Stop 0x0000007B (inaccessible boot device) on an existing VM Code, not after the conversion of vcenter

Similar Questions

• Error 0X0000007B (inaccessible boot Device) to start.

  From two days ago, about 8 or 21:00 my computer freezes whenever I clicked on any icon or attempted to open anything. Not even all that normally appears as yahoo messenger and all my other programs popped up. After this has is spent several times I went to safe mode and thought at first maybe it was something with the memory, or maybe the computer was going slowly I went into cleaning disk and deleted files. Then, I went in my add or remove programs and deleted some things more freeing space. After that happened, I tried again and still no luck. Shortly after, I went back to the security mode and attempted a full McAfee scan for viruses. It took 11-12 hours and there is no virus. Then, I went back into safe mode and tried to do a restore of the system for a few days back. I've tried twice and both times a screen popped up error after about 3 or 4 minutes for system restore. After some research I found this means cessation critical object, so I tried a startup repair, it said 0X000000F4 (0XFFFFFA8006881BA0, 0XFFFFFA8006881DD8, 0 X 0000000000000003, 0XFFFFF800022E3540). I tried twice and both times it ended around 124545 887104. That was 1%. Then I went back into safe mode and some more the object of research and discovered that using the F8 key I could try solve the problem. The second, I pressed the button repair he opted for another blue screen this time with 0X0000007B (0XFFFFF98000A069E0, 0XFFFFFFFFC0000034, the last two are all zeros. I learned that it was Inaccessible boot Device. I tried to use my last known configuration after return in safe mode and that did nothing. I then went to my device because Manager that all the time I did research we're talking maybe a driver is not updated. I discovered that my drivers are all updated, but my IR devices has a triangle attention beside him. When I clicked on properties I found it saying: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). I tried many things, and every time that I have either get a blue screen or my attempt does not work. Please help me, if I can't find a solution, I'll be forced to format my computer and restart my computer life. (email is * address email is removed from the privacy *)

  Hi Killace,

  Step 1

  Try the suggestions in the article below.
  http://support.Microsoft.com/kb/922976

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Step 2

  Uninstall IR device drivers...

  A. Click Start, type devmgmt.msc in the start search box and press on enter.

  B. do the driver right click and choose uninstall.

  C. restart the computer and check if that helps.

  Step 3

  Disconnect all external devices.

  Put your computer in a clean boot.

  The following link has steps showing how to perform the clean boot:

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article:http://support.microsoft.com/kb/929135

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Quando instalei o windows 8 o erro 0x0000007b inaccessible boot device apareceu o than devo fazer? e essa Carpi ao lado :(

  When I installed windows 8 0x0000007b inaccessible error starting device appeared what should I do? and this guy here following :(

  Here is the Vista Forums.

  Kindly ask in the Windows 8 Forums.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8

  And this is an English language Forum.

  To find the language of your choice please click on the English icon at the bottom of the page and select your language from the Menu that appears.

  See you soon.

• Satellite on L9W - B Mini - Inaccessible Boot Device

  Hi all

  I installed win10 and decided to do a complete reset that I gave this computer to someone else to use.
  After the reset, it does not start properly and fails with an "inaccessible boot device message".

  I created a USB boot with a version of win8.1 to install, but no touchscreen or keyboard works, so I can't go ahead with the installation.

  someone had this problem? I want to refer to toshiba that I'm tired of this device

  Thank you

  Hi, I installed Windows 10 and reset mine causing this problem, it seems Windows 10 upgrade does not work properly.

  The drivers for the keyboard and touchscreen are not standard, so are not integrated to the version 8/10 bootable usb. You can get a normal usb hub usb microphone and plug in a usb keyboard/mouse to go or if you have created a recovery drive as Toshiba tell you in the instructions it will actually contain the right key drivers.

  To boot from the recovery disc press FN N (F12) as soon as the machine is running and the Toshiba logo shows, and he will give you the option of what to start from.

• Inaccessible boot device error. New motherboard.

  De : Meigs

  I'm changing my motherboard that supports the quad core processor. However, I get an inaccessible boot device error when I try to boot with the new motherboard. I tried to boot from the installation dvd and repair, but it cannot solve the problem.

  I don't want to perform a new installation. It was easy with WinXP pro. The cd should solve the problem. But, I can just know how to do this with Windows Vista.

  Is there a way to get the registry to look for new drivers? It may not be a big problem since the installation DVD to see the drive with any action on my part.

  From: Rick Rogers

  Hi Meigs,

  Sorry, but change the motherboard in most cases it will take a reinstall. The exception would be a card replacement or one that is very closely related. XP could affect a repair installation, it is not possible in Windows Vista due to changes in the way the operating system is built on the hard drive.

  Moreover, the error message at startup is likely, given that the new motherboard uses a driver different thant previous to load the hard disk.

  --

  Good luck

  Another response of the community of Windows Vista discussion groups

• How can I stop Vista to boot into safe mode? Vista does not meet F8 when starting upwards.

  How can I stop Vista to boot into safe mode? Vista will not run on F8 before Windows starts.

  Update: I did system restore and still Vista boot in safe mode. More, start > run > "msconfig" > tab "Startup" and "Safeboot" was not selected. Any other suggestions?

  Vista still restarts in safe mode. 'Safe Mode' will now appear in the four corners of the screen and "Microsoft (R) Windows (R) (Build 6001: Service Pack 1)" appears at the top to the center of the monitor. ???

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• "Windows cannot access the specified device or file. You can not have the appropriate permissions to access the item. "When you try to open a. EXE file.

  Windows cannot access the specified device or file. You can not have the appropriate permissions to access the item.

  Well, I was on my computer, I tried to open an exe file and I got this message

  Windows cannot access the specified device or file. You can not have the appropriate permissions to access the item.

  I have windows xp, anyone have an idea what to do?

  Hi Reaper14,

  ·         The question is limited to this particular .exe file?

  ·         You can open other files very well?

  If you are unable to open a .exe file, refer to the following article.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Click on the link below.

  Cannot open EXE files

• Some of my programs does not open. It indicates a problem exists but is not described the problem.

  I have a Hallmark Card Studio, which no longer opens. It indicates there is a problem, but don't tell me what the problem is.  It has been reported, but I get no answers.  Lately, some of my other downloads will not open either.  How can I fix it?

  Hello

   
  Were changes made to the software or hardware of the computer before the show?
   
  Perform a clean boot and check if the problem still persists. Follow the steps mentioned on the Web page that the link is provided below.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Restart the computer and check if you are able to boot into Normal Mode.
   
  Note: After you have finished troubleshooting follow step 7, mentioned on the web page for the computer to boot into normal mode.

• On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "Please help

  On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "This message appears for firefox, AVG, Windows live messenger, windows MediaPlayer etc.

  I can access my documents, Panel etc. and everything is there, but it won't let me not get access to the programs.

  Also when I go to click on itunes and open office it happens "this file has no program associated with it for performing this action. Create an association in the set associations Control Panel.

  Given that I was able to access control panel, I was able to create a new user and use it for now to send this message and all programs have worked on it and I was able to check for the presence of viruses on the Avg on this and everything was clear.

  Could you please explain whats wrong and tell me how to fix this please: D thanks

  Hello
   
  1. don't you make changes before the show?
  2. is the computer is joined to the domain controller?
   
  You can not start any application on a client computer that is joined to the domain controller. When you try to start this type of application, you receive an error message similar to the following:
  "Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  This can also occur if the user account is damaged. If the computer is not connected to a domain controller, try the following steps.
  1. connect to another user account and create a new user account to fix the damaged user account.
  For more information about creating a new user account and the fixing corrupt user account, visit this link: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile
   
  Previous post the results in more detail, so that we can help you further.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• A problem with cc libraries "the file does not exist, you may not, or the file may be in use by another application".

  I'm working on our catalogue on INDesign CC 2015, I have a links to my libraries, I worked every day without any problem. I work on a Mac and Win system, I put the file on my disk hard or on files of cc.

  2 days ago, I opened the file and as a result with any missed links, when I tried to re-link on my library the program shown Indesign files missed this message "the file does not exist, you may not, or the file may be in use by another application", I contacted Italian cat Adobe they suggested me to change the name of the file I did but nothing happened, they suggested to create a new owner of the computer, but it did not work because I work within a team and the file is opened to others of collaboration. I have 333 links so what I shell do? Please help me, I have to finish this work, we need print it out as soon as possible.

  I had this problem after an Indesign file that we've been working on the opening of my colleague. She has made a few changes and then when I went back to work on the file of the library of all the links were broken and I had him "you don't have to leave."

  I've corrected the problems by opening Illustrator and rename the library. InDesign revived and everything from the library was connected properly.

• DV7-4180us giving msg No. Boot Device or n, HDD, Win7 does not start.

  Well, I think I've reached the beginning of what may be a serious problem. I've been away for 9 months and my laptop had been stored in his bag all the time not used with the battery disconnected. I went 2 weeks ago and it had been fine until last Saturday. I started it upwards and once the logon screen Win7 and logging frozen inside, and the screen went black. I have it turned off and restarted, and then he came up with the error message "No. Boot Device" as if Win7 is no longer installed. I ran several virus scanners and they came back without anything, I'm sure that this is not a virus, I mean I have not yet downloaded something long because before my departure other than all of the updates, I missed. I tried to reset the BIOS to factory default and use PC tune-up AVG to fix all the errors, but I'm still having this issue.  Funny, it is sometimes the laptop runs and sometimes it won't so I think this load default Win7 will progressively get worse? Not really sure cause I'm not very technical with laptops.

  I tried to run the test drive in the BIOS when it does not load, but it is just like "No hard drive detected" every time, but it passes the test of memory.

  The reason why I'm here is to know what are my options to resolve this problem, so far the only thing that I can think of is to replace the HARD drive and reinstall Win7 but I want to make it as painless as possible, or see what others can suggest.

  I have no disc for reinstallation of Win7 or any similar to disks. My laptop is out of warranty. I know that I have the Local disk drive (c :)) and also the recovery disk (D :).)  My hard drive is a TOSHIBA MK6465GSX.

  Some of my questions are when I take off the Toshiba HDD that will of course remove the (C :) drive BUT it will also delete my recovery disk (D :)? * see link below for what players I have *)

  http://img255.imageshack.us/img255/315/compcx.PNG

  Should I replace the HARD drive I have to reinstall Win7 correct?

  Hello

  A safe and fast way is to clone your HARD drive when it is until running, it means you have the same OS, drivers, software. All you need is the same size or more (capacity) of HARD drive and cloning software. You can find some free cloning software in the following list:

  http://DownloadSquad.switched.com/2008/09/05/5-free-apps-to-clone-your-hard-drive/

  I hope this helps.

• Mac stops do not after the update of the sierra

  I've updated my MacBook Air (13 inches early 2015) to Sierra. After the update, it is not shut down or restart. If I click on stop, my screen goes black and the keyboard backlight is on. The judgment never ends. Its the same case on reboot too.

  Help, please. Thank you.

  Although this will help, but I have also reported this problem, like many other people:

  MacBook Air shutdown correctly

  macOS Sierra presents a serious problem that must be dealt with quickly

  Apple should give a direct response to this because it is obviously not an isolated incident.

• Why my drive hard Boot keep reading and writing for 20 minutes after the start?

  As the title says my HDD Boot continues to read and write for about 20 minutes after the start. Read and write up to 10 GB in the process. I would say a good way to destroy a disc. I have not seen this behavior in any other OS.

  10.10.5 OS version

  Model: Mac Pro

  ID: MacPro3, 1

  Processor: Intel Quad-Core Xeon

  Number of processors: 2

  Total number of cores: 8

  (Vivid RAM) memory: 8 GB

  Any help will be greatly appreciated.

  Thank you.

  Check Console.app and see what happens.   Could be something of a time Machine for Spotlight indexing to a process of runaway of an OS X or a bug in the application.

• Problem with Windows Search 'Windows cannot access the specified device, file, or path. May not be the appropriate permissions for access you to computing.

  I have a very annoying problem:

  
  OT: Problem with Windows Search
  When I try to use Windows Search in the menu start I get the message "Windows cannot access the specified device, file, or path. May not permissions to access you the item. I get this message no matter what I type in. Therefore, I can't find something on my computer and continually to achieve this result.
  Could someone please help me solve this problem?
  I tried what answers I could find other peoples messages online, nothing helps. I'd appreciate any help.
  Thank you very much.

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244

• Inaccessible boot device

  restart automatically only in 1 second...

  It worked perfectly yesterday...

  connect my SATA to usb connector, the system disk is not accessible when windows installed...

  F: drive is the system drive and Entertainment Player is his second album (it works perfectly).

  

  But today I was faced with this problem...

  

  Answer Hi,

  Follow the steps to perform a system restore using the installation media:

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.

  (b), select the exact time and the type of keyboard.

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting in choose an option screen.

  (e) click Advanced options in the form of resolution of the problems.

  (f) select System Restore.

  Note: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Please let us know about the status of this issue. We will be happy to help you come.