Satellite on L9W - B Mini - Inaccessible Boot Device

Similar Questions

• Inaccessible boot device error. New motherboard.

  De : Meigs

  I'm changing my motherboard that supports the quad core processor. However, I get an inaccessible boot device error when I try to boot with the new motherboard. I tried to boot from the installation dvd and repair, but it cannot solve the problem.

  I don't want to perform a new installation. It was easy with WinXP pro. The cd should solve the problem. But, I can just know how to do this with Windows Vista.

  Is there a way to get the registry to look for new drivers? It may not be a big problem since the installation DVD to see the drive with any action on my part.

  From: Rick Rogers

  Hi Meigs,

  Sorry, but change the motherboard in most cases it will take a reinstall. The exception would be a card replacement or one that is very closely related. XP could affect a repair installation, it is not possible in Windows Vista due to changes in the way the operating system is built on the hard drive.

  Moreover, the error message at startup is likely, given that the new motherboard uses a driver different thant previous to load the hard disk.

  --

  Good luck

  Another response of the community of Windows Vista discussion groups

• Error 0X0000007B (inaccessible boot Device) to start.

  From two days ago, about 8 or 21:00 my computer freezes whenever I clicked on any icon or attempted to open anything. Not even all that normally appears as yahoo messenger and all my other programs popped up. After this has is spent several times I went to safe mode and thought at first maybe it was something with the memory, or maybe the computer was going slowly I went into cleaning disk and deleted files. Then, I went in my add or remove programs and deleted some things more freeing space. After that happened, I tried again and still no luck. Shortly after, I went back to the security mode and attempted a full McAfee scan for viruses. It took 11-12 hours and there is no virus. Then, I went back into safe mode and tried to do a restore of the system for a few days back. I've tried twice and both times a screen popped up error after about 3 or 4 minutes for system restore. After some research I found this means cessation critical object, so I tried a startup repair, it said 0X000000F4 (0XFFFFFA8006881BA0, 0XFFFFFA8006881DD8, 0 X 0000000000000003, 0XFFFFF800022E3540). I tried twice and both times it ended around 124545 887104. That was 1%. Then I went back into safe mode and some more the object of research and discovered that using the F8 key I could try solve the problem. The second, I pressed the button repair he opted for another blue screen this time with 0X0000007B (0XFFFFF98000A069E0, 0XFFFFFFFFC0000034, the last two are all zeros. I learned that it was Inaccessible boot Device. I tried to use my last known configuration after return in safe mode and that did nothing. I then went to my device because Manager that all the time I did research we're talking maybe a driver is not updated. I discovered that my drivers are all updated, but my IR devices has a triangle attention beside him. When I clicked on properties I found it saying: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). I tried many things, and every time that I have either get a blue screen or my attempt does not work. Please help me, if I can't find a solution, I'll be forced to format my computer and restart my computer life. (email is * address email is removed from the privacy *)

  Hi Killace,

  Step 1

  Try the suggestions in the article below.
  http://support.Microsoft.com/kb/922976

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Step 2

  Uninstall IR device drivers...

  A. Click Start, type devmgmt.msc in the start search box and press on enter.

  B. do the driver right click and choose uninstall.

  C. restart the computer and check if that helps.

  Step 3

  Disconnect all external devices.

  Put your computer in a clean boot.

  The following link has steps showing how to perform the clean boot:

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article:http://support.microsoft.com/kb/929135

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Stop 0x0000007B (inaccessible boot device) on an existing VM Code, not after the conversion of vcenter

  Please forgive any misuse of terminology that I am fairly new to technology - VMware

  I have a VM I created fee-BONES is win2k sp4.  It worked for about a year with no problems.  During the last two weeks, I've created a few additional VM using vcenter to create the P2V. I noticed recently that my original VM that wasn't an import has been planted with the reading blue screen 0x0000007B (inaccessible boot device).  The virtual machine reached the blue screen with the error even after each reboot.

  For fun, I tried to change the bus type of bus to LSI Logic - a reboot always gives the same blue screen when starting upwards. (So I've switched back to logic of bus).  I spent the server ESXi 3.5 in maintenance mode and did a reboot.  No luck again.  Then I tried to start the virtual machine in safe mode - but unfortunately I still get the blue screen and error 0x0000007B.

  Any idea on what I should try next?  Thank you.

  Hi Paul,.

  Welcome to the forums.

  If your virtual machine has worked for a long time, it must be a problem inside the guest OS or a corrupted driver or registry. Be sure to set up the SCSI controller to its original value. You can also have a look at your storage device, in which case there is a bad block on your physical disk.

  If you need to recover data from the virtual machine, you can join his secondary disk to another Windows running as a virtual disk. Otherwise, you can try to reach the installation CD and attempt a repair.

  Good luck.

  Concerning

  Franck

• Satellite showing C55-5-137: no boot device please don't restart

  Hello
  Just bought a computer portable satellite c55-5-137 and when I start the computer shows this message: no boot device - please reboot the system.
  Tried to boot from usb win7, same message. Also in bios I don't have the option to disable secure boot, the only option is uefi (grayed out). Need help .

  I assume that the HARD drive is not visible somehow for your system.
  When you enter the BIOS disk HARD is listed and detected correctly?
  Try to set the BIOS to default settings and check again.

• Satellite C660-IHK - 'Reboot & Select good Boot device'

  First of all, thanks for any help. I don't know anything about the inner workings of computers, so things, please explain to me how you would do for a baby! Here's the problem: my Satellite C660-IHK is one month. I have not much used, nor had any problem with it. Until last night. I turned it on, the logo appeared as usual, and then it went to a screen that tells me to "Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key. I have no idea what that means or what I should do now.

  On another chance, I pressed 'Set Up', which was located at the bottom of the screen when the logo first appeared. I went to 'Boot '. Here is the info:

  HDD/SSD
  USB
  WEIRD MATHITADVD-RAM UJ8BO
  FLOPPY DRIVE
  LAN Realtex PXE

  On this page, I am also told "choose the priority of the computer starts". Again, I don't know what it should be. Any help would be appreciated.

  Thank you

  You see this message every time when you start your laptop?

  It's a little strange.
  Start your laptop and press F2 to enter the BIOS settings. Use F9 and set it to check and default settings, if the problem persists or not.

  If Yes, restart your laptop and press F12 to get into the boot menu. Check if the HARD drive is listed there. If Yes, select it and press ENTER. Windows starts correctly?

• Satellite C650D problem hard drive - no boot device

  No boot device, please insert the boot disk and press any key any... and yet once again and again.

  It is not a problem to make a recovery, but it is each to come a few days again.picture freezes, everything stops, and the black window is forthcoming with this info...

  And of course support Toshiba does not Saturday... any solution for this weekend?

  I fear you're right m.

  If you n t know how to find nearest provider for service Toshiba Toshiba support page visit - http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

• Satellite L750 - no error at startup boot device

  When you try to start my Satellite L750/755, I get an error no. Bootable Device.

  Before I try any recovery, is it possible to remove the HARD drive and connect it to my other PC so that I can get all my pictures, music, etc. it. If so, do I need.

  I have it on my old desk, and bought a HARD drive with a USB caddy, if disk HARD just looked like an external drive.

  Thank you very much

  Tim

  Yes, you can remove the HARD drive and connect it to your other laptop / PC with USB HDD external enclosure. With the help of this forum you can connect your HARD drive as an external device that must be recognized and listed in the Windows Explorer, so you can have full access to all your stored data.

  Back up all your data and put the HARD drive in your laptop.

  Usually, if there is not a hardware problem you can start your laptop and press F12 to get into the boot menu. When the boot menu appears on the screen that you can put the recovery disk of information optical disk drive, choose the CD/DVD drive and press ENTER. After making this optical drive should start the disc and start to copy the data to the HARD drive.

  What you can do before you start using the recovery disc is to enter the BIOS and set it to default settings.

  Please try it and send feedback.

• Quando instalei o windows 8 o erro 0x0000007b inaccessible boot device apareceu o than devo fazer? e essa Carpi ao lado :(

  When I installed windows 8 0x0000007b inaccessible error starting device appeared what should I do? and this guy here following :(

  Here is the Vista Forums.

  Kindly ask in the Windows 8 Forums.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8

  And this is an English language Forum.

  To find the language of your choice please click on the English icon at the bottom of the page and select your language from the Menu that appears.

  See you soon.

• Satellite on L9W - B Mini - touch pad does not

  Hello

  I recently bought a Toshiba mini click, and I think my touchpad is defective because it does not at all, does not meet the clicks or movement and never has.

  I tried to reinstall the 3 different versions of the driver swing.
  I tried to reset the bios,
  I did update the bios,
  I tried just the standard Microsoft driver
  Connected and disconnected a thousand times
  Fully charged both
  Also tried F5.

  Still can't make it work, any advice?

  See you soon
  Sam

  Hmm... It could be a hardware problem, but what about the system recovery?

  Retrieve the computer laptop back to factory settings and check the touchpad feature directly after the aircraft was recovered and the factory settings.

  For the most part, in case of software problems, this recovery procedure should solve your problem...

• Re: Unable to get the Satellite L650 for system and inaccessible boot repair

  Computer laptop satellite L650 ~ Windows 7.

  I have problems with the laptop being very slow to start for several months until he was able to start. It took to PC World and they said I had a virus and they had reinstalled the software back to the HDD factory settings. Worked well for a few weeks as falied to start. Restored from Windows recovery option by pressing F8 at startup upward. Worked fine for a few weeks until last week. Repeat the process and works very well.

  Monday, I installed Adobe Photoshop and Tuesday night cell phone has been slow to start up again, so uninstalled Photoshop. Stop it installed some updates of Windows. Last night, when I walk it came with a messgae saying doing xxxxx of the registry changes, and then could not start. Now when I press F8 and select "Repair your computer" Windows starts to load files and then get to the System Recovery Options ~ Select UK keyboard and press next and then I get a window saying: "you must login to access the System Recovery Options. If you havingtrouble connect, contact your administrator for the computer for assistance. Click OK to restart the computer. »

  I did not have this on reinstalls previous and I can't get around it. Help!

  Hello

  In the past, I got several laptop computers several times and this option is still available. Please check follow document - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm - Toshiba and you will see that this option is available.

  If you have created a Windows login password you must use it, otherwise leave it blank and just press OK. Don t change same keyboard layout just click on next.

  Please let us know if you've had success with it. E later can discuss how do for faster laptop to start.

• Inaccessible boot device

  restart automatically only in 1 second...

  It worked perfectly yesterday...

  connect my SATA to usb connector, the system disk is not accessible when windows installed...

  F: drive is the system drive and Entertainment Player is his second album (it works perfectly).

  

  But today I was faced with this problem...

  

  Answer Hi,

  Follow the steps to perform a system restore using the installation media:

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.

  (b), select the exact time and the type of keyboard.

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting in choose an option screen.

  (e) click Advanced options in the form of resolution of the problems.

  (f) select System Restore.

  Note: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Please let us know about the status of this issue. We will be happy to help you come.

• U530 inaccessible boot device

  My laptop will move after the start-up of the screen always go to the frowny face screen. Help, please.

  I found the hard drive, it is followed by a series of numbers and letters.

• Inspiron One 2320 inaccessible AIO, Windows 10 boot device error,

  I have a Dell All In One 2320. When I tried to install windows 10 throughout the system has stopped working. It is now gives me an error of Inaccessible Boot device. what I can do. It worked fine on windows 7.

  Crackers Holy, how horrible a response. Reference Dell... is this seriously the best you can do?

  Devaux, go here, this is a thread on the support site for Microsoft with a lot of information on how to recover your system and get 10 Windows installed: http://bit.ly/1IkgMgU

  Good luck! I have an Inspiron One 2320 also and I do research on potential problems until I update it.

• Satellite M50D-A-10W - error "reboot and select proper boot device."

  I have a Toshiba Satellite M50D-A-10W passing me all nuts "reboot and select proper boot device."

  This has happened before and it was solved by ctr-alt-del and F12 to get into the BIOS where the date went back to some time in 2010 - after put so far and to change the boot device, everything worked fine... until the next day.

  Now I get the screen "reboot and select good boot device ', but the F12 key does not; I also tried F2... the message keep multiplying, no BIOS...
  Help, please!

  In some cases the BIOS is only accessible by pressing the button turn off force on the lower side of the unit.

  Info:
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  After that you were able to start the windows system, its highly recommended to update the BIOS as BIOS update would solve this annoying problem.

  Info:
  http://APS2.toshiba-tro.de/KB0/TSB4903N50000R01.htm