windows disk after having properly stop your MP.

  A. we need to disable SIP.

  1. boot in local restoration (command-R).

  2. start utility-> Terminal.

  3. type csrutil disable in the Terminal, and then press enter/return.

  4. type csrutil State.

  5 start normally, then type csrutil status to confirm that all of the individual entries are still disabled.

  B. fix the Windows MBR Boot-ability entry. Please ignore the i386 MBR error message, but not others

  sudo fdisk e/dev/disk0

  p

  setpid 4

  07

  Pavilion 4

  p

  w

  There

  Restart and test.

• Bootcamp - no boot device

  Hello

  First of all, sorry for my bad English is not my mother tongue.

  I have a MacBook Pro (late 2011, i7 2, 2 GHz, 320GB HD, 4 GB RAM, Radeon HD 6750 M 512 MB, OS X El Capitan) and I tried to install Windows via Bootcamp 8.1. I changed the info.plist file because my Macbook still have superdrive and could not install bootcamp with a USB key. At this point, no problem. But when the reboot from OS X, appears a message saying: "No boot device - insert boot disk and press any key", that I was wrong? How can I install windows? Now whenever I turn on my Macbook, I must maintain option and select Macintosh HD thanks.

  You must download the W8.1 ISO to your Mac from https://www.microsoft.com/en-us/software-download/home and burn it to a physical DVD. Your Mac 2011 is not compatible USB start correctly. 2012-2014 mac supports USB installers. Change Info.pllist will also cause driver problems.

• Select the boot device appears to casual throw &amp; computer freeze certain functions

  HP Compaq Pavilion 64 bit, windows 7 Home premium

  6 months ago replace hard drive with the drive hard seagate 1 TB 64-bit

  Computer functions started random freezing of microsoft works, don't access the start menu, task bar functions, classifications, etc. all random works poorly but still able to use count in browsing the web. I look at you tube for long periods seems to stimulate the problem. Computer being left pending. Computer freezes seems to disappear spontaneously during use or after sleep or restart.

  Commissioning shows a blue square in the middle of the screen with:

  Select the boot device

  ST 1000 DM003-1 ER162

  HP DVD - Ram GH40L

  F4 amorçage using default

  What boot device use.

  Unplugged the hard drive and turned on pc and hp dvd - ram gh40l was only peripheral boot

  Replaced the motherboard battery already.

  I did the command line; sfc/scannow, HDD and motherboard diagnostics, repair of disks does not.

  One alternative is to reinstall windows 7 with discs or install windows 10 as an alternative.

  Hello @zoboomafoo,

  Thank you for all the information!

  What have been the results of physical tests?  If all the past, then it seems that you encounter problems with the operating system.  If the problem is actually related to the operating system, then by reinstalling Windows will help you solve it.  This should help to address issues with malware.  Upgrade to Windows 10 is an option, however, you don't have full support of drivers.  I hope this helps.

  Kind regards!

• Satellite M50D-A-10W - error "reboot and select proper boot device."

  I have a Toshiba Satellite M50D-A-10W passing me all nuts "reboot and select proper boot device."

  This has happened before and it was solved by ctr-alt-del and F12 to get into the BIOS where the date went back to some time in 2010 - after put so far and to change the boot device, everything worked fine... until the next day.

  Now I get the screen "reboot and select good boot device ', but the F12 key does not; I also tried F2... the message keep multiplying, no BIOS...
  Help, please!

  In some cases the BIOS is only accessible by pressing the button turn off force on the lower side of the unit.

  Info:
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  After that you were able to start the windows system, its highly recommended to update the BIOS as BIOS update would solve this annoying problem.

  Info:
  http://APS2.toshiba-tro.de/KB0/TSB4903N50000R01.htm